My v3 wifi adapter - 112 p does not (broadcom) - code 10 in Device Manager

Similar Questions

• Satellite Pro 6050: WLan controller does not seem to be in Device Manager

  I'm a novice guy with computers.

  Well, I re-formated my laptop and re-installed all the drivers, but my wirless lan controller does not seem to be in my device manager.
  I was just wondering, if the driver needed to be installed in a certain order. I also had my add on the Vodaphone mobile card plugged into slot on the side that would make a difference?

  in any well any help would be great
  Dane :-)

  Hello

  As far as I know that the WLan card was optional on this unit. In this case, if you bought the device with wireless network card that WLAN should appears in Device Manager. But if you bought the laptop without the WLan card you won't find it in Device Manager.

  PS: The recovery CD already includes the WLan driver and you don't need to t in addition no driver to install.

• HP Pavilion Elite m9543uk: BDDVDRW GBC-H20L CD/DVD doesn't work does not, but is in the Device Manager

  BDDVDRW GBC-H20L CD/DVD does not work after update to Windows 10 Pro Windows 7 Pro this in Device Manager & this PC but when I double LK on this take a long time to load (it is called playing autoplay but does ' t), then it says Windows cannot access the specified device, path or file. You do not have the appropriate permissions to access the item (I am an administrator with full control).  When I RC on the reader a list of options come & I play the disk after a long wait. but it is very choppy can you please help. I also tested for all the bad guys, but I seem to be clean.

  Again thanks for the advice I will now roll back to Windows 7

• CD/DVD drive not working do not error code 41 in Device Manager

  Original title: code41

  I went to the Manager of devices-uninstalled cd & dvd, rebooted, devices are see the watch but always error code41. When I insert a music cd, the Unit looks like it is will start up, then stop? I also tried the Fix - it on the web site, still does not? Any ideas?

  Hello

  Method 1:

  Try the steps suggested in the given below link and check if this is useful.

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-doesn

  See also:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Note: In the article below try the manual steps for the removal of the filters and check if that helps.

  Method 2:

  This problem may also occur if you install a non-Plug-and-Play device driver, but Windows cannot find the device. Here are some things you can try to solve this problem.

  If the Troubleshooting Wizard does not resolve the problem, do one of the following:

  ·        If the device was removed, uninstall the driver, connect the device, and then clickScan for the hardware changes to reinstall the driver.

  ·        If the material was not removed, the driver files may be obsolete. In this case, update the driver in Device Manager. In the device properties dialog box, click theDriver tab and then click on update driver to start the theHardware Update Wizard. Follow the instructions to update the driver.

  ·        If the device is a non-Plug-and-Play device, you may need to install a newer version of the driver. To install non-Plug-and-Play devices, use Add Hardware Wizard. Click Start, and then clickRun. In the Open box, type hdwwiz.cpl.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• WiFi and apple tv does not connect for Colocation

  WiFi and apple tv does not connect for home sharing

  Please give more details about your configuration, the version of the Apple TV and software, home sharing server, etc. Others here know much more about it as I have, but they will need a clear description of the problem. You can also try to search for this site for home, sharing problems and take a look at any recent threads that you present to.

  You use the same Apple ID everywhere? ATV currently sems to have problems with Apple improved authentication protocols, so I hope they are not turned on for your Apple ID. You have enabled sharing House in configuration of the ATV?

• Message from Microsoft Windows Error Reporting that says: upgrade your display adapter graphics card does not support DirectX 9.0 or newer

  I have a message that says Microsoft Windows Error Reporting: upgrade your display adapter graphics card does not support DirectX 9.0 or newer.  My screen blanks outs initermittently and icons on the desktop are very grainy? all patches, easy?

  Hello

  
  Perform the steps in the article and see if the problem persists
  http://support.Microsoft.com/kb/283658
  
  Hope that helps.

• JMS adapter Request-Reply does not

  I created a request-response in the JMS adapter, but its does not work... can someone suggest me the script step by step...

  Blog of Biemond has a good...
  http://Biemond.blogspot.com.au/2009/10/JMS-request-reply-interaction-pattern.html

• Why my audio midi Setup does not recognize my external midi devices?

  Why my audio midi Setup does not recognize my external midi devices? The midi interface and all midi devices are connected.

  P.S. The icons and the midi interface are all "grayed out" in the midi studio window when I click or double click on it nothing happens.

• I created a my page book epub file, and it works perfectly in ibooks. But it does not appear on my other devices, and the .epub file cannot be successfully sent by e-mail. 5.6.2, iBook 1.5 pages

  I created a my page book epub file, and it works perfectly in iBooks. But it does not appear on my other devices, and the .epub file cannot be successfully sent by e-mail. 5.6.2, iBook 1.5 pages

  What's not?

  You must check the iBooks category in your OS X system preferences: Panel iCloud: iCloud Drive: Options: Documents Panel. On iOS, you must have enabled to iCloud and in the iCloud Drive location setting iBooks. Also, in iOS parameters: iTunes and App Store, ensure that iBooks is running.

  The iBook.epub file is a compressed/compressed and renamed folder that represents a single file to any email client. What do you mean, it cannot be sent correctly - and it's your experience, send, or the failure of the recipient to view the ePub document? What email client?

• I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  1. did you remove Bootcamp using disk utility?

  2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.

• OfficeJet Pro X451dw (CN463A): updated the Firmware says X451dw "EC Firmware Updater does not contain updates for your device."

  I'm trying to update the firmware on my HP Officejet Pro X451dw (CN463A), but the firmware update fails with the error "This Firmware Updater does not contain updates for your device." More precisely:

  1. With the help of EWS, I confirmed that my current firmware is very old (it lists the firmware version of BWP1CN1315FR, which means 1315FR, right?, dating almost the time I bought the printer about 3 years ago).
  2. I downloaded the firmware ("OJP_X451dw_R1640A_updated.dmg") was last updated, copied 'HP Firmware Updater' in /Applications and then he ran.
  3. It shows my printer in the Device Discovery list. I selected and clicked on continue.
  4. He thinks for a while, displaying "recovery information...". »
  5. After a wait of 30 seconds (approx.), it displays "EC Firmware Updater does not contain updates for your device."

  Any suggestions?

  You're welcome @justkwin.

  Here is the utility of a Mac computer:

  FTP://g4u0180.Houston.HP.com/FTP4/pub/softlib/software13/printers/pentane/OJP_X451dw_R1548A.dmg

  Kind regards

  Shlomi

• NI-VISA 5.3 driver Wizard does not support USB 3.0 devices

  Hi all

  It seems that NI-VISA 5.3 does not support USB 3.0 devices. When I try to use the driver Wizard to create a driver for a USB 3.0 device, I get the error "ERROR-1073807178: device descriptor error - value not valid bMaxPacketSize0 (must be set to 8, 16, 32, or 64 bytes). I noticed that the unit has been giving wMaxPacketSize0 of 512 (2 ^ 9). But the driver Wizard treats the value 9. So I think that Assistant driver does not support USB 3.0 devices. If someone could confirm this?

  Thank you very much in advance!

  Jackie

  Hello Jackie,.

  Unfortunately, USB 3.0 is not officially supported in VISA 5.3 when you use VISA Driver Wizard.

  A non-official solution is to work around the "information in the descriptor' by selecting 'Other' in the list of devices. You will need to manually enter the 'USB manufacturer ID (vendor ID)' and 'type USB (Product ID) Code. You will then need to find your driver in Windows Device Manager, right click and select "update driver software". This, however, is not a workaround solution guaranteed as NI-VISA 5.3 is not officially compatible USB 3.0.

• My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers. What should I do now?

  My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers.
  Convenience store said to click on properties Insert the diskette and
  Double click on open, but when I do that it stop computer
  and opens the recovery and ask for a correct diskette,

  Hello Tallm,

  Thank you for your message.  Did you get your floppy drivers of your installation diskettes?  If so, go to the website of the manufacturer of your computer and download/install the latest drivers.  Please let us know if this or help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Gets the error in Windows Denfender for "the specified service does not exist as an installed device (error Code: 0 x 80070424).

  My computer was slow, so I tried to scan all using Windows Defender, and this error message keeps popping up, "the specified service does not exist as an installed device (error Code: 0 x 80070424) I don't know how fx this.» I' of love too see if there is another reliable computer, free softwear that can scan and virus scanning spywear.

  Hello

  Windows Defender is an antispyware software, not an Antivirus.

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And try this method for the analysis of Malware

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• HL-DT-ST DVD-RAM GH40L SCSI CdRom Device does not work code 32

  HL-DT-ST DVD-RAM GH40L SCSI CdRom Device does not work Code 32

  The other post:

  HL-DT-ST DVD-RAM GH40L SCSI CdRom Device does not work, another driver can provide this functionality. (Code 32)

  Hello

  1 are there any changes or updates made on the computer?

  2. when exactly you get the error message?

  Code 32: a driver (service) for this device has been disabled. Another driver can provide this functionality.

  I suggest to return the item and try to run the fix it and check if it helps.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Let us know if it helps.