My Toshiba laptop error: No. Bootable device-insert boot disk and press any key.

When I put the bootable disc in I lost all my data. Now the problem is that I have a disk of Home Premium Windows 7 64 bit with product key number. This drive doesn't have SP1 on it, and when I tried to load the disc the message was that he could not install this drive.  This hardware of computers may not support booting to this disk.  Make sure that the drive controller is enabled in the Bios of the computer.  (I don't have the original software provided with the purchased used laptop computer).

I called Toshiba and they said I needed a new drive and it would install for $149.00. I did not pursue it.

Is my question there a way to get a Microsoft update disc that includes the original as well as the Service Pak data? I see several option on the web site but do not know what I can do.  It seems to me that everything I need is the service pak but cannot load the original software. Is there something in the BIOS I can change?

Or is there another solution without buying all new software.

Thank you

Pickle, farmer

Your PC Toshiba laptop includes a manufacturer recovery partition, and unless you have screwed up the hard drive, it should still be there and accessible...

That's how access you... For Toshiba, press and hold the "0" BEFORE and during power-up Need you options recovery and overall the machine back exactly as it was when you bought it first.

Several updates and hours later, you would still have a working machine. After re-installing your programs preferred and your applications, you must use the data backups made to recover what you have done on the machine since...

It takes a lot of time, but it all works.

An alternative...

You can download a Windows 7 ISO, Windows 7 downloads , create a boot from it and pure media install Windows. The only catch here is that you must be able to read the sticker COST on the machine, the version of Windows and the key code. Then you re - install your favorite programs and do data backup procedure as above.

If you have no backups of data or copies elsewhere and your Windows does not start, you need to make the drive of the machine, connect to another and copy the important of her data files, then place the player to the original host, using one of the methods above to re - install Windows...

Tags: Windows

Similar Questions

  • Try to install Windows 7 via USB, El Capitan, Macbook Pro 2011 but get this error "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

    I am trying to install Windows 7 via USB, (El Capitan, Macbook Pro - early 2011), but this mistake "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

    You cannot use a USB on Mac 2011 Installer. Please burn the ISO on a physical DVD Windows (a DVD - R Carbon SL on the rate of burning slower is better) and use it to install Windows. The file Info.plist changes only allowing the creation of USB, but does not fully support a USB Installation.

  • Is "PXE - MOF: PXE ROM. exit" then below I don't get, "No Bootable Device - Insert Boot Disk and press any key any" why?

    I bought the lifetime windows, defender security system, I also downloaded the windows repair and ran it, I even cleaned my c drive and defragmented, but I always get the same black screen. This is what it looks like.

    PXE - MOF: Exit PXE ROM.

    No boot device - insert boot disk and press any key

    /} In this area here, I slash turns clockwise

    Does anyone know how planned it and most importantly, how to prevent?

    Try to change your startup settings for...

    1 CD-ROM
    2 USB
    3. HARD DRIVE
    4. (if available) floppy drive
    5 LAN.
    You can change it by pressing the button shown next to "Boot Order"

  • PXE - e61: media test failure, check cable__pxe-m0f: exit pxe rom__no bootable device - insert boot disk and press any key

    My boyfriend knocked over a glass of soda on my laptop and it had the same error message for always, I'm not terribly computer savy, but 'shop' means they want 200-275 to fix! Help!

    It would seem that you have a hardware problem, caused by the spilled liquid.

    Hardware issues are beyond the scope of these Forums.

    I suggest that you take it to a reputable repair shop, computer room.

    See you soon.

    Mick Murphy - Microsoft partner

  • How to fix error of bootcamp: no boot device - insert boot disk and press any key

    When I try to install windows using bootcamp No. bootable device - insert boot disk and press any key any that appears at the start of the installation of windows 10. any solution please.

    Thank you

    What is the year/model of your Mac?

  • Windows 7 when I turn the laptop it says check cable connection pxe - mof: outgoing intel pxe rom no boot device insert boot disk and press any key

    Windows 7 when I turn the laptop it says check cable connection pxe - mof: outgoing intel pxe rom no boot device insert boot disk and press any key

    Hello

     

    1. What is the brand and model of the laptop?

    2 have you made any changes to the computer before the show?

     

    Method 1:  Change the boot order in the BIOS settings:

    See the following steps:

    Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    (a) start on typing Dungeon either F1, F2, F10, Esc, or DEL to enter the BIOS Setup.

    Warning: some manufacturers use F10 for recovery of the system.

    (b) glance to "Drive Configuration", "Boot order" or similar

    (c) check the second drive the first boot device CD/DVD and hard drive.

    (d) to save the settings and exit.

     

    Method 2:

    Step 1: Trying to boot into safe mode and see if that helps.

    Start your computer in safe mode:

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    If step 1 work, try step 2

    Step 2:  A clean boot to check if startup item or services to third-party application is causing this issue.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

    http://support.Microsoft.com/kb/929135

    Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.

  • Pavilion dv6 - 7095ca: no boot device - insert boot disk and press any key


    Thanks for your help and please excuse my bad English.
    Please check item 7, if you're in a hurry. This is the point with my Pavilion DV6 - 7095-CA:

    (1) the operating system is Windows 7 Home Premium (64 bit), the provided original with my 7095CA Pavilion, more updates HP until 2013, and all Windows updates until July 2015.

    (2) now I can't access the operating system and I have no interface UEFI. I can see that I press F2 at startup, just a test simple disk in BIOS f.0Une (the test shows that the disc is OK)

    (3) return in 2013 it took a drive failure. I did replace the disk and reinstall original Win7, all updates, including the HPS, win7 updates and all my personal software.

    (4) at this time, I bought a spare hard drive and did a complete copy of the disc using Partition Wizard bootable cd. The second disc has been tested and worked perfectly, with all of my personal software on this subject.

    So I have 2 HDs identical with the same system on both drives, fully working and tested.

    (5) a few days ago I came across the HP website and made a few updates, including the BIOS f.0Une (the last BIOS update, was of course).

    (6) after BIOS update ran, I received the message "no boot device - insert boot disk and press any key".

    (7) I couldn't solve the problem, so I did remove the hard drive and install my backup drive, which lay in a dry place without danger from 2013.

    (8) I turned on the computer and got the same message "No boot device - insert boot disk and press any key", and I couldn't find any way to solve this problem.

    Now I'm doing a new installation on a third HD everything works very well, so far, in the new facility and I will never buy HP again.

  • I screwed up trying to install windows on my computer 10 and I XE off installer and now its says "no boot device - insert boot disk and press any key".

    I was just trying to download 10 on my computer windows using boot camp assistant. I answered the questions for windows when you need to respond as what kind of language you use and then I messed up on one of the questions. I didn't know how to go back so I just pressed the red x. When I did that he must get off my computer and when it's done I got a black screen and then it says "No boot device - insert boot disk and press any key" I don't know what he meant by no bootable disk and I was hoping that you guys can help me fix.

    If stop you your Mac and your power it back up and hold down the Alt/Option key, you see a Windows selection? If so try to select and see if the installation will continue.

  • No boot device - insert boot disk and press any key

    Hello

    I was with boot camp to install 10 Windows from a usb key. The first problem I encountered was an error message stating that Windows supports software could not be downloaded on my flash drive. I read that the necessary drivers could be installed later so I unchecked the box. The part of the installation, then training camp as it should (create a partition etc.)

    However, when the Mac went to restart and (probably) to start the program installation of Windows, the error message "No boot device - insert boot disk and press any key" displayed. My problem is the wireless keyboard does not respond and the light on this issue seems to suggest that it is not connected. My guess is that the drivers needed, such as Bluetooth are not there.

    I'd be happy enough to restart OS x and forget all about Windows, but I can't see how to get around this problem?

    A wired keyboard could work?

    any help is appreciated!

    Thanks in advance

    Max.

    A wired keyboard and mouse will work. If you try to install Windows and tried to download the Windows software on a wireless network, try a wired connection. to rebuild your USB Installer.

  • G72 Pavilion. : no boot device. Insert the disk and press any key

    My hard drive died recently. I installed a new. Now I'm gettig no boot device - insert boot disk and press any key. What should I do to fix this?

    Hello

    If you find your recovery DVD, you can use them to reinstall the operating system on the new drive - this is described in the document of HP here.

    If you do not, you can order a replacement set by starting at the link below-, the cost can vary a bit depending on where you live, but they are generally inexpensive.

    Order HP recovery disks.

    If you have a problem with this link, try to order them directly from HP.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    Kind regards

    DP - K

  • Satellite L300D-222: "insert the boot disk and press any key".

    Hello

    My laptop froze this morning and so I stopped it when restarting it however, I received the message "No boot device - insert boot disk and press any key", what it means?

    I didn't not get discs with the laptop, or have I made the recovery discs. The instruction manual says to press f8 when I restart and go to "menu of advanced start", but it doesn't matter. Where should I go from here, is there a program I can download that would have this disc? All my work on the computer will be lost?

    Thanks in advance for any help!

    Hello

    He looks at the HARD drive died and so the laptop can not boot from the HARD drive but request disk bootable.
    But to be sure, you need to access the BIOS (press F2) and check if the HARD drive is recognized in the BIOS.
    If it s not recognized, then you need a new HARD drive.

    The recovery disc can be ordered here:
    https://backupmedia.Toshiba.EU/landing.aspx

    Good bye

  • Satellite L750D boot issue no boot device - insert boot disk and press key nay

    Hi all!

    I just bought a brand new model of l7501N0 real satellite. I turn it on and "No. bootable device-insert boot disk and press nay button" I tried 3 discs of BONE, nothing. I also connected to the internet, nothing.
    Is is fundamentally flawed?
    Thanks for the replies!

    Please, enter the BIOS settings and set its default value. After this try to restart your laptop.

    The same result again?

  • no boot found device, insert the boot disk and press any key

    Hello, recently tried to install Windows 10 through the Assistant Boot Camp, with the help of a DVD I bought windows. But I get an error saying "no devices found Boot insert boot disk and press a key" I tried to read and do all the patches, all offer and yet no results. Any suggestions or corrections us would be great!

    MacBook Pro mid 2012

    -i7

    Evo - Samsung 500GB SSD

    -Ram 16

    -Latest version of Mac OS x

    -L' use of 64 GB PNY flash drive

    Your Mac 2012 supported creating a USB Installer to help BC Assistant. Do not use a DVD, a USB Flash drive. Your USB drive must be a USB2 flash drive, if you choose the USB mode and you will need a Windows ISO.

    See also create an ISO image for Windows - Apple Support installation media Boot Camp .

  • Acer Aspire E1 471 does not start. "no boot device, insert the boot disk and press any key".

    Acer Aspire E1 471. 8 64-bit Windows.

    It does not seem to recognize any boot device.

    Already tried:

    -F2 for configuration of the bios F9 to restore the default settings, F10 to save and exit and restart.

    -boot from usb, dvd... the screen turns black after the screening.

    -forcing safe mode or windows recovery screen (System Restore, auto repair, cmd, etc) the screen goes black, too and after about 20 minutes. the blue screen with the unhappy face appears (pc must be restarted)

    Any suggestions?

    Hi FerminSampo,

    We will try to repair the startup entries, I suggest you follow these steps and try to solve the problem of Windows 8 start.

    a. starting from hirens CD.

    b. try these commands from the command prompt.

    Bootrec /fixmbr

    Bootrec /fixboot

    Bootrec /rebuildbcd

    c. restart the computer and check if the problem persists.

  • Re: Satellite L350: media test failure - no bootable device insert boot disk

    I just started a new Sat L350 upward and I can not go beyond the second page that says; Media test failure and no boot device, insert the boot disk and press any key.

    I have no disc and I'm stuck,

    Help!

    Hello

    This error message appears because the BIOS didn't not find a bootable device containing an operating system.

    What of the HARD drive? Is it recognized by the BIOS?
    Check in the BIOS settings; Press ESC and F1 to access the BIOS.
    There, you should check if the HARD drive (all details of the HARD drive should appear) is recognized.
    If this isn't the case, then it means that your HARD drive is dead and so you cannot boot from the HARD drive.

Maybe you are looking for

  • FireFox won't let me not do right click to change the bookmark names

    I recently bought a new computer and downloaded FireFox. When you add my favorite sites to my bookmark, the names are added automatically. They are too long, and I want to change them, but FF is not letting me do a right click to change the name. Whe

  • iPad in Apple TV not work - can hear Bo only.

    HHaving trouble getting the iPad to mirror to Apple TV. Can see Apple TV but no mirroring button. Any ideas?

  • HP Color LaserJet CP4025 - just not online

    Exactly what happens to our printer, but not even a year and now the printer will not come online. I have unplugged and restarted. Start-up screen LCD/LED lights do not blink or turn it on, but looks like its going through the boot process. The netwo

  • How to play a sound file before you exit an application?

    Hey guys, I'm a newbie. I need dev an app it will play a sound file(mp3 perhaps) before release the app that my code is as follows: playAudio(); UiApplication.getUiApplication().invokeLater(new Runnable() { public void run() { close(); } }, 500, fals

  • Registration of Smartphone WiFi blackBerry

    Hello world I use my BB9930 connected to my WiFi router at home and it works fine. I am pleased that my long WPA code is stored in my camera. I don't have to re-register whenever I'm back home. Ok. My query is: is there a limit to the number of such