My V5-571 CAREB is extremely slow at startup and would become very hot gel frequently

My laptop CAREB 571 V5 running on Windows 10 is extremely slow at startup and becomes very hot, gel frequently.

I recommend reloading the windows to see if it helps the slow and freezing. If it is not the case, I suggest that you contact technical support for repair options. I am including the instructions below to reload Windows without losing any data.

http://Acer.custhelp.com/app/answers/detail/A_ID/37335

Tags: Acer Laptops

Similar Questions

  • with what my windows vista, does not not, extremely slow, start, stop, and overall functioning. This model is an H.P. Presario420US I have not downloaded anything at all to clog it HELP! TX. Email removed for privacy

    Why is my computer so slow? I have windows vista in a notebook presario H P, 6 months old. It is slow to start, slow operation and when I stop it takes forever. I have not to down load something for her to cover. It dose the same when I try to wbob249ork offline. It says Windows NO answer.  Help!  any input would be greatfull. E-mail address is removed from the privacy *.         OR * address email is removed from the privacy *.

    Start with "clean boot" (read article) and check if the system works better in a State of "strictly punt.

  • I'm trying to download a trial version of illustrator and it is be extremely slow, eventually close and not fully install

    Does anyone know why I can be having issues download the trial version of Illustrator on my mac? I never had problems with downloading of any software, and Adobe has never been slow.

    Clear Tmp folder.

    If you use Wireless / Wifi Internet connection, if possible try with wired Ethernet connection.

    Disable the firewall if this is ON, temporarily.

    Or you can also download Illustrator using the direct link:

    Direct download links of Adobe CC 2014: 2014 creative cloud release | ProDesignTools

  • Satellite L650 - extremely slow at startup, then "not responding" message

    I bought my Toshiba Satellite L650/017 laptop about 3 weeks ago and it was working well.

    This week, I plugged a cable to work on my laptop and double clicked on the icon of Internet Explorer to see if I had access to him but found it is not the case then disconnected the cable and turned off the laptop computer on the internal internet.

    The next day, I found that the laptop could not start after restarting it a couple of times so I ran on safe mode and did a virus check which proved to be negative.

    The next day, start seemed a bit faster and I could access some of my Word documents stored on the hard drive.

    Today, problems with the start seemed even worse and it took about 10-15 minutes to access the WINDOWS page - mainly get a gray screen with cursor work dark.

    When she has finally reached the office page after trying to open any application after a few minutes, a message "not responding".

    How can I fix? What is initially to run so slowly?
    He doesn't has only few Word documents stored there on the hard disk. I hope someone can help me with this...

    Hey Buddy,

    To be honest in these cases where the error just sometimes, it s not clear what part is defective or if it s just a software problem. In addition you didn t post information on your Windows installation, which makes more complicated history.

    But if I understand you correctly, you can boot into safe mode without problems, right? Well, that would mean he s a driver or software issue because in safe mode no drivers will be loaded (just the standard Windows drivers).

    If you run the pre-installed Windows version, you should try to reinstall Windows from the HARD drive recovery function. You know about it?
    If this is not the case, see your user manual. A lot of information, you can find on this nice feature. :)

  • Windows 7 is extremely slow going sleep and wake.

    I timed it the other day; It has taken almost five minutes for Windows enter the mode 'sleep'. I tried to turn it back on, and it took literally five minutes before the logon screen appears. She does on a regular basis, and it starts to become very irritating. I tried to update my drivers, but Device Manager claims they are up-to-date. If it helps, I run the 64-bit version on a HP laptop with 4 GB of ram. The processor is an AMD Turion 64 X 2 TL - 60 to 2 GHz. I can provide more information if necessary. If anyone has any advice at all, it would be greatly appreciated. Thank you!

    A problem of incompatibility for 7 with your chiopset drivers (ACPI). You can try to find the Win 7 drivers on the website of the manufacturer of the system and on Windows Update.

    Messages rating helps other users

    Mark L. Ferguson MS - MVP

  • Microsoft Update maintains the search forever and pc becomes very slow

    Hi all

    Last week did a cleaning installation (windows 7) on my old laptop.

    (the material is not good enough for an update for windows 10)

    At the beginning everything was fine and some updates have been installed.

    However, after the installation of "Windows 7 Service Pack 1 for x 64 systems (KB976932)" the trial was kept updated search forever and the laptop became also very slow.

    While windows searches for updates, the process "svchost.exe" develops very quickly in the memory usage and fills after a few minutes the total RAM.

    I tried various corrections (see for example the you link below), but none of the solutions worked for me: (.)

    http://superuser.com/questions/951960/Windows-7-SP1-Windows-Update-stuck-checking-for-updates

    For now I have disabled the update, but this isn't a permanent solution.

    I hope that any body could help me solve this problem.

    Thanks in advance!

    P.S. I also added a picture of the history of the update below.

    In addition, the laptop is an acer aspire 7715

    Please try the following: set never 'Find updates' automatic updates and restart. Download and install KB3020369 and KB3161608.

    https://support.Microsoft.com/en-us/KB/3020369

    https://support.Microsoft.com/en-us/KB/3161608

    Best regards, VZ

  • emails are performing extremely slow

    Hello
    After I installed my new Dell PC with Windows 8.1, I wanted to start using Thunderbird as my emailprogram.
    I downloaded the version 31.6.

    However, it seems to me that the performance of the e-mail is extremely slow. Sending and downloading of emails are nice, but move an e-mail to the following in the Inbox takes up to 20 seconds! Removal of e-mails, same thing! In both cases, I get the message "TB is not responding.
    Switching between my two accounts is also a process frustrating, which lasts even longer.

    Pleae, which ca help me in telling me what I did wrong?
    Thanks in advance.
    Kind regards
    Haico

    Computers Dell seem to come with McAfee security/antivirus software pre-installed, and if this applies to your system, it is recommended to stop the McAfee analysis of the mail files:

    https://wiki.Mozilla.org/Thunderbird: test: Antivirus_Related_Performance_Issues #McAfee

  • Toshiba Store Art 2.5 "500 GB - extremely slow

    Hello

    my hard drive the Art nouveau department store seems to be
    (a) extremely slow when seeking, and
    (b) slows down the entire operating system.

    I tried on two different computers, both running with xp sp3.
    My very old USB hard drive is 100 x faster than :-(

    I have no idea what to do to resolve this behavior, I started to think of returning the product to the retailer :-/

    Thank you
    Peter

    Hi pepcok

    Thanks for this feedback
    He greatly appreciated s...

    Welcome them

  • Administration console extremely slow to save changes

    We are duplication event bookings in Business Catalyst to create new dates on our site (we sell face-to-face courses).

    Our admin team had trouble with the last 4 + months. The administration console is extremely slow save changes and will sometimes disconnect you with:

    "Error code: 0Message: Sys.WebForms.PageRequestManagerServerErrorException: an unknown error occurred while processing the request on the server." The status code returned by the server was: 0 "

    Any ideas on how to make admin console user friendlier for those minor updates?

    We contacted our Web designer who can't seem to reproduce the problem on their end.

    Thank you

    This seems also spent a few years in the EU Admin Console takes forever to save

    This seems to be something more for the moment.

    Could you do a real support, ticket say that there are several partners and messages of the forum on this issue more and more and see where you get with that.

  • I just bought my i phone 5 s yesterday and this becomes extremely warm while using and supported... Please tell me what to do and write the steps because this is my first device apple and ive saved for it for a long time so im really be disappointed

    I just bought my iphone 5s yesterday and it is extremely hot, that I don't know the reason why I heard it was the Icloud, so I pulled out and turned it off but now I can't download any app from the app store and its plugged into the charger and it's still hot... Please someone tell me a solution in the form of steps because it is my first apple device and does not give me a good influence...

    The device must not become "very hot".  It can become hot depending on what you do with it, and if it is connected and supported.  Your best bet would be to visit an Apple Retail store genius bar (if it is nearby).  Or, if there isn't one, your device comes with 90 days of support by complementary phone (assuming that you bought new), contact applecare one ask for their help.

    AppleCare U.S. phone number: 800-694-7466

    https://support.Apple.com/en-us/HT201232

  • Firefox has become very slow. It takes a lot of time to load any website. I reinstalled FF but the fleeting problem.

    Firefox has become very slow. It takes a lot of time to load any website. I reinstalled FF but the rest of the problem.
    As a test, I downloaded Chrome and it is much faster.
    But I love FF and would be very happy if you can help me solve this problem.

    Hi Reos,

    When you reinstall Firefox it always uses your old profile with all the old things that you had. That said, you're lucky, there is a new feature that lets you "Reset" of Firefox. This will remove some of the pieces that might cause problems while it keeps your bookmarks and other important things safe.

    Check it out and let me know if it works: Refresh Firefox – reset the parameters and modules

  • extremely slow response on mac, used to work properly, the difficulty?

    No matter what I'm doing with TB on mac (OS of Yosemite, latest version of TB) it is extremely slow and unresponsive, tried uninstalled and installed again without success

    ewaisman,
    You still see the problem?

  • Extremely slow since 10.11.6 updating

    Since the update a few days ago everything is going slowly, barely usable.

    Someone has an idea of what I need to do?

    EtreCheck version: 2.9.13 (267)

    Report generated 2016-08-07 14:41:23

    Download EtreCheck from https://etrecheck.com

    Duration 20:05

    Performance: Poor

    Click the [Support] links to help with non-Apple products.

    Click [details] for more information on this line.

    Problem: Computer is too slow

    Description:

    Extremely slow since the update 10.11.06

    Hardware Information:

    MacBook Pro (13-inch, mid-2012)

    [Data sheet] - [User Guide] - [warranty & Service]

    MacBook Pro - model: MacBookPro9, 2

    1 2.5 GHz Intel Core i5 CPU: 2 strands

    8 GB of RAM expandable - [Instructions]

    BANK 0/DIMM0

    OK 4 GB DDR3 1600 MHz

    BANK 1/DIMM0

    OK 4 GB DDR3 1600 MHz

    Bluetooth: Good - transfer/Airdrop2 taken in charge

    Wireless: en1: 802.11 a/b/g/n

    Battery: Health = Normal - Cycle count = 1024

    Video information:

    Graphics Intel HD 4000

    Color LCD 1280 x 800

    Software:

    OS X El Capitan 10.11.6 15G (31) - since startup time: less than an hour

    Disc information:

    Disk0 APPLE drive HARD TOSHIBA MK5065GSXF: (500,11 GB) (rotation)

    EFI (disk0s1) < not mounted >: 210 MB

    Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

    Macintosh HD (disk 1) /: 498,88 go-go (260,14 free)

    Encrypted AES - XTS unlocked

    Storage of carrots: disk0s2 499.25 GB Online

    HL-DT-ST DVD - RW GS31N)

    USB information:

    Apple Inc. FaceTime HD camera (built-in)

    Apple Inc. Apple keyboard / Trackpad

    Computer, Inc. Apple IR receiver.

    Apple Inc. BRCM20702 hub.

    Apple Inc. Bluetooth USB host controller.

    Lightning information:

    Apple Inc. Thunderbolt_bus.

    Guardian:

    Mac App Store and identified developers

    Launch system officers:

    [loaded] 7 tasks Apple

    [loading] 163 tasks Apple

    [operation] 68 tasks Apple

    Launch system demons:

    [loaded] 47 tasks Apple

    [loading] 163 tasks Apple

    [operation] 82 tasks Apple

    Launch officers:

    [loading] com.google.keystone.agent.plist (2016-07-12) [Support]

    Launch demons:

    [loading] com.disc - soft.DAEMONTools.PrivilegedHelper.plist (2013-12-27) [Support]

    [loading] com.google.keystone.daemon.plist (2016-07-12) [Support]

    [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

    User launch officers:

    [loading] com.bittorrent.uTorrent.plist (2016-02-16) [Support]

    [loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-08-06) [Support]

    Items in user login:

    iTunesHelper program (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

    Other applications:

    [ongoing] com.etresoft.EtreCheck.77152

    [loading] 407 tasks Apple

    [operation] 167 tasks Apple

    Plug-ins Internet:

    SharePointBrowserPlugin: 14.0.0 (2010-08-25) [Support]

    Silverlight: 5.1.41212.0 - SDK 10.6 (2016-01-21) [Support]

    QuickTime Plugin: 7.7.3 (2016-08-02)

    Web of Google Earth plugin: 7.1 (2015-11-22) [Support]

    Default browser: 601 - SDK 10.11 (2016-08-02)

    3rd party preference panes:

    None

    Time Machine:

    Time Machine not configured!

    Top of page process CPU:

    9% Google Chrome Helper (3)

    8% Google Chrome

    5% kernel_task

    4% hidd

    3% WindowServer

    Top of page process of memory:

    614 MB kernel_task

    557 MB Google Chrome Helper (3)

    Mdworker (7) 295 MB

    197 MB Google Chrome

    UserEventAgent (2) 115 MB

    Virtual memory information:

    2.15 GB free RAM

    5.84 used GB RAM (1.66 GB being cached)

    Used Swap 0 B

    Diagnostic information:

    7 August 2016, 14:02:36 self-test - spent

    Eruption of ~/Library/Logs/DiagnosticReports/app_mode_loader_2016-08-06-141209_[redacted].c August 6, 2016, 14:12:09

    /Users/user/*/app_list.app/Contents/MacOS/app_mode_loader

    You can start by uninstalling the remains of CleanMyMac3. But I do not think that this will greatly improve things. The long duration of Etrecheck indicates that the hard drive has failed.

  • MP4 is extremely slow in Compressor 3 - upgrade?

    Hello

    I work a lot with the files mp4 (or m4v) and I use a compressor to encode them to the ProRes format - and then to the FCP 7. Currently using Compressor 3.5.3

    The problem: it is extremely slow. When dragging a mp4 file (say about 10 min) causes of compressor to think and reflect and think - and then dragging the parameters is the same. Compressor 4 is more favourable to mp4 files and would be faster? Or is it my computer which makes it slow?

    The MacBook Pro 2.6 GHz Intel Core i7, 8 GB 1600 MHz DDR3

    Thank you

    BTW, what I'm trying to do is to convert mkv in ProRes files. I do it in two steps: first Handbreak, then compressor. It is a tedious process, so if anyone has a better solution I would be happy to hear.

    If your Mac is the "thought", my guess is that it is not your version of the compressor or your MBP this os the cause. The source file - maybe something suspicious on the handbrake conversion

    A plain vanilla MP4 to transcode Pro Res must be handled smoothly by Compressor 3.5 - and fill a bit faster than real time.

    Try this. Take a one minute or two QuickTime movie and convert it to MP4. Now that import compressor and transcode to Pro Res.  OK it works?

    Also, check that your system drive has sufficient free space - say, a minimum of 10 to 15%.  And make sure that your destination disk has of space as well.

    Your question about compressor 4, the answer is Yes. The latest version (4.2) is quite a bit faster than 3.5 - especially for fairly new Mbps and iMacs. It is also an improvement by other means - including options for extended encoding, greater stability and ease of use. (But keep in mind that there is no shipment to capacity of compressor from FCP 7 4.2.)

    Good luck. Post back and we do know.

    Russ

  • My Mac Mini is extremely slow and any video will start but soon stops and intermittently starts and stop immediately. What is the reason?

    My Mac Mini (end 2012) 2.5 ghz memory 8 GB Yosemite 10.10.5 is extremely slow. I read a few articles on communities, but unable to solve the problem. I plan to upgrade memory soon. In addition, a video game doesn't quite work. It starts and stops in 5 seconds and restarts it for a few seconds and stops completely. An advisor to fix the problem will be appreciated.

    When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

    These must be run as administrator. If you have only one user account, you are the administrator.

    Run the Console application in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    The title of the Console window should be all Messages. If it isn't, select

    SYSTEM LOG QUERIES ▹ all Messages

    in the list of logs on the left. If you don't see this list, select

    List of newspapers seen ▹ display

    in the menu at the top of the screen bar.

    Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

    Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

    Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

    The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

    Please don't dump blindly thousands of lines in the journal in this discussion.

    Please do not post screenshots of log messages - text poster.

    Some private information, such as your name, may appear in the log. Anonymize before posting.

    When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

Maybe you are looking for

  • Change the 'From' on mail

    I am afraid that I am not knowledgeable enough to ask this question in a succinct way, but here goes. I have a friend who was impressed that I got my own domain name and, therefore, a [email protected] account. So I checked and it was free! I bought

  • How do I batch convert Quicktime mov to avoid (conversion)?

    I understand that sometimes in 2013 10 Quicktime for Mac has begun to force the conversion of .mov who were in a format inherited to a new format.  The way that is currently done in when I open a file with quicktime, it takes a significant amount of

  • SD-C2502 CD & DVD data does not, movies DVD work OK

    Can anyone tell why my drive suddenly not working for reading data, CD or DVD mode, but play dvd movies as if nothing is wrong.I used the system restore disk that he will not read either.OS is XP Professional SP2.

  • Satellite P30-145: White Rectangle on screen

    I have a Toshiba Satellite P30-145, and he has recently developed a problem with the display. Whenever the computer is turned on, there is a large white rectangle covering part of the screen from top to bottom. Stopping and restarting the computer di

  • How to export entire graphic story?

    I was reading help ( http://zone.ni.com/reference/en-XX/help/371361L-01/lvconcepts/customizing_graphs_and_charts/#Exporti... ) on the graphic waveform and I came across this little piece: "for graphics, you can only export data that is visible in the