My themes are not working in my Windows 7 Ultimate

Similar Questions

• Microsoft solve this centre.will does not work in my windows vista Ultimate edition 32 bit

  i set downloaded Microsoft .but when I go to the for use, he comes up with an error, 0x80092003.a problem prevents to start troubleshooting, continuous .and that my windows vista is not genuine, so that worried me until I checked with the diagnostic tool Microsoft genuine advantage == 1.9.0027.0, that tells me that my windows vista is genuine.i thought it was real because I have all the documents of proof of licence.product key gold record which includes the upgrade of windows any time. so Microsoft fixed this is not working correctly.so why can't use it.i need not an apology for Microsoft fix, but only my product works. they are in fault here person don't else.so you please explain to me how we do answer work.please I would use my Microsoft solve this product

  Hi R P Dunford,.

  You can use the system update readiness tool and check if this helps solve the problem.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  If you are always faced with the question, then I recommend that you post your question in the Microsoft Fix it Center for further assistance.

  Hope this information is useful.

• Desktop SMS and Windows Mail are not working together

  Hello

  thought I'd post here here as having a few issues with my Windows Mail but my desktop computer suffers the same problems and on a Vista forum where I posted my problem a few very useful told me who to try to solve the problems.

  One of them suddenly realized I had said my laptop is a Toshiba, and apparently the Desktop SMS and Windows Mail are not working together so that the person suggested unless I use it to uninstall apparently amongst the technically trained its known that these two programs do not like each other and explain why my office is not the problem but the laptop don't.

  After you have reset the Touch of Windows Mail (tutorial on a site http://www.vistax64.com/tutorials/ vista) wood don't be put off by vistax64 as site 32 and 64 and followed great reset Windows Mail from Brink (do not restore all mail) then uninstalled Desktop SMS and touch of the drink no more mail questions that gave me problems almost every day with marking than reading/sending project messages.

  So had to click forward then remove those bits and complete the email to send and touch wood since doing these two things as soon as send an email to the box shipment or project to obtain the number of emails in parentheses, whereas before it wouldn't happen unless I closed the program and then reopened.

  Hoping that these solutions have solved my problem and wanted to share it with someone else who wants to read this thread and you recommend Vista 64 because they are all very useful there and speak in non-technical terms for those of us not technically trained.

  Debbie

  Thanks for this piece of information. Should be useful for some of us.

• Windows theme does not work (Windows Ultimate), there is no desktop image and photo does not evolve

  Windows theme does not work (Windows Ultimate), there is no desktop image and photo does not evolve, is one knows how to fix this problem

  Hello

  Your Windows passes genuine validation? If your activation session has expired and that windows did not pass the validation, it will not show any visual effect such as background noise, themes etc. It will only show a black screen and at the bottom right of the screen you can see attention.
  Cihan

• My Acer Aspire V - 123 Windows 8 keeps freezing and some keys on the keyboard are not working

  I'm currently using a netbook ACER ASPIRE V - 123 with Windows 8 as its operating system and it is not yet updated to 8.1.

  At first when my computer laptop while boots 'seems' to agree, and whenever I try to open a file without any content it took me about 30-45 seconds, opening a program would take me almost 45 seconds to a minute, and I think that something is not right with my laptop and when I try to open a website via my web browser and my laptop would just FREEZE and I can't do anything about it , but I hate to do HARD reset. And to add to this unfortunate scenario is that some of the keys on my keyboard are not working the letters like R, T, I, O and backspace and many others (which I don't remember exactly one by one).

  I try to read some forums on different sites and some posts to the community of MS and did several tests like starting in SAFE MODE w / NETWORKING and downloaded the software like MALWAREBYTES to find potential infections, but nothing found. I also did the start-up in MINIMAL MODE, but again, the situation was the same, but when I'm the boot without failure the filling and freezing are only decrease and I don't want always starts in mode safe.

  From now my laptop is booting in a start-up in MINIMAL MODE and I don't know what to do next, what to try next. I hope someone could lead me to the solution to this problem, I would be eternally GRATEFUL.

  Please do help me in a step by step process and if possible please guide me with pictures or screenshots because I prefer to learn things when I Visual effects on what to do.

  Thanks for patiently reading this post.

  -Raphael

  Hi Ben,

  Sorry for the late reply, the laptop has been fixed, it seems to be a hardware problem. We disconnected the connection of the keyboard to the laptop right now I use an external keyboard to type. Cannot afford now to buy and replace my laptop keyboard, the graphics card Driver has been updated also and I've reformatted the OS

  The gel did not appear more in the normal boot and if all goes well for work this way for good.

  Thanks for the information you have shared to me, he has also been a great help.

  until next time Ben!

  Best regards

  Raphael

• My crashing after windows loading and I have this message - this device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Hello

  Have you tried to update the drivers as suggested by Basith M?
  
  Method 1:
  You can run the fix provided in the link and check out them.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/GP/hardware_device_problems

  
  Method 2:
  You can also try the procedure described in the link to troubleshoot driver issues.
  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
  
  See also the proposal contained in the link and check.
  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/kb/932520/en-us

• Discs Blu - Ray are not more recognized in Windows 7

  Hello

  I have 2 laptops with internal blu - ray, who never stopped recognizing Blu - Ray discs. I live in the United Kingdom

  A Blu - Ray drive is an Optiarc, the other a LG - PC with the Optiarc has Win 7 64 bit Ultimate and the brand-new PC with the LG drive has Win 7 64-bit Home Premium edition. Both drives are listed in the compatibility list - and were shipped preloaded with Win7.

  They both played Blu - Ray discs in the past, but it is even more recognize them in the drive.

  I ran Diagnostics from CD/DVD drive suggested in other similar topics, but the reader does not recognize the disks, it cannot solve the problem.

  I uninstalled and reinstalled several times readers in Device Manager.

  I also tried the fix involving the upper and lower filter removal in a registry key, also without success.

  I tried to change AHCPI to AHT in my bios - my bios has no AHT, just AHCPI and IDE

  I've installed, uninstalled, and reinstalled several different Blu - Ray software Acer Arcade, PowerDVD, TMT MediaTheatre Total, Slysoft AnyDVD HD and others. None no longer works.

  I even restored the two default factory machines and reloaded drivers manufacturer - no luck.

  The manufacturer, Acer, has even replaced one of the machines - when he arrived, he played all my blu - ray discs. After only a couple of windows update, it doesn't even recognize the discs.

  As you can imagine, I am at a loss on how to fix it.

  I noticed that the driver is installed when the hardware is detected is a Microsoft driver since 1996 - would this work with Blu Rays? No disc manufacturer provides a different driver, and update driver is the correct driver.

  The compatibility list says that Blu - Ray discs should work with the default drivers installed

  I'm quite proficient with PC hardware, after fixing computers for 21 years, but this question has me - and thousands like me on the web - absolutely perplexed. It seems to affect any player Blu Ray with Win 7 installed.

  Please can you help me

  Thanks in advance,

  SoC

  Hello

  Be sure to communicate with decision-makers readers as it is a known problem if it occurs regularly
  with Windows 7. Also keep in touch with Acer for the same reasons - is planning to ask ALL those
  for updates of the firmware.

  Is it possible that you install the same software on the two computer such as antivirus/antispyware.
  security programs or even a CD/DVD player and burn programs or others that may be causing
  the problem?

  If you are sure that it's an update, you can try to remove the update or even re - install Windows 7 and
  block the installation of updates so you can enable them one at a time.

  If you get it working brand a Restore Point immediately make one before installing a
  programs (before each major) and before you add updates.

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  How to uninstall a Windows Update in Windows 7
  http://www.SevenForums.com/tutorials/24373-Windows-update-uninstall-update.html

  How to hide or restore the updates of Windows hidden in Windows 7
  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  ===============================================================

  Perhaps a repair install might help:

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  ===============================================================

  You've done most of them however this is my usual convenience store just in case.

  The DVD player does not work after I installed Windows 7 - here are the different readers from Sony
  However the same issue could have an impact on your drive.
  http://support.Microsoft.com/kb/975270/

  -----------------------------------------------------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HP Pavilion G6-1008TU some keys on the keyboard are not working

  I use HP Pavilion G6-1008TU with Windows 7 64 bit from 4 years. Suddenly some of the keys on my keyboard are not working, sometimes these keys does not write the characters or sometimes write several characters. I reinstalled the operating system and have also installed antiviurs. External USB keyboard works correctly. I also cleaned the computer laptop everything.

  According to the message that you have recently published, I want to confirm that it is a hardware issue and I strongly recommend you to Contact HP Technical Support immediately by phone for further assistance without delay to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  Alternatively, you can check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you
  K N R K
  I work on behalf of HP

• Error of USB host - peripheral controller is not working properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title - USB - IF xHCI USB Host Controller

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  I have a permanent error on my computer and when I run the troubleshooter I get the above message.  It says Windows cannot load the driver.

  Hello

  USB devices remove all you can - restart the computer - is still there, the error? If it isn't
  It is related to one of the add-in devices that you removed. If she is still there, then, the question is
  either a device internal who can not remove or physically with the USB bus itself.
  If it was not there, add devices at a time until it is displayed - keep in mind that it is
  possible that there are two (or more) devices in conflict over the issue. Once you
  identified the check of the aircraft with the help of the manufacturer.

  1. to find the control panel - device - device - right-click on it - uninstall - Manager then
  Restart the computer to see if it clears.

  2. same place - double click on the device - driver tab - driver update - to see if that helps.

  3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
  online documentation and drivers, diagnostics and ask questions in their forums on all known
  questions. Update the Bios and chipset or other USB drivers.

  =====================================

  If necessary, we will use these additional troubleshooting methods:

  How to fix Code 31 errors
  http://pcsupport.about.com/od/findbyerrormessage/a/code-31-error.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• my modem STC (Saudi Arabia) SAGEM 007 has 4 ethernet ports. two of them do not work. (in red)

  my modem STC (Saudi Arabia) SAGEM 007 has 4 ethernet ports. two of them do not work. (in red)

  Hello

  You should check with the help of the manufacturer modem and if it is provided by your ISP support.

  Not really a Windows problem.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Microsoft expression are not work says cannot load ftpsrvutl.dll

  Microsoft expression are not work says cannot load ftpsrvutl.dll

  Hello

  Microsoft Expression is not supported on responses to check with Experts of these resources.

  Microsoft Expression
  http://www.Microsoft.com/expression/

  Microsoft Expression - community
  http://www.Microsoft.com/expression/community/

  Microsoft Expression - Forums
  http://social.msdn.Microsoft.com/forums/en-us/category/expression/

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Internet, printers, and other devices does not work after recent windows upgrade

  After a recent windows update automatic, I can't get online, print or use other network devices.  The unit of the internet connects very well and both Mozilla and Internet Explorer from fine, but cannot 'find' network.  The printer driver is installed, but the programs can not find the driver.

  Hello

  1. have you made changes on the computer recently?

  Method 1.
  If you use a connection please check the internet connection by cable if you face the same problem when working in mode safe mode with networking.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Vista Advanced Boot Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to boot mode safe mode of Windows Vistsa with networking.
  e. when Windows starts, use check and Internet explore if the problem persists.

  For more information, see the articles below.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode

  If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  Method 2.
  Also I would ask you to put all the drivers of material from the manufacturer's Web site and check.
  For more information, see the articles below.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  I hope this helps.

• Error: This device does not work properly because Windows cannot load the...

  I get this error message "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) "via a wired connection. And that's the Microsoft 6to4 adapt #7 and the same card but the #4 one.  Are these drivers or another file that I could use DL?

  Hi JasonBedgood,

  1. Once you get the error message?
  2. did you of recent changes on the computer?

  This error occurs if the required driver is not installed or the driver is damaged.

  I suggest that you update the driver for the device and check.

  How can I update the driver for network card on the computer

  1. click on Start, click Control Panel, and then double-click System.
  2. click the tab hardware , and then click Device Manager.
  NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click continue.
  3. click on network adapters to expand.
  4. under network adapters, double-click the entry for Microsoft 6to4and then click driver .
  5. click on Update driver software.
  6. follow the Wizard update software driver to update the driver for NICs .

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the device driver update did not help then check the link below for one of the thread with the question and try the steps mentioned by Lionel Chen on January 9, 2008
  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• All of a sudden my system aero theme does not work!

  All of a sudden my system aero theme does not work! Before that it worked. But it doesn't now. What should do?

  Original title: aero theme!

  Open the Aero Troubleshooter by clicking the start , and then clicking Control Panel. In the search box, typeTroubleshooter, click on resolution of problems and then, under appearance and personalization, click Display Aero desktop effects.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

• Multitouch gestures do not work on my Windows 7.

  I have a laptop Toshiba Satellite C655D-S5086 with Windows 7 Home Premium, and for some reason, multitouch gestures are not activated, as if they were when I bought it. I do not see in the settings of the activation object, so could someone please tell/show me how to fix it?

  Hi William,.

  Thank you to contact Microsoft Community and we will be happy to help you with your concern.

  According to the description, it seems that you are facing a problem during execution of multi touch on your computer.

  It would be great if you could answer this question in order to help you further.

  Have you made changes on the computer before this problem?

  This problem occurs because of touch settings or driver issue, I suggest trying the following methods and check if it helps.

   

  Method 1:

  I suggest you to check the mouse settings.

  Open Pen and Touch by pressing the Start button and then tapping Control Panel. In the search box, type touch penand then, in the list of results, on Pen and Touch.

   

  Method 2:

  I suggest you install the latest drivers and check if it helps.

  Satellite C655D-S5086: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2769586&rpn=PSC16U&modelFilter=C655D-S5086&selCategory=2756709&selFamily=1073768663

  See the following Microsoft article and check.

  Using touch gestures: http://windows.microsoft.com/en-us/windows7/using-touch-gestures
  
  Method 3:

  If the problem persists, then I suggest you to uninstall and reinstall the drivers.

  Update a hardware driver that is not working properly: http://Windows.Microsoft.com/en-US/Windows7/Update-a-Driver-for-Hardware-that-isn ' t-work properly

  Uninstall or reinstall a device: http://technet.microsoft.com/en-us/library/cc725782.aspx

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.