My stupid Apple Watch will not recognize a valid appleID and a password.

How to lose a Christmas. Give him an Apple Watch.

Hello

My Apple Watch works fine shows the value back to settings factory & start over.

Go to ibooks

On iPhone / iPad download the Apple Watch user's guide is free.

If you have tried to do this all day just relax & tomorrow sorting.

I didn't know if became a watch until this morning.

Just try it, go into itunes on iPhone / iPad to apple ID

Sign out and then sign back in.

See you soon

Brian

PS I would like to know how you go.

Tags: Apple Watch

Similar Questions

  • My Apple Watch will not charge on the charger.  I cleaned the back of the watch and the charger.  Any ideas?

    My Apple Watch will not charge on the charger.  I tried to clean the back of the watch and the charger more used several points of sale, but in vain.  Any ideas?

    Hello

    When you reload your watch, check that:

    • All the plastic film was removed from both ends and both sides of the cable support (consult closely on the head of the charger).

    • On the back of your watch and the head of the charge cable are clean and dry (clean with an abrasive, lint cloth).
    • The head of the load is properly aligned with the back of the watch, with the concave side / curve touch fully:
      • Some docks of watch, brackets, cases or protectors might hinder it.
    • You use a real Apple magnetic Charging Cable or a certified Apple module magnetic charge.
    • If you reload your watch by plugging into a power outlet:
      • Check that the magnetic charge cable Apple USB connector is fully engaged in the USB power adapter.
      • Try to use different maps of the following:
        • The real Apple USB Power Adapter that came with the watch, or;
        • A true 5W Apple (iPhone) or 12W (iPad) USB power adapter, or;
        • A third-party certified 5W (MFi) Apple USB power adapter.
      • Try to charge via a USB port (see following).
    • If loading via a USB port on a computer, make sure that you use a USB 2.0 or 3.0 port, the computer remains turned on and awake, and the cable is plugged directly into the computer (not on, for example, an external keyboard).
    • If your battery is very low, you may need to wait a few minutes for the green lightning appear (confirming that the charge has started).

    Once the load has started, you can tap on the screen at any time to check the progress (leave a few minutes at the beginning, where the watch is in charge of a very low battery level). A green lightning bolt symbol indicates that your watch is being loaded. It is normal the screen back to sleep while continuous load.

    More information:

    Check your battery and load your Apple Watch - Apple Support

  • Apple Watch will not unlock MacBook

    I have a Macbook 2016 on MacOS, iPhone 6 more current iOS10 of execution, first-generation Apple Watch running Watch OS3 and two steps on authentication.  As shown in the screenshot below, I was able to check the possibility of allowing my Apple Watch unlock my Mac.  He looked the watch and then checked.  I did this several times, however, it will not unlock the Mac.  New features to copy and paste between devices, etc seem to work well, but I can't get the unlocking function to work.

    Hello wow321,

    Thanks for asking for help with unlocking you Macbook with your Apple Watch here in Apple Support communities. We commend you for updates latest and your devices. Also, please check the things you already checked. I will do my best help to offer things to get this working as expected.

    I have personally reviewed article for help to unlock your Mac with your Apple Watch which is here: automatically unlock your Mac with your Apple Watch. The first thing we want to do is to check that everything is correctly configured through this step by step article once more.

    A confusing area for some people is the type of security on their Apple ID. The State of necessity who need a Apple ID to use instead of the two-step verification two factor authentication. Please check the type of security on your Apple ID using this help article that deals with two factor authentication: authentication two factor for Apple IDand this second article of help dealing with two-step verification: frequently asked questions about two steps checking of Apple ID.

    If any snippet and you still have questions, I recommend you make a backup of all your data on your iPhone to make sure that everything is safe. You can perform a backup to iCloud or iTunes. Use this article to help with this: backing up your iPhone, iPad, and iPod touch.

    Then, try to turn the iPhone, with the Apple Watch is paired both devices Mac, power off and on. Sometimes, that's all that is needed for connections reset and everything working properly again.

    If you're still having problems, please cancel the twinning of your Apple Watch from your iPhone by following the steps described here: pairing your Apple Watch and iPhone. Reset the network settings on your iPhone under settings > general > reset > reset network settings. This will remove not your personal information (contacts, photos, calendar of events, etc.), but it will remove networks WiFi recorded and passwords, as well as all the APN or previously used VPN settings and Bluetooth devices connected. After the reset of the iPhone, pair your Apple Watch with your iPhone again and check if the Apple Watch can then unlock your Mac.

    Thanks again for asking for help with this here in Apple Support communities. Have a great rest of your day.

  • Apple Watch will not pair manually or automatically

    Watch became disconnected from the phone.  Followed all the instructions to disable the twinning / re-pair.  Automatic pairing fails repeatedly.  Manual matching fails as well - the watch never displays a 6-digit code.  Has anyone seen this before / resolved for it?  Thank you.

    Hello

    For later use, it is not necessary to clear the pairing and re-pair Apple Watch when it is disconnected. If your watch becomes disconnected via Bluetooth and unable to connect to a Wi - Fi network, known at the time, it will display the icon disconnected on the dial of the Watch:

    Bluetooth disconnects occur every time that the pair iPhone is not available (as in the iOS updates or when your iPhone is out of scope). The watch and the iPhone must reconnect automatically a short while after having reconciled being brought back.

    If they do not automatically reconnect instead of disconnecting your watch, rather trying to keep your iPhone and Apple Watch close to each other and follow these steps until they reconnect:

    • Check that Bluetooth and Wi - Fi are activated on your iPhone:
      • It can help to turn Bluetooth on or off and turn it back on your iPhone (settings > Bluetooth).
    • Check that airplane Mode is not enabled on your watch:
      • When you display the time on your watch, drag upward on the dial of the watch > drag left / right to the glance of parameters.
        • If the glance of parameters says already connected and the symbol in the upper right corner is a green phone, your watch is already connected to your iPhone via Bluetooth.
      • If your watch is not connected and the airplane Mode is on, press the button to turn it off.
      • Otherwise, it can help to activate / turn off the airplane Mode again.
    • Restart both devices, both turn off together, and then restart your iPhone first.

    For optimal performance of your watch, keep both Bluetooth and Wi - Fi enabled at all times on your iPhone.

  • Apple Watch will not update to watch OS 3

    Hello

    I wonder if anyone can help me? I updated my phone to iOS 10.0.1 and when I try to update my watch, I just get the message watch OS 2.2.2 your software is up-to-date.

    I have no profile installed on my phone (for example Apple Beta etc.) and I restarted the two devices.

    Does anyone have any suggestions?

    Thank you

    Allan

    Hi Allan

    It can help to disable the twinning and re - pair your watch.

    The app shows on your iPhone takes a backup of your watch when unpairing via the app choose to backup restore when the possibility to put courses in place. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).

    Cancel the twinning of your iPhone - Apple and Apple Watch Support

    Set up your Apple Watch - Apple Support

  • New version of map on Apple Watch does not recognize my house, even if it is implemented in the Contacts on my phone.

    EDIT - I went CONTACTS and added my work address on my map. For some reason any who has activated the two buttons. Well maybe this will help someone else.

    Updated my Apple Watch OS 2.2.  On the MAPS, there is a home button and a button to work. When I click it, it says "to get instructions, set up your card in Contacts settings on your iPhone."   On my phone, when you look at my map, there my home correctly when I ask Siri to show me my home, it properly displays the address.

    If your problem is solved?
    Thanks for sharing your experience!

  • Apple Watch will not pair to iPhone

    When I try to implement my Apple Watch, my iPhone 6 tells me it's expired. I have the latest version on my phone that is iOS 9.3.5. I choose English and that my area is in the United States, but I can't go any further in the watch. I have reset the watch as the phone. Bluetooth is on. Both devices are charged. I even tried manually matching devices, but all I get is the same error message.

    Is this a new watch or you configure it again?  If used before you remove the existing settings Bluetooth pairing?

  • My Apple Watch will not show its display and its new brand

    MY wife has paired his brand new iwatch all at the time and now the screen is empty, even if the watch is in talks with him

    Hello

    Voice-over (a function of accessibility that includes screen curtain) has been activated on your wife watch.

    • To turn off VoiceOver:
      • On the iPhone of your wife, in the application of the watch, go to: My Watch (tab) > general > accessibility > VoiceOver > disable VoiceOver and screen curtain.
      • Or use Siri: press and hold the digital Crown until your wife feels a slap on her wrist > and then say: "Disable VoiceOver."
    • If the accessibility shortcut has been enabled and configured for VoiceOver, your wife can also enable and disable functionality more conveniently:
      • On the Watch: quickly press the digital Crown (the round button) three times.
    • To set up accessibility shortcuts:
      • On the iPhone of your wife, in the application of the watch, go to: Watch My > general > accessibility > accessibility shortcut (bottom) > select / deselect VoiceOver.
  • iPhone 6 s most will not recognize my access code and has now disabled the phone.

    Helllo, I just got a new iPhone 6s over yesterday. I set up the fine and added my footprint and the password following the instructions. I've also updated the operating system most recent.  Today while out, he kept asking me to put in my password every time I used the phone. I went to try and see if I could lesson the number of times he was asking me this.  He asked for my password, I put in and clicked off the coast I wanted a password used.  Since then he continues to claim my access code again, but will not accept!  He has now disabled the phone that I can't at all.  Can someone please?  I don't want to delete the photos that I took today.  Thank you.

    Since your password does not work, you will need to restore as new.

    You have forgotten or wrong password

    http://support.Apple.com/en-us/HT1212

  • I bought a Apple Watch opportunity in a big box store and it is still attached to the old owners account. How to reset or remove without knowing who was the former owner?

    I have Perchased a previousmy belonging to Apple Watch at a big box store and it. Is still attached to the old owners account. How can I reset or remove it?

    Activation"lock" must be removed and the process is completed by the original Apple ID ".

    owner before another owner can use the item; have you read the article from where

    You may have started your question here?

    • Activation lock on Apple Watch - Apple Support

    You must return the watch brand new/used in the big-box store where you bought it and

    a the management of refund your purchase price or Exchange the item by a unused.

    The instructions in the link of the page above apply mainly to the buyer before, etc.

    of the product, similar to the distance to give or sell an iPhone or nearly any other Apple product...

    Disable locking Activation before you send your Apple Watch in service, sell it or give it

    Before you send your Apple Watch in service, sell it or give it, you must disable blocking of Activation

    on your Apple Watch. Just cancel the twinning of your Apple Watch from your iPhone:

    1. Keep your iPhone close and Apple Watch.
    2. Open the app shows on your iPhone and tap the tab My Watch.
    3. Press Apple Watch, and then click Disable pairing Apple Watch.
    4. Enter your Apple ID. If you forgot your Apple ID password, you can reset it.
    5. Tap again to confirm.

    If you are unable to access your iPhone or Apple Watch, or if your Apple Watch is not paired with your iPhone and

    You must disable the locking of Activation:

    1. On a computer, go to iCloud.com.
    2. Sign in with your Apple ID and open settings.
    3. Under my devices, click on your Apple Watch.
    4. Click the X next to your device.
    5. Click on delete to confirm.

    In any case, I'm sorry it seems to be little or nothing, I can help you for this purpose.

    Good luck in your discussions with people, where you bought the watch...!

  • I run a Mac Pro with El Capitan and iMovie 11 will not recognize my camcorder Sony FDR-AX35P 4 K

    I run a Mac Pro with El Capitan. iMovie 11 will not recognize my camcorder Sony FDR-AX45P 4 K. He keeps asking connect a camera.

    iMovie 11 (version 9) supported cameras include not all models Sony FDR.  iMovie 10 supports a number of FDR-AXxx models however does not list your a see particular: iMovie support cameras - Apple Support

    There are a number of problems of running iMovie 11 under El Capitan, particularly with still pictures appears.  (It does not supports video 4K).  I recommend try iMovie 10.1.2 which you should be able to get in for free or may already have in your applications folder.  Although your camera model in particular is still not listed, I would expect it would probably work, and failing that you should be able to read files directly from the SD card if you put in an SD card reader.

    Geoff.

  • Satellite A500-141 - the CD/DVD drive will not recognize any disk in the status bar

    I watch the DVD yesterday and he played upward halfway through and almost jerky. Ejected and thought no more of him now, the player will not recognize any disc, be it video or sound. I tried a system restore but still the same thing that it is not read disks. Any help appreciated.

    Thanks in advance.

    Hi quietly,

    If your CD/DVD drive doesn't work, how do you have a system restore?

    Is the CD/DVD drive listed in Device Manager correctly or you see a yellow exclamation mark on it?

    Maybe the lens is dirty and must be cleaned with a Microfiber cloth. Open try CD/DVD and try to clean the lens with a clean Microfiber cloth.
    Check this box!

  • After that the last update 12.3.3.17 itunes will not recognize my devices on windows 10

    After that the last update 12.3.3.17 itunes will not recognize my devices on windows 10

    Have you tried these steps? If iTunes does not your iPad, iPhone or iPod - Apple Support

  • I lost my WiFi signal after having placed a time Capsule in the system. Now the Airport Extreme will not recognize the system. Any ideas?

    Any ideas on why my Airport Extreme will not recognize the system after the integration of the time Capsule in my system? Continues to have a flashing yellow light after trying all suggestions of technicians from the Apple Store and Internet provider.

    Since we don't know all what has been tried, we will have to start from the beginning if you don't mind.

    What exact models are your AirPort Extreme and Time Capsule? What is the brand and model of your modem Internet? I'll assume that Extreme is your "main" router and is directly connected to the modem by Ethernet... correct?

    Do you have the Time Capsule (TC) connected to the extreme, by wire or wireless? What is your goal for the TC? In other words, will not be used to extend the reach of the extreme wireless?

  • my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

    my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

    HI - try the following steps:

    On your iPhone close application of activity and also, if it runs in the background, the health app (you can close open apps, including the app shows):

    -Double-click the Home button, and then drag upward on each of the app previews to close.

    It can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:

    -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

    -To switch on: press and hold the side button until you see the Apple logo.

    If this does not resolve the problem, try next disconnect and rematching of your watch:

    -L'app shows on your iPhone shows backups automatically, including a new when the unpairing via the application.

    -Choose to restore the watch (backup restore) when provided the opportunity during the whole.

    -Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).

    - Pairing your Apple Watch and Support Apple - iPhone

    - Set up your Apple Watch - Apple Support

Maybe you are looking for

  • I can't click on a limk in an email and have it open in the browser after update tp 38.0.5

    I use Thunderbird for my e-mail address. Before the update of Firefox I could click on an email and the link opens in the browser. Now ir is not.

  • Menu bar disappears in Snow Leopard for Mac

    The Menu bar on my iMac disappears when I open Firefox 36.0.1. If I move the Firefox window, then click on top of the screen the menu bar of the Finder returns but it's annoying to have to do this. The Firefox menu bar does not appear.I deleted the r

  • Cannot correct the error of taskkill.exe

    I created a shortcut that runs this command prompt command: Taskkill.exe /F /IM uTorrent.exe and I have script Autohotkey that opens this shortcut in this way: Execution C:\Documents and Settings\peter\Desktop\taskkill.lnk The command is executed on

  • Chronology of Photoshop

    I'm working on a video with more than 50 groups of video. I need to shorten the length of each group in a second.I have to shorten each video group one by one, or is there a way to shorten all groups in one batch? Thanks in advance.

  • Windows 10 Home vs. Windows 7 ultimate

    I buy Dell Alien ware 17 R3 17.3 "laptop of game. There ttwhich of Microsoft I dislike. Is it possible to downgrade the OS to Windows 7 or Dell allows not to do? Thank you