My story will not disappear with the tool "clear recent history".

I click on "Clear recent history", check all boxes, select "All" in the drop down menu, then click on "Clear now" and my Firefox will delete my cookies, but it will not delete my browsing history. My browsing history remains. I click the top drop-down history menu and there are still things that I went through a few moments ago.

Try http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

Tags: Firefox

Similar Questions

  • Why is unknown in the device manager that will not disappear with the update disc

    Its been two weeks preparing the motherboard as possible for the repair of the BONE, but there is now an unknown in device Mangr which did not exist before that I was doing all the Driver Update with the drive to the motherboard. Will be also someone please tell me why a CD with drivers for ASUS and motherboard support options change to a file only as reading support only, but it was like an installation disk? I mean he had the factor graph and as multi-format, now it gives just files and are not a pleasure drive anymore? Can I change it back? What happened to him? I did try and she put the BIOS on diskette for a flash for a one-way effort, but it has not worked for me! I messed up the CD? I don't see how?

    Hello

    • This "graphic factor" are you referring?
     
    You can check this link:
     
    How to troubleshoot unknown devices listed in Device Manager in Windows XP
     
  • 2602AP will not register with the 5508 controller

    Hello all-

    We have a 5508 controller that manages the HA to about 20 branches - each branch has its own subnet. We have a single branch (subnet) with new 2602 AP who will not register with the controller. All communications to that subnet appear normal and there is no ACL in place between the AP and the controller. The AP is able to resolve the IP address of the controller via DNS and start the registration process, but then timeout. We have installed 2602 AP successfully to other areas of the branch and they fit without any problems - it is a problem only in one branch. I have attached a few debug messages below for a single point of access (it's a production environment, so I analyzed useless info) and also included messages from the console to a different access point (the console AP messages are the same). There are currently 9 AP here and none of them will record this. Any ideas?

    Capwap debug events:

    * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9 has: Discovery d1:10 request 10.29.9.190:44306

    * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9 has: d1:10 join priority Processing status = 0, priority 1 of incoming Ap, MaxLrads = 300, joined Aps = 272

    * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

    * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

    * spamApTask0: 11 Dec 14:39:32.992: 44:2 b: 03:9 has: d1:10 DISCOVERY LWAPP APPLICATION received at 68:ef:bd:8e:48:6f on port "13"

    * spamApTask0: 14:39:32.992 Dec 11: Discovery 44:2 b request: 03:9 has: d1:10 elements in LWAPP of AP supporting CAPWAP

    * spamApTask0: 14:39:42.903 Dec 11: connection of DTLS 44:2 b: 03:9 has: d1:10 not found, creating new connection for 10:29:9:190 (44306) 10:5:13:4 (5246)

    * spamApTask0: 14:57:52.301 Dec 11: DTLS closed connection events receivedserver e8:ba:70:dc:d1:c0 (10:5:13:4 / 5246) client (10:29:9:190 / 44306)

    * spamApTask0: 11 Dec 14:57:52.301: e8:ba:70:dc:d1:c0 no entry there for AP (10:29:9:190 / 44306)

    * spamApTask0: 11 Dec 14:57:52.301: e8:ba:70:dc:d1:c0 entry no. AP exist in the temporary database for 10.29.9.190:44306

    * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9 has: Discovery d1:10 request 10.29.9.190:44306

    * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9 has: d1:10 join priority Processing status = 0, priority 1 of incoming Ap, MaxLrads = 300, joined Aps = 272

    * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

    * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

    * spamApTask0: 11 Dec 14:57:53.916: 44:2 b: 03:9 has: d1:10 DISCOVERY LWAPP APPLICATION received at 68:ef:bd:8e:48:6f on port "13"

    * spamApTask0: 14:57:53.916 Dec 11: Discovery 44:2 b request: 03:9 has: d1:10 elements in LWAPP of AP supporting CAPWAP

    * spamApTask0: 14:58:03.824 Dec 11: connection of DTLS 44:2 b: 03:9 has: d1:10 not found, creating new connection for 10:29:9:190 (44306) 10:5:13:4 (5246)

    Debug Capwap errors:

    * spamApTask0: 11 Dec 15:17:33.715: e8:ba:70:dc:d1:c0 abolition PT 10.29.9.190 which has not been surveyed

    * spamApTask0: 11 Dec 15:17:33.716: e8:ba:70:dc:d1:c0 DTLS connection has been closed

    Debug Capwap Details:

    * spamApTask0: 11 Dec 15:24:29.419: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

    * spamApTask0: 11 Dec 15:24:35.542: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

    * spamApTask0: 11 Dec 15:24:41.555: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

    * spamApTask0: 11 Dec 15:24:49.555: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

    * spamApTask0: 11 Dec 15:25:29.420: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

    * spamApTask0: 15:25:29.420 Dec 11: connection of DTLS 44:2 b: 03:9's: d1:10 0x1a1703c8 closed by controller

    * spamApTask0: 15:25:29.421 Dec 11: msg closed connection CAPWAP DTLS

    Journal of the Console from the AP:

    Translate "CISCO-CAPWAP - CONTROLLER.ad.pps.k12.va.us"... the domain server (10.29.8.3)

    * 00:00:57.511 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings. [OK]

    * 00:01:10.511 Mar 1: % 3-CAPWAP-ERRORLOG: go join a capwap controller

    * 16:05:56.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

    * 16:06:17.495 11 dec: % CDP_PD-2-POWER_LOW: all disabled radios - NEGOTIATED WS-C3560E-24PD (68bc.0c03.8015)

    * 11 Dec 16:06:28.231: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/DTLS/base_capwap_dtls_connection_db.c:2051 retransmission count Max reached!

    Kern of logging mechanism

    ^

    Invalid entry % detected at ' ^' marker.

    emergency logging trap

    ^

    Invalid entry % detected at ' ^' marker.

    Kern of logging mechanism

    ^

    Invalid entry % detected at ' ^' marker.

    emergency logging trap

    ^

    Invalid entry % detected at ' ^' marker.

    * 16:06:55.999 11 dec: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.5.13.4:5246

    * 16:06:55.999 3 dec: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

    * 16:07:06.367 11 dec: % 3-CAPWAP-ERRORLOG: go join a capwap controller

    * 16:07:07.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

    * 11 Dec 16:07:39.151: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/DTLS/base_capwap_dtls_connection_db.c:2051 retransmission count Max reached!

    Kern of logging mechanism

    ^

    Invalid entry % detected at ' ^' marker.

    emergency logging trap

    ^

    Invalid entry % detected at ' ^' marker.

    Kern of logging mechanism

    ^

    Invalid entry % detected at ' ^' marker.

    emergency logging trap

    ^

    Invalid entry % detected at ' ^' marker.

    * 16:08:06.999 11 dec: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.5.13.4:5246

    * 16:08:06.999 11 dec: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

    * 16:08:17.367 11 dec: % 3-CAPWAP-ERRORLOG: go join a capwap controller

    * 16:08:17.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

    *Dec 17 15:53:47.463: %CAPWAP-3-ERRORLOG: Selected MWAR 'IRC-WLC-5508'(index 0).

    *Dec 17 15:53:47.463: %CAPWAP-3-ERRORLOG: Go join a capwap controller

    *Dec 17 15:53:47.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

    *Dec 17 15:54:23.131: DTLS_CLIENT_ERROR: ../capwap/base_capwap/dtls/base_capwap_dtls_connection_db.c:2051 Max retransmission count reached!

    Get much better.

    WAP has selected the 5508 with good firmware.  WAP sends a JOIN request to 10.5.13.4 but cannot recover anything.

    Firewall?  Routing loop?

    What so-called "remote site", how is it connected to your office?  Dark fiber?  INTERNET SERVICE PROVIDER?

    You know what?  Can you post the output in the following commands:

    1 WAP: sh of stocks;

    2 WLC: sh sysinfo

    Nuts, I should already posed for these info before.

  • Microsoft LifeChat LX-3000 will not work with the yahoo chat

    Microsoft LifeChat LX-3000 will not work with the chat of yahoo, but works very well for the team talk and evacuate the systems of conversation, but for some reason he saus that's compatible with windows Word 7 and he rejects as a microphone?

    Microsoft LifeChat LX-3000 will not work with the chat of yahoo, but works very well for the team talk and evacuate the systems of conversation, but for some reason he saus that's compatible with windows Word 7 and he rejects as a microphone?

    The LX-3000 is compatible Windows 7... get the driver from the website of Microsoft Hardware...
     
     
    When you have installed the drivers, open Yahoo Messenger, go to help > configure video and voice...

    Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

  • Brush control with CTRL + ALT + click right + mouse/pen movement does not work with the tool liquify (photoshop cc 2015): what should I do?

    Brush control with CTRL + ALT + click right + mouse/pen movement does not work with the tool of liquefy; I can't change the size of the brush or hardness. OS win 7 Professional 64 bit, wacom tablet intuos 6.3.14 - 1 driver s pro, Photoshop 2015 CC worm.  2015.0.1 20150722.r.168

    What are your settings of GPU acceleration?  As I understand it, the Alt right click size and hardness adjust needs acceleration GPU to be turned on, but I have a feeling Brush hardness is always set to easy when using fluidity.  You can still see the quick mask as representation of the soft brush when Alt right click, but you can't change the hardness.

    Is that you can change the brush size and pressure (framed in red in my screenshot) Alt right click drag left and right changes size and down to pressure changes, and you can see what is happening in real-time by looking at the sign on the right.  It works independently of your acceleration GPU (IME) settings, but you don't get the effect of soft red quick mask.

    Does this fit with what you see, or you are not able to change things at all?  If not, then I've always found that fluidity consumes system resources, if you could check the Task Manager > Performance tab to see what kind of RAM and CPU use is using the fluidity.  That's what I see after direction the lens above with a big brush continuously for 10 seconds.  Note This is on a fairly quick NLE System.

  • 13 elements will not work with the new camera, it will not be updated raw 8.7.1

    13 elements will not work with the new camera, it will not be updated raw 8.7.1. I downloaded the patch, installed, but the old version is it in elements. Thank you, esther

    Try again a little later. Sometimes the Adobe servers are busy. If you get the same answer, you may need to uninstall and reinstall. Try an alternative link, then confirm with your 24-digit serial number - click here to download PES

  • A document of ORA-600 error [900] is not saved with the tool.

    Hello
    on 11 GR 2 on Win 2008 we have this alertlog:
    ORA-00600: internal error code, arguments: [900]
    On utility metalink for ORA - 600, it is said:
    An Error document for ORA-600 [900] is not registered with the tool.
    Have you information?

    Thank you

    File a SR.

  • The option "Clear recent history" is not available in my version of FF (7.0.1). How can I restore that?

    Described Firefox Help section how to clear history, cache, etc using the option "Clear recent history", but my Firefox version (7.0.1) was not otherwise available.

    Is it possible to restore this option to my version?

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • I can't delete my history. The tab "clear recent history" in tools is inactive.

    I can't delete my history. The tab "clear recent history" in tools is inactive.

    I'm not in 'private browsing', but 'PON crearion of navigation' and 'clear recent history' is still gray. I'm deleting the history. Are there ways to do?

  • New version will not work with the yahoo toolbar. How can I solve this problem?

    I downloaded the new version of Firefox, and it will not work with my yahoo toolbar more. It worked fine until I updated to the new version. I went back to the old version 16.0 and now he repeats to me my version is obsolete. How can I solve this problem and get the new version to work with my yahoo toolbar?

    To start, make sure you have the latest Yahoo toolbar.
    http://help.Yahoo.com/kb/index?page=content & y = PROD_TOOL & local = en_CA & ID = SLN5044 & print = false

  • computer will not start with the disc

    I use vista and my computer does not start because of a corrupted file.

    I put my vista disk in such suggested, but the screen does not move any command of keys to press and just goes round in a loop. So I can't the computer to start and fix.

    I changed the bios to boot from the cd as first choice but still no results.

    can anyone help?

    Could it be that the disk driver does not work like the disk isn't loading? Or the disc will not load because the press any key order is not coming?

    I am old enough and not very technically experienced but this computer has served me well and I have a lot of information that I need to go down there if I have to buy another.

    Any help would be greatly appreciated.

    If you have correctly setting the boot order in the BIOS to CD/DVD first, and the computer does not start, your problem has nothing to do with the driver for the CD/DVD drive. Also running in safe mode or SFC can maybe help you.

    The reason that pilots, safe mode and FCS can help you is the same for all three: boot (if from the hard drive or a CD or DVD) takes place before loading Windows. If it boots from a CD or a bootable DVD, the problem has nothing to do with Windows. It's a hardware problem. I don't know what the problem is, but it is possible that the CD/DVD drive is dead.

    What is wrong can but fixable, but whether it is cost-effective to do so is another matter. It depends on what the problem is. If the CD/DVD player, they are inexpensive, so replacement should not be expensive. Fortunately, it's not like there is a problem with the hard drive, so even if you buy a new computer, you must be able to remove the hard drive from the old computer, put it in an external enclosure and to transfer the data to the new computer.

    Let me add another point: you say "I have a lot of information that I need to get off it if I have to buy another." This suggests that you don't regularly back up your data on an external support. If this is the case, you've played with fire. It is always possible that a hard disk crash, the user error, close to love at first sight, virus attack, even stolen computer, can result in the loss of everything on your drive. As it has often been said, it is not a question of whether you will have a problem, but when.

  • InDesign objects are not locked and will not move with the mouse click.

    I rebooted, uninstalled and reinstalled. Objects interact with when the mouse is clicked. The contours of the block came and the object can be selected and changed, however it will not move with a mouse. Objects respond to the arrows when the issue is raised; but it's heavy at best.

    I gave in my computer image. What was the origin of the problem, is now gone. Thanks for your help.

  • Nested tables will not align with the primary table


    Hi all. Looks like I am facing another obstacle focus on the table. While I was creating one of my pages, I used nested tables to create a column on the left side of the page that will contain my menu secondary, while the other column will hold a flash element and the content of the page.

    Although I have inserted tables nested with a spacing of the cell '0' and '0' cell padding and Visual AIDS seem to indicate that the values in the nested table are identical with the primary table who is the holder, the nested table that will contain the film and the page content is not embedded with the table above. It seems to be off by 1-2 pixels or more, but since there will be a right on the image under the menu is quite obvious.

    I enclose the code for your information (line 165, 166).

    Thank you for your time and your suggestions. I really appreciate it.

    Saturday, September 16, 2006 15:06:50 + 0000 (UTC), "HTML-Newbie.
    wrote:

    > Discover the link http://www.fastventures.com/dev/test_temp_2col.html and you
    > see the picture under the main menu align with her on the
    > right side.

    Change this:




    To do this:

    <>
    SRC = "img/place_second.jpg" width = "572" height = "200" > "

    align = "right" >

    <>
    SRC = "img/place_second.jpg" width = "572" height = "200" > "

    Gary

  • Object drawn with a pencil will not fill with the paint bucket tool

    I draw an object using the pencil tool in Flash CS5. Since I use several traces I connect them all by clicking on Edit, combine objects then Union combining the traits in a single object. But when I try to fill it with the color that it doesn't work. Even if I make sure there is no gap. A few small areas that are closed in the fill of the object with the color, but do not know why the rest of the object refuses to be filled with color.

    Open 2.jpg

    I fiddled around and switch between the object drawing Mode and drawing Mode, but that doesn't work anymore. Usually when I use the Brush tool I have no problem filling the object with colors. But for some reason, I can't when I use the pencil tool! Help, please!

    OK, think about it. If you select your character and in the properties to ask him to be 3000 wide, then zoom in to just behind his ears, you'll see a gap. There is another gap directly in front of the ears.

    The thing filling gaps that Chris mentioned does not immediately work, because your lines are still in odd drawing object, the union did you yet left the tiny holes. You can exit this mode by a Break Apart and select all. Areas with gaps fill again right away, but the small fill openings feature will work. The option size of gap is in the tools downwards when the paint bucket is selected.

    I'm going to insert an image, which shows the great super version, where you can see two gaps, and you can see how the right box is filled, even if there is a gap.

  • Will not print with the exception of the test pages

    I can't print any document (PDF or Word format) but all the test pages will be printed. The document will show less than a second in the print window then disappears. It doesn't matter if I try to print wireless or I plug the USB printer on the computer.  Also, no Google Cloud Print will print.

    The printer is a Photosmart C7280 all-in-one and computer is a HP Compaq nx7400. I use an operating system of Windows 7 with Office 2007.

    Welcome to the joalrabr forums,

    I understand your Photosmart C7280 print not since your connected PC or wireless USB however, it will print the pages of the test directly from the printer itself.

    First of all, I would like to run the HP print and Scan Doctor. I hope the tool will fix the problem. If it cannot, it will tell you the problem.

    Please let me know the results!

    Happy Monday

Maybe you are looking for