My turns Windows Vista Home off when I close the lid and custom back on unless I restart my computer wireless

I have a Toshiba laptop Windows Vista Home. Recently, every time I close my laptop lid, and try to turn it on a few minutes later, the wireless devices were disabled. When I try to reactivate it from ConfigFree on wireless network connection to activate, it said everything was active except for wireless devices. The only way I can turn it back on is by restarting my computer. It only started happening recently and for first of all, I would stay on. No idea what's wrong?

Hello

Maybe this can help.

Assuming that the signal is strong, and that there is no noise in the electrical environment (http://www.ezlan.net/wbars.html ).

Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

There may be some variations on where is the energy saving setting.

Here are a few examples, YMMV, look around your systems.

Example, http://www.ezlan.net/example/powersave.jpg

Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

Example, http://www.ezlan.net/Win7/power_save_win7.jpg

Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

----------------------------

Still a problem?

Check support for the router and make sure that your using the latest firmware for the router.

Check the support site for the manufacturer of the computer and make sure that you use the latest drivers.

If the support site has a newer version of the drivers and installed current ask drivers the most up-to-date drivers use this method.

Download the drivers and extract them to a folder of your choice.

In Device Manager, right-click on the adapter.

Click Update drivers and choose her browse my computer for drivers.

Choose let me a list of choices, click on disk and point to the folder with the drivers.

Tags: Windows

Similar Questions

  • Monitor not turns off when I close the lid!

    I have a compaq evo n1015v running windows xp pro, and when I close the lid the monitor stays on! How can I do to the monitor turns off when I close the lid?

    I have a compaq evo n1015v running windows xp pro, and when I close the lid the monitor stays on! How can I do to the monitor turns off when I close the lid?

    This is probably controlled by the power settings. Once you enter the power settings there should be an option something similar to 'change the closure of the hood '. There are probably several options such as sleeping, ect...

    You can download the manual in PDF HERE.

  • When I close the lid and open it again, my computer freezes

    Original title: back to zero problem

    I am running Windows Vista Home Premium on a laptop ACER 5570. When I close the lid and open it again, my computer freezes. Just a black screen and nothing that it will restart. I have to close it using the power button, and when I try to launch again the computer does not start upward. I need to reboot with a Vista startup disk. What is my problem?

    Have tried to take the battery out and restart, but no go.

    Hello

    I suggest you to follow these steps and check if that helps.

    Method 1:
    Try to update the latest drivers for the graphics card and check if it helps:
    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    Method 2:
    Try to perform the commissioning of repair and check if this may help:
    http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

    It will be useful.

  • After 8.1 Upgrade Windows, Lenovo Yoga 13 blocks when I close the lid and reopen

    After I opened the lid and the Tablet starts to come out of standby mode, the blue screen appears with the following error message:

    SYSTEM_THREAD_EXCEPTION_NOT_HANDLES (rtwlanu.sys)

    Any ideas what is the cause and how to fix?


  • Laptop shuts off and turns on when I close the lid

    Hi, I just bought a HP Pavilion 15-n253sv and I noticed that when I close the lid its turns off instead of getting in standby mode. Also when I stopped it, and then I close the lid it lights up. Its like the on off button. Is it a hardware problem that I must return the laptop? I checked out the settings and it is said that when the lid is closed it just goes to the standby mode. I have win 8.1.

    Hi Biliou,

    Welcome to the Forums of HP Support!

    If I understand you correctly, your computer shuts down when you close the lid, and if it is turned off and you close the lid it lights.  I think you are right to think it's a hardware problem. You can contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the link to get help from your region number. Contact HP worldwide

    I hope that this helps, please let me know how it goes.

    Thank you and have a great day!

  • Windows 8 do not sleep when I close the lid

    I just got the Elitebook 850 G1 and I put all the parameters of sleep when I close the lid and wake up when I open it. I checked the two settings in windows and in the BIOS and it's all good, but when I do actually, he does not wake up but restarts the computer instead. So when I was away typing on Word, fortunately I constantly save it but it's not back to where I left off. I thought it was one of the graphic drivers first, because he has dual graphics, intel and ati. He had a few problems with the ATI card, but I think that I fixed it. I am running windows 8.1 Pro.

    What can I do else?

    Edit:

    I tried changing the settings to hibernate instead, and what he gave me was a BSOD.  Video_dxgkrnl_fatal_error. I remember that what made the first time I tried to do it before when he was on the way 'sleep'. any suggestions?

    is not serious, I fixed it. It turns out that the new graphics driver intel was the culprit. I had to revert to a previous version. works perfectly now

  • How can I keep the laptop and find only the external monitor when I close the lid?

    Original title: external monitor

    I want to use an external monitor with my laptop Vaio Windows 8, but when I close the lid, both screens will disappear.  How to keep your computer on and display only the extgernal monitor when I close the lid?

    I want to use an external monitor with my laptop Vaio Windows 8, but when I close the lid, both screens will disappear.  How to keep your computer on and display only the extgernal monitor when I close the lid?

    Hello

    Perform the following steps.

    1. press the Windows key + X to display the System menu.

    2. Select Control Panel.

    3. Select the Power Options.

    4. in the left menu, select Choose closing the cover .

    5. look in the section of power and sleep buttons and lid settings .

    6. use the drop-down menus of the section when I close the lid , and then select do nothing for both options.

    I hope this helps.

    Concerning

  • lovely better does not work with windows vista home Premium what another program removes LSO and HOW to prevent the trackers?

    Question
    better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
    Details

    In current versions of Flash you can also do this via the control panel.

    • Control Panel > Flash Player, click on remove and erase data
  • I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve the issues___Thanks__Peter

    I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve problems

    Thank you
    Peter

    Hello

    The easiest way is with a crossover cable - a special wire to connect the two systems.
    You can get one at your local computer store - they are not expensive.

    Also check with the site of the manufacturer of your router, because they will have in-depth details on how to
    set up the network.

    ====================================

    Or you can set up a wired or wireless network.

    Setting up a network home
    http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

    Home network, wireless network and computer networking Made Easy
    http://www.home-network-help.com/

    Windows Vista tip: How to install and connect to a wireless network
    http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

    Ad-hoc networking
    http://windowshelp.Microsoft.com/Windows/en-us/help/0e158c21-4C70-4235-879d-0c9133218e561033.mspx
    Set up a computer-to-computer (ad hoc) network
    http://windowshelp.Microsoft.com/Windows/en-us/help/293c504f-b944-4d5d-835c-f080129bd5dc1033.mspx

    How to set up an Ad Hoc wireless network in Windows Vista
    http://www.home-network-help.com/ad-hoc-wireless.html

    Create an ad hoc WiFi network secure on Windows Vista
    http://www.Intel.com/support/wireless/WLAN/sb/CS-025386.htm

    Networking tutorial home
    http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
    Practically networked - everything you could possibly want to know.
    http://www.practicallynetworked.com/

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • When a close the lid of my portable computer Windows Media Player stops, and when I open it, it picks up.

    When a close the lid of my computer laptop wmp stops and when I open it, it resumes. This only happens on the battery. I have it set to not sleep, and there is no screen saver. I want to use my cell phone as an mp3 player without having to leave the lid open. is there anyway to prevent a break?

    original title: WMP stops when the lid is closed

    Open Power Options - you can do it from the control panel by typing Power Options in the start menu, or by right click on the battery icon in your system tray (right end of the taskbar.)
    Click on "change plan settings" for your current power management.  On the next page, click "Change advanced power settings".  On the box that opens, expand 'Power buttons and lid', then 'action close cover.'  Change the selection to "on battery" to the 'status quo', and then click OK.  Close the power Plan window.

    HTH,
    Chris

    MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • Why my LAN adapter off when I close the laptop?

    Why my LAN adapter off when I close the laptop?  This also occurs when the laptop sitting too long.

    Once the laptop starts up, the LAN adapter must be reset due to a "no valid IP Configuration".

    Why?  Help please!  Thank you.

    In the find top-right panel ' view by '. It is probably set to "Category" view, use the selector drop-down list to choose "small icons". This makes it easier to find for each option.

  • Satellite A200 AH3 stops instead of standby when I close the lid

    Hello

    I have a laptop Satellite A200 AH3. When I bought Windows Vista was preinstalled (I still drive recovery). When I closed the lid of the previous day (I mean the monitor turn off the HD, the cooling fan and all the rest). The light On / Off on the laptop turned to a flashing orange light.

    Then I opened the lid and Windows prompted me to the logon screen. This process occurred when the laptop starts on the battery, not when it is plugged. Everything was going fine.

    But I formatted the HD to install WIndows XP that I bought Windows vista seem to be too heavy for my laptop. So I installed Windows XP and the driver and the software available on the Toshiba site. Now when I close the lid, the Windows shut down very quickly (about5-6 seconds). However, it is a real firm. When I reopen it cover anything happen.

    Then I press the power button / stop and start Windows, normally (no screen saying that windows close annormally and no Safe Mode boot option). Even if I change the setting in the control panel/power Option or the Toshiba Power Saver, utility and I put them to sleep, he always make a stop down.

    How do I restore that?

    Hello!

    Have you downloaded the BIOS for Windows XP?
    For the Satellite A200, there are two versions available; one for XP and one for Vista.

    Also, make sure that you have the latest graphics card driver and keep your XP to date.

    Good bye

  • External screen goes blank when I close the lid Satellite P100

    Hi all.
    I hope someone has an idea as to what is happening here.

    Sometimes I like to watch a dvd or use the center of the media on my HD TV. I use Windows Vista to make it.

    When I had XP installed, I close the lid of the laptop and watch them to my heart's content. Now with Vista, I need to have the lid open be able to watch on the external display. If I close to you then the external screen is empty, as if I unplugged the laptop.

    That makes me free! What worries me is burn-in screen, because the standby screen not turn on as I am watching video.

    Help! Someone! Anyone!

    AFAIK in Vista that you can use the same options as under WXp. check please supply option and you will find an option called when I close the lid. As option, choose no action.

    I think you should be able to close the lid while watching the movie on screen.

  • Takes too long to Hibernate when I close the lid - also the noise of random device when starting

    Hello guys.

    Since I wiped the machine, I had these two problems. When I close the lid, he used to go to bed right now, but now I see the light of sleep (and the power button), flash and flash, and then he goes to sleep.

    Upon awakening, he crosses the start of lenovo screen and resumption of the windows, then it asks for a password, before I used to open the lid and he was asking me the password immediately. I know it was going to sleep because I could hear the beep immediately when I closed and opened, but now it takes just too long.

    In addition, every time I have boot into windows or resume in a sleep state windows, I hear the sound of the device, like something being connected input/output. But there's nothing being plugged or back at the time. I can't to Device Manager fast enough to see who it is who is the cause.

    But all the drivers seem to be correct.

    Thanks in advance.

    Sam.

    EDIT: Also noticed, when the lid is closed, randomly the laptop turns off (beep) one then turns left.

    Weird.

    T420 model number: 4180-PR1 with operating system: Windows 7 Pro 64-bit

    Completely wiped the machine and reinstalled everything. No Acronis this time and work all fine.

  • When I close the lid on my laptop, random programs begin to run.

    1. so here's the deal:

    I have laptop Dell XPS L502X in Win7 Pro;

    b. out of nowhere, and all of a sudden the next irritating problem started havoc. When I close the lid on my laptop at night, random programs begin to run. The desktop icons move into other folders or the trash. It changes the size of the larger icons... it changes even the settings 'snap to grid '.

    2 until you tell me to turn it off or put it to sleep extended mode... I need to let you know that I need to leave the mobile "awake" so that it downloads my incremental changes to Carbonite cloud, as well as my local/resident of mirror [Carbonite] drive.

    3 oh yes: I also went up to disable the 'mouse' integrated glidepoint device, too: same result... madness.

    4 I jumped every hoop I can think... to run the diagnostics runs each available from Norton 360 scan... Online / remote - to both Norton AND Microsoft support.

    Help!

    Original title: HELP HELP HELP! My computer has gone NUTS! When I close the lid for a short period of time, it starts to launch/open/program files on my desk... Ouch!

    Hi Benjamin,

    I can understand your annoyance in that regard. I appreciate your effort posting this query to the Microsoft Forums.

    I would be grateful if you can provide us with information to help us better understand the issue.

    1. Did you change in the computer before this problem?
    2. What types of files are open when you close the lid of the laptop?

    Please provide the Event Viewer logs to resolve the issue and the screenshot of the desktop icons.

    Check out the link to check the Event Viewer logs.

    https://support.Microsoft.com/kb/308427?WA=wsignin1.0

    Note: However, the link is good for Windows XP, you can check the link to check the computer for Windows 7 Event Viewer logs.

    I suggest that we do a system restore to last good configuration.

    You can check the link below to perform a restore of the system.

    http://Windows.Microsoft.com/en-us/Windows/system-restore-FAQ#1TC=Windows-7

    Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

    I also suggest you to see the link to create a restore point.

    http://Windows.Microsoft.com/en-us/Windows7/create-a-restore-point

    Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

Maybe you are looking for

  • Contacts E-mail only automatically add to Contacts from the Exchange (Office 365)

    Don't know if anyone else has this annoying problem... Something is create new E-mail contacts only in my 'Exchange' directory of contacts OSX. They do not appear in the 'Contacts' Exchange directory (I use Office 365 for enterprises). They seem to h

  • Bronx Emoji - Suggestion

    New York City Emoji: Emoji listed for NYC are the Statue of liberty, you have a few buildings for Midtown and a building of Brooklyn (BK) - is it possible to add the Bronx as an emoji? For example: you can use Yankee Stadium, the Bronx Zoo and The Ne

  • Ethernet and wifi not working not not on 1318ax g6

    Mr President, my laptop is HP 1318ax g6. When I buy this tour I have installed windows 7 but now format and install windows 8. But after installing the windows 8 port ethernet and wifi doesn't work. I download and install the drivers to recommend hp

  • Programmatically determine the default value of control

    Hello I'm trying to understand a reasonably sustainable method to detect if the sub VI input is wired. I use the approach to the definition of an absurd default for the control, and then by comparing the current value of the control to a constant of

  • HP ENvy 17 - J100 of TS: had to do a fresh install Win 10 and now it ask me a license #?

    This is my 1 year, Envy 17 "computer touchscreen laptop. He had Win 8 PRO installed when I bought it from a retailer. After I upgraded from 8.1 to win 10 he had a lot of questions, and finally last week it crashed. So I had to make a sweet victory 10