My system takes about 7 to 10 minutes to connect to the network.

Similar Questions

• 20 minutes to connect to the network anywhere

  I use a Compaq laptop with Windows Vista SP 2 OS on a home network. It takes me 20 minutes to connect to a wireless network at home, at a library, in a hotel or in a place like Starbucks wifi. I am at a loss to explain why this is happening!

  Hello

  I suggest you try to update the latest drivers for the network adapter and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  It will be useful.

• LaserJet Pro M201nw: M201nw LaserJet Pro no longer meets the ePrint requests, a few minutes after connecting to the network

  I've just implemented a new M201nw of the LaserJet Pro and it works fine, except for a problem with the printer with ePrint.

  I could implement Web Services on the printer and add it to as an ePrint, connected HP printer. Thanks to ePrint and Google Cloud Print printing for a few minutes after you have turned on the printer.

  But after a while, that can last from 3 to 10 minutes, the printer appears as "offline" in connected HP. If I check the settings ePrint to the printer through the front LCD or the web interface, for "ePrint Server Status", one of two things happening: sometimes there's just busy, or after a few seconds, I see "connection error. Check the Internet connection. »

  When I see the error message, I ask 'Tour ePrint temporarily turned off.' The printer will reconnect ePrint and work for a few minutes again.

  Local networking features of the printer such as network printing and web interface do not seem to have any problems.

  I don't think that the problem is related to my internet connection, which is reliable. I can monitor the traffic on my network and see communication between servers, XMPP from HP ePrint and the printer when the printer is working normally. When the printer has this problem, I still see the traffic coming in from HP but no traffic coming out of the printer. It's very strange and suggests part of the firmware of the printer does not work properly.

  Anyone else had problems with this printer model?

  Finally, I have determined the cause of the problem. While doing a follow-up, I discovered a router not authorized on the network itself advertising via the Protocol RIP (Routing Information) emissions. It seems that his presence finally confused the printer to know where to send the traffic. After turning off the emissions from the router, the ePrint feature, now works well.

• Cannot connect to the network or perform system restore after installing updates have been

  WIN 7 Home Premium running on a gateway PC connected to the internet via an ethernet connection using a RealTek network adapter for the past 5 years with no problems. Running Avast Pro antivirus / internet security.  09/02/2016, Microsoft and Avast downloaded and installed updates on the PC.  After the PC auto-redémarré as part of the Microsoft updates, I couldn't connect to the internet.  Connect to the network now says unidentified network - no network connection.  The adapter looks like to she always sees the (watch 100 Mbps) connection, but no data packet move.  Device Manager indicates that the unit is working normally.

  I ran through the resolution of the problems of Windows network. I checked the cable was attached, reset the home modem, reset the adapter (toggle), uninstalled/reinstalled using the latest adapter driver available.  I have disabled the Windows Firewall because Firewall Avast wouldn't start.  I disabled all the Avast settings to see if it eliminated the problem.  I tried to run the system restore before the updates but continue to spread the message that there was an unexplained error and restore failed.  All this was done in Normal mode. I restarted mode safe and had the same problems without success.

  I was able to clear the problem by manually uninstalling updates of security Windows which were loaded on 09/02/2016 through the programs and features Control Panel. Then I did the repair of Avast program operation.  I rebooted the computer and the internet connection worked. Then I reinstalled manually updates Windows security on the Windows Update program.

• my computer runs very slowly - takes 5 to 6 minutes to connect to the e-mail.

  The problem is to connect to the internet or e-mail, I have to wait long before you connect.  This grit: about 2 weeks ago when all slowed.

  Hi Milly,.

  Adding valuable suggestions from Steve, check to see if the following helps you.

  Is it only the internet connection that takes time or any slow computer?

  If it's the Internet, see the following article.

  Why is my Internet connection so slow?

  If it's the computer, see this article.

  Optimize your computer for peak performance

• EM takes about 5.5 GB of free space in the tablespace Sysaux

  Hi all
  
  EM takes about 5.5 GB of space in the sysaux tablespace. I questioned the v$ sysaux_occupants to see the use of the space. Database is 10g 10.1.0.2.0.
  
  SQL > Select * from v$ sysaux_occupants where occupant_name like '% EM % ';
  
  OCCUPANT_NAME SCHEMA MOVE_PROCEDURE MOVE_PROCEDURE_DESC SPACE_USAGE_KBYTES OCCUPANT_DESC
  --------------- -------------------- ------ ------------------------------ ------------------------------ ------------------
  Emd_maintenance.move_em_tblspc EM Enterprise Manager repository SYSMAN procedure move for Enterprise Manager repository 5798528
  
  
  
  SQL >
  
  
  How can we reduce this use of space in the Sysaux tablespace instead of create a new basis for EM & this move towards this tablespace? I've seen some info on the reduction of the use of space AWR. But how can do us with the use of EM space? Here are the problems involved or we have to its own tablespace only of EM?
  
  
  Any help will be greatly appreciated.
  
  Thank you
  Nilesh.

  Hello

  doc
  Manage Tablespace SYSAUX
  http://download.Oracle.com/docs/CD/B28359_01/server.111/b28310/tspaces010.htm
  http://www.nalanta.com/2008/11/02/space-management-in-SYSAUX-tablespace/

  Kind regards
  Tom

  Published by: Soli on 17.8.2009 09:52

• OfficeJet 6500 E710n-z: where to locate X 86 Drivers for Win 7 to print Via USB system connected to the network using Win 8.1

  Since my computer can only connect to a printer wireless via USB, other computers on the network cannot connect to the printer.  The possibility of allowing other printers using the main system of sharing, I need the x 86 driver but cannot locate it on the HP support.

  Seems there are a lot of problems installing with HP systems, I would hope that society can give a high priority to these issues.  Many of us love quality HP but wireless connectivity is frustrating.

  In a humorous way, please remove the "cannot find the printer - make sure that the printer is plugged in and turned on."  statement.  Our children know how to set up a network, so that the statement is hilarious, until you see for the 20th time as possible motive to the wireless printer is not found on the network.

  Hello
  My post seemed to have grown to a case manager who was willing to put up a time for the members of technical support to contact me.  By the way, she asked about the distance, the printer from the router, which, by other reviewers, should be placed next to the printer, and she asked for me to try to move the router to about 18 inches from the printer so that it would be responsible for coordinating the call of support following our conversation.

  I did it and all network issues related to wireless access by the entire Office has been resolved and performing network and each station can print and scan in a few minutes, following a job application.  Printing took about 20 minutes to start and sweep was impossible until this Council been offered.

  Many congratulations to Yvonne!  And, I thank you for following up on this post.  I am a very satisfied customer again once my application has been met with personal concern for the issue and an appropriate resolution and FANTASTIC found!

  Thank you once again,

  Rick

• Express airport, used for the speakers, loses the connection to the network wireless after about 30 seconds

  Second generation of airport express base station used to play music loses connection wireless, also a second express network, gen airport after about 30 seconds.  Tried to change channels, reorienting the airport, using a different device - ipod and ipad, to listen to music - nothing works. Interestingly, my Amazon Music plays fine on the same airport and speakers and loses no signal.  Any help?

  Where the two Express base compared to the other station? Same room, different rooms or different floors? The host of iTunes (iPod or iPad) location when the streaming? Near the Express which provides the network Wi - Fi or the one used for streaming?

• OfficeJet 6500 e710n: my can´t officejet 6500 detect the wifi router, expire after 20 minutes of searching. The network works

  Hello

  I connected to a router Thomson lapttop two stand-alone and two desktop PC wifi printers. As I can connect to the web

  and surf without problem that the router seems to work at least partially.

  The problem is that printers will not find the router, when I try to configure the printers in the control panel printers, they are looking for the router, but they do not find the wifi (router) connection. After 20 minutes, they then expire without something else facilities worked very well before.

  I called the support to my ADSL provider and they remotely reset the router to factory settings initial but it helps. didn t have tried to turn off the router, printer and laptop computers and then started the router, printers and portable - the same problem. I think that the problem is not in the printers that I have the same problems on both printers.

  Can it be a partial problem with the router, I find that it is unlikely that the problem lies in the printers, because they took place att simultaneously.

  It is a mystery to me and any suggestions are appreciated.

  Bo

  Hello

  It seems more likely that the question is based in your router as the problem affects two different printers.

  For troubleshooting end please move the printer near the router, but not too close... 2-3 meters would be at an ideal distance for testing.

  If you don't see the router yet, may is a Dual Band router?

  It broadcasts at 2.4 GHz?

  Pleae also run a Test report wireless one of the printer, it may help to get a better understanding.

  In the Configuration Menu, select network, go search for Wireless Test report.

  If you can join an analysis of the results of the tests, it would be great.

  Kind regards

  Shlomi

• Error message: "unable to connect to a windows service windows could not connect to the system event." Unable to connect to the network, Windows Vista Home Edition

  Hello

  When I start my laptop there is a long pause between the home screen and the cover page of my office where the message "unable to connect to a windows service windows has no can connect to the system event. I am unable to connect to networks as says "the dependecy service or group could start. I checked some of the solutions to this problem, including the execution of the 'netsh reset winstock' program that did not work. Any advice would be very helpful. Thank you.

  Hello

  It would be a good idea to run the System File Checker tool to see if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  ___________________________________________________

  And Malware scan:

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• New computer falls a few minutes after connecting to the Internet.

  When I firstl newspaper in my internet computer will work fine, but after a few minutes, I get the dns server does not. How can I fix? My computer is new, I have troubleshooted my internet connection and all right?

  original title: WHY do I GET the SERVER DNS DOES NOT WHEN browsing WEB sites? HOW CAN I FIX?

  Hello Jackie,.

  ·         What is the operating system installed on the computer?

  Check to see if the following is useful.

  Method 1: Rinse and save DNS.

  a. Click Start. Click Run, type cmd. Press ENTER.

  b. at the command prompt, type the following command and press ENTER. It will display the message properly emptied the cache of DNS resolution.
  ipconfig/flushdns (there is a space between ipconfig and /)

  c. at the command prompt, type the following command and press ENTER:
  ipconfig/registerdns (there is a space between ipconfig and /)

  Method 2: Release and renew the IP address by following these steps.

  a. Click Start. Click Run, type cmd. Press ENTER.

  b. at the command prompt, type the following command and press ENTER

  ipconfig/release

  ipconfig / renew

  Now check the issue.

• Question about connecting to the network with a Terminal window

  Windows XP Pro, SP2, Fritz-card PCMCIA-

  Hello
  I am trying to create a connection from computer to computer by ISDN telephone line.
  I didn't install any software of specific composition, I only use the parameter of MS WinXP.
  Hardware works fine, I tested it successfully in composition in any other internet provider.

  Now I need to connect to a corporate network and they have a specific logon policy, where I need display Terminal window during the login procedure.
  So I turn on dial in properties connection on page "Security properties" dialogue box "show Terminal window.

  Problem during dial-in: the window does not occur.
  Second problem: if I go next time to this option, the input value is not saved.

  Any ideas?

  Kind regards
  Peter

  Please don't be crazy about me, but I don't see what's in your specific assignment for the Toshiba forum.

  You should speak with your company's network administrator and it should be able to help you. Otherwise, perhaps on some network specific forum you will have more chance to find what is the solution to your problem.

  If you have laptop Toshiba and everything you need for the connection works fine, I put t see to write here.

  In any case I wish good luck and hope that your network administrator will be able to help you.

• Beep every one or two minutes when connected to the a/c power

  This happens when I have my laptop plugged into the a/c power. How can I get him to stop? The tone seems to be connected to a power setting, because the brightness of the screen increases or decreases when my cell phone rings. I was unable to find the reason why he's doing this. Can anyone help?

  Two possibilities.

  (1) your system goes into power saving mode because it has not been used - check your power settings in the control panel

  (2) your system may be overheating and forced into a mode of power reduced to reduce the heat ouput - check your fans and vents work properly.

• Why should io I install the creative cloud? I thought it was a system of clouds and that I would just connect to the cloud?

  I just paid for creative cloud and am surprised I have install everything. I joined cloud because I thought I was going to be working on the "cloud" and have not to install anything on my computer. It takes all day and some things are not lacking for install...

  Philippe

  In order to install the creative cloud application, you must install the Adobe Creative Cloud application which is an Application Manager using which you can select App like Photoshop, Illustrator, InDesign, etc. According to your choice, not need to install all.

• System repaired after crash, now I can't connect to the internet.

  I had to fix some errors in the recovery console by using a step by step guide and it worked, but now if I click on explore I get a bunch of weird on my printer messages even though my printer is not connected. Eventually the Explorer opens, but it says that it cannot connect even though the icon in my status bar shows that I am connected to my wireless network. When I open firefox, I just get an empty alert message and firefox never actually opens. Could someone help me with this please? Thank you very much

  Jason

  Hello

  ·        What are the messages that you encounter when you try to connect to the internet?

  ·        You have problems with internet Explorer or internet connection?

  ·        What browser do you use and what version?

  I suggest following the steps mentioned in the article below and check if the problem persists.

  Internet Explorer does not start or stops responding

  http://support.Microsoft.com/kb/926449

  It might be that internet explorer is corrupted, I suggest you to re - install internet explore if you use internet explore 7 or 8 and check if the problem is resolved.

  How to reinstall or repair Internet Explorer in Windows 7, Windows Vista and Windows XP

  http://support.Microsoft.com/kb/318378

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.