My tablet is missing the 3G service?

Hi, I'm from Panama and I recently bought a lenovo thinkpad tablet.

My problem is at the moment, I'm unable to use the 3G service. But the Tablet has the slot for sim card so I am very confused.

It's the

Product ID: 183825U

I would like to know if this model does not have the mobile data service or it does not.

In the case, missing the sevice. How can I add it to my tablet.

Thank you very much.

I'm wainting for your answers.

Possible but unlikely. Instructions on upgrading and images, including the link of the video, in the last 2/3 of this thread:

http://forums.Lenovo.com/T5/ThinkPad-Slate-tablets/3G-upgradable/m-p/515331#M182

Tags: ThinkPad Tablets

Similar Questions

  • The Terminal Services WMI provider DLL is missing

    I have Windows POS 2009 ready installed.  The "WMIC SERVICE LIST" command fails with the absent error provider.  I checked the systems, and it seems that the "c:\windows\system32\tscfgwmi.dll" DLL is missing.  Anyone know how I get this installed on my system or what package installs this dll?

    I see it on m another system, but I can't determine what package installs.  I have all the updates that are installed.

    Please report all further follow-up replies to your new thread in the Windows Embedded POSReady forum: http://social.technet.microsoft.com/Forums/en-US/b4773ed4-23f3-4abf-ab8f-10f2b1d9198e/missing-terminal-services-wmi-provider-dll?forum=posready

    That being said, you could see http://support.microsoft.com/kb/822664

  • Cannot install updates due to error code 0 x 80246008 and the BITS service is missing from the XP computer.

    Recently, I reloaded a fresh load XP on my laptop.  I was able to install SP3 and IE8, despite not being able to download them directly from the Windows Update site.  I tried several times to install updates, one, five and all at the same time and is unable to install.  I ran Fixit to many times and it says it solves some problems, but no single instance doesn't solve all of them.  I also tried to update after the launch of a clean boot, always to nothing does not.  I see many solutions on this and other Microsoft sites and I tried, but nothing seems to change the results.  FixIt has reported the following:

    -------------------------------------------------------------------------------------------------------------------------------------

    Details of the update of Windows editor

    Problems found
    Registration for the service is missing or corruptService registration is missing or damaged do not fixed
    Sign up for the service Reset Succeeded
     
    Problems installing recent updatesProblems recent updates installation not fixed
    Fix Windows Update succeeded
     
    Problems installing recent updatesProblems recent updates installation not fixed
    Fix Windows Update succeeded
     
    Check verrouillesfichiers missing or damaged missing or corrupt files fixed
    Repair missing or corrupt files Succeeded
     
    Windows Update, error 0x8024402C (2013-11-28-T-09_56_27A) 0x8024402C(2013-11-28-T-09_56_27A) of fixed Windows Update error
    Reset Windows Update of the data store Succeeded
     
    Verified issues
    Environment variables Windows Update are of incorrect update environment variable incorrectWindows Checked
    Some security settings are missing or have been changedSome security settings are missing or changed Checked
    Key of registry corrupt Patch registry Patch keysCorrupt
    Detects the hotfix or corrupt cache Checked
    Windows Update services aren't runningWindows update services do not run checked
    Encryption services components are not the registeredCryptographic service components are not registered Checked

    Problems found details

    Registration for the service is missing or damaged do not fixed
     
    Sign up for the service Reset Succeeded
     
     
    Recent updates installation problems not fixed
     
    Fix Windows Update succeeded
     
     
    Recent updates installation problems not fixed
     
    Fix Windows Update succeeded

    Check missing or corrupt files fixed
     
    Repair missing or corrupt files Succeeded
     
     
    Windows Update error 0x8024402C(2013-11-28-T-09_56_27A) fixed
     
    Reset Windows Update of the data store Succeeded

    Issues checked the details of the detection

    6 environment variables Windows Update are incorrect Checked
     
    Restore the Windows Update environment variables is not running
     
     
    Some security settings are missing or changed Checked
     
    Reset the security settings is not running
     
     
    Key of registry corrupt Patch Checked
     
    Detects the cache fix corrupted or missing
    Fix registry patch not working
     
    Fix registry patch problems
     
    Windows Update services do not run checked
     
    Required for Windows Update registry files works not
     
     
    Encryption services components are not registered Checked
     
    Save the cryptographic components not working

    Details of detection

    The service status

    ---------------------------------------------------------------------------------------------------------------

    Can someone point me in the right direction to solve this problem?

    Thank you.

    Original title: Windows Update will not install on the new load XP

    Hi all

    Thanks for your replies.  Sorry I didn't answer sooner, but he got late last night, and I got to reregister the Qmgr.dll and Qmgrprxy.dll BITS files.

    I clicked Start, click on run and typed the command following, and then click OK:

    Start, run and in the run box, Type regsvr32 qmgr.dll, click OK.
    Start, run and in the run box, Type regsvr32 qmgrprxy.dll, click OK.

    I was then able to start the updates.  There are 124 updates, the Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86.  He downloaded 124 updates, but even once asked me to insert the disc for qmgr.dll when he was installing the 10th update.  I find the qmgr.dll file again and pressed OK, but it seems to hang forever and do nothing, then I simply cancelled updates and closed during the night.  I have been relieved to have solved the problem of BITS, but is concerned by the hang up on the tenth update installation and he called again for the qmgr.dll file during the installation of updates.

    This morning, when I rebooted, it installed some updates at startup, and I restarted again.  He then held I first install the .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86 to date.  N BITS issue for that.  It took time, but completed settle.  Restart again and now there are only 21 updates to high priority required.  My guess is that he downloaded all 124 updates last night, but when I cancelled the installation after hanging on #10, he just started to install it again this morning and did so successfully.

    However, when I try to install the 21 remaining, he has not once again, and I find that the BITS service is not in the services again.  After I have re-enter the BITS service and restart it, the downloads are working again.

    I am now what I may need to reinsert and restart the BITS service whenever I need to download an update.

    Ideas, suggestions or comments?  I am slowly solve problems and if I persist, I can get this all taken care.

    Hi Dan,.

    From what you wrote, I understand where you are getting confused. Here are the steps to follow to solve this problem.

    Open the Windows search tool, copy / paste the following text, and then click Search: qmgr.dll

    Research should show this file in the following locations:

    C:\Windows\System32
    C:\WINDOWS\ServicePackFiles\i386
    C:\WINDOWS\system32\bits

    I hope they are all present, follow these steps to register the service.

    Click on start, run and copy/paste: regsvr32 qmgr.dll and click OK
    (If you do not have the command run in the start menu, hit the Windows key + R, instead)

    Do the same with this file: regsvr32 qmgrprxy.dll and then restart.

    Here are the next steps.

    Copy / paste this command in the field to run, and then click OK
    %windir%\System32\rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\qmgr.inf

    Windows will launch a dialog box asking you to insert the Windows installation CD. Ignore this and change the way downstairs to C:\WINDOWS\ServicePackFiles\i386

    The reason to change the path to the i386 folder is that the files that are there are newer than those on the Windows installation CD.

    Then restart the PC again and continue with the rest of the troubleshooting steps.

    Click on start, run and copy/paste the following and click OK: services.msc

    You should now be able to see the Background Intelligent Transfer Service, or just "BITS" displayed in the list of Services.

    Double click it to open BITS and then click on the Start button. This is just a test to make sure that it works correctly.

    If you get 2 error: cannot find the specified file, click on start, then run again and copy / paste the following command, and then click OK:
    Tracking Add HKLM\SYSTEM\CurrentControlSet\Services\BITS\Parameters /v ServiceDll /t REG_EXPAND_SZ /d %windir%\System32\qmgr.dll

    Restart then try and start the BITS.

    If you get the same error again, copy / paste the following text in the field run and click OK:
    Reg add HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackup

    Reboot once more and then try and start the BITS.

    Let me know how you please.

  • Windows 7 Security Center service is missing from the (local) services and cannot be started

    Hi Experts,

    I use the version of windows 7 Home premium. My computer suddenly got hit by the virus and I found the message in the center of action as "Activate windows Security Center service", but when I do, the message I m getting "failed to start the windows Security Center service"

    Options, I tried to replace as follows.

    one) went to the services (local) and checked the Security Center to check the startup mode but the Security Center is missing here
    (b) tried to run the malwarebytes software, he finds some virus and I deleted

    Yet, I could not able to get rid. Help, please

    Hello

    Some antivirus/security products may cause this error. McAfee, Norton, Windows Live OneCare.
    ThreatFire are some. What antivirus/antispyware/security products you have on machine now. And
    who have you ever on it, even if you have uninstalled them. (These leave the remains that can cause some)
    strange questions.)

    Start - type in the search-> find abuse at top box - click on - RUN AS ADMIN

    Service set to AUTOMATIC (delayed start) Security Center and BEGAN to
    Chech also the serices dependent as below.

    References to Vista also apply to Windows 7.

    Check the default services and dependencies to ensure that they are running.
    http://wiki.blackviper.com/wiki/Security_Center

    Security Center not related anti-virus or firewall State correctlyhttp://www.winhelponline.com/blog/security-center-not-reporting-anti-virus-or-firewall-status-correctly/

    How to fix Vista Reporting incorrect information Security Center
    http://www.Vistax64.com/tutorials/195736-Security-Center-not-reporting-correct-information.html

    How to disable or enable the Security Center in Vista
    http://www.Vistax64.com/tutorials/67737-Security-Center.html

    This thread might help as it might be a permissions problem.
    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3d2049ae-4581-439b-8E15-3f603f5c60f0/

    ====================================

    To look for the Windows 7 KB and responses for Solutions (most are above).

    Searck of Ko &-> 1058 Security Center
    http://support.Microsoft.com/search/default.aspx?mode=a&query=1058+Security+Center&SPID=14019&catalog=LCID%3D1033&AST=28&RES=10

    I hope this helps.

  • How to choose the account used for the sharing service Google/Gmail?

    I am always connected to three separate Google/Gmail accounts at the same time. Each is used for different projects/types of communications (e.g., personal work, another project). I want to use the service of sharing, but when I click on share it does not give the option to choose which account to use. This makes the sharing service for the most useless. Could you if you please correct this? Thank you!

    I missed this: https://activations.cdn.mozilla.net/e.../gmail.html and, even though I am connected to multiple accounts. I asked the team about this feature. However leave a comment for developers input.mozilla.org is also a great place to request this feature.

    It seemed so nice:
    https://addons.Mozilla.org/en-us/fire.../?src=search

  • Satellite L355 - the PNRP service does not start

    My Satellite L355 can't join a homegroup on my home wireless network, because the PNRP service will not start. The service depends on, Peer Networking Identity Manager, PNID, starts. File missing or corupt?

    Any ideas how to fix?

    Thank you, Jack

    Hi jtorbert,

    Friend of me has had the same problem and it could solve the problem by deleting this file:
    "C:\Windows\ServiceProfiles\LocalService\AppData\R oaming\PeerNetworking\idstore.sst".

    This file has something to do with the PNRP service and after deletion it will be re-created. Generally, this service should work correctly after deleting this file.

    Check this box!

  • print spooler is missing Windows xp services

    Hi my daughter using a fujitsu siemens laptop running windows xp edition version 2002 service pack 3 family. We have tried to install 2 different printers, but always get says print spooler does not. I checked in the service and there is nothing indicated for printers or print spooler. I looked in c\windows 32 and there are 2 files of coil it but I do not know what to so that it reappears in the services and I can turn it on. can anyone help please?

    Man that's great, as I must have contracted a virus that deleted my services print spooler. Made exactly as stated in the information and then rebooted and it works perfectly now. Really appreciate the help!

    While it is definitely a good read, none of these links seem to tell you how to add the lack of Print Spooler Service and the Microsoft link certainly not will help you add the Service lacks and is a waste of time.

    The Print Spooler Service missing Services, you must add it (how do you suppose that happened?).

    I don't have XP Home Edition, but this method works on XP Pro and I do not see why it would be different.

    Here's how to add the Print Spooler Service:

    If your system is Windows XP Service Pack 3, you can add the Service of print spooler missing to your system by using a registry import.

    Before making any changes to your registry, back up the registry with this free and popular tool:
    http://www.SnapFiles.com/get/ERUNT.html

    Reinstall the missing Print Spooler Service by creating a registry file that you can import into your system (tested on Service Pack 3).

    If you already have a registry entry for the Print Spooler Service, you can export it to a file and save it.  The following example is the code of a working XP Pro Service Pack 3 system generic registry.

    Open notepad to create a new text file by clicking Start, run and enter in the box:

    notebook

    Copy and paste the following lines of text into the new Notepad file:

    Windows Registry Editor Version 5.00

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler]
    "DependOnService" = hex (7): 52, 00, 50, 00, 43, 00, 53, 00, 53, 00, 00, 00, 00, 00
    "Description"="loads files to memory for later printing."
    "DisplayName"="print spooler".
    "ErrorControl" = DWORD: 00000001
    "FailureActions" = hex: 80, 51, 01, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, e8, 47, 0c,------.
    00,01,00,00,00,60, EE, 00, 00, 01, 00, 00, 00, 60, ea, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00
    "Group"="SpoolerGroup."
    "ImagePath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.
    74,00,25,00 5 C 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.
    00,70,00, 6f 00 6f, 6 c, 73, 00, 00, 00, 76, 00, 2nd, 00, 65, 00, 78, 00, 65, 00, 00, 00
    "LocalSystem ObjectName"=""
    "Start" =: 00000002
    'Type' = dword:00000110

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler\Parameters]

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler\Performance]
    "Close" ="PerfClose."
    "Collect"="PerfCollect."
    "Collect Timeout" = dword:000007 d 0
    "Library"="winspool.drv".
    "Object list"="1450".
    "Open" = "PerfOpen."
    "Open Timeout" = dword:00000fa0
    "WbemAdapFileSignature" = hex: comic, 83, ab, a6, 1, 8A, d9, c8, cc, ff, b8, 69, f2, 94, 18, this
    "WbemAdapFileTime" = hex: 00, 20, 7, 22, cb, 2B, c1 01
    'WbemAdapFileSize' = dword:00023 c 00
    "WbemAdapStatus" = DWORD: 00000000

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler\Security]
    "Security" = hex: 01, 00, 14, 80, 90, 00, 00, 00, 9 c, 00, 00, 00, 14, 00, 00, 00, 30, 00, 00, 00, 02,------.
    00, 1 c, 00, 01, 00, 00, 00, 02, 80, 14, 00, ff, 01, 0f, 00, 01, 01, 00, 00, 00, 00, 00, 01, 00, 00,------.
    00,00,02,00,60,00,04,00,00,00,00,00,14,00, 8 d, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00,------.
    05, 0, 00, 00, 00, 00, 00, 18, 00, 9 d, 01, 02, 00, 01, 02, 00, 00, 00, 00, 00, 05, 20, 00, 00, 00,------.


    23,02,00,00,00,00,18,00, ff, 01, 0f, 00, 01, 02, 00, 00, 00, 00, 00, 05, 20, 00, 00, 00, 20,.
    02,00,00,00,00,14,00, fd, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00, 05, 12, 00, 00, 00, 01, 01,
    00,00,00,00,00,05,12,00,00,00,01,01,00,00,00,00,00,05,12,00,00,00

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler\Enum]
    "0" = "Root\\LEGACY_SPOOLER\\0000."
    "Count" = DWORD: 00000001
    "NextInstance" = DWORD: 00000001

    Save the new text file with extension .reg to your desktop or a folder with a name you can remember, something like:

    addspooler.reg

    After you save the file, close Notepad.

    Locate the file addspooler.reg on your desktop and double-click it.

    Alternatively, you can right-click on the addspooler.reg file, choose open with... and select the registry editor which will then import the file.

    Answer Yes to the following question: are you sure you want to add the information in the registry?

    You should then see a message that information has been registered in the register.

    I would restart at this stage to ensure that updates "stick."

    Now you should see the Print Spooler Service and you can right click, choose Properties and (if she isn't already) set the startup type to automatic and start the service if it is not running after reboot.

    Sine the Print Spooler Service should not be missed, I suggest you follow with this (or first):

    Download, install, update and do a full scan with these free malware detection programs:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.

  • Trying to turn on network sharing and discovery, I get the message 'the specified service does not exist as an installed service' I am running AVG internet security 2013

    When I try to change the networking of sharing and discovery, I get the above message.  I don't quite know what to try to fix the problem. Any thoughts would be helpful. Thanks in advance.

    Hello MarkPogue,

    Thank you for the question!

    I'm sorry to know that have problems you with the network sharing and discovery. "As I understand it, you get an error message" the specified service does not exist as an installed service ' trying to turn on network discovery.

    Make the SFC (System File Checker) scan and see if the problem occurs.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    Answer to us if you are having problems with the network discovery or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

    Good day!

    Hope this information helps.

  • OfficeJet 6500 a Plus: impossible to activate the Web services; roadblocks at all stages

    This printer is connected to my network by Ethernet. I want to activate Web services, so I can use ePrint.

    When I try to enable Web services from the printer control panel, I said that I might need to enter a proxy address. I'm not running a proxy server, but it is not possible around this prompt.

    There are posts on this Board indicating that Web services can be activated with a Wi - Fi connection. I unplugged the Ethernet cable and wireless enabled, but I was always invited address proxy information when I tried to activate the Web services. I disabled wireless and returned to Ethernet.

    A response to another post suggested updating the firmware to bypass the proxy server error. HP recommendation is to do it from the control panel of the printer. In the Panel menu control, firmware upgrade is the title of the Web services, which I can't because of the mistake of the proxy. So I downloaded the firmware and tried to install the update from my computer. The update found my printer on the network, but it is gray, saying 'Not applicable', under the State. I couldn't select it.

    In another post, someone suggested THAT DNS has been configured. I saw, through Server Web shipped by the printer, there is no configured DNS server (the printer is configured for manual IPv4). So via the integrated Web server, I tried to enter addresses (my domain controller, OpenDNS, Google) DNS server. With each of them, the SAP replied: "an error has occurred. (ipv4Page-400). Click 'OK' to go back. "There is no place to enter the DNS settings on the printer control panel.

    Web services require a Wi - Fi connection?

    Why the printer think there need a proxy address?

    The firmware update will solve the proxy error?

    I have to update the firmware, if the update statement indicates does not apply?

    What is another method for updating the firmware out of the control panel or from my computer?

    How to enter the DNS of the EWS information without getting an error?

    Jeffrey Pike

    Groton public library

    Charles:

    Thank you for taking the time to provide a complete response to my questions.

    I finally got the Web services enabled on the printer. What I had to do was enter the DNS settings in SAP to bypass the prompt for proxy information. Step I missed yesterday, when I got page not found error in the SAP, was that I had to do the secure version of the SAP ("https", not "http"), and then the EWS would accept my DNS entries. Once this is done, I went to the printer and could enable Web services without having to provide proxy information.

    The printer is now registered to hpconnect.com, and I can start letting my library to print patterns on my wireless network, that was my goal all along.

    Thanks again for your help.

    Jeffrey Pike

    Groton public library

  • Connection status: unknown, the dependency service or group could not start

    When I point the cursor on the network connection icon in the task bar is showing the message "Connection status: unknown, the dependency service or group could be started. But I always try to connect to the internet, if show a popup message 'The Wizard Error Message' with an error

    Component GUID: {7071ECA3-663B-4BC1-A1FA-B97F3B917C55}
    Component file: [C:\Windows\system32\connect.dll]
    Error: (0x8007277B)
    Additional information:
    Could not detect Internet connectivity
    If I always neglect the error and try to connect to the internet then system shows a message "The wizard cannot create the connection"...
    I would be grateful if someone could suggest the solution other than restart the system...
    I use windows vista as operating system...

    Hi Gattu,

    Please contact Microsoft Community.

    It would be great if you can answer the following question:

    Were there any changes made on the computer before the show?

    Follow these methods to solve the problem:

    Method 1:

    See the article and check if that helps:

    Network connection problems

    http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-network-connection-problems

    Method 2:

    I suggest you check out the link to use the System File Checker tool (sfc) to troubleshoot missing or corrupted system files in Windows:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Method 3:

    I would also refer to article to reset the Internet Protocol (TCP/IP)and check if it helps.

    Method 4:

    I suggest to disable the antivirus software and check if it helps.

    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    Note: run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

    If you are still experiencing a problem, please reply and we will be happy to help you.

  • Standalone update Windows Vista service pack 2 32-bit does not update because of missing files in service pack 1.

    Original title: lack of vista service pack 1 files

    updated standalone service pack 2 32-bit tells me he does not update my copy of vista 32 with service pack 1 installed. due to the missing files in service pack 1. Windows update says all updates, including service pack 1 are current and accurate.

    Hello

    What is the full error message that you receive?

    Method 1:

    You can see the KB article to reset the Windows Update components and check if you can install the stand-alone package of Vista Service Pack (SP) 2.

    How to reset the Windows Update components?

    Method 2:

    If the problem persists, then you can try the steps in the following article and check if this can help:

    How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

    Method 3:

    You also, try to run a SFC scan to check all corrupted files.

    You can read the following article to launch the SFC scan:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  • Windows Firewall settings cannot be displayed because the associated service is not running

    I get the message 'Windows Firewall settings cannot be displayed because the associated service is not running' when I try to restart my windows firewall, followed: due to an unidentified problem, windows cannot display settings.

    Can someone help me? I want to restart my windows firewall, which recentloy has stopped working.

    Hello

    No one program cannot be used to detect and remove any malware. Added that often easy to detect malware
    is often accompanied by a much more difficult to detect and remove the payload. So much better to be too full now
    than to pay a high price later. Check with them to an extreme exaggeration, and then run the cleaning only when
    you are, of course, that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
    the Windows when you can.

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
    a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses, Trojans,
    Rootkits, etc.) that has infected your computer despite all the security measures that you have taken (such as
    the anti-virus software, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    http://OneCare.live.com/site/en-us/default.htm

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Unable to backup get error 1608 the dependency service or group could not start

    Original title: unable to backup

    1608 the dependency service or group could not start. Task Scheduler does not

    Hi LesComan,

    Follow the suggestions below for a possible solution:

    Method 1: Try the SFC (System File Checker) scan on the computer.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Method 2: I also suggest you temporarily disable the software antivirus (and any other security software) and firewall on the computer and see if that fixes the problem.

    Disable the anti-virus software

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

     

    Firewall: Frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/firewall-frequently-asked-questions

     

    Caution:

    Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Let us know if it helps.

  • "the dependency service or group could start.

    Trying to open some applications I get this message.  How can I fix?

    Hello

    1 do these to erase corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------------------------------------------------------

    2. set ALL services back to their default values :

    Start - type in the search box-> find Services at top - click right on - RUN AS ADMIN

    BlackViper - Default Services - VIsta Service Pack 2 - scroll down to the default services
    http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/

    BlackViper - Default Services - VIsta Service Pack 1 - scroll down to the default services
    http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/

    =====================================================================

    If necessary after ALL the above, you can try an in Place upgrade/repair Installation that allows
    you keep the programs and data, even if redundant backups are always a good idea.

    You can use another DVD that aren't copy protected but you you need to own
    Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
    machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
    good backup or 3 (security in redundancy).

    On-site upgrade
    http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

    How to perform a repair for Vista Installation
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    I hope this helps.

  • "The dependency service or group could not start" - cannot open network connections to connect to the internet.

    Hello

    Ive recently managed to repair my Vista computer from a black desktop screen, by doing a Virus scan from kaspersky in safemode, thanks for the advice in this thread

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/a960276d-5147-4286-A437-711e96e25296/

    However, whenever I try to go to the network connections to connect to the internet, I get the error message saying "the dependency service or group could not start", so I can't update kaspersky for the last secuirity as well as not to use the internet. I tried the system restore, but there is no previous saved location for me to do. :(

    Any help would be greatly appeciated :)

    Thanks in advance

    Sam

    Medion M96350,

    Intel Core 2 Duo,

    T520 @1.5 - Ghz,

    Vista Home Premium

    Hello

    You can use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow the link below.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for