My touch screen has a problem after downloading the IOS 9.0.2. Already try apple advises the steps. But the problem still occur. Already done restart of strength. Factory setting Reset also possible. But still the same problem. Can only be used at one min

Hello!!!

IM Apple Fan.

Purchased IM Ipad2, Ipad4, Iphone6

Last month I already buy s Iphone6 +.

Today I feel unhappy

MY IPHONE 6 'history '.

My touch screen has a problem after downloading the IOS 9.0.2.

Already called and try apple advises the steps. But the problem still occur.

Already done restart of strength. Factory setting Reset also possible. But still the same problem.

Only can be used for a minute. After that... The problem comes in again & again & again...

APPLE.COM

Can U help me

Only products of Apple of love before updating the version 9.0.2

iOS 9.0.2 happened some time. The last iOS is iOS 9.2. If you have not updated, updated. If you restored to the factory, it must have downloaded iOS 9.2. Also, if you restore to the factory and the problem is still there, then you must make an appointment at the Genius Bar to the nearest Apple store or Apple authorized service provider or call the Apple Support to have the device examined by Apple. There seems to be something wrong with the screen.

Tags: iPhone

Similar Questions

  • G72-a20EM screen has stopped working after updating the BIOS F.48.

    How is it possible that BIOS update recommended could turn off the LCD screen.

    Currently I see almost anything on the screen, but vga port works. But increasingly,.

    Intel graphics card is not recognized.

    G72-a20EM screen has stopped working after updating the BIOS F.48.

    What can I do to fix that?

    Good news!

    I found the working version, and it is version F.08.

    Supposedly new version have different Active cables, and this is the reason why the screen is dark.

    So, case closed, everything is perfect.

  • After downloading the updates, I can't reboot my pc, so now I can't receive updates.

    After downloading the updates, I can't reboot my pc. I code pops up that says that if I end now that I'm going to lose all unsaved data. So, I can't log out or restart without losing my updates. I can't get my active X to work now... I can't download it because it requires a reboot. Help!

    Hi stevenstar,.

    a. you just download the updates of Windows or you have installed them as well?

    1. at this point of time you can cancel the reboot and back up all your data and close all applications that are open and restart the computer to make the changes.
    Once the computer restarts view the Windows update history and check if updates are installed.
    See the Windows updates are installed
    http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed
     
     
    2 type eventvwr.msc/s in the address bar.

    The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.
     
    For more information on event viewer, see the articles below:
    Open event viewer
    http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
    What are the information contained in the logs of the event (Event Viewer)?
    http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
     
     
    We hope to hear from you soon.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • After downloading the program, I can't install them. Error: 'path is not a valid Win32 application ".

    After downloading the programs I can't install them

    Hello

    1. which site Web you downloaded the program from?
    2. you use a download manager to download the program?
    3. what web browser do you use?
    4. don't you make changes on the computer before the show?
    5. were you able to install other programs on the computer?
    6. what program are you trying to install?


    Method 1:
    You can try the steps in the article of the supplied knowledge base and check.
    How to solve problems when you install or uninstall programs on a Windows computer
    http://support.Microsoft.com/kb/2438651

    Method 2:
    You can also perform a clean boot, and then try to install the program and check.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

    Method 3:
    You can run Microsoft Safety Scanner in Mode safe mode with network and check.
    Check out the link:
    http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode 

    You can run a Microsoft security scanner to make sure that the computer is free from virus infection:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
    WARNING:
    If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.
  • My HP Envy touch screen has stopped working after an update of the HP Bios yesterday

    Can someone tell me please how to fix my touch screen. I got an HP BIOS update which caused my touch screen to stop working. I tried to re - calibrate the it, but it does not accept my contact telling me that the screen is no longer enabled.

    I tried to find where to turn them on and couldn't find where to enable touch of the finger. I also tried looking for driver updates and driver seems to be up-to-date.

    Thank you

    I have another type of TouchSmart, but this may work for you:

    1. Press Windows + X logo (if you are using a Windows computer 8 - If Windows 7, click the Start button, type Device Manager and click on Device Manager in the results of research).
    2. Select Device Manager from the list.
    3. Click on the small arrow next to Interface devices to expand the list.
    4. Click the touchscreen driver (in my case, Voltron NextWindow touch screen).
    5. Right click and select Activate from the list.
    6. Click Yes if a dialog box asks if you are sure you want to activate the touch screen driver.

    On some models, it is unclear which device in the checklist of the touch screen. I read in other posts that some people have solved the problem by disabling and then re-enabling each device.

    If this does not work, you could try to go to hp.com (http://www8.hp.com/us/en/support-drivers.html) and click on driver downloads &.
    In the search field, enter your product name or number, and then click OK. Select your operating system from the drop down list under Select your operating system, and then click Next. If there is no graphic driver available under Select a download below, click on the plus sign next to the driver - graphics, and then click the name of the driver. In the information and download options window, click Download. Follow the instructions on the screen to download the driver. Restart the computer.

  • Touch screen no longer works after update to IOS 9.3.1

    MY touch screen of my iphone + 6a stopped working after the update to IOS 9.3.1. I tried force closed all day and it made no difference. does anyone know how to fix this?

    I have exactly the same problem with the same Iphone with IOS 9.3.1 + 6

    The only way I can get to work again for a light moment is to reset the Iphone now deep-set buttons home and power together until it restarts.

    It works for a short period of time, and then it freezes again.

    Started to occur immediately after the update restarted the phone.

  • Thunderbird download the same message, off guard popstate.dat antivirus, renamed to old, still have the problem. Ready to upgrade to Outlook or another prog to mail.

    Read about other similar problems in the forum, tried the possible one - Disabled popstate.dat antivirus solution, renamed popstateold.dat, TB closed, reopened to he downloaded e-mails until the more recent with the problem and still trying to download it again and again. Can't download at the end, as refreshment shows always the same amount still on the server to download, even after downloading the same message several times. This has happened several times in the past months, with several duplicates, but not this loop continues. This is the second time in a week where this has happened. My first attempt to fix - I copied all the .msf files to the new location and uninstalled TB. Then reinstalled and back .msf files. He seemed to be ok for a few days, but now have the same issue. All windows updates to date, was updated to the most recent version of TB before it happens.

    Try to connect to your account via webmail and delete the problematic message.

  • Mac Mavericks. Camera raw 9.1. Camera Nikon D810. How to set the default settings of the camera profile standard (now available after downloading the camera profile and copy it into the appropriate file)? Is it possible to apply also in the pictures showe

    Oops... did not write the question where I... How to set the default settings of the camera profile standard (now available after downloading the camera profile and copy it into the appropriate file)? Is it possible to apply too in images showed in the bridge? I'm a newbie in the forums and I'm not sure how to proceed.

    You can right click and copy the settings on an image that has the right profile. Then highlight all the images that you want to edit, right click and paste the settings. On the list that is displayed, simply choose the camera calibration.

  • Is possible to create a lot of email account on the same computer can affect the performance of the computer or something else?

    Is possible to create a lot of email account on the same computer can affect the performance of the computer or something else?

    Sheman salvation,

    What do you mean by "creates a lot of e-mail account on the same computer?

    I mean after connect hotmail.com let's say, after uttering the 1st email account, so I create another and one more, etc...  can affect the performance of the computer or something else?

    I know that with 1 or 2 email account is sufficient, but I just want to know by I have

    can affect the performance of the computer or something else?

    stuckfree,
    Who is 'Sheman?

    What about your further explanation - it can affect the performance of the computer?

    Together?  Only if you're so low disk space (almost out - the figure even single or double megabytes (MB) area) that everything is affected.  Otherwise - the only performance can affect the messaging application, you use as it POP3, IMAP, Exchange, etc. connects to different e-mail providers at the same time, you need to get your e-mail.  I have three to five settings of accounts on each of my systems (or accounts Hotmail, Gmail, or accounts, corporate, local accounts or accounts ISP, etc.) in Microsoft Outlook and don't encounter any problem.

  • in Outlook Express, how can I send the same message to a group important (in the address book already), but have to each recipient can only see his name (not the Group)

    In Outlook Express, how can I send the same message to the large group (already in the address book), but have to each recipient can only see his name (not the Group)?

    To use the functionality of the BCC (Blind Carbon Copy), in a new message window, click View | All headers and type the addresses separated by a; Or: Click the button to. You will see your list of contacts and the choice to put them in the To, CC, or BCC field. Click on an address, and then click BCC to add it. Repeat for all of the contacts you want. (Note: most of the providers have limits as to how many messages you can send both a. 25 is common, but it varies).

    Put your own address in the box to. That's the only name/address that any recipient will see. If you leave the field empty, some people may not receive e-mail because of message rules they put in place, or restrictions imposed by their ISP.

    You can also make an entry in the address book using your e-mail address, but put something like the mailing list in the area of the display.

    *********************

    You can also create groups if you send e-mail to the same people often.

    To create a group of contacts:

    You can create a single group name (or alias) to use when sending a message to several contacts at the same time. Just create a group name and add individual contacts to the group. Then just type the name of the group in the box for when you send mail.

    1. in the address book, select the folder in which you want to create a group. Click New in the toolbar, and then click New Group.
    2. the Properties dialog box opens. In the group name box, type the name of the group.
    3. There are several ways to add people to the Group:
    a. to add a person from your address book list, click Select members, and then click a name in the address book list.
    (b) to add a person directly to the group without adding the name to your address book, type the person's name and e-mail address at the bottom of the Properties dialog box and then click Add.
    to add a person to both the Group and your address book, click New Contact and enter the appropriate information.
    (d) to use a directory service, click Select members, and then click search. Select a directory service in the drop-down list at the end of the text box. After finding and selecting an address, it is automatically added to your address book.
    4. Repeat for each addition until your group is defined.

    Note

    a. to view a list of your groups separately from the list of address book in the address book on the view menu, make sure that folders and groups is selected.
     
    b. you can create multiple groups, and contacts can belong to several groups.

    If you want to send to a group without addresses are displayed for each recipient, open the address book and make a new entry. Enter the name of the group in the area of the display, but use your address. (Some Internet service providers require a legitimate address in the line to and recipients will know it's from the Group).

    Click on the button to. Enter the name of the group using your address. Enter the group in the BCC field.

  • The touch screen does not work after a reset.

    Original title: lost after factory reset touch screen

    I bought an acer aspire z1801 on the secondary market, the former owner has done a factory reset to delete personal data, but now there is no touch screen. If I look in the windows 7 Home premium, there is not a program for pen and touch, I learn that something happened when restarting a part of windows is missing? If I can add this section or I have to re install a new windows 7 on my computer, if I have to pay for the program I could go directly to the upgrade of windows 8 and that would be the missing piece?

    Thank you

    Hello

    Welcome to the Microsoft community.

    I see that contact drivers are missing on your computer.

    You can check this link to order tp download and install the drivers:

    http://support.Acer.com/us/en/product/default.aspx?modelId=3796

    Alternatively, you can contact Acer for assistance with the issue of touch, because the question has started to occur after performing a factory reset.

    Here is an article which described on 'Upgrade to Windows 8'.

    http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

    I hope this helps.

    If you need help with Windows let us know.

  • I just bought edition Creative Cloud schoolgirl and her teacher and the payment has been successful, but it seems that I can only download a free trial?

    I just bought edition Creative Cloud schoolgirl and her teacher and the payment has been successful, but it seems that I can only download a free trial for the entire application?

    And I checked the FAQ, it says that "no serial number is required for membership or subscription plan products such as Creative clouds - the student and the teacher.» Simply sign in with your Adobe ID to activate your membership. »

    However when I tried to login with my ID on Adobe Application Manager, he always says that it can't find the order and suggest me to buy a.

    I really wonder how I can work through this?

    Please see the links below.

    Also, make sure you use the right adobe ID to log in.

    Hope this will help you.

    Kind regards

    Hervé Khare

  • my touch screen does not work after you download windows 8.je have a B305 lenovo all in one PC ideas?

    my touch screen does not work after you download windows 8.je have a B305 lenovo all in one PC ideas?

    I downloaded the former driver of windows 7 touchscreen and it worked

  • I have tried to download/reinstall CS5 that my laptop current doesn't have a dvd drive, but even after downloading the files, it will not install

    I have tried to download/reinstall CS5 that my laptop current doesn't have a dvd drive, but even after downloading the files, it will not install

    When you ask a question you will need to provide some basic information

    Mac or Windows and EXACTLY what version of the operating system?

    Recent Mac AND Windows operating systems have been known to cause problems "weird."

    Using a full account of computer administrator with read/write permission?

  • Hi I would like th different creative cloud buy 2, only photoshop/lightroom one and the other with all pack.is it is possible because I saw that we can only install on 2 different computers at the same time

    Hi I would like th different creative cloud buy 2, only photoshop/lightroom one and the other with all pack.is it is possible because I saw that we can only install on 2 different computers at the same time

    Creative desktop cloud applications can be downloaded and installed on multiple computers, regardless of the operating system. However, the activation is limited to two machines per individual related to the composition, and you may not use the software on these devices simultaneously.

    You can also see:

    FAQ: Can I install Creative Cloud on several computers?

    You can either sign of Creative cloud on a computer to connect to another, or as you said, buy a membership second using an AdobeID different so that you can leave, signed at on 4 computers.

Maybe you are looking for