My system crippled Windows Update

my system crippled Windows Update. Lights on. All the tests of transmitted material. Try to restore but it does allow me to enter a restore point and none come up when I click on the show more restore points box. What should I do?

If you are unable to find a repair disc, you will have no choice but to run a factory restore.

Tags: HP Desktops

Similar Questions

  • restore system and Windows Update

    Windows 7 Home Premium SP1,.

    Windows Update no longer works... It hangs on the VERIFICATION of UPDATES...

    I tried all types of corrections.

    Finally, I tried to make a rerstore of the system to a date where EVERYTHING WORKED very WELL.

    Windows Update still does not work.

    Why a system restore NOT rerstore Service of associated system components Windows Update?

    Because they are broken. Only insufficient. Install the latest version of the client update Windows, included in the cumulative hotfix July 2016. See:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-problems-read-this-first/28147a5f-B0B0-480b-bed9-834a2da7a375?page=11&msgid=52e74cd6-a9b8-45ac-BD1B-bc3ed60488bd

    Automatic updates to 'never check updates' and restart Windows before the manual installation of the value, and then install KB3172605.

    Best regards, VZ

  • "Error loading operating system" after windows update

    I have an ASUS EeePc netbook model: 1005PEB. Last night before going to bed, I stopped the netbook and it has begun to install and configure windows was last updated. I left on the office do its thing and went to bed. This morning, I got the netbook and it went out of the car and it turned on while I was about to leave the House (before ask you, no I ' was not flying). He started installing all the updates that it had installed the night before. It has gotten to the point where it installed the last element and hung up there. I leave a this screen for 45 minutes and nothing has changed. I went against my better judgment and off the netbook. When I went immediately to turn it back on all I get is "error loading operating system". I tried to use F8 to try to start it in safe mode and I can always access the BIOS. How do I get this service still? I don't have really any data here, I'm too preoccupied. Thanks for any help anyone can offer.

    Hi argyle_83,

    Were you able to boot into safe mode?

    This problem can occur if your computer's BIOS does not correctly manage or support the capacity of the hard disk on which you install Windows 7. You can try the steps below to resolve this issue.

    Method 1: Obtain the latest BIOS updates

    WARNING: This article contains steps that may involve changing your BIOS or parameters of semiconductor (CMOS) to complementary metal oxide, or that may require you to make physical changes to your computer hardware. Incorrect changes to the BIOS of your computer may cause serious problems. Microsoft cannot guarantee that problems resulting from changes to your BIOS can be solved.

    Your first step to solve the problem of the error loading operating system should be updated to your computer BIOS.

    Contact the computer manufacturer to find out how to obtain and install the latest available for the computer BIOS update.

    Find information of BIOS on your Netbook from this link.
     

    Here are answers to some common questions on the basis of input/output system (BIOS).

    BIOS: Frequently asked questions

    Method 2: Run the Startup Repair

     

    Startup Repair is a Windows Recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting.

    Refer to this article for more details.

    What are the system recovery options in Windows 7?

    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Cannot use restoration system or Windows updates: 80070017 error?

    I want to do a system restore because my system has encountered serious problems.

    But when you try to restore fails and I get the error message: "data error (cyclic redundancy check). (0 x 80070017) »

    I also won the same "80070017" error code when I try to install the updates using Windows Update utility!

    A little research told me that it may be corrupt or missing files on my, so I run chkdsk.exe and scheduled a restart it control and repair.

    Chkdsk.exe ran on starting and from what I remember there were replaced for some reason files any.  However, it took a long time so I left during the night and woke up to find my loan to connect system. I'm not entirely sure of what were the errors it and whether or not they have corrected!

    So I ran sfc/scannow and these are the results: abbreviated errors - complete (.txt files)

    Needless to say what these two did not help.

    If anyone has any ideas on how to get system restore to work that would be great!

    Thanks, Rich.

    Well, the Diagnostic tests showed a pass on my HDD without any problem when I ran origanally.  So I decided just to do a reinstall of Windows that I wasn't getting any case with the restoration.  But I couldn't do that, that failed too!  Another error code to add to the collection

    In the end I had to use Dban to completely erase the disk as it seemed the only choice, Dban found no errors of disc during this process either.

    After said and done, it looks now my drive has bad sectors on it, during the installation of Windows, he warned me my disk was not and the WD Diagnostic tests also shows a failure with number of sector transferred, value - 132, 140 threshold, worst - 132.

    Guess it's time again to HD.

    Thanks for your help!

  • Calls, by a representative of the system of Windows Update?

    I received a call from a man by the name of James, who claims to be a representative of windows update system. It said my email had been hacked by Ashley King and that people receive a lot of spam to me. He said that I had to go on my computer immediately and allow him to correct this problem. I asked for her phone number... 800-630-0583. He is not my email addresses, but claimed to have my IP address. Is this a problem? I'm sure it was a scam. I don't give him no information and it was very demanding. He told me to go to my computer and turn it on. My computer was already, but I hung up. Please advise me on this. Is my computer safe? Thank you.

    Hello

    I completely agree with your actions. It was definitely a scam designed to trick you into revealing personal information, such as your email address. What he did probably was trolling the internet and came across your computer, "in the wild". Once a computer is, the IP address is automatically called.

    As long as you are protected by a robust inbound and outbound firewall and antivirus / antimalware you are reasonably safe. I use PrivateFirewall from Privacyware as my firewall. It also offers a protection anti-phishing and antikeylogging as well. It is freeware. See here for more information: http://privacyware.com/personal_firewall.html .

    I would like to know if this helps you or if you need more specific information about something...

    Kind regards

    BearPup

  • system - failure - windows update status

    Hello to all of you who made everthing possible for this forum are available for all needing help.

    My question as iam having right now is to update windows

    1. conexant-audio-conexant-high definition audio
    2. installation failed
    3 conexant audio software update released in May 2008 - updated
    4 details about the error; code 800705 b 4
    5. its gave me more information - winqual.microsoft.com/support/?driveid=2016356
    6 help & soutien-support.microsoft.com/select/?target=hub

    I'm not sure since its opitional update audio conexant, do I ignore, or continue, please give me your you.happy suggestion.thank vacation

    joserd,
    If it's a driver update, I suggest that you check with the manufacturer of hardware and download the drivers updated directly from them.  If you are able to update the driver then the version of Windows Update may not be be offered more.
    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Update and System Restore does not work after that the virus

    I recently had a virus on my computer, when I finally had removed my windows update does not work, my system restore will restore to any previous point and my computer seems to generally work more slowly.  Also groovemonitor seems still exists but is not really available to use, it runs in the process but is not available anywhere else.  Any suggestions?

    Hi TedDanson,

    1. do you get an error message when you try to run the restore system or Windows updates?

    I suggest you run a complete antivirus scan using Microsoft Safety Scanner to make sure that there is no virus infection:

    Microsoft safety scanner

    I hope this helps.

  • Error code 646 when trying to install Windows updates.

    Windows updates appear to download but will not be installed.  I tried to go into 'control panel '; Security systems &; then Windows updates.  It checks and concludes that they are downloaded and try to install but won't.   My computer is set to automatically download and install, so I'm never checked to see if they really were the installation so far.  It seems the latest installations of updates took place the 1/11 & 12/01/11.  There has been many failures last year.  Right now, it seems that there are 6 updates important and 6 optional updates that will not be installed.

    I tried to disable my Norton Internet Security and then the installation, but that does not work either.

    Can anyone help?

    Thank you.

    See the following topic for your question

    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1c7b1ab1-FCBA-4897-bd36-c766addb0cbf >

  • Several updates to install after performing a system restore. Updates must be installed?

    After the system recovery, windows updates shows 64 installed updates. Many have the same title with another date. Should I install all updates or just the most recent version of each update? Is there a certain order to install these updates because there is so much?

    Hi erculb,

    Thank you for visiting the Windows Vista community.

    You can install the latest version of each update. But make sure that you install only two updates

    at the same time and each time you are prompted, restart the computer.

    Some updates apply to files or services that Windows uses. These types of updates can't be installed while Windows is running so you should save your work, close all open programs, and then restart your computer to complete the update process.

    Please visit these links for more information about installing updates:

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    http://www.Microsoft.com/Windows/downloads/windowsupdate/learn/windowsvista.mspx

    http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

    Kind regards
    Amal-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Update error 80070246

    Hello

    I have recently upgraded to Windows Vista Home Premium (SP1, 32-bit). Once installation is complete, I did the normal thing to go to windows update to get all the updates. After validation, it started to download somewhere in the order of 1 million updates (which is normal) and installed most of them without problem. However, these few finals refuse to install.

    .NET framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update - KB 951847
    For updates: KB850974, KB952004 KB953733 KB956802, KB957097, KB960803
    Update for Windows Vista: KB959108 KB952709, KB957388.

    Trying to install, I get the:

    Code: 80070246 Windows Update encountered an unknown error.

    Things, I tried that did not work and why/how they do not have to work:

    1: Download updates manually and install them with the Setup program to update windows on the local system (from windows update program) I just get the result "missed" without any explanation.
    2: started 'clean' and tried both (1) and the windows update with the same problem
    3: installation of each of them individually (both in the release order and random order) as well as a couple at a time groups, similar (updates security, updates, vista, etc)... nothing.
    4: I went to the site of support here: http://support.microsoft.com/kb/942968 and followed the instructions verbatim, including the download and installation of Windows AIK... no change.
    5: I tried "sfc/scannow" in an elevated command prompt (I also tried to take 'ownership' of my windows directory). I got the following results:

    Start of the phase of verification of the scanning system.
    Full check of 11%.
    Windows resource protection could not perform the requested operation.

    6. I run Trend Micro Internet Security for which I completely from the program (not to mention the 'clean' boot) and tried without success.

    The only thing I can think to do then (apart from reformatting..) is the option 'fix' on boot from the installation CD but I only am not 100% sure who would fix.

    Someone at - it suggestions? I'm puzzled.

    Thank you

    W1ReD

    Hi W1ReD,

    Thanks for posting answers.microsoft.com

    To successfully install the update, uninstall all versions of the .NET Framework on the computer, and then reinstall all the versions of the .NET Framework on the computer. You may need to work through more than one of the following methods.

    Follow the steps in this KB article

    When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update error code

    I realize that it is not specifically the error received, however, the determination is essentially the same.

    Publish on us and let us know if this does not help or if assistance is needed.

    Kind regards

    Debbie
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error code Windows Update 80070490 and the message "Windows cannot check the updates.

    Windows Update 80070490 error code appeared yesterday (21 September 2013) and the message "Windows cannot check for updates. I'm using Windows Vista 32-bit, Service Pack 2. I tried almost all the suggestions on the Internet (including on Microsoft Web page) on this way to solve this problem, including Microsoft fixed it, the update of the system, file Windows Update DIAGCAB Diagnostics tool and etc, but still getting the message. The last successful update was on 13.09.2013.  All updates done before and September 13 are written as a 'success' in the folder "Update history", but when I open the folder "Installed updates", I don't see anything and it says "no update are installed on this computer", which is strange, because at the moment, Windows Update was made automatically without any problem.   Please help me to solve the problem with this error code.

    Thank you, you shared your experience with me, but I already solved the problem. Niemiro of Sysnative.com forum helped me for this

  • Receipt of answer unanswered - Windows Update, an error code 80070570

    I asked for a response to the above, and J of Nithyananda answered the

    and asked that in order to go further, he (she) needed more information.  I have responded on 03/12/12 and provided the answer.  From today 05/12/12, I have not heard something more on how to get my Windows Vista Basic Home Edition to update my system using Windows Update without error 80070570.  Can anyone help?  Thanks in advance, L. Sal

    0 X 80070570 - ERROR_FILE_CORRUPT
    The file or directory is corrupted and unreadable.

    Suggestions:

    Check your hard drive for errors
    http://Windows.Microsoft.com/en-AU/Windows-Vista/check-your-hard-disk-for-errors

    How to reset the Windows Update settings?
    http://support.Microsoft.com/kb/971058

    Diagnose and automatically fix common problems with Windows Update
    http://support.Microsoft.com/mats/windows_update/

  • error 800b0100 windows update KB2660649 - Windows Vista Ultimate 32 bit SP2 installation - solved

    Original title: 800 b 0100 KB2660649

    • Run Windows Update on Vista Ultimate 32 bit SP2 under BootCamp on Macbook Pro
    • Trying to install KB2660649 by using Windows Update
    • Difficulty is unable to install - response 800b0100
    • Running sfc/scannow - successful, no error
    • Have downloaded and run the update tool system - successful, no errors
    • Downloaded and run the stand-alone version on the fix - failed, and saw the following in the system log: Windows Update 'A security update for Windows (KB2660649)' could not be installed because of an error: 2148204800 "no signature was present in the subject. (Command line: "" C:\Windows\system32\wusa.exe""C:\Users\steve\Downloads\Windows6.0-KB2660649-x86.msu"")
    • Tried WU and seen the following in the system log messages: b Windows Servicing began a process of change in package KB2660649 (security update) State of Resolved (Resolved) to Staged (Staged) (b) Windows Servicing has not completed the process of the configuration package KB2660649 (security update) in State of Resolved (Resolved)

    Any ideas anyone please?

    Amazing!  I have already mentioned that I lived the problem of the "feature Windows empty window.  Seeing that my initially reported problem and seemed to have similar signs and given that I had a clear explanation on how to solve this problem, I did it - and these two problems are now history.

    In the two following links, you will find the description and method to solve the problem of the 'empty Windows feature window' and (b) a method for appropriating errant registry entries.

    http://www.Raymond.CC/blog/fix-blank-or-empty-list-in-Vista-turn-Windows-features-on-or-off-optionalfeaturesexe/

    http://www.Raymond.CC/blog/full-control-permission-to-delete-or-edit-restricted-Windows-registry/

    This * may * solve your problem too - it seems that there is a generic problem with determination rather poor problem feedback.

    Good luck and thanks to all who contributed

    Best regards, Steve

  • No sound in browsers after a windows update

    OK, this is the second time that this has happened. While I was asleep Windows Update and now I have no less sound my browsers. I fixed it the first time by running a system restore, but I don't want to have to restore the system whenever windows updates. I am running Vista on a HP Pavilion (DV6 I think) I know that this has nothing to do with browsers, since it happened twice after a windows update.

    In addition, all is well in the mng device. and I can hear in media player.

    Hi ty f.

    ·         Are you referring to Internet browsers?

    ·         What browsers are installed on your computer?

    For Internet Explorer, you can consult the following suggestions.

    Method 1: Check if the sounds are disabled for the browser.

    a. open Internet Explorer. Go to Tools , then Internet Options.

    b. open the Advanced tab.

    c. scroll down to the multimedia section.

    d. make sure the box next to play sounds in web pages . Click on 'ok '. Restart Internet Explorer. A test to see if the sound will now play.

    Method 2: Reset the Internet Explorer settings. See step 2 of the following article.

    Internet Explorer is slow? 5 things to try - help & how-to - Microsoft Windows

  • Why Windows Update taking so long?

    Well then I have just updated to Windows XP to Windows Vista, I tried to update my system using windows update. And it was 'Check updates' for a few hours now. Why it takes so long? I mean, the last time I checked, there were only 7 updates for me.

    First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista
    NOTE: If a 3rd party firewall was used, including one installed with a security suite, open Windows Firewall in Control Panel and make sure that the native Vista firewall is now on. No 3rd party firewall will be executed in the State of clean boot.

    Then, go here, please download and Save the Fixit - How to reset the Windows Update components

    With all the programs and browsers closed, run MicrosoftFixit50202.msi and choose aggressive mode. Turn it back on when he finished the race.

    See if the system can update now. If it does not, please copy and paste the last 50 or so lines of WindowsUpdate.log in your response-
    How to read the Windowsupdate.log file

    MowGreen Services update - consumer safety

Maybe you are looking for

  • question about my iphone 6

    I just did the update for my iphone 6 and have 2 questions (1) the background on my clock is now black instead of white, black is depressing, not to return white background with black letters? (2) when my screen is locked, to open what I have to swip

  • Why the cards of Apple is so terrible?

    Seriously? It still lists a road as first choice, regardless of traffic conditions.  He rarely offers the alternative path, she seems to have 2-3 pre-defined routes, but none that are in any way creative or who to avoid bottlenecks oobvious.  He ofte

  • TM14 - no subtitles of mkv in media player

    Hello! I can not access the substitles contained in mkv (pronounced to DLNA) files.I have an old box of configuration of toshiba on which substitles works perfectly, I am surprised that this feature is not available in a TV of 2014! Certainly I forgo

  • Energy saving of Toshiba on SP M30

    I have the same problem with Toshiba watch on my SP M30 laptop running WinXP SP2 and SP1.This utility generally LCD Brightness according to the level of the battery.If you connect your laptop to external power the display gets bright IF you are logge

  • MacBook Pro OSX Yosemite 10.10.5 retina kernel panic

    Last month, I had about 6 random system with a kernel panic failure, which happened while I was using internet (Firefox). I've had this computer for over a year now, wand I never had this problem before this month. This is the latest report: Journal