My system is very difficult to start.

I use Windows Vista and receive this message every time I start my computer: C:\Windows\sytem32\config\sytemprofile\Desktop is not accessible, access is denied. I have to keep in the severla system reboots before I get it's normal. I tried the system restore, but it couldn't work. Please, I need a solution to this problem.

Try to do a Startup Repair:

If the system restore does not work and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

Download the ISO on the link provided and make a record of repair time it starts.

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

When you have changed that, insert the Bootable disk you did in the drive and reboot.

Link above shows what the process looks like and a manual, it load the repair options.

NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

Read all the info on the website on how to create and use:

ISO Burner:

It's a very good Vista startup repair disk.

You can do a system restart tool, system, etc it restore.

It is NOT a disc of resettlement.

And the 32-bit is what normally comes on a computer, unless 64-bit.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • I finally got CS2 installed on my system. But now the menu background color is black and the elements are not visible until the cursor is over them. It is very difficult to read. How can I change this?

    I finally got CS2 installed on my system. But now the drop-menu background color is black and the elements are not visible until the cursor is over them. It is very difficult to read. How can I change this? I tried to go into change preferences but it does not work

    I changed it to the value default them and that worked. Thank you very much

  • Failed to create the restore point and system runs very slow

    Original title: date of restoration

    An automatic download occurred.  System is very slow.  Runs in safe mode.  No date of restoration can not enter in safe mode, time in normal mode.  Cannot run the system restore.

    Hi Jim,

    1. you did it any recent hardware or changes to software on your computer before this problem?
    2. the automatic download is produced through Windows update or any application?

    3. What do you mean by "is running in safe mode. No date of restoration can not enter in safe mode, time in normal mode. Cannot run the system restore'?

    4. what happens when you try to start in Normal mode?

    5. what happens when you try to perform the system restore?

    6. do you get an error message or error code?

    Please follow the links:
    How to troubleshoot performance issues in Windows Vista

    How to resolve performance issues during startup in Windows Vista

  • I have a Presario SR5450F. Recently, it is very slow to start. It hangs on the Compaq screen

    I have a Presario SR5450F.  Recently, it is very slow to start.  It hangs on the screen Compaq (Installer, boot, System Recovery, Diagnostics Menu).  He hangs up on this screen for at least 10 minutes, which is unacceptable.  He just started this.  Can someone help me please?  Thank you.

    Thank you.  Problem solved.  I unplugged my USB devices and the freezing of the Compaq screen went away.  Now, it starts fine.  I've isolated the USB device that was causing the problem... it's the connection of my digital camera.

    Thanks again.

  • T42 very slow to start up and open programs

    I have a T42 that is very slow to start and go to programs.  Operating system is Windows XP.  Any suggestions would be greatly appreciated!  Thank you!

  • DV7-6c95dx: the battery latch moves very difficult - no spring action

    Got a dv7-6c95dx - battery will not accommodate in very well - lock is not any spring back to maintain the battery in and latch moves very difficult. Saw an article on the repair and replacement, but can not find it now - HowTo find a spring?

    Hi @LR7575,

    Thank you for your query. I understand that the battery is not sitting down, the lock is not any action of the spring latch is difficult to move.  You saw an article on the repair and replacement, but are unable to locate it now. You are not sure how to get a replacement spring.

    Here is a link to HP Pavilion dv7 Notebook PC Maintenance and Service of Guide. After reviewing the guide, the battery latch is part of package. Please see Chapter 3, page 37. Chapter 4 is removal and replacement procedures. Chapter 4, page 47 a procedure to remove and replace the battery.  For your convenience, I included a link to the HP parts store.

    Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem. "Think about scoring the post that solves your problem as" ","accept as Solution " to help other members of the community! To say thanks for the help, please click "Thumbs Up icon" below.

  • HP 2540: 2540 very difficult Question.

    HP 2540 very difficult question!  Where to place a document on the glass before scanning/printing? (Upper-corner L, R, L corner, lower corner R, center top corner).


    You find all brands (for paper formats) along the coast and a symbol that shows you where is the corner?

    Kind regards.

  • Operating system is very low on disk space. NtKernel.etl takes more than 1 200 KB of space files.

    Original title: NtKernel.etl

    My Windows Vista operating system is very low on disk space. NtKernel.etl takes more than 1 200 KB of space files. Can I delete this file to create more space?


    ETL files are files of track, but that won't get back you a little more than a MB.  If you're hungry for space, it might be time for a larger drive.

  • Scroll of blackBerry Smartphones are becoming very difficult to "BOLD" (with a pad, not a scroll wheel)


    Scrolling became very difficult in my "BOLD", but it has a pad, not a scroll wheel, so I can't follow the spoken wheel and push solution previously in these forums.

    The symptoms are that it is difficult to get the cursor to move to the left or to the right or upwards or downwards, sometimes that it moves more easily than other times, but never as easy as it was until last week. What often happens is that I end up pressingteh pad too hard trying getting the top of the page to save the movement and thus itreads as a click instead.

    I tried to clean the buffer, cleaning of my thumb or finger, battery-out-restarted "BOLD" of countless times, tried with my fingers wet and dry...

    It seems that she has changed after an update has been downloaded, but maybe it's just my perception.

    In any case, what could be the problem and what is the solution please?

    Hello qw8,

    Welcome to the forums.

    Take a look at the knowledge base article below which may help you with your trackpad problem.


    Trackball, keyboard or trackpad not working only not on a BlackBerry Smartphone.

    I hope this helps. Nice day.

  • My accuracy of the mouse is off and it is very difficult to choose precisely the things.

    original title: precision of the mouse

    I can't get my mouse to be pretty accurate.  When I have this point, I have to go back a few times before I can get it to the right place.  For example, I play the game MSN Shapeshifter and this mouse makes it very difficult to point and each form quickly and precisely.  I clicked on the box of precision in the pointer options mouse and changed speed.  Maybe I'm just a defective mouse?

    I would appreciate any feedback there, can someone give me.

    Thank you


    Two things.

    1. do you have wireless mice come with the computer and it comes from the same manufacturer as the PC?

    If so, the driver can be updated depending on how long the PC was sitting in the store/warehouse.

    At the Support Web site of the manufacturer and the search for your PC model. There should be a Driver download section.

    2. try to set the mouse settings in the control panel.

    Open Control Panel

    Select the material and audio

    Under devices and printers mouse select

    On the pointer Options tab, you can adjust the pointer speed

  • The top of the invisible selected page size page in illustrator, what setting? This makes it very difficult to work. Is this a glitch/bug?

    Screen Shot 2015-06-30 at 11.27.07 AM.pngThe top of the invisible selected page size page in illustrator, what setting? This makes it very difficult to work. Is this a glitch/bug?

    It's a glitch/bug. Disable the GPU performance in preferences.

  • Mode Code of Dreamweaver is very difficult to read, as it has degraded. It was easy to read. Clues as to why this has past and how to fix it? Thank you very much!

    Mode Code of Dreamweaver is very difficult to read, as it has degraded. It was easy to read. Clues as to why this has past and how to fix it? Thank you very much!

    Did you receive a Windows security update recently?

    See this thread:

    Pixelated text

    The last Windows Update published February 11 has caused my Courier New fonts to corrupt.

    Nancy O.

  • It's a very difficult job to partitioning?

    Hello world
    The application is special. I want some very large partition tables. But I can't design a perfect solution. l is a very difficult partitioning work!
    More than 3 MB of data is inserted in the MESSAGE table per second several times. The data inserted into the table of MESSAGES per hour are more than 10 GB. Some of the data in the MESSAGES table are transformed and inserted into other tables. An hour later after insertion, the data are rarely be accessed and not any what DML more on this subject.
    I want to partition the MESSAGE table. Because only data within the hour that should be kept, I think it's better to save and delete old partitions or just keep them unalterable.
    Now the problem is if I partition on the DATE column table (time), all operations focuses on a single partition - current partition and segments of current partition table and its index of becomes the hot segment. The performance may be damaged.
    It is impossible to partition the HASH table, because it is not easy to remove obsolete data.
    What do you think?
    Thank you

    Yes, it is easy to distribute the data on multiple disks because filesystem used for the tablespace datafile (s) must be eliminated in a first time on several disks in widths of stipe physical 64 K, 128 K or 1 M. (listed bandwidths are just more common).

    The question is do you have a performance problem now. If not then the partitioning schema that you consider should behave about the same with regard to the charge of inserting and you will be able to use drop partition instead of deletes for the new regime should work better overall. Providing all the global index is not necessary.

    IMHO - Mark D Powell-

  • All of a sudden my system became very slow and duration start increases 15-20 min.

    Hello friends,

    I have laptop model Dell XPS. This is the start time increases by nearly 15-20 minutes approximately.

    When I turn on the laptop computer, a black screen continue for 5 min. and then it displays the login screen. After entering the username and password it takes 10 min. until the screen is displayed and a circle begins to run on the icon network in the bottom right of the laptop screen as shown below:

    You can see run circle right next to the icon of volume and during that time, I can't even open the Windows Explorer.

    I have to wait until this stop running for the next 5 to 8 min.

    I tried to clean the useless/content files using CCleaner software, but nothing happened.

    What should I do now.

    Do I have to format the laptop. In fact I already format the laptop 4 - 5 times earlier.

    Thank you


    Check with Dell support, their books online, the drivers/firmware, diagnostics,
    and ask in their forums known issues.

    Dell support

    Dell support drivers - product manual & warranty Info (left side) - and much more

    Dell forums

    Check in Control Panel - Device Manager to be sure is not a problem of such device
    as a USB device is not found (although it could be any device). If it is
    is a problem with a removable device power - take - off and then check that the

    Error: Windows Explorer has stopped working

    Crashes Windows or freezes<- try="" these="" first="" and="" the="" methods="" do="" apply="" to="" your="">

    Performance and Maintenance<- check="" these="" especially="" the="">

    Other methods of troubleshooting to use according to your needs:

    Use the startup clean and other methods to try to determine the cause of and/or
    eliminate problems.


    References to Vista also apply to Windows 7.

    What antivirus/antispyware/security products do you have on the machine? Include
    everything you've ALWAYS had on this machine, including those you have uninstalled (they
    remains of leave behind which can cause strange problems).


    Follow these steps:

    Try these to erase corruption and missing/damaged file system repair or replacement.

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run check disk in Windows 7


    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows
    Vista or Windows 7

    Use advanced tools to solve performance problems in Windows 7

    Problems with the overall speed of the system and performance

    Optimize Windows 7 for better performance

    Open the troubleshooter of Performance

    To see everything that is in charge of startup - wait a few minutes without doing anything-
    then right click on taskbar - task manager - take a look at Applications.
    Process - Services - this is a quick reference (if you have a little box on)
    Lower left - show for all users, then check that).

    How to change, add or remove startup programs in Windows 7

    Is a quick check to see who are loading method 2 - using MSCONFIG
    then after a list of these here.

    Tools that should help you:

    Process Explorer - free - find out what files, registry keys, and other objects
    processes have open, which DLLs they have loaded and more. This unique
    powerful utility will show you even owned by each process.

    Autoruns - free - see what programs are configured to start automatically
    When your system boots and you connect. Autoruns also shows you the complete list
    locations of registry and files where applications can configure start automatic settings.
    Process Monitor - Free - monitor file system, registry, process, thread and DLL
    activity in real time.

    There are many excellent free tools from Sysinternals

    WhatsInStartUP - free - this utility displays the list of all applications that are
    loaded automatically when Windows starts. For each application, what follows
    the information is displayed: Type of startup (registry/Startup folder), Command - Line
    Channel file, the product name, Version, company name, location in the registry or
    file system and more. It allows you to easily disable or remove unwanted programs
    that runs in your Windows startup.

    There are many excellent free tools to NirSoft

    Window Watcher - free - do you know what is running on your computer? Maybe
    not. The window Watcher says it all, every window created by each execution of the statement
    program, if the window is visible or not.
    Many excellent free tools and an excellent newsletter at Karenware


    Think about it an absolute must - manually update your drivers.

    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded
    on your system. For each driver in the list, additional useful information is
    Poster: load address of the driver, description, version, product name,.
    company that created the driver and more.

    For drivers, visit Maker as replacements and system manufacturer of device which are
    the most recent. Control Panel - write - graphics card - device manager
    the brand and complete model of your video card - double click - tab of the driver-
    Note the version information. Now click on UPdate Driver (this can do nothing
    MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
    This will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
    If there are 3rd party with their own software and drivers and the other main device drivers
    you have.

    Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
    and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
    their latest versions. (Look for the system to update the BIOS, Chipset and software updates
    Site of the manufacturer here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
    REBOOT after each installation.

    Always check in the Device Manager - drivers tab to be sure the version you are
    installation actually appears. This is because that some rollback of drivers before the
    later is installed (particularly that audio drivers) so install a driver - reboot.
    Make sure that it is installed and repeat if necessary.

    Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
    SCANNER - check manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.

    Installation and update of drivers under Windows 7 (updated drivers manually using
    the above methods is preferable to ensure the latest drivers from the manufacturer of system
    and device manufacturers are located)

    If you update the drivers manually, then it's a good idea to disable driver facilities
    in the updates of Windows, which leaves on Windows updates, but it will not be installed
    pilots who are generally older and cause problems. If updates provides a new
    driver then hide it (right click on it) and then go get new ones manually if
    you want.

    Stop Windows 7 to automatically install device drivers

    How to disable automatic driver Installation in Windows 7 / Vista

    Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
    Professional, comprehensive and Enterprise edition)


    Refer to these discussions because many more excellent advice however remember to check
    your antivirus, the main drivers and BIOS update programs and also to solve problems
    with the first method cleanboot.

    Problems with the overall speed of the system and performance

    Performance and Maintenance Tips

    Explorer Windows stopped working

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • my XP start very difficult upward since I installed the 7 Fushion

    I installed on my Imac Fushion 7.0 that I upgraded my Imac to Didier. Since then, I had no problem with my windows XP startup. Subsequently, it takes 15 minutes prior to the start of my windows. What should be the reason?

    How much memory that I better do my windows under the heading mode, processors how I choose... in my memories of the software mode settings box?

    Help, please

    [email protected]

    If your iMac is mid-2011, so take a look at: Re: Yosemite and Fusion 7 - very very slow

Maybe you are looking for