My system restore loads, accepts established and created but never treated successfully restore points why?

Similar Questions

• Impossible to create a system restore point and get the error code: 0 x 81000202.

  Original title: could not create a system restore point

  I have Windows 7 Edition home premium.

  I can't create a system restore point.

  I go to control panel > system and security > system > system protection

  and get the following error message:

  There was an unexpected error in the property page.

  The VSS service uses the system restore does not work.

  See the event log for more information. (0 x 81000202).

  I also ran a sysscan but all right.

  How can I create a system restore point?

  Thank you very much

  David

  If you have any software backup as totalrecovery pro 9 or norton ghost, they prevent you from creating a manual restore point.  I have 9 pro full recovery and everything I do is to disable the Recovery Manager when I want to create a manual restore point.  There is no problem with system restore points created they work very well it is the manual of who are the problem.

  Frank

• How to create a system restore point

  Hello. have a new laptop, and I would like to be able to create system restore points before as I have download things, when I go to the system restore, it asks only if I want to go to one and not how to create one.  Thank you.

  Hello

  Here is a link to a video on How to create a restore point In Windows 7 from Microsoft.

  Always ensure that backups and restore points are not placed in the HP_Recovery partition. It is usually the d: drive.

  Best regards
  ERICO

• Is it possible to defragment AND keep the system restore points to lose in Win XP?

  Sometimes my system restore points disappear and I have learned to rely on them.  I heard that defragmentation can erase the system - something to do with the Windows shadow copy service restore points.  Is there a safe way to defragment a hard drive (internal or external) WITHOUT losing any system restore points: both those created manually as well as automatically created? I have a lot of disk space and all criticalWindows updates. No malware. CHKDSK not display any errors.

  Joel-

  I really thank you goes out all the time and difficulties that you have not only to explain my problem but at the arrive at a solution that has worked for you.  I already read the CNET critical user of and download Ultimate Defrag, but have not yet installed it because I have a few questions that may be critical to my getting the same wonderful performance you met.  Not wanting to - by my own ignorance - replace one problem with another, can I ask if you know where I can find these answers? :

  (1) my PC has 1 G of RAM an and a Pentium 4 processor, a desktop Dell 8 years.  Have I not enough resources for the programme of work?

  (2) I have two internal HDs - a bunch of 80 G and 40 G Data - with a 1 t external for backups.  Will I be possible to defragment one at a time so that a period of 8 hours at night will give the app some time to run and complete - especially the first time I use it on every HD?

  (3) a review mentions a setting from the default installation for those who have my knowledge minimum tech. Is it choose a wise move in my case? I only will give non-essential options or options I'd understand even when doing this?

  (4) I need to turn off WinPatrol (Start Menu Manager) and install my Avast AV in addition to all the normal precautions for cleaning?

  (5) should I disconnect from the internet before installing (I have a shortcut on the desktop that allows me to turn off my DSL modem)?

  (6) can the program itself or its installer to run in Mode safe and which is preferred? Of course, I would create a prior restore point I have restart mode without failure.

  (7) a critic says that the 50-page help document is of no use to someone with my limited knowledge. Is there a training video or another type of help?

  If I have already imposed on you enough, perhaps some other experienced users could help answer the above?

  Thanks again!

• Failed to create system restore point, the option is grayed out

  Original title: System Restore point

  I can't manually create a system restore point, the box is grayed out. Also it does list not the previous points to restorew, but the so-called whenever I have use windows update it is to create a.

  Hi mandmmiller,

  1. don't you make changes before the show?

  Try these steps and check the result.
  Step 1: Start Windows backup and Volume shadow copy services
  a. Click Start, type services.msc and press to enter.
  b. in the list of issues, double click Windows backup and Volume shadow copy services.
  c. change the startup type to automatic and click on the Start button.
  d. click ok to apply the changes.

  Step 2: Run SFC (System File Checker) scan to find and repair missing or corrupt system files and check the result. To do this, try the following steps:
  a. visit http://support.microsoft.com/kb/929833
  b. run the scan successfully.
  c. restart the computer so that the changes take effect and check the result.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After you create a system restore point manually, I can't find the point.

  Original title : What's next?

  After you create a system restore point manually, I can't find the point.  Where is he?

  Hello

  More than you probably ever wanted to know.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  How to turn System Restore on or off in Vista
  http://www.Vistax64.com/tutorials/66971-system-restore.html

  Adjustment of the amount of disk space, System Restore uses for restore points
  http://bertk.MVPs.org/html/diskspacev.html

  How to change how much Space System Restore can use
  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
  http://www.Petri.co.il/change_amount_of_disk_space_used_by_system_restore_in_vista.htm

  ShadowStorage vssadmin commands
  http://TechNet.Microsoft.com/en-us/library/cc755866 (WS.10) .aspx
  http://technet2.Microsoft.com/WindowsServer/en/library/89d2e411-6977-4808-9AD5-476c9eaecaa51033.mspx?mfr=true

  Guide to Windows Vista system restore
  http://www.bleepingcomputer.com/tutorials/tutorial143.html

  Expiration errors occur in Volume Shadow Copy service writers, and shadow copies are lost during
  backup and at the time when there are high levels of input/output
  http://support.Microsoft.com/?ID=826936

  A good utility:

  Explorer of the shadow - free
  http://www.ShadowExplorer.com/

  You can also view the bridges restore in CCleaner - tools - system restore.

  CCleaner - free - on the left side click on download from Piriform
  http://www.Piriform.com/ccleaner/download

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Cannot create 0 system restore point error code 80070057 x

  Hello

  Please help me with this error:

  Today, when I do a manual create a system restore point, I received the following message "could not perform scheduled task for the following reason: parameter is incorrect." I do a sfc/scannow, but the process has frozen the audit of 100% and has not given any results. I have also uninstall the antivirus software and redo the creation but without success. Please let know me what I can do?

  Thank you

  Negis

  Hello

  Sorry for the late post. I don't try to back up or restore. I just want to create a restore point.

  Netherless, I followed the advice on this thread http://social.technet.microsoft.com/Forums/en/itprovistasecurity/thread/37160397-349e-4aa2-992e-1ffe58b5e51e and renamed the SR file in %windir%\System32\Tasks\Microsoft\Windows\SystemRestore to SR.sav and can create restore points successfully. So I create a restore point, a new SR file is created adjacent to the old (SR.sav)

  However, is it to let the SR.sav file remains in the folder or just delete it? Is it possible that renaming some files to offset it later?

  Please kindly answer. Thank you

  Negis

• I can't create a system restore point.

  I can't create a system restore point.  I'm told to group policy won't let me.  I got error 0 x 80070750

  Hello

  Method 1:

  I suggest to run the SFC (SFC scan) system on the computer and then try to create a restoration point and check if it helps.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  I also suggest you to perform check disk (chkdsk) on the computer and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Note: You may lose any amount of data while performing the check disk.

• Get 0x800700B7 error code when you try to create a system restore point.

  Original title: could not create a system restore point.

  Running Windows Vista and trying to set system restore point in System Properties System Protection. Receive, "cannot... file already exests...» 0x800700B7. what I'm doing wrong or not done? Be nice... I am a Virgin computer! LOL PS - the laptop is a hand me down and contaminated by _:)

  Do not know what measures allowing you to create restore point.

  Here is the step by step:

  Start button > in the search box, type backup and Restore Center > press the Enter key > left column > click on create a Restore Point or change settings > wait > in the window system properties, put a stop to the OS (c :)) (System) > click the button create near the bottom right > the rest should be self-explanatory.)

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• system restore points when they and how do I remove them

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Behold, it is I reinstalled Vista and now my portion of my hard drive recovery is almost full and he tells me to delete some of my restore points which could clear enough space to take care of the necessary space.  I tried to find files to restore and no luck in that area someone can lend a hand in this area pease.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Don't forget to check with the system manufacturer for instructions, as the recovery of your system and the
  Restore points should not have one impact on the other. Did you use OEM manufacturer system
  disc to re - install Windows?

  Phantom memory also holds your restore VSSadmin points it defines parameters.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  How to turn System Restore on or off in Vista
  http://www.Vistax64.com/tutorials/66971-system-restore.html

  Adjustment of the amount of disk space, System Restore uses for restore points
  http://bertk.MVPs.org/html/diskspacev.html

  How to change how much Space System Restore can use
  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
  http://www.Petri.co.il/change_amount_of_disk_space_used_by_system_restore_in_vista.htm

  ShadowStorage vssadmin commands
  http://TechNet.Microsoft.com/en-us/library/cc755866 (WS.10) .aspx
  http://technet2.Microsoft.com/WindowsServer/en/library/89d2e411-6977-4808-9AD5-476c9eaecaa51033.mspx?mfr=true

  Guide to Windows Vista system restore
  http://www.bleepingcomputer.com/tutorials/tutorial143.html

  Expiration errors occur in Volume Shadow Copy service writers, and shadow copies are lost during
  backup and at the time when there are high levels of input/output
  http://support.Microsoft.com/?ID=826936

  A good utility:

  Explorer of the shadow - free
  http://www.ShadowExplorer.com/

  -Free - CCleaner can also see Restore Points and remove everything except the last.
  Tools - System Restore
  http://www.Piriform.com/CCleaner

  CCleaner - Forums
  http://Forum.Piriform.com/

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Error 0 x 80070715 cannot create System Restore Points in Win 7 Ultimate SP1 x 86.

  Hello everyone. Please, let me explain my problem started after returning to Win 7 win 10 Pro (version unknown). When I tried to create a "System Protection" System Restore Point I received a list of error codes for the following messages:

  (1) error 0 x 80070715 es.dll SWPrv.dll eventcls.dll msxml.dll VSSUI.dll not loaded, when you try to re-register vs.

  (2) system WMI Writer MSSearch Service WMI Writer State 10 Failed Time out writer, during the seizure of the writers of vssadmin list on cmd as administrtator.

  No backup Windows works, so I ask the Comunitity to give me a chance to have my OS very well.

  Thank you for supporting me, my best regards, bifolk BO IT.

  Hello. I solved it by installing Win 10 Pro. Bifolk BO IT.

• Windows 7 - How to create installation of the automatic system restore points

  After installing Norton 2010 Security Suite, my hp officejet pro 8500 printer stopped printing. When I tried to do a system restore, I found that I had only a restore point and that was created after the installation of Norton.

  Under XP, I had restore points created every day, automatically.

  How to configure the creation of automatic system restore points in Windows 7 Pro?

  Hello Mikeoncamano,

  Welcome to the Microsoft Answers site

  Turn on or turn off System Restore

  System Restore regularly changes made to your computer's system files and uses a feature called system protection to create restore points. System protection is turned on by default on the hard disk that Windows is installed. You can enable restoring the system for other disks by turning on system protection for these disks.

  You can not turn on protection system for a disc is formatted by using the FAT or FAT32 file systems.

  To turn on System Protection

  Open system by clicking Start , right-clicking computer, and then click Properties.

  In the left pane, click system protection.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Under Parameters of Protection, click the disk, and then click Configure.

  Do one of the following:

  To be able to restore system settings and previous versions of files, click on restore system settings and previous versions of the file.

  To be able to only restore previous versions of files, click only restore previous versions of files.

  Click OK, and then click OK again.

  Kind regards

  It will create automatically restore points when there are changes to the computer or Windows.

  Disable your Norton protection system and check if she created the restore point...

  Bharath
  Microsoft technical support

• create a system restore point cases printers stop working

  I have two HP printers (Laserjet 1536dnf & Officejet 6500) installed on a PC running Win7 64-bit.  Until January, they worked very well after Win7 updates (restore point created automatically).  Since then, any time a system restore point is created I lose access to these two printers.  By clicking on "Devices and Printers" opens the window and the progress bar goes to infinity with nothing found and the process must be closed with the Task Manager.  Printers are not accessible, but no error message appears.  Any reference to a printer causes this particular process hang and must be closed with the Task Manager.

  Both printers are wired Ethernet to Cisco E3000 router and are set up to be shared in the same home group.  Oddly, a second PC in Win7 that is connected via Ethernet to the same router, using the same two printers can create the system restore points without any impact on these two printers.  The main difference between the two is that the PC works an AMD based system, while the affected uses a system based on Intel.

  Printer is restored when I restore the system since early January restore point.  Any later restore point using simply reproduces the problem. I have searched the FAQ and forum but can find no cure.

  Hi Amundarken,

  Thanks for posting your query in Microsoft Community and thank you for the opportunity to help you.

  After the description of the problem, looks like HP printers (Laserjet 1536dnf & Officejet 6500) stop working after you have created a restore point system.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following question:

  You receive an error message or error code?

  Follow the suggestions below for a possible solution:

  Method 1: You can check the status of the Printer Spooler service after you have created a restore point system, if the Printer Spooler service is not started and then start the service and check:

  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print. If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, Spooler subsystem or spooler resources, you might need to change and then restart the print spooler service on your computer.

  To do this, we recommend that you save your work and restart the computer to restart the print spooler service. If you do not want to restart the computer, try these steps.

  To change or restart the print spooler service, you must be logged on as administrator to perform these steps:

  a. click Startand then click Control Panel.

  b. double-click Administrative Toolsand then click Services.

  c. double-click the Printer Spooler service, and then change the startup type to Automatic. This option sets the spooler service starts automatically when you restart the computer.

  d. If you want to start the spooler service immediately, click Start in the area of The State of the Service .

  Method 2: You can update the printer drivers and check if it works.

  See the following articles from Microsoft for more information on the update of drivers:

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

   

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• None of the documents that I saved/created are deleted when I restore to a system restore point?

  I currently have problems with my Toshiba A305 S6905. This is the webcam does not work. I tried everything, including the installation/uninstallation of drivers, it was working a week ago. So I decided to go back to a system restore point, just to see if I installed something wrong.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  System Restore affects file system of Windows, programs and registry settings. It can also make changes to scripts, files, batch and other types of executable files on your computer.

   

  Note

  System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.

• System restore points to randomly disappear and must set a new restore point

  Original title: System Restore

  My system restore points disappear randomly and I have to set a new daily restore point.

  Pat

  The point of view of McAfee:

  http://service.McAfee.com/FAQDocument.aspx?LC=1033&ID=TS101062

  Like many other users, I would not use McAfee software. Everything also a subscriber of BT, I don't believe in using the software provided by BT. There are many freeware alternatives, providing a good service.