My Vaio gesture control does not work with MO Pro 2013 Power Point and 14 Ultra CyberlinkPDVD

Similar Questions

• IR remote control does not work with the new imac

  IR remote control does not work with the new iMac. From 24 "2007 machine to last 27"

  Correct, because Apple no longer includes the IR sensor in newer models

• BD Playstation Bluetooth remote control does not work with Toshiba BT stack

  Hello!

  I've matched Playstation Bluetooth Sony BD remote control (model: CECHZR1E) with Windows XP SP3 (Spanish) PC last Toshiba Bluetooth Stack v.7.10.12 running.
  But if I press the buttons on the remote does not respond any personal computer.

  I have configured the battery Bluetooth to run the AV and AV service must send commands to Windows Media Player. In Windows Media Player, I have configured to use command AV Toshiba.

  If I press a button on a remote control, with he can link to PC, the icon changes color and Configuration Bluetooth appears the link has been established, but it is the interaction I get this remote control.

  Please, advice that tests should I use or do I have to install any additional software.

  Thanks in advance for your kind attention!

  Ensure that the AV remote control Service is running:
  Right mouse click on Bluetooth-> Options... system tray icon-> [general] tab: 'AV remote control Service' (must be verified)

• Site intertwined for Acrobat 9 Standard API does not work with Acrobat Pro XI

  Y at - it a new version of the API work intertwined for integration with Acrobat Pro XI

  After speaking with the support of the autonomy, I discovered that they do not yet support Acrobat XI.  The new API will be available in 1-2 months for integration between Acrobat XI and Interwoven innocuous.

• Portege R500: external monitor does not work with the Port Replicator Port 2 and DVI

  I have a Portege R500 running Vista with a slim Port Replicator II and digital monitor Viewsonic.
  I connected the monitor to the DVI port on the port replicator and got it to work OK.
  Press fn + F5 would switch between the computer screen and the external monitor.

  Then it stopped working, and I can't make it work at all. F5 recognizes just the laptop screen.

  If I connect an analog display, it is fine, and I can pass between the two screens without difficulty.

  The strangest thing is that, if I reboot when the Portege R500 is docked, the digital monitor begins by displaying the boot sequence, but then the signal is lost as soon as the screen stops the display of the progress (in low resolution) bar.

  I spent an hour on the phone to support Friday, and he made me nowhere.
  They finished by saying that he should never have worked! So what is the DVI port because then?

  Any ideas?

  David

  Connect your monitor directly to your laptop and see if it is recognized and you can go through FN + F5 between the two views.
  If it works, then connect with port replicator, and then try again.

  It's probably best if you reinstall display drivers. Maybe there are new too on the download page.

• Satellite A200 remote control does not work with Vista Ultimate

  Anyone know what I have to work for my TOSHIBA (Media Center) remote?

  I had Vista Ultimate installed on my Satellite A200 (PSAE6).

  Remote has worked on software pre-installed that carried out with (he was Deutsch).

  I almost tried everything, all the drivers are installed, I searched on the site of Toshiba drivers and nothing.

  Help, please.

  To my knowledge the Enbeded IR V0.0.0.6C was installed in the factory Toshiba Vista image. This looks like an application needed to run this command remotely.

  Unfortunately, the application looks like a part of the image of Toshiba and was published by download

  by the way; A200-xxx unit you have exactly?

• Foxit Reader does not work with the help of laptop HP and support Guides, suggestions?

  New HP Pavilion with Windows 7 x 64 I downloaded Foxit Reader and installed and then uninstalled Adobe Reader to save space. Then, although it will open my PDF in 'My Documents', it will not open the Guides or learning PDF in HP help and Support files. Is there someone with more experience to use Foxit Reader that may suggest a work around? If I reinstall Adobe PDF then everything works again.
  John

  http://www.foxitsoftware.com/support/

• I bought a Panasonic camcorder, software as HD WriterLE1.1 discovered it does not work with XP pro any other software I can use?

  Panasonic HD HC-V100 software HD Writer 1.1

  XP had around HD video.

  Unless you have a XP spec machine' really good ed, I doubt that it will work well with the hd video that record you.

  You can buy all sorts of editing programs, such as adobe first elements, which will work on a XP computer, but even once, I insist on your pc have enough power to edit HD video.

  You can download a 30 day trial version, if do and see.

  If you are not going to the release of the video in HD, so you're going to make a dvd SD, you can convert HD to SD video, and then edit, using movie maker.

  To get the video from the camera to the pc, use a card reader and place the cam card and simply copy the video files.

• LACP group does not work with stacked 2 DELL PC 6248 and ESXi 2 5.5

  I would like to use LACP/LAG in vSphere 5.5. So I created a new vDS and a group LAG. 2 NICs per host should be used for this. We use 2 hosts, so the total 4 ports are involved. Basically, you can refer to a diagram at vmwares KB article 2051826 (http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2051826)

  It's only 2 lacp group links are active, then the other 2 are inactive. Active is the only one of the esx hosts, it depends on which ports are going to be active first.

  Any advice? Someone at - it a config like this works?

  Best regards

  Alex

  The config for switch:

  ! Current configuration:
  ! Description of the system «PowerConnect 6248P, 3.3.7.3, VxWorks 6.5»
  ! 3.3.7.3 system software version
  ! Passage mode is configured as disabled
  battery
  1 5 Member
  2 5 Member
  output
  Configure

  interface ethernet 1/g8
  Auto mode channel-group 3
  Description "ESX2_vmnic5".
  Disable spanning tree
  switchport mode general
  switchport General disable filtering of capture
  switchport general allowed vlan add 20 tag
  output

  interface port-channel 3
  Description "ESX".
  hash-mode 6
  Disable spanning tree
  switchport mode general
  switchport General disable filtering of capture
  switchport general allowed vlan add 20 tag
  output

  Thanks to the good support at DELL.

  The secret is that you must create a separate group on the switch for each esx host. On the side of esx, you have the config with group a lacp/gal. But on the side of the switch, you need 2 groups for two guests. VMware should have this more clear I think.

• Access to the secure area does not work with user registration registered user name and password

  I have a problem giving access to users who register for the video service I provide. The form that they fill out includes it a chosen user name and the password, which should give them access to the secure area, but is not currently. I'm puzzled.

  In the CRM, the recording of the customer in question has a user name and current password? and on the "Subscriptions" tab, they are subscribed to the appropriate secure area?

  Your form online, under the 'Edit properties' button, "Safe Zone" is set to the appropriate secure area?

• Re: Satellite L500 iCQ, as Volume Rotary control does not work

  Front volume control does not work. Volume is set to maximum and can only be controlled by the mouse and the slider control.
  Can anyone help?

  To be honest I don't think that anyone will be able to help you with this.
  As far as I know that's not used such mechanical volume on older models of computers laptops, but electronically part controlled by software, so the only thing you can do is to test the functionality with the settings and see if the problem will be the same.

  What else can you do? I do not know. Maybe update the BIOS, but I do not think that this will help you.

  Do you use pre-installed OS original you got with your laptop?
  Have you made some changes or anything that can have a negative influence in this?
  Since when you noticed this strange behavior?

• Windows 7 starter edition does not work with Java 7 (unable to load the chat room) how to fix?

  Hello

  I have Windows 7 edition - starter and Java 7 when I try to use a school chatrooom - java won't load properly - tech school says it's because Windows 7 does not support Java 7 - any ideas on how to fix?
  THX,
  Maja

  If he believes that the school needs to get a new technology.

  To check if the problem is that the cat does not work with Java 7, uninstall Java 7 and install Java JRE 6 from here:

  http://www.Oracle.com/technetwork/Java/javase/downloads/index.html

  You must specify the exact error messages see you or post links on the screenshots so that your problem can be better understood.

• Brush control with CTRL + ALT + click right + mouse/pen movement does not work with the tool liquify (photoshop cc 2015): what should I do?

  Brush control with CTRL + ALT + click right + mouse/pen movement does not work with the tool of liquefy; I can't change the size of the brush or hardness. OS win 7 Professional 64 bit, wacom tablet intuos 6.3.14 - 1 driver s pro, Photoshop 2015 CC worm.  2015.0.1 20150722.r.168

  What are your settings of GPU acceleration?  As I understand it, the Alt right click size and hardness adjust needs acceleration GPU to be turned on, but I have a feeling Brush hardness is always set to easy when using fluidity.  You can still see the quick mask as representation of the soft brush when Alt right click, but you can't change the hardness.

  Is that you can change the brush size and pressure (framed in red in my screenshot) Alt right click drag left and right changes size and down to pressure changes, and you can see what is happening in real-time by looking at the sign on the right.  It works independently of your acceleration GPU (IME) settings, but you don't get the effect of soft red quick mask.

  

  Does this fit with what you see, or you are not able to change things at all?  If not, then I've always found that fluidity consumes system resources, if you could check the Task Manager > Performance tab to see what kind of RAM and CPU use is using the fluidity.  That's what I see after direction the lens above with a big brush continuously for 10 seconds.  Note This is on a fairly quick NLE System.

  

• lovely better does not work with windows vista home Premium what another program removes LSO and HOW to prevent the trackers?

  Question
  better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
  Details

  In current versions of Flash you can also do this via the control panel.

  • Control Panel > Flash Player, click on remove and erase data

• Satellite Pro M40X does not work with battery

  Hello

  I have toshiba satellite pro m40x laptop. It haves apromaly 11 months.
  In recent weeks, the laptop does not work with the battery.
  With the battery and the power running, if I turn on the laptop, it turns off after 10 seconds. If I only turn the computer batteries, laptop not respons.
  The laptop works without battery.

  I have rma is not the portable and the technical suport fixed the battery because it only 6 months guarantee.

  I'm sure that battery modules were not upset because I used the battery not very often.
  I disassemble and I wached the control circuit. I'm sure that something of them, it was broken, but I can't fix it without the schema.

  Another question is if I can change the graphics card to laptop. Is actually a x600se but I need power more graphic

  I hope you can help me

  gretings

  Hello

  It is not easy to say what the problem is here. Have you noticed something strange with LED power control? It is also possible that the electronic power supply do troubled. Try to talk with authorized Toshiba and explain the situation. If you open only one Notepad, uneducated, it may be simply worse.

  Graphics card cannot be updated as on desktop computers. I put t know how it is on this model laptop but the graphics card is fixed on the motherboard and cannot be traded.