my State is incorrect
Live in New Jersey and MacBook Air lists me in Southampton, New York. How to solve this problem?
Try system preferences > Date & time > time zone.
Tags: Notebooks
Similar Questions
-
360 11 X - n012na: STATE GUARANTEE INCORRECT
Yet, new laptop froze and crashed. This time it does not restart. Followed the instructions how to access recovery before contacting hp this morning. No problem would discuss with my record shows laptop is out of warranty. I contacted hp several months ago and was told something sent receipt copy scanned said said the recording had been updated to reflect the status of the guarantee of good. It's gotta be the worst laptop computer purchase ever, I spend most of my time trying to resolve slow performance issues and options of recovery because of the laptop is freezing or crashing. Please can a representative competent HP contact me first to confirm the status of the guarantee has been corrected and secondly how do I return via laptop under warranty.
I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display personal information (serial numbers and information).
Thank you for visiting the Forum from HP Support.
-
Photos turn incorrectly when loading in the widget gallery
It's weird and I can't understand why - but photos turn all different ways when loading in a widget to the gallery. Some are upside down or sideways, for example. I opened all preview images before loading, and they are all right to the top as it should. I can rotate the thumbnails individually but it will take forever, and that still leaves the lightbox images at full size in their State of incorrect rotation.
I'm doing something wrong? Is there something I can do to fix this or prevent it from happening? I want to emphasize that it is only THE images, not all. No real rhyme or reason as far as I can tell.
Thank you!
This happens often with photos of smartphone or table, if the device is held "incorrect" (= from left to right, right to left).
Just try to re-save the images with an imaging software. There are applications that enable to reset the indicator of orientation within the image file.
-
I have a table that looks like this
Specification of Test assets Item_number...
1111 0
2222 1
3333 1
4444 1
If I run after the opening of the database.
iTableHandle = DBActivateSQL (iDatabaseHandle, "SELECT * FROM tblTest WHERE active = 1 AND ItemNumber = '5555'");
DBActivateSQL returns a value same 3 if I replaced with 4444 5555.
Should not DBActivateSQL returns an error because it did not find anything? I want to fail if the user enters the number of wrong or is inactive.
Paul,
I don't think that the function should give an error, it's simply not find anything. It would give an error if the SQL statement is incorrect or if you were trying to access a column that does not exist, but not if your WHERE clause returns no value. You need set up your DBBinds, then call DBFetchNext. You might have a logic in your code to display an error if the first call to DBFetchNext does not return 0 (indicating no record not found) and then allow your user to enter a different number.
-
Optical drive internal appearing as a removable device
I recently bought an operation of Dell Latitude E6420 used Windows 7 Ultimate 64 - bit (SP1) and I am also very happy with it. But after I finished installing all the drivers that have been recommended since the Dell Web site, he developed an unusual problem: the optical drive (PLDS DVD +-RW OF THE - 8A3S) appears as removable material, even if it's not, and if I "eject" it, I need to restart the system before it works again.
This did not happen before on this machine and is the first time that I've ever known a problem like that, never. My mother and a friend also bought the same model at the same time - there is a similar problem on my mother (also Win 7 x 64) machine but not on the computer of my friend (8.1 Win x 64).
I figured that maybe that's a problem of driver, but re - install the driver from the optical device and even do a system restore didn't fix it. I also found some information of Microsoft Windows Hardware Dev Center Archive, which States:
Incorrect configuration of SATA
Incorrect configuration of SATA may appear in the following situations:
- If the system incorrectly identifies a SATA port internal as external, Windows disables LPM on this port, and therefore can not save on the port. In addition, Windows treats the internal non-removable device that is connected to this port as a removable device. For example, it appears in the device safely remove dialog box in the toolbar State system and in devices and printers.
- If an external SATA port is not properly configured, it is possible for a device that is connected to the port to be considered non-removable and therefore do not attend the safely remove an instrument dialog box in the toolbar State system and in devices and printers.
If an internal SATA port is incorrectly configured as a port external SATA, a system vendor or administrator can fix without updating the BIOS OF THE system or the Windows software.
To work around this problem, you can disable external SATA support on a per track basis by setting the value of the TreatAsInternalPort registry key to 1, and then restart the system.
If the system has internal and external SATA ports, but a device that is attached to a port internal SATA appears in the dialog box safely remove devices in the system tray or in devices and printers, you should reset the registry key for the port.
I could not find the registry key mentioned and I am reluctant to change the registry without being certain of what it is I'm supposed to do. Someone solved a similar problem and any help please?
Hi, Fatima.
I think that most portable DVD players are actually removable and should be displayed as such. "Eject" to disable the device, but pulling out and plugging it back in should restore the functionality.
-
Copy a contact field to another field of contact through program Builder?
We receive many States cited incorrectly in the country field. I am trying to clean up these data, if I want to do is take what is written for the country and put in the domain of the State (if the status field is not populated with a few other gibberish!). I don't know how to do this. Any ideas how to do this?
Apply update rules. This will allow you to do excatly what you are looking for... You should be able to find many documents on Topliners and Eloqua Customer Central.
Thank you
Amit Pandya
-
Questioning ADDM recomentation memory
Hi all
I was going by recommendation ADDM and came across this:
Results: The SGA has been badly calibrated, causing additional i/o or hard analysis
Action: Increase the size of the SGA by setting the parameter "30720M.
Size of SGA is currently 20395M
I checked use SGA and PGA for the last month:
-Gets number of hits when the memory usage is less than 5% of memory available max LMS
Select SNAP_ID, INSTANCE_NUMBER, USED_MB
FROM (select SNAP_ID, INSTANCE_NUMBER, sum (round(bytes/1024/1024,0)) USED_MB
of DBA_HIST_SGASTAT
WHERE name! = 'free mΘmoire '.
Group of SNAP_ID, INSTANCE_NUMBER)
WHERE USED_MB > (by selecting round ((sum (VALUE) / 1024/1024/100) * 95, 0) in v$ sga)
/
no selected line
-Gives me max using SGA for the last month
Select INSTANCE_NUMBER, max (USED_MB)
FROM (select SNAP_ID, INSTANCE_NUMBER, sum (round(bytes/1024/1024,0)) USED_MB
of DBA_HIST_SGASTAT
WHERE name! = 'free mΘmoire '.
Group of SNAP_ID, INSTANCE_NUMBER)
INSTANCE_NUMBER group
/
INSTANCE_NUMBER MAX (USED_MB)
--------------- ------------
2 19002
1 18783
3 18985
If BMG never went more 18985 M instance within the last month
Then I started thinking about the PGA
Size of the PGA is currently at 4 GB
Same set of queries (but with PGA):
-Gets number of hits when the memory usage is less than 5% of memory available max PGA
Select SNAP_ID, INSTANCE_NUMBER, USED_MB
FROM (select SNAP_ID, INSTANCE_NUMBER, sum (round(value/1024/1024,0)) USED_MB
of DBA_HIST_PGASTAT
where name = 'total inuse PGA.
Group of SNAP_ID, INSTANCE_NUMBER)
WHERE USED_MB > (select round ((sum (VALUE) / 1024/1024/100) * 95, 0) from v$ pgastat, whose name = "aggregate target PGA parameter")
/
Number of rows returned here...
-Gives me max use PGA for the last month
Select INSTANCE_NUMBER, max (USED_MB)
FROM (select SNAP_ID, INSTANCE_NUMBER, sum (round(value/1024/1024,0)) USED_MB
of DBA_HIST_PGASTAT
where name = 'total inuse PGA.
Group of SNAP_ID, INSTANCE_NUMBER)
INSTANCE_NUMBER group
/
INSTANCE_NUMBER MAX (USED_MB)
--------------- ------------
3-1553
2 1649
1 7877
Instance etc. we PGA TOTAL running went in close to 8 GB
Should I be not increasing the PGA rather than the LMS?
If my select statements are incorrect please let me know
Concerning
G.
Understood why Oracle recommends SGA increase
Parsed hard on nodes 1 and 2 were ok, 3.8% and 0.06% respectively
But in node 2, hard analysis is at 12.1%
As a result, the oracle of reason recommended this.
I still don't understand why the use of the LMS was not maxed out, however.
I would have thought that:Select SNAP_ID, INSTANCE_NUMBER, USED_MB
FROM (select SNAP_ID, INSTANCE_NUMBER, sum (round(bytes/1024/1024,0)) USED_MB
of DBA_HIST_SGASTAT
WHERE name! = 'free mΘmoire '.
Group of SNAP_ID, INSTANCE_NUMBER)
WHERE USED_MB > (by selecting round ((sum (VALUE) / 1024/1024/100) * 95, 0) in v$ sga)
/
Would have returned at least one line.
Maybe I need to narrow it down to 90% instead of 95%In any case I'll add memory on all nodes
For all those who are interested:
SQL > INST_ID select, name, value
2 gv$ sysstat
3 WHERE name = 'parse count (total)'
4 or name = 'parse count (hard).
5.
INST_ID NAME VALUE
---------- ---------------------------------------------------------------- ----------
2 analysis count 73538108 (total)
2. analyze the County 36760147 (hard)
3 analysis count 152131576 (total)
3 analysis County 114045 (hard)
1 analysis count 860962865 (total)
1 analysis County 11106572 (hard)
6 selected lines.
SQL > exec DBMS_LOCK. SLEEP (360);
PL/SQL procedure successfully completed.
SQL > INST_ID select, name, value
2 gv$ sysstat
3 WHERE name = 'parse count (total)'
4 or name = 'parse count (hard).
5.
INST_ID NAME VALUE
---------- ---------------------------------------------------------------- ----------
3 analysis count 152184466 (total)
3 analysis County 114082 (hard)
2 analysis count 73538835 (total)
2. analyze the County 36760235 (hard)
1 analysis count 860980050 (total)
1 analysis County 11107238 (hard)
6 selected lines.
-
where he auditioning cc store files peak?
Hello
I'm under cc hearing under w8.1 pro 64-bit
in the preferences-> audio-> I activated the automatic generation of peak
well may I know where cc stores these files peak?
because I used total Commander and sought .pk and .pkf but nothing, there is no files with the extension in all my hard drives
Thank you
Both of your statements are incorrect, I'm afraid. On large files, .pkf files can speed up the opening of their considerably, even if you don't notice big difference on a smaller.
MP3 files do not support .pkf files at all. If you think that you found them compared to an open file, it will be because that hearing created one for the decoded MP3 (IE a wav file) that she used - it cannot directly open MP3 files.
-
Problem-solving PC - screen border
KDL-46EX400. I have my PC connected via an HDMI cable. While the PC is booting, it is clear that the signal fills the screen because of the color to the large black that surrounds the Dell logo. Once the machine is fully charged, however, the TV shows 'screen select has Changed' self: (graph) and an about 1.5 "black border appears around the screen; That is to say the image is is no longer in the screen.
I tried solutions:
Changing the resolution. No matter what resolution, I put the PC, the border is of the same size. Edit: this statement was incorrect, the border size changes, but no resolution fills the screen
Play with the settings of the image on the TV. Modes of zoom strech all the image beyond the screen size. It is not a good resolution anyway, because the TV automatically returns the settings whenever the TV is turned on or the resolution is changed.
The Firmware was updated. Has not changed anything.
I know this is a common problem, but none of the solutions I've read so far have worked for me. Any ideas? I can provide more information if necessary.
Yes they both supported.
I was able to find a solution to the problem. My video card and TV appearently don't synchronize signals of resolution very well. I had to put overscan on 0 in the Catylist Control Center application, but for this I had to reduce my 1680 by 1050 resolution so that the option to change the overscan setting was not greyed out (it is grayed out because the CCC assumes that, because the relolution is set to one of the natives of the TV option should not be necessary). Guess I'd rather have these 4 "(diagonally) as the additional pixels."
-
How to report a bug? is this a bug?
Hi all
my Oracle 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production database does not allow me to run this command
ALTER table my_schema. MY_TABLE_1
Add CONSTRAINT FK_PASSAGGIO_STATO_OUT
FOREIGN KEY (IDSTATODA, IDSTATOA)
REFERENCES my_schema. MY_TABLE_2 (ID, ID);
But if I divide it into 2 constraints, it works:
ALTER table my_schema. MY_TABLE_1
Add CONSTRAINT FK_PASSAGGIO_STATO_OUT_DA
FOREIGN KEY (IDSTATODA)
REFERENCES my_schema. MY_TABLE_2 (ID);
ALTER table my_schema. MY_TABLE_1
Add CONSTRAINT FK_PASSAGGIO_STATO_OUT_A
FOREIGN KEY (IDSTATOA)
REFERENCES my_schema. MY_TABLE_2 (ID);
someone can tell me if this is a bug and where can I report it?
Thank youIt seems that you have two columns which both refer to the primary key of another table, independent of the other.
This means that your statement is incorrect on the conceptual level, and you need two constraints.Thus, it is not a bug and Oracle is right.
---------------
Sybrand Bakker
Senior Oracle DBA -
Adobe Arabic do not call the final form of the Arabic text?
Hello
I'm creating a journal that is mostly in English, but has an article in Arabic. I use InDesign CS5.5ME and uses Adobe Arabic for the Arabic text 2.006.
I have a situation in which it appears that InDesign reads a diacritical mark in the middle of a Word as an indication that the word has come to an end.
In the screenshot below, you can see that the heh ending at each of these four words is preceded by a dal with one or two diacritics. It seems that the diacritics speaker causes InDesign to assume the word is finished, and it is affecting the heh using its isolated form. What my editor tells me, it's the heh must be set using its final form.
When I change the police for another font with Arabic characters - say X Davat or Times New Roman - the heh correctly takes its final form.
This leads me to believe that some police - perhaps connected to the diacritic - statement is incorrect. In InDesign settings appear to be correct (otherwise, the problem would appear in other fonts, too). Can anyone else reproduce this problem? Does anyone know if Adobe Arabic 2007 solves this problem (assuming it's a bug)?
Thanks for any help.
Thanks for your help, Miguel.
For anyone who has followed this thread, Miguel helped me discover that InDesign was load an earlier version of the police. While I thought that I had loaded v2.006, I actually had not, so InDesign 'found' a version and that in its place. I'm still trying to understand loading where the old version, but now, when I'm sure I have loaded version 2.006, InDesign built correctly the words using the correct characters.
To find out which version of the police has been actually used in my paper, I opened the find font dialog box and clicked on the button more than information - a feature that I had forgotten in the past, but will rely on a lot from that time.
-
Hi all! This code works great, it returns the average value for contragentid = 1. So correct result is LUAHPER = 14996837,94
But when I add the values for contragentid = 2 (see commented strings), my statement returns incorrect result LUAHPER = 5497801,81
How can I improve my code in order to calculate the average for each contragentid?
Edited by: 858774 14/06/2011 02:29with t as ( select to_date('12.03.2011','dd.mm.yyyy') as arcdate, 1 as contragentid,14275303.54 as luah, 214275303.54 as lusd from dual union all select to_date('14.03.2011','dd.mm.yyyy') as arcdate, 1 as contragentid,14275303.54 as luah, 214275303.54 as lusd from dual union all select to_date('15.03.2011','dd.mm.yyyy') as arcdate, 1 as contragentid,14275303.54 as luah, 214275303.54 as lusd from dual union all select to_date('16.03.2011','dd.mm.yyyy') as arcdate, 1 as contragentid,15274795.50 as luah, 215274795.50 as lusd from dual union all select to_date('17.03.2011','dd.mm.yyyy') as arcdate, 1 as contragentid,15431807.40 as luah, 215431807.40 as lusd from dual union all select to_date('18.03.2011','dd.mm.yyyy') as arcdate, 1 as contragentid,15480730.00 as luah, 215480730 as lusd from dual union all select to_date('21.03.2011','dd.mm.yyyy') as arcdate, 1 as contragentid,15480730.00 as luah, 215480730 as lusd from dual /*union all select to_date('12.03.2011','dd.mm.yyyy') as arcdate, 2 as contragentid,214275303.54 as luah, 214275303.54 as lusd from dual union all select to_date('14.03.2011','dd.mm.yyyy') as arcdate, 2 as contragentid,214275303.54 as luah, 214275303.54 as lusd from dual union all select to_date('15.03.2011','dd.mm.yyyy') as arcdate, 2 as contragentid,214275303.54 as luah, 214275303.54 as lusd from dual union all select to_date('16.03.2011','dd.mm.yyyy') as arcdate, 2 as contragentid,215274795.50 as luah, 215274795.50 as lusd from dual union all select to_date('17.03.2011','dd.mm.yyyy') as arcdate, 2 as contragentid,215431807.40 as luah, 215431807.40 as lusd from dual union all select to_date('18.03.2011','dd.mm.yyyy') as arcdate, 2 as contragentid,215480730 as luah, 215480730 as lusd from dual union all select to_date('21.03.2011','dd.mm.yyyy') as arcdate, 2 as contragentid,215480730 as luah, 215480730 as lusd from dual*/ ) select contragentid, sum(luahper) / cnt as luahper from ( select contragentid, (lead(arcdate,1,date '2011-03-20' + 1) over(order by arcdate) - arcdate) * luah luahper, date '2011-03-20' - date '2011-03-13' + 1 cnt from ( select arcdate, contragentid, luah, lusd from t where arcdate > date '2011-03-13' and arcdate <= date '2011-03-20' union all select greatest(arcdate,date '2011-03-13'), contragentid, luah, lusd from t where arcdate = (select max(arcdate) from t where arcdate <= date '2011-03-13') ) ) where contragentid = 1 group by contragentid, cntHello
858774 wrote:
But when I add the values for contragentid = 2 (see commented strings), my statement returns incorrect result LUAHPER = 5497801,81I guess that's because you don't join and partition on contragentid.
This appears to do:Scott@my10g SQL>/ CONTRAGENTID LUAHPER ------------ ---------- 1 14996837.9 Scott@my10g SQL>l 1 with t as ( 2 select to_date('12.03.2011','dd.mm.yyyy') as arcdate, 1 as contragentid,14275303.54 as luah, 214275303.54 as lusd from dual 3 union all 4 select to_date('14.03.2011','dd.mm.yyyy') as arcdate, 1 as contragentid,14275303.54 as luah, 214275303.54 as lusd from dual 5 union all 6 select to_date('15.03.2011','dd.mm.yyyy') as arcdate, 1 as contragentid,14275303.54 as luah, 214275303.54 as lusd from dual 7 union all 8 select to_date('16.03.2011','dd.mm.yyyy') as arcdate, 1 as contragentid,15274795.50 as luah, 215274795.50 as lusd from dual 9 union all 10 select to_date('17.03.2011','dd.mm.yyyy') as arcdate, 1 as contragentid,15431807.40 as luah, 215431807.40 as lusd from dual 11 union all 12 select to_date('18.03.2011','dd.mm.yyyy') as arcdate, 1 as contragentid,15480730.00 as luah, 215480730 as lusd from dual 13 union all 14 select to_date('21.03.2011','dd.mm.yyyy') as arcdate, 1 as contragentid,15480730.00 as luah, 215480730 as lusd from dual 15 -- 16 union all 17 select to_date('12.03.2011','dd.mm.yyyy') as arcdate, 2 as contragentid,214275303.54 as luah, 214275303.54 as lusd from dual 18 union all 19 select to_date('14.03.2011','dd.mm.yyyy') as arcdate, 2 as contragentid,214275303.54 as luah, 214275303.54 as lusd from dual 20 union all 21 select to_date('15.03.2011','dd.mm.yyyy') as arcdate, 2 as contragentid,214275303.54 as luah, 214275303.54 as lusd from dual 22 union all 23 select to_date('16.03.2011','dd.mm.yyyy') as arcdate, 2 as contragentid,215274795.50 as luah, 215274795.50 as lusd from dual 24 union all 25 select to_date('17.03.2011','dd.mm.yyyy') as arcdate, 2 as contragentid,215431807.40 as luah, 215431807.40 as lusd from dual 26 union all 27 select to_date('18.03.2011','dd.mm.yyyy') as arcdate, 2 as contragentid,215480730 as luah, 215480730 as lusd from dual 28 union all 29 select to_date('21.03.2011','dd.mm.yyyy') as arcdate, 2 as contragentid,215480730 as luah, 215480730 as lusd from dual 30 -- 31 ) 32 select contragentid, sum(luahper) / cnt as luahper 33 from ( 34 select contragentid, (lead(arcdate,1,date '2011-03-20' + 1) over(partition by contragentid order by arcdate) - arcdate) * luah luahper, 35 date '2011-03-20' - date '2011-03-13' + 1 cnt 36 from ( 37 select arcdate, contragentid, luah, lusd 38 from 39 t 40 where arcdate > date '2011-03-13' 41 and arcdate <= date '2011-03-20' 42 union all 43 select greatest(arcdate,date '2011-03-13'), 44 contragentid, luah, lusd 45 from 46 t 47 where arcdate = (select max(arcdate) from 48 t t2 49 where arcdate <= date '2011-03-13' 50 and t.contragentid=t2.contragentid) 51 ) ) 52 where contragentid = 1 53* group by contragentid, cnt Scott@my10g SQL>/ CONTRAGENTID LUAHPER ------------ ---------- 1 14996837.9858774 wrote: How can I improve my code in order to calculate the average for each contragentid?
When I remove the 'where contragentid = 1' seems to do with above query:
Scott@my10g SQL>/ CONTRAGENTID LUAHPER ------------ ---------- 2 214996838 1 14996837.9 -
So, I know that SLI makes no difference in the first, but my question is - does it has harmful effects? For example, if I have two GTX580s SLIed on my system, is it I always get all the benefits a CUDA in the first card or the SLI will reduce somewhat the effect? Ideally, I would like to have a system with CUDA support and a 3 monitor configuration. As far as I KNOW, with Nvidia cards, the only way to get three monitors is to have two cards in SLI.
I think that you would break the connection SLI to get first and MPE even work at all.
Evil Edison wrote:
As far as I KNOW, with Nvidia cards, the only way to get three monitors is to have two cards in SLI.
This statement is incorrect. I ran two nVidia cards and no identical cards in my system for a demo of three monitor. They're apparenly should use similar or perhaps even the same driver.
-
I am fairly new to DW and MySQL. I'm developing what I thought was a simple app search and results, but am apparently having a problem of program logic
I have a form with 2 radio buttons, the code below:
< name of the form = "card_search" id = "card_search" method = "post" action = "card_search_results.asp" >
< p >
< label >
< input < % if (CStr ((rsCardCatBaseball.Fields.Item("catID").) (Value)) = CStr("1")) then Response.Write ("CHECKED"): Response.Write("") % > type = "radio" name = "RadioGroupCardCat" value = "1" / >
Baseball < / label >
< br / >
< label >
< input < % if (CStr ((rsCardCatBaseball.Fields.Item("catID").) (Value)) = CStr("2")) then Response.Write ("CHECKED"): Response.Write("") % > type = "radio" name = "RadioGroupCardCat" value = "2" / >
Football < / label >
< br / >
< input name = "submit_card_cat" type = "submit" id = "submit_card_cat" value = "Submit" / >
< /p >
< / make >
When testing using the URL GET param. I see that the RadioGroupCardCat var = 1 (baseball) or RadioGroupCardCat = 2 (football) go directly to the page card_search_results.asp. However, I can't understand how to capture the values of RadioGroupCardCat (1 or 2) in my SQL queries. I currently have 2 recordset of applications (rsCardCatBaseball and rsCardCatFootball) below.
rsCardCatBaseball:
SELECT tblcard.cardyear, tblcardvend.vendname, tblcard.cardnum
OF tblcard, tblcardcat, tblcardvend
WHERE RadioGroupCardCat = 1 AND tblcardvend.vendid = tblcard.vendid AND tblcardcat.catid = tblcard.catid
rsCardCatFootball:
SELECT tblcard.cardyear, tblcardvend.vendname, tblcard.cardnum
OF tblcard, tblcardcat, tblcardvend
WHERE RadioGroupCardCat = 2 AND tblcardvend.vendid = tblcard.vendid AND tblcardcat.catid = tblcard.catid
"catid" corresponds to the field in MySQL table with a value of 1 (baseball) or 2 (football). I am using ASP/VBScript, so here's how the variable is declared in the variable box DW Recordset.
FOR rsCardCatBaseball:
NAME
RadioGroupCardCat
DEFAULT VALUE
1
RUNNING VALUE
Request ("CATID")
For rsCardCatFootball:
NAME
RadioGroupCardCat
DEFAULT VALUE
2
RUNNING VALUE
Request ("CATID")
The problem is that I get the same results for both queries. The rsCardCatFootball query results are identicle to the rsCardCatBaseball query. Don't I just assumed to have 2 recordsets separate in the results page so that it went from a value and other RS Gets the value else? Any help is appreciated. Thank you.Thanks for the reply. I finally found the answer to my question at:
The declaration of variable in my SQL and DW statement were incorrect. I highly recommend the tutorial above for everyone new to DW and MySQL. The link above specifically explains how to create a variable to be used in a DW/MySQl app. thank you!
-
Hello
m using 12R/win xp...
review of sql en preparation m and I wanted to ask a question...
I used Toad to exercise under the scott schema...
but now I have km I cannot perform any function of DML on it or may b i dnt know abt that...
even with sql cmd... When I connect to the database I can't insert new lines in the scott schema emp table...
m using apps/apps like user login...
thr may comes to sm of rights...
Please guide me on this topic!
thnx in advance!
Kind regards!Hi Shaaquile,
Your statement is incorrect, look at this,.
INSERT INTO( ) VALUES ( ); Kind regards
Christian Balz
Maybe you are looking for
-
Error SSL - HP Envy Windows 8.1
I have a craving for M6 has recently updated to Windows 8.1. I noticed an error in the system log. The service finished unexpectedly HP attached to the remote Service. He did this 12454 times. The following corrective action will be performed in 5000
-
Get the status of power system with labview 8.6
can I get the status of the system power from my laptop with labview 8.6? I have a system that can send the alarm when the percentage of battery power and tha system loss is 30% lower.
-
Error d:/setup.exe is not a valid win32 application
I try to install Age of empires III of my game DVD. his Dungeon, which gives the error of setup.exe is not valid win32 application whenever I click on the Setup file... and my OS is windows 7 64 bit and the game I tried to install I guess that its x
-
power on and off record has changed in my sp3 xp8.
I have sp3 xp8, professional, I used to be able to turn on the PC and it would go directly to the desktop, but now he have a box with the account name and password required, I don't either, so I click ok and it continues. I like the other connect you
-
A simple question: I downloaded driver that was recommended stuff, can I install it before the 8.1 update or after?