My system crashed and now I just get the blue screen that says to reinstall windows, when I try to use my recovery disks that it won't work.
Is there anywhere to get a new copy of the system recovery disc for my windows vista computer. I have a HP Pavillion and I get not anywhere when trying to start repair, it tries to fix my computer and takes forever... and then I get the blue screen saying I need to reload windows. The recovery discs that I burned when I bought the computer do not work. What are my options?
How to reinstall Vista
Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer
Ask them of the exact key sequence
With HP normally press you F11 at startup to start the process of recovery from the recovery partition
or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
How to replace Microsoft software or hardware, order service packs and replace product manuals
http://support.Microsoft.com/kb/326246
If the problem persists with the recovery process, contact HP
http://welcome.HP.com/country/us/en/contact_us.html
or try HP support froums
Tags: Windows
Similar Questions
-
Get the blue screen error saying windows has shut down to prevent damage to this computer
My sons computer is BLUE with a message saying that windows was arrested for not to damage your computer. And it is stuck on that screen. Do you know why windows shuts down his computer?
* original title - my son computer is blue and a message indicating that windows has stopped to avoid damaging his computer. And he is not able to do anything. Do you know what it is? *
Hello
1. what operating system is installed on his computer?
2 did you the hardware changes to his computer before the question?Perform the steps in the article and see if the problem is resolved or not.Resolve stop (blue screen) error in Windows 7
Also check the event viewer for error logs
What are the information contained in the logs of the event (Event Viewer)?
-
my vista system crashed and now it asks me for my vista drive. He doesn't like my drive to upgrade to vista, says that my XP system drive does not work either. where I kenza a copy of vista disc that works?
To reinstall Vista:
You can not legally do a clean install of Vista with a Vista Upgrade disk/license.
Reinstall XP > then go to Vista.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Here's a startup repair disk, you can do:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner:http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
-
Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes. I tried to reinstall vista without success of the problem being fixed
Hello
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during "blue screen of death," collisions
http://www.NirSoft.NET/utils/blue_screen_view.html
Displays information on all the "crash" of a table - freeBlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.
You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
system installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
smile, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!
Hi ipitedafoo,
You can check if this article helps.
Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP
See also:
Error message "STOP 0x0000007B" when you restart your Windows XP-based computer
-
Im just get a blue screen, where the image should be in the develop module. What is happening with the Raw and Jpeg images. The display of the preview in the toolbar. Any ideas?
Disable GPU acceleration. Under preferences-> Performance, clear the check box
-
I'm using Dreamweaver CC and tries to install Dw CC (2014) at the first trial, but the problem come when it expired, both my installed dreamweaver has expired, and now I just enjoy the Bill every month without the product, please help me.
You have more than one Adobe ID and password - for creative cloud and the other for your trial period?
Nancy O.
-
I went to control its embedded on my micro hit some button that met my speakers or my microphone, now there is a terrible noise of comign out of my speakers and my computer went to a blue screen that says something about a crash dump it please help I just reset my volume control , so they will come back the way they came when I bought it.
Hello
1. what operating system is installed on your computer?
2. you remember to make changes to your computer before the problem?I suggest that you follow these steps and check to see if they help.
Step 1:
Restart your computer and Open the troubleshooter of Audio playback and check if this solves the problem.
Step 2:
You may also Update your audio drivers and see if that solves the problem.
Step 3:
If the computer goes into BSOD again, please follow the steps in this article.
-
After that the installation of upgrades KB2419640, KB976902, KB890803 I'm unable to boot. I get the blue screen. I used chkdsk, memtest etc. No problem. I disabled the upgrades to prevent settling. I'm not comfortabel thereby. Is there a solution?
You are able to boot mode safe? If you can, do and run System Restore:
To access the system recovery environment in Windows 7, simply start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. You will see a new option 'Safe Mode', select this option and press 'Enter' on your keyboard.
System Restore -Windows 7 features - Microsoft Windows
After you're booted in Normal mode, click Start, all programs > Windows Update
Check for updates, now updates you're experience problems with, each of them right click and click "hide update".
If they are updated driver in particular, do not install them, hide them instead, any update of the driver offered, instead of this download directly from the manufacturers Web site.
HowManage , Configure and troubleshoot Windows updates releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP
-
I have Windows Vista Home Premium. I was on the internet when my computer screen turned blue and a message told me that a problem has been detected and Windows has been shut down. He said that I had tried to do something with memory executable not executable (I don't have a note of the code). He said as he poured out memory. Now, whenever I start, the blue screen of death gives me different messages and different error codes. Today, he says:
IRQL_NOT_LESS_OR_EQUAL
and codes of error STOP: 0x0000000A (0x0000001B, 0 x 00000600, 0x810A90B0, 0x00000001).
PC World say that they need to reinstall Windows, but I have some really really important files on there that I have not supported (I know, really stupid on my part) and they said they cannot guarantee their recovery. Is there another way to fix it?
I've been on the forums and suggestions involve me to be able to connect to my computer. Blue screen hits me before I can log on, and there is no prompt to start in safe mode.
Thank you very much!
Try this to save your data:
Data recovery:
1. slave of your hard drive in another computer and read/save your data out there.
2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.
3 Alternatively, use Knoppix Live CD to recover data:
http://www.Knopper.NET/Knoppix/index-en.html
Download/save the file Knoppix Live CD ISO above.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://isorecorder.alexfeinman.com/isorecorder.htm
Download the Vista software from the link above.
After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.
Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.
Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.
Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.
When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.
Click on the icons of hard drive to open and to understand which drive is which.
Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).
Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.
See you soon.
Mick Murphy - Microsoft partner -
I did a factory restore and still get the blue screen message.
Separated from this thread.
I did a factory restore and still get the blue screen message. Windows says it is searching for a solution, but is never a solution. What can I do?
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.768.3
Locale ID: 1033More information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8004A7E1D8
BCP3: 00000000B 6000000
BCP4: 0000000000010015
OS version: 6_1_7601
Service Pack: 1_0
Product: 768_1Files helping to describe the problem:
C:\Windows\Minidump\050515-27159-01.dmp
C:\Users\papreps\AppData\Local\Temp\WER-120136-0.SysData.XMLRead our privacy statement online:
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409If the online privacy statement is not available, please read our offline privacy statement:
C:\Windows\system32\en-US\erofflps.txtHi papreps,
Thanks for posting your query on the Microsoft Community.
As the posts above mention, the problem comes from your drivers. Crashes BSOD (Blue Screen of Death) are usually caused by bad drivers (manufacturer code) and incorrectly blamed on the operating system. Make sure you have the latest chipset drivers installed with the latest version of the BIOS.
I suggest you to download and install the latest drivers from the manufacturer's Web site.
Try the procedure described in the following Microsoft Help article.
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7
, Note 1: Running chkdsk on the drive if bad sectors are found on the hard drive, while the bad sectors can be refunded but there may be loss of data.
Note 2: Data or files that are infected by malware could be beyond cleaning and must be completely deleted to preserve the integrity of your system, which means that there could be a risk of data loss.
Keep us posted on the State of the question, we will be happy to help you.
-
Installed the network updated drivers hp support page now I get the blue screen of death
Installed the network updated drivers for my laptop hp support page and now I get the blue screen of death a few minutes of Internet usage.
I can reboot the computer, but it only works for a little bit before again becoming the blue screen.
I tried to download and reinstall the hp 8 drivers network twice now. (Product number: QJ793AV-#ABA)
I am running windows 7 (x 64) and downloaded all the updates as well.
Any help would be greatly appreciated.
I made an another windows update and seems to be ok for now
-
I get the blue screen with the exception of system Service in Windows 8. It seems that many people have of it. I can't use my computer without losing all the data every few minutes. It is brand new. Fix? It often happens with Firefox, but other times too and restarts sometimes when you type an e-mail in the e-mail of Windows 8 program.
For this recent System_Service_Exception error, if you have an AMD graphics card try the next tool from AMD to try to get the latest graphics driver:
http://support.AMD.com/us/gpudownload/Windows/pages/auto_detect.aspx
According to me, a recent update of Windows, maybe the 2778344 which updates win32k.sys to the 6.2.9200.16503 version, could cause a conflict with the AMD graphics driver.
Many users report the same error recently and so far have all AMD/ATI graphics cards.
If all goes well the graphic driver update will help.
If the problem persists, consider uninstalling 2778344.
Then, at the moment, 'hide' 2778344.
-
ERROR MESSAGE
I get the blue screen for video: ati3duag.dll, BFO72000, time stamp 33fb6e2af. How to find & fix the problem? Speak not disable bios memory.Also I get: 0x000008E (0xc0000005), 0xBF0C8855.
This happens when I want to watch a video.
I use windows XP Home EditionThank you
LaurieI guess you have a problem with
your video driver. You may want to update or
It may have been a version that your
hardware has problems with.Do a restore of the system in Mode safe for a time
before the problem started, may be worth a try.See the following articles:
(306084) how to restore Windows XP to a
previous state
http://support.Microsoft.com/?kbid=306084How to restore a Windows XP system to a previous state using system restore
http://bertk.MVPs.org/(315222) a Description of the Safe Mode
Boot into Windows XP options
http://support.Microsoft.com/?kbid=315222How to start safe mode in Windows XP
http://bertk.MVPs.org/html/SafeMode.htmlGood luck...
-
Why do I get a blue screen that says your PC is encountered a problem and needs to restart. We are only collecting the error information and then it will reboot for you.
https://www.dropbox.com/s/2dtm74f6ki7goa4/minidump.zip
DAG
These were related to your driver atheros wifi athw8x.sys I would like to re - install the latest driver available.
If you continue to plant I remove Symantec and use the built in Defender
Maybe you are looking for
-
Hello world My listing of workstation: HP Z820, Dual Xeon E5-2687W @ 3.1 - 3, 8 GHz, graphic card Nvidia quadro K5000, 64 GB RAM, 2 x 500 GB HARD drive.The workstation is still under warranty. They arrived after upgrade to Windows 10 (from 8.1 to Win
-
Appearance problem - please help!
Could someone help, please! Looks like my baby press the buttons and everything on my laptop in ancient times (last century, I would :)). I don't know how to solve this problem of normal appearance. I tried the screen resolution, color quality (by th
-
When open TASfirstbooks this error message: error running-2146234304 (80131040)
When you try to open TASfirstbooks this error message: error running-2146234304 (80131040) Automation error tracking. How can I overcome this? I recently uninstalled the program and reinstalled it. This does not remove the data files. Help please.
-
How can I watch my videos with the .mov format
Please help, I can't watch my videos because system does not format .mov, I have Quick Time Player and tellme 2048 error thanks
-
SRM 5.5->; customization of Ip
Hello, is there a way to customize a NETWORK card with multiple IPs?for example, under linux, I have eth0 and eth0: 0. I did a test and the default customization clears my eth0 Setup: 0 when I ran a test of recovery.