my vista does not start! Help!

Vista does not start on my computer compaq laptop. After a vista update automatic :(

Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

Try a restore of the system once, to choose a Restore Point prior to your problem...

Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

If the above does not work, try to make a Bootable ERD to do a Startup Repair:

As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

As your grave in the category above, download the ISO on the provided link and do a repair of the disc.

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

When you have changed that, insert the Bootable disk you did in the drive and reboot.

You can make a tool to restart system, System Restore, etc. with it.

Read all the info on the website on how to create and use it.

http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

It's a very good Vista repair disc.

You can do a system restart tool, system, etc it restore.

There is not a disk of resettlement.

And the 32-bit is what normally comes on a computer, unless 64-bit.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • Vista does not start after I disabled the service DCOMLauncher

    Hi all.   I really hope that someone can help me with this, because I can't use my computer at all, and I have to use a notebook different to write this post.

    The problem: Windows Vista does not start with the normal settings or Mode without failure.   To be more precise, after Vista starts, he has only a black screen and a limited mouse functionality.

    The background & problem: I use Windows Vista Home Premium SP 2.   I have disabled the DCOMLauncher Service using the program Autoruns from Sysinternal.

    What I tried: I tried to start Vista in Mode safe with no result.

    Thanks to all those who are trying to help me.

    When you choose Safe Mode choose last known good startup.

    As long as your subsequent boots are deemed unsuccessful, which is perhaps not the case, this will start the configuration before using Autoruns.

    Safe Mode command prompt works?

  • Windows Vista does not start after installing Linux OS

    original title: Windows Vista does not start after the installation of the Linux OS... Help!

    I installed Fedora 10 Red Hat Linux on my HP laptop and now each time it powers on, I can't do vista windows at startup.  Goes directly into Linux.

    I need to get back to normal.  Any help would be appreciated.

    I installed Fedora 10 Red Hat Linux on my HP laptop and now each time it powers on, I can't do vista windows at startup.  Goes directly into Linux.

    I need to get back to normal.  Any help would be appreciated.

    Hey Oscar Jose

    Download the correct ISO file and make a disk bootable from the link below

    Then use the Startup Repair option when you start from

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    or at startup press F11 to start the process of restoration of hp and see if you can reinstall vista from the recovery partition and place your machine, back to the way you bought

    warning you all data loss and 3 third-party programs that you have installed unless there is a non-destructive option in your hp recovery options

    Thirdly try to ask in a fedora forum to solve the problem, he has caused

    http://fedoraproject.org/

    Walter, the time zone traveller

  • Vista does not start, fails to Startup Repair indicating that the version of the operating system is incompatible with Startup Repair tool

    I use a laptop Dell XPS M1330, under Vista Home Premium 32 Bit. The laptop froze, I tried to do a system restore, which did not work. Now the laptop goes into startup each time put on repair. A message window appears saying "Startup Repair cannot repair the computer automatically. Startup Repair window says "Startup Repair could not detect a problem. Diagnostics details say: Root cause found: the operating system version is incompatible with Startup Repair tool.

    I tried to use the Dell Factory Image Restore to restore the system, but it does not end. I get an error message instead. There is no details, it's just a small window with an X and the Word error.

    I also tried to use resettlement Dell DVD, but that doesn't seem to work either.

    Vista does not start at all, not in either safe mode.

    I just ran to the Dell Diagnostics tool, and that is to say that the integrity test of memory has failed... No idea how to solve this problem?

    I'm at a loss and helps woukld be appreciated.

    Hi James,

    Ø are you using the correct version of the Vista disc to run Startup Repair?

    I suggest to run the diagnostic tool memory WINRE mode and check if the memory (RAM) installed on the computer works fine.

    Follow the steps below to start the computer using the WINRE and run the memory diagnostic tool.

    A. Insert the Windows Vista installation disc.

    B. restart your computer.

    C. Si you are prompted, press any key to start Windows from the installation disc.

    Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

    D. choose your language settings, and then click Next.

    E. click on repair your computer.

    F. Select the operating system you want to repair, and then click Next.

    G. in the menu system, SelectMemory diagnostic tool Recovery Options.

    Once scanning is complete, check to see if the problem is resolved.

    Access the link below to learn more about Windows recovery options in Windows Vista.

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

    http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

    If you have several sticks of RAM installed on the computer, you can try to remove one of the RAM stick and check if it works very well. Also, you try to exchange the RAM sticks and check if one of the RAM is originally this issue and if it needs to be replaced.

    Note: If you are not aware of the evolution and swaping the stick of RAM on the computer, it is best to contact the computer manufacturer for help on this and you can do it at your own risk.

    You can also contact Dell support and check if you need to replace any hardware.

    I hope this helps. Let us know the results.

    Thank you and best regards,

     

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Vista does not start, turns to a blue screen error 2203

    original title: Windows Vista does not start, turns to a blue screen HELP PLEASE!

    Help, please! So I'm panicking here, just yesterday, I tried to download the update to Itunes, and it did not work. So I followed the instructions and uninstalled the program first, but one of the applications does not uninstall correctly. I thought I could just substitute with the update and replace. The error code was 2203.

    So I thought it was right after the download all itunes thing, and when I came back to check on the download, the screen turned to this black thing with words on this subject. I decided to force closing down by pressing the power button. Now everytime I turn on the computer, it leads to the screen saying 'windows is loading files', then this blue screen with a very large arrow (the mouse). I tried pressing the F11 key and stuff, but I have no idea what to do. PLEASE REPLY AS SOON AS POSSIBLE, REALLY NEED A COMPUTER!

    "I tried to do the second option, because the first really helped."

    Something works, or it doesn't work regarding: "really helped."

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    I'm sorry, but I don't understand where the procedure of ISO part 2 stops.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    You may be interested in this:

    Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

    They will tell you how to do this.

    Every computer manufacturer has their own way of making recovery disk/s.

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows VISTA does not start - shows a green bar horizontal scrolling forever, safe mode stops at crcdisk.sys

    Windows Vista does not start.  It shows the horizontal scrolling green bar with microsoft (c) and then goes to a black screen with the mouse arrow that moves. Start in safe mode loads the drivers to the extent of the crcdisk.sys but meet once again at the black screen with the mouse arrow.   Have not the SATA drives connected.  Impossible to get to the command prompt to delete all files.  No work from safe mode.  Restore computer does not work.  I have looked at other posts regarding the renaming/deleting files, but cannot get to the command prompt to resolve this problem.  The computer is less than 2 years.

    Toshiba Satellite A205-S5831, dual processor running.  Running Windows Vista BASIC.  Hard drive seems to work, lighting, well working properly, no error at startup.  No perifpherals or a mouse, or a USB attached.  Disabling USB does not boot.

    Can someone give a help?

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

    There is no Vista free download legal available.

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > find the latest Vista drivers for it > download/install the

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows Vista does not start - only Safe Mode

    Hello

    Windows Vista does not start. Starts only in Mode safe. Same system of recovery is not backward by date

    Press F8 all turn the laptop.
    Choose the first option: by computer repair and try to repair the operating system automatically.

  • Windows Vista does not start upward, with success since the closure complete

    Hello world

    I actually had this problem for a long time, but I'm just now to a point where I'm ready to take a lead in fixing it.

    I can't identify when it started, but Windows Vista does not start upward, with success of a full stop. He gets to the screen where, in general, the green bars will travel across the screen, but the green bars will not come. The screen looks dim and sits there, with the text of the copyright of Microsoft Corporation. So, after not having on the mound, I have to manually shut down the computer by holding down the power button. When I try to start again, told me to go through the Startup Repair tool. If I jump the repair, I just have to meet the same problem - a computer that will not go beyond the screen "green bar".

    So, I do the Startup Repair, and told me what I do for the restoration of the system. Windows starts normally after the restoration.

    Don't forget, this happens from a full stop. To remedy this, I just never completely shut down my computer. I left running and back just at the beginning of the day. The computer may start restart, it just may not start with a full stop.

    Given the start of repair takes, literally, around 4 or 5 hours of full stops complete, accidental or power outages are a nightmare, I am obliged to wait 5 hours to get access to the computer. Fortunately, I have my laptop.

    If someone has encountered this? I saw people talking about the loop of startup repair, but that's not the point, I have. I have yet to see any discussion of my specific problem.

    Thanks in advance!

    Hello

    4-5 hours to do a startup repair is too long.

    Often you get better results if you a using a DVD of Microsoft Vista startup repair.

    Jose how to do a startup repair, etc. using a DVD of Vista from Microsoft

    Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

    Here is the guide to repair Options using a Vista DVD from Microsoft.

    If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

    http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

    Table of contents

    1. Overview of Windows Vista repair options
    2. How to perform an automatic repair of Windows Vista using Startup Repair
    3. Advanced Tools Overview
    4. Conclusion

    If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

    Unfortunately, you have to buy it.

    Here is a link to it:

    http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

    See you soon.

  • Two disks hard two Vista does not start

    Two disks hard two Vista does not start

    For large computing needs, I combined two software Vista, two memoirs, two hard drives, the work display card and sound card.  A hard disk as Primary Master IDE has perfectly my current programs, Office 2007, data and functions.  The SATA drive has the space of files I need and a disabled Vista.  The computer starts with the SATA HD Vista does not work and stops at a missing file.  I do F12 and select the hard disk IDE startup.  I tried several solutions, for example: Startup Repair, recovery disk, installation DVD of Vista, repair, BIOS F2 re boot choice and sequence, does not list the IDE drive as a choice, tried to remove the disabled Vista, all the solutions in the forum, Ms.  Not solved.

    For months in the auto-update feature, the two .NET Framework 1.1 and 3.5 will not install.

    Please tell me solutions to correct these errors for .NET and start-up.

    http://support.Microsoft.com/default.aspx/KB/326246

    'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/314060

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

    Burn a CD or DVD

    If your computer is equipped with a CD or DVD burner, you can copy files to a recordable disc. This process is called burning a disc. By default, Windows Burns discs in the active file system format, but you can also choose to burn discs in ISO image format.

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows Vista does not start at startup

    I have a Dell Inspiron 1525. My wife uses mainly the laptop for access online, certain professional activities (Word documents, spreadsheets) - nothing major.

    Today, after starting the Dell system, the laptop would not boot correctly. It would have wrapped after the Windows flag and never completely boot. What I have done so far to try (unsuccessfully) the question of setting:

    (1) launch Startup Repair (recommended) - no resolution

    (2) Ran Dell Diagnostics - received error code: 2000-0333

    (2) selectable repair your computer from the Advanced Boot Options and attempted a system restore - it has failed because of an i/o device error (0x8007045D)

    Not sure which is precisely the problem. Please help to troubleshoot and resolve this problem.

    Thank you

    D

    Hello

    Follow these steps using the Dell diagnostic process, especially by pressing F12 at startup.

    http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=266787

    "The computer does not start in Microsoft Windows Vista"

    http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=DSN_343119&isLegacy=true

    If Dell information does not resolve the problem, you may need to reinstall the operating system.

    See you soon.

  • Windows Vista does not start. I can just buy the upgrade to Windows 7 to fix this or do I have to purchase the full version of Windows 7?

    update helps... Difficulty helps lol

    I have vista Home premium, but does not start it tells me to put my disk installation and repair process. can I buy windows7 upgrade or should I buy the full version, I'm not going to do...? I got my pc checked thourghly and everything is running perfect

    Please use the Vista system repair and recovery forum to fix your departure upward.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system?page=1&tab=all

    Yes, as long as Vista is still installed on the hard drive you can use a copy of Windows 7 upgrade to upgrade your computer but you will need to boot the computer with the Windows 7 dvd and perform a custom installation.  Which will remove all your programs and data so there will be very practical backups.

    The best option is to repair Vista first.

    Before dismiss you the idea of buying a copy of the full license of Windows 7, remember that it would be transferable to a new computer much more easily that an upgrade copy is.

  • Vista does not start

    I have Vista Home Basic 32-bit and, recently, explorer.exe crashed and so I rebooted the system, however, after the bios shows up, what I see is a command prompt, type cursor and the operating system does not start at all. I already pushed F8, but what annoys me is a menu where I choose what boot drive, although I have only 1 hard drive. No help here please?

    Hello
    Since it is in any start-up situation, I suggest you to contact the manufacturer for further assistance.

    It will be useful.

  • Windows Vista does not start in normal mode

    My Windows Vista-based computer does not start successfully in mode noirmal upward. I restart and it is very slow. Finally I can connect and my come almost all my desktop icons. Almost. At this point, it seems frozen. Left click and it becomes totally frozen, including the white frozen screen Milky wit the icons in a blurred background. At this point, I can nothing but disable it at the tower. Restore the system to an earlier point has failed. Any ideas?

    See...

    My computer is slow!

    http://miekiemoes.blogspot.com/2008/02/help-my-computer-is-slow.html?

    List of troubleshooting for a slow computer

    http://www.bleepingcomputer.com/forums/topic44694.html>

    What to do if your computer is running slowly

    http://www.malwareremoval.com/tutorials/runningslowly.php>

    04/12 / 1107:23: 14:00

  • Windows vista does not start try the recovery disk and nothing

    I have a pavilion hp a1712n with windows vista starts not tried the disk recovery and nothing, it sounds like it is stuck in mode 'sleep'. I can hear it loading but it dosnt take the cd/dvd drive, I tried unpluging the drive to see if it will continue to load, but it didn't. I can not use the key to go into bios Board or something, all ideas given lose don't are not important computer been gave me this problem, so if there is something that I can do but personal files will be lost is very well thank you all

    Hi scoobydoochick,

    1. what recovery disc do you have?

    2. you receive an error message?

    3. you see the computer manufacturer's logo while you start the computer?

    Looks like that there are some hardware failure on the computer that is preventing the computer from starting.

    Will need you a Windows vista installation disc as recovery are different from the install disc and restore disks are created by the computer manufacturer, we are not aware of its functions.

    Once you get the Windows vista installation disc, that you try startup repair by using the link below or take the local computer tech shop and the material tested on the computer.

    What to do if Windows does not start correctly

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Vista does not start, go to restore, then boots

    Vista operating system does not start.
    Go to the system restore, detects a problem the boots to the top.

    Go to the system configuration, Event Viewer, and it constantly shows the following critical errors.
    ID: 6 mistakes of ACPI system 3
    message: IRQARB ACPI: ACPI BIOS does not contain an IRQ for the device in PCI Slot 12, function0, please contact your system support tech provider
    also in the 11 slot and slot 9

    ID: 5007 WerSvc 1 error
    Message: Or could not read registry key s-1-5-18 printers connection

    What I did:
    Reset the BIOS, recovery set points Changed a number of times

    Still have the problem.

    What should I do now?

    Hello

    You did changes to the computer before the show?

    Method 1
    I would say that you disconnect all external devices except the mouse and keyboard and check if are able to boot to the desktop.

    Method 2
    Step 1:
    I suggest to start the computer in safe mode and check if you are able to boot to the desktop.

    Start your computer in safe mode
    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Step 2: If you are able to boot to the desktop, then I suggest you perform the clean boot and remove the program that is causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

    Method 3
    If you are not able to boot to the desktop, even in safe mode then do the Startup Repair.

    Startup Repair: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

Maybe you are looking for