My touchpad lock / unlock does not work

Similar Questions

• Satelite P50-A-14F - Caps Lock key does not work

  Hi all

  My CAPS LOCK key does not work on my laptop series satellite P50-A-14F. Just realized while writing an email that does not work, so is more or less sudden. Nothing has been spilled on it. Here's what I've checked so far:

  -green light indicating that CAPS is LOCKED turn everything on by pressing the key on the keyboard of the screen
  -Keyboard backlight does not start when I press the button, but it works for the key itself when you press a button any.
  -try a clean boot but no results.

  Thanks a lot for your help.

  Hello

  > Just realized while writing an email that does not work, so is more or less sudden.

  Have you tested the button LOCKING of upper CASE using different software: Web browser, by word or any other editor?
  How about using the external keyboard?

  From my point of view, there are two possible malfunctions: either there is a problem with the software that you use or the internal keyboard works badly simply and in this case, the replacement of keyboard will solve the problem.

  You could test the external USB keyboard. In case the button LOCKING of UPPER USB external keyboard functions, then the internal keyboard needs to be replaced for sure.

• The Touchpad right button does not work on the Satellite Pro L series

  The icon in the taskbar indicates that the right button is permanently pressed, if it is not.
  So I can't right click at all. A radio mouse works fine, but there are times I want to use the touchpad.

  In addition, the screen does not turn off, and the computer goes to sleep after the hours set in the options of energy saving.
  I listen to the radio a lot and do not want to display on.

  > The icon on the task bar shows that the right button is permanently pressed, if it is not.
  > So I can't right click at all. A radio mouse works fine, but there are times I want to use the touchpad.

  This could be linked to defective button. If you cannot use the right button, and the button appears to be clicked down, then I suppose that its hardware malfunction.
  In this case it must be replaced.

  > In addition, the screen does not turn off, and the computer goes to sleep after the hours set in the options of energy saving. I listen to the radio a lot, and don t want the display on.

  Have you chosen the right power Plan? In Control Panel-> power options you have to choose the diet plan and should click: change plan settings. Here, you can change the time when the display must be disabled.
  If this does not work, then I guess that this feature does not work because you press the button of the touchpad and the windows OS think that the notebook is in use

• HP ProBook 4420 s: TouchPad disable indicator does not work

  Hi, I have a HP ProBook 4420 s-Core i5 laptop.

  My TouchPad indicator which located in the corner top left of touchpad & scroll is to the right of it, does not work after installing Windows7 operating system.

  Need to do to enable this feature?

  I desperately need to solution because I can't write anything in MS Word, Excel or etc. because, now, it is. When I write something, a part of my hand touched the pad and the cursor goes different places which creates difficulties.

  Would be grateful if you kindly give an easy solution for this.

  Thank you very much

  Thank you very much.

  Please note that my current operating system is windows 7, and is system type: 32-bit operating system.

  In this case, suggest you to install again to activate/solv my TouchPad disable indicator promlem?

  It will be good enough if you tell me, what is the problem of the current operating system.

  Also please tell me what is HP ProBook 4420 s Synaptics Touchpad Driver

  Waiting for your valuable advice.

  Thank you for you support.

• Keboard and Touchpad 355 G2: Does not work at the same time

  Hello

  I am trying to configure my laptop for games, but I can't get my touchpad and keyboard work at the same time. I tried to disable palmcheck but that did not work. Anything else I could do?

  Thank you

  Hello

  Normally, you just have to disable SmartSense or PalmCheck Control Panel of Synaptics - but from what I've seen, it seems no longer works for Windows 10 versions of this driver.

  You too, can be able to work around this problem as follows.

  First, download the Synaptics driver on the link below and save it in your downloads folder.

  Version of the Synaptics 17.0.18.8 driver

  Disable your wireless card (should be f12 ).

  Open Control Panel, open programs and features, right click on the Synaptics driver and select uninstall.

  When finished, restart the laptop.

  When windows rebooted, open your download folder and re-run the installer of Synaptics - when it is finished, restart the laptop.

  Open the Synaptics settings panel, disable SmartSense or PalmCheck , then check if the touchpad works now with a key on the keyboard is pressed.

  If so, turn on your wireless card and use the utility on the following link to prevent Windows 10 to update automatically the Synaptics driver.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

  Note: If it does not, your existing driver are here.

• G6 laptop Touchpad No Light & does not work

  Hi This is my first post

  I searched the rest of the forum before making this post and tried all the other suggestions without success

  Information System

  Laptop HP Pavilion G6

  #ABU product number A5H09EA

  Serial number 5CD14477ZK

  64-bit version of Windows 7

  Problem

  When windows starts on the touchpad light is not lit.  It is not turned on and does not turn on the use of the method 'double tap' in the upper left of the touchpad or the small circular ' indentation.

  Since it stopped working I updated the drivers for the touchpad, and no change happened

  Sometimes the 'right click' and works of drop-down list button and the menu appears, but no other function works.

  Sometimes the touchpad works for a short period, but it is "intermittent" and slow and unresponsive.

  Any help you could provide would be appreciated

  Hello

  First, download the latest installer driver Synaptics, on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp53501-54000/sp53851.exe

  Then, open windows control panel, open programs and features, right click on the entry "Synaptics Pointing Device Driver" and choose uninstall.

  When this is finished, stop the laptop.

  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Tap here to f10 as soon as you press the power button to enter the menu of the bios.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  Once done, restart the laptop.

  When windows has reloaded, see if now hold the fn key and pressing the SPACEBAR will illuminate the TouchPad.

  There are also other configurable options here.

  Kind regards

  DP - K

• Satellite L45: touchpad scroll feature does not work

  OK, I have a laptop Satellite L45 and I need help.
  The functionality of scrolling on the touchpad worked for awhile and now it will not work.

  I've looked throughout the computer and tried everything and nothing seems to work.
  I don't really know too much about computers in a first time, and no one I know can help me.

  My father had the same problem with his computer, but he says it seems to work himself.
  Mine has not yet and it drives me crazy.

  If someone could help it would be greatly appreciated.
  Thank you very much.

  Hello

  Have you checked if the touchpad scroll function has been enabled and configured correctly?
  I recommend that you check these settings before you to reinstall the driver for the touchpad.

  Do you know where to find these parameters?
  You can find it in

  + Control Panel-> mouse-> last (device settings) tab-> settings button.

  Here, you should check the * virtual scrolling *.

  Good bye

• Vista computer locked, keyboard does not work.

  A malicious person entered my Vista computer.  When switching on at the beginning of the POST keyboard doesn't let me in BIOS.  Finishing POST and past in screen of emergency repair with all the parameters of Safe Mode and start normally.  Keyboard doesn't let me choose Safe Mode.  It then goes to a different sign on the screen that is black and a small sign in box without a user name, a place to enter a password.  None of my usual passwords work.  Below the password are buttons to sign in and turn it back on.

  What I need is a back boot disk and a working key board so I can runrstrui.exe and come back on the eve of this disaster.

  I used Vista restore and rescue discs, keyboard does not press a key; have used AVG and Kaspersky rescue disks; have used the rescue system, repair Boot, UBC, Trinity Rescue Kit, Boot CD Vista PE, etc. for a total of 14 different repair or rescue disks.

  Hello

  Why tell you what a bad guy entered into your computer?

  And have you tried another keyboard?

  Something in your question, is that you say that the keyboard allow you to select the Safe Mode Options, etc., but you can type your password is not working.

  There are several methods to reinstall Vista.

  This can help you (download files and make your own DVDs):

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

  And here are instructions on how to burn ISO disk images:

  http://www.SnapFiles.com/get/isorecorder.html

  The download links and information on how to make the ISO file, and then create the Setup DVD above are at this link:

  "How to download a Vista ISO and create a Setup DVD or USB"

  http://www.Vistax64.com/tutorials/301852-Vista-ISO-download-create-installation-DVD-USB.html

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  ___________________________________

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  ___________________________________

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Them or us ask the right sequence of key.

  ___________________________________

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Video of unlocking does not work

  
  Hello
  
  I wanted to see if the release could improve the look of my video way. After some failures to incorporate it in to my existing fla, I decided to start over and follow the example of the manual.
  Here's the part I'm talking about:
  
  The example following video1.flv in the object plays video my_video and allows the user to change the behavior of the filter release on video1.flv. Add a video object named my_video and an instance of the ComboBox named deblocking_cb in your file and then add the following to your FLA file ActionScript code or YOU.
  
  var deblocking_cb:mx.controls.ComboBox;
  var my_video:Video; my_video is a Video object on the stage
  var my_nc:NetConnection = new NetConnection();
  my_nc. Connect (null);
  var my_ns:NetStream = new NetStream (my_nc);
  my_video.attachVideo (my_ns);
  my_ns. Play (" video1.flv");
  
  deblocking_cb. AddItem ({data: 0, label: 'Auto'});
  deblocking_cb. AddItem ({data: 1, label: 'No'});
  deblocking_cb. AddItem ({data: 2, label: 'Yes'});
  
  var cbListener:Object = new Object();
  cbListener.change = {function (evt,:Object)}
  my_video.deblocking = evt.target.selectedItem.data;
  };
  deblocking_cb.addEventListener ("change", cbListener);
  
  
  Use the ComboBox control instance to change the behavior of filter release on video1.flv.
  
  
  I added a ComboBox and a FLVPlayback component on the stage and named as described.
  The only things I changed ACEs are the parts in bold:
  I changed the file name for http://www.multimediamatters.nl/avproductie/commercials/NuKanHetNog.flv
  I changed the data addItem third at 5, because I'm using an On2 video.
  
  When I saw the .fla I hear the audio, but the video does not appear to be loaded in the FLAPlayback instance. It simply maintains buffer, and when I press play it says that it cannot connect to the server.
  
  It I'm probably missing something very obvious here, but can someone point me in the right direction please?
  Thanks in advance!
  
  Yours,
  Andra
  
  

  Just saw your message. You must use a video object, not the component FLVPlayback.

  Right-click in your library and select new video.
  make sure that his 'actionscript-controlled. "
  Once that its in the library to slide towards the stage and name it my_video.

  FYI, I got your flv works without problems.

• Reference Dell inspiron 7000 13, 2 in 1, auto locking keyboard does not work

  I noticed that the locking of the keyboard works only when I fold the computer in full tablet mode.

  Is it just me or is there someone with the same problem? Anyone has an idea about this?

  Yes, what happens with me too. Extremely frustrating when I pushed back screen so that the keyboard is on my lap (usually play games with a gamepad) - this means that I can push all kinds of keys and use the trackpad!

  My laptop isn't also rotates when in full tablet mode OR mode "tent"! AGH!

• BlackBerry Smartphones lock button does not work after update

  Since the last update on my Blackberry Bold 9780 the 'lock' button no longer works.  How to solve this?

  You can try without decommissioning of your BlackBerry smartphone to the previous version to test it for me?

  Plug your smart phone BlackBerry on your PC and then launch the BlackBerry Desktop Software.  Before you do anything that this, backup your device.  Then click on the device and then update.  Choose see other Versions in the pop up screen then choose 6.0.0.461 from the list.

  If you can try this when you have the opportunity, so I would like to know if the lock button works, it will be useful in the diagnosis, be it a bug of software or a physical problem with the device.  You can let me know the results.

  Thank you!

• My touchpad scroll function does not work in Firefox 4

  4 years Dell Inspiron 1520 with a Synaptics touchpad, running XP. Just downloaded FF4 last night, now discovered that my scrolling on the touchpad function no longer works. It's very irritating. If no fix is available, how to go back to the previous version of FF?

  Try running Firefox in questions to troubleshoot Firefox in Safe Mode. If it works properly in this configuration, then one of your modules is the culprit.

  By the way, I recommend you visit the Plugins check page and update your plugins. You are potentially expose your system to attack with some versions you have installed at the moment. Their update can also solve the problem with your touchpad.

  In case the previous steps do not resolve the problem for you, you can return to the previous version and secure that 3.6.16 as follows.

  1. Go to Download Firefox v3.6.16 and download it to your desktop.
  2. Then go to add/remove programs, scroll down to Mozilla Firefox and remove it, choosing to keep your bookmarks, etc., the customizations (don't tick the box).
  3. Reboot and delete the folder called Mozilla Firefox at this location: C:\Program Files\Mozilla Firefox
  4. Finally, run the downloaded installation file.

• Automatic unlocking does not work on my iMac 5 k

  Hello

  I have activated the service unlock my Mac with Apple Watch. Two-factor authentication is turned on, and I'm on macOS Sierra and look OS 3. I still need to type my password every time I log on my computer. I have to do something more in order to have auto unlock to work on my Mac?

  Hi JohanSvedala!

  I see that you are having problems with the new function Auto unlock with your Apple Watch and your Mac.  I can understand wanting to use Auto Unlock, and I'm happy to help you.  There are additional instructions for this feature in the following article:

  Automatically unlock your Mac with your Apple Watch

  Thank you for using communities of Apple Support.

  See you soon!

• My lock switch does not work

  the lock switch is on (orange are visible), but the ipod can still be used

  Try to do a Reset (reboot iPod)

  Learn how to reset your iPod - Apple Support

  If the problem persists, try the more likely cause is a faulty Hold switch.

• Pavilion g6 do you 2101: function of locking for the touchpad does not work

  My laptop touch pad lock feature does not work now. Not even the orange light comes on. Please tell me the solution.

  I have tried fn + key lock, but still no solution.

  Hello @2101tu,.

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem with the TouchPad and wanted to help you!

  First of all, try to review the following document and let me know how it goes:

  HP laptops - use and configure the TouchPad (Windows 7 and Vista)

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!