My USB 3.0 internal card reader SD and bus have both work to quit at the same time. Need help in restoring

Similar Questions

• Portege R500: Card reader SD and ODD do not work - drivers needed

  I have laptop portege R500, product number: PPR50E-04X04WCE.

  last year, I changed the operating system and installed windows 7.
  Since then, I can't use the dvd drive or the sd card reader.
  And the control panel it apears two unknown devices, but I can´t find the controllers for these.

  What can I do to fix this?

  I assume you found unknown devices in Device Manager.
  Check it please http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78
  Here you can find instructions how to identify the unknown devices.

  I checked the Toshiba download under http://www.toshiba.eu/innovation/download_drivers_bios.jsp page and your Portege is listed there, but under the option ARCHIVE. It is supported for Win7 so there is no problem to install all the drivers available.

  Check it out please and let us know if you still have the same problem.

• Satellite A200-1AX: card reader SD and BT do not work after installing Win XP

  Hello

  About a year and a half, I bought my laptop Toshiba Satellite A200-1AX and I'm very happy with it.
  It had Vista on it. For this OS, my SD slot worked, but I don't know the bluetooth because I don't use it.

  Some time passed and I removed Vista and now I have Windows XP with sp3.
  All right, but the SD slot does not work. Bluetooth does not work as well and it is not listed in Device Manager.
  I tried Toshiba Bluetooth stack, and when the installation reaches the driver part it does not move.

  Here's a screenshot of my device manager:
  [http://img22.imageshack.us/my.php?image=devicem.jpg]

  Those with question marks is not supported by XP as I know, correct me if I'm wrong.

  Hello

  Satellite A200-1AX belongs to the PSAE6E series.
  It s equipped with BT module so after installing battery BT BT should work correctly, you need to activate using the FN + F8 keys.

  Regarding the housing of card reader SD;
  You must install the Flash Media Driver for Texas Instruments. This is the driver for the Bridge Media Slot. This slot allows you to insert an SD card, Memory Stick (Pro) or xD picture cards.

  By the way; the BIOS must be updated after the installation of Win XP. There is a version of BIOS (5, 60-WIN right now) that is specially designed for Win XP

  Good bye

• Satellite P10 824: card reader SD and IrDA doesn't work

  I have a tosiba Satellite P10 824 a I don't know why I can use Infra red and sd card reader.
  I installed the driver but I do not have nor why I can use.
  When an sd card I can't and I can't send anything via infra red.

  Hello

  Check the Device Manager.
  Are the mentioned devices properly recognized in Device Manager or there is some yellow exclamation points?
  How did you install the operating system? Train the Toshiba Recovery CD or manually? This issue has been published since the first day, or you have installed any 3rd party applications?

  As you can see there are a lot of questions because no one knows what you have done on your laptop. In my opinion the damaged registry entries might be a reason for these issues.

  I think that you should try to remove the SD card reader and Irda device after the Restart Manager again you should auto search devices.
  The drivers have to update and it should be possible to use the devices.

• I downloaded Adobe Reader XI lost the Version 9 of Acrobat Reader - and threw away my Adobe Reader 9. I need both for a forms conversion project. How to bring back version 9? (Online adobe documentation implies that both could be available at the same tim

  In other words, how can I get version 9 without losing the XI version?

  Hi Bob2,

  You can download the exe for Reader 9 using this link ftp://ftp.adobe.com/pub/adobe/reader/win/9.x/9.0/uk_UA/ & then install the updates.

  Kind regards
  Nicos

• Output 2 sound at the same time cards

  I have many reasons why I won't release of multiple sound cards at the same time. I know I'm not the only one who has this problem based on some quick searches of bing.

  I would like to be able to output sound sound at the same time instead of having multiple cards to change the "default device" in Control Panel audio all the time I want that they ALL as default device. I want to use my USB headset and speakers at the same time. I know that windows is capable of this because if we play I can "test" each other, and they both play a sound at the same time

  As far as I know there is simply no setting for it. Help, please!

  Hello
   
  Unfortunately this does happen, as it is by design,
   
  Here, a single device can be marked as default device, follow these steps below for more information.
   
  1. click on start, type Sound in the box to start the search.
  2. click on sound in the results of search at the top of the start menu.
  3. click on the tab reading notice the check mark next to the default device.
   
  As it is a design problem, there is nothing we can do from our end.
   
  If you want to suggest changes in the design here is the link you can make reference to: Microsoft Connect - back products and bug reports. Microsoft...
   
  https://connect.Microsoft.com/dashboard/Info/

  Thank you, and in what concerns:

  I. Suuresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• How to use the modem (2 Mbps) wired ADSL & 3G data card services to large internet wireless broadband (7 Mbps) in Windows XP at the same time?

  Hello
  I have a (2 Mbps) wired DSL modem and internet connections broadband wireless (7 Mbps) of 3G data card.
  When I use these internet services individually, they work very well.
  I like to use these services wireline & wireless internet connections at the same time, so that I get the total speed of 9 Mbps.
  When I connect and try to use these internet services at the same time, I can't go through it.
  Please inform how to configure Windows XP to do this?
  Thank you
  -to swim.

  Hi dswam,

  Please provide your comments on the design of the Windows network. If you want to see several internet connection option in the future versions of Windows, you can submit your comments here.

• Internal card reader & USB ports stop working in Windows 7 64 bit - HELP

  This seems to be VERY popular problem between Vista and 7 users. I can't find the right difficulty any where. I have a HP Pavilion of D5200T running Win 7 Home Premium 64-bit. (I can provide more specific if necessary specifications). I read a few other posts in this forum with exactly the same problem as me, I tried the suggested fixes - most of them anyway - and my problem persists.

  This is the story of the kind: bought PC Cognac nine in June 09. It came with Vista Home premium 64-bit. On the front panel, I have the HP 15 in 1 reader cards and below that another panel with micro/headphones, 2 USB ports and 1 port Firwire catches. They all worked great worked great, no problem at all. I bought Windows 7 and improved in October 09. These two USB ports and card reader have been in place since then. I turn on the computer or restart works and they. Slide into a car SD, CF, whatever it is. Little green light turns on, windows automatically opens on the screen indicating the contents of the card.

  The card reader is no longer everything first. It may be 15 minutes later, perhaps hours. I slip on a map and still get the little green light but nothing on the screen. As if no card has been inserted. 2 USB ports will do the same thing, just much less frequently. I step a USB item and I have an error message saying: is not recognized or not installed properly. If I restart - they are all back to work very well.

  So... this problem only started after the Windows 7 installed, then it is clear to me is where the problem lies. When card readers or USB is in their State of non-working, I'll go to Device Manager and see that they are always listed, and there is no indicator of errors.

  This is what I remember by train so far, without success. I uninstalled devices from the Device Manager, driver too. I tried unplugging them from the card, restart, reconnected, reinstall. I tried different plugs on the motherboard. I can't find the latest drivers. The courses are MS 21/06/06 6.1.7600.16385. I think I tried all utilities integrated in Win7 to try and diagnose, and none of them produced no results. I tried to disable the sleep function. I even reached out to HP support, and the best they have resulted so far is that the card reader is bad. They are sending me a new, but I do not think that this problem will be solved.

  As I said, I see this problem or similar to many, many forums but I have rarely seen a happy ending where it was fixed. Someone at - it the key? Help, please.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Internal card reader card ZBook 15 SC

  I wonder if someone can provide specifications or information about the speed of the SD card on my new ZBook 15 reader. I use this for work and want to have a removable device to store personal files. I am currently using a 32 GB SD card, but it isn't excellent performance. I am considering either pass a 64 GB USB 3 flash drive or faster 64 GB SD card. What I want to know is how (what bus) internal card reader is connected to the and which will be a limiting factor even if I buy a fast SD card. Is there a record of read/write for the crack and what can be expected with different types of SD card?

  Hi Mcramblet,

  To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do it at Business Forum.
  
  Thank you.

• Internal card reader freezes Satellite Pro A due to bent pins

  Hello

  The stems of my internal card reader are folded due to a card of memory being glued and then removed.
  This causes windows to freeze at startup.

  Now I can disable the software etc. to stop what's happening, but what I'd rather do is to physically unplug the internal card reader, so Windows does not attempt to find it and crashed.

  Is it easy to remove the card reader internal?
  If yes then it would cost a fortune to obtain Toshiba to fix?

  I don't really want to spend a lot of money on something that is not a value of more than £200, which I intend to sell soon.

  See you soon,.
  Dave

  > but what I'd rather do is unplug physically the card reader internal, so Windows does not attempt to find and crash.

  Since the card reader is part of the motherboard, you can not disconnect it physically.
  In your case, there are two possibilities;
  Either buy and replace the motherboard (I think that it s not an option for you die at high costs) or you would disable this card reader in Device Manager

  Welcome them

• Satellite M40X: Internal card reader does not work

  My internal card reader does not work. I think that I have not yet installed the driver, or may have other reasons, I don't know. Please show me how to find and install this driver.

  Thank you!

  Can you please check the Device Manager and tell us if any unknown device is listed there?

• My Satellite A100 does not support SDHC cards with the internal card reader

  Hello

  My Satellite A100 can't stand my sandisk 4 GB SDHC.
  'normal' SD cards are not a problem with the internal card reader, and there is no problem with the 4 GB sandisk SDHC card using an external card reader.

  is there a software solution?

  regrads,
  Itock

  I don't have the time to read the manuals for your model of laptop users, but can be registered to all supported cards. I guess SDHC not registered and not supported.

  I don't know what you mean with the software solution, but as far as I know, update for multimedia card reader is not available.

• internal card reader must be disabled and then enabled in before Device Manager it will not work properly.

  Whenever I start my computer, my internal card reader must be disabled and then enabled in before Device Manager it will not work properly. I put an SD card in there and auto does not work. I check my computer and it shows that it is there, but when I double click on it to open it I get a message saying: Please insert the SD card. When I go to Device Manager and disable and enable fine orks. I tried different cards, but it makes no difference.
  I installed a different card reader, but another did the same thing. This leads me to think it's a matter of Windows.
  I tried to do a repair install, but it ends and said that the upgrade has failed?
  Anyone have any ideas on how to solve this problem.

  I am running Windows 7 Pro 64-bit. It is a Renesas controller and I use the 2.1.28.0 with firmware driver 4015.

  I'm not sure but I may have found the problem. I see where a guy here was having a similar problem and it was caused by Acronis. I recently installed Acronis 2012. I have been lucky to uninstall, but I will update this post when I do.  He was also running windows 7-64 bit on a motherboard ASUS!

  Acronis was the problem.  I uninstalled Acronis and now my card reader works as it should.  Strange!

• I can't get two cards USB worked at the same time

  I use Labivew 8.6 to program an application using NI UBB-9211 and USB-6211 connection to two USB ports on my PC in order to measure the temperature and pressure (voltage) at the same time. Also, I need to generate two AOs of USB-6211 to drive my engines. I tested two cards, they are OK. But when I program them together, I get only 9211 worked, an error poped to acquisition of data USB-6211. Could you please help me on this? advice or examples of VI / would be greatly appreciated. Thank you in advance!

  Hi navistar.

  It seems that you should be able to do what you are trying to accomplish. Can you post some information about the error you receive? You use the lower level Assistant DAQ or DAQmx screws in your application? You can post a screenshot of your code where it is merged together and easier troubleshooting. You use any trigger of your application? We have examples in the example Finder (help > find examples) under Hardware Input and Output > DAQmx. These examples are a good place to start to build your application. If you already have the code work for each instrument and you have problems combining them, it might be easier to work with where you are at as opposed to leaving it everywhere.

• Look at the card and the reader at the same time?

  Are you able to listen to music from the sd card AND the reader at the same time? As the mixture between thbe reader and card? Or is it one or the other?

  Thank you kindly.

  Yes. If set to the random mode, for example, it selects randomly beaches/files of two memory slots.