my vista operating system continues to run in a loop, saying: Configuring updates 3/3 0 full. Cannot start in safe mode or the other amounts to the same configuration problem

Similar Questions

• __i have the vista operating system, do we Media Player I have and where can I find this info cannot access online stores

  woulld want to download streaming radio

  Hello

  ·         What happens when you try to access the store online?

  Windows Vista comes with Windows Media Player version 11 pre installed. To check the version, you can

  (a) open Windows Media Player

  (b) click theHelp tab at the top left of the screen.

  (c) in theHelp list, click Windows Media Player, and that should open a window of information, including the version of windows media player.

  You can not download Streaming radio on your computer. You can use Windows sound recorder to record the radio or use for third-party applications.

  http://Windows.Microsoft.com/en-us/Windows-Vista/record-sound

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista 32, remained after the failure of the update, returning for hours, cannot start in safe mode same problem

  cannot go to last good config known, cannot restore only previous work, no restore point? all I can do is to get a prompt back from the Panel sysrestore, all files are on the disk, I tried running kasperski rescue disk,

  What should I do

  Hi davecuk1,

  1. you receive an error message when you start the computer?

  2. do you have security software installed on the computer?

  3 have you disabled the system restore on the computer?

  I suggest that you do the startup repair using the Windows vista installation disc and check if it helps.

  Check the link below for how to launch startup repair using the installation disc.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  I hope this helps!

  Halima S - Microsoft technical support.

• How to fix error with vista service pack 1 - cannot reboot in safe mode or regular

  tried to download vista sp1 - cannot start in safe mode or regular - enabled more than an hour to download - black screen-a chosen start normally - tried to start - at least 35 min. with the screen - in the suite! oxco1a001d! 28802/95712-{Registry\machine\components\DeriveData} - then tried to start in safe mode - says something was wrong - ran progran details - leaving - help, please4

  Hello

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and read this:

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• I want to continue to use my current Vista operating system, but I forgot to turn it off before changing the parts of my PC. Now, whenever I try to turn it on, it says that the license is already in use.

  Transfer of license with a twist

  So I've recently upgraded to a new system... Virtually everything has been replaced - the motherboard, RAM, graphics card, processor... Everything but my HARD drive. I want to continue to use my current Vista operating system, but I forgot to turn it off before changing the parts of my PC. Now, whenever I try to turn it on, it says that the license is already in use.

  Is there anyway for me to be able to turn it on for my new rig? Thank you.

  If you have a retail copy of Vista, you must activate by phone.  Click Start, type "slui 4" and press ENTER.

  See http://support.microsoft.com/kb/940315

  If your copy of Vista is preinstalled on your computer, you can't use it with the new motherboard and you will need to purchase a copy of the license full of Windows.  Most of the editions of Vista out of support in two months so consider Windows 7.

• I'm having a problem with my Windows Vista operating system. Problem started on 19 February 2011.

  I'm having a problem with my Windows Vista operating system. I have a Toshiba Satellite A135-S2376. Problem started on 19 February 2011. Computer continues to display Windows Explorer or Microsoft Windows has stopped working messages. Cannot run all programs, sharing disk cleanup, System Restore. Cannot download IE 9. Help, please! For example: tried to run MP3 Rocket he was trying to load & then a message appears at the top that States platform Java cannot run or something to that effect. Basically, I can't run any program that needs to use Microsoft Windows.

  Hello

  You can try to do a system restore before this date

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware scan

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• I have the Windows Vista operating system. Whenever I connect my computer, I get two pop ups on the taskbar. One is jucheck.exec and another is updates of Java.

  I have the Windows Vista operating system. Whenever I connect my computer, I get two pop ups on the taskbar. One is jucheck.exec and another is updates of Java.

  I have no way to uncheck the premiera. I have only two options, restore or close. With java, I opened the properties and click to remove the check mark from updates, you click on apply and then clicked on ok, but he still continues to appear you have tips on how can stop these pop ups?

  Hello

  I would like to inform you that Jucheck.exe is the process that runs automatically when the Java Update tool is activated. Jucheck.exe usually checks the Internet for the software updates available and invite you to install them to keep your updated program. If you prefer to search and download the Java updates manually whenever you want, disable Java Update automatic tool disables and removes Jucheck.exe

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Download XP Home on computers than rn on Vista operating systems

  I bought a Lap Top that runs on the Vista operating system.  I have my work on a Dell under XP Home machine and want to put the whole package of XP on the Lap Top which has Vista.  I was told that it was impossible, that it can only be charged on a unit of Dell.  I have the XP original software still sealed and never loaded on a computer, so I don't think I would be breaking the laws.  The company I worked for arrangements made with Dell for employees who worked at home to buy hundreds of computers and had them loaded with all the software that they require.  This is the package of XP Home and Dell sent the discs sealed to buyers.  I was one of the buyers and have a new series.  The problem is that it's going to work or Vista shot of it.  I am a novice and you worry mess up Vista and everything I have on the computer.

  Someone, please ME SAY it IS OK AND HOW to LOAD it.

  Windows, any version, does not come with spreadsheets or excel from MS Office, which contains.
  Win is an operating system only, it contains no other software
  If you want to MS Office, or any other software, you must purchase it

  The recovery disks provided with your PC by PC manufacturer are related to this PC, you can't use them on another PC, no, you can't use your Dell disks on anything other than the Dell pc, they were provided with

  The only thing that you can transfer from one PC to another are your data files and all commercial versions of the software that you have purchased

  If you buy a PC with MS Office, while the desktop version is also related to this PC, it has been installed previously on and cannot be transferred to another PC.
  You cannot transfer commercial versions of the software that you have purchased a new PC

  In your case, it would seem that your old Dell PC, available with Windows XP home also had MS Office, none of them can be transferred to a new PC

  And no clip has not transferred to winxp home of your Dell to your Compaq, which would have been impossible

• I would like to install Windows XP on my computer and get rid of the Vista operating system. Can I do this? I only have 512 MB of Ram and 32-bit processor.

  Windows XP instead of Vista.

  I would like to install Windows XP on my computer and get rid of the Vista operating system.  Can I do this?  I only have 512 MB of Ram and 32-bit processor.

  Hello

  There are a few things that you would have to do to install XP instead of Vista:

  1. contact the manufacturer of your computer and see if the XP drivers are available for your computer model to make sure that XP has worked properly in this regard.

  2. If the XP Drivers are available, buy a XP disk operating system / license. Try local computer repair shops because Microsoft sells more than XP and online sale buy you pirated copies can cause. Be very careful.

  3 XP runs with 512 MB of RAM, although a little slow by today's standards.

  4. do a clean install of XP. Make sure that all your data is backed up as the hard will be cleaned of everything during the Installation of XP.

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  Here is some information that you would like to learn more about improving the performance of Vista using ReadyBoost, you have only the minimum amount of RAM to run Vista:

  http://www.bleepingcomputer.com/tutorials/using-Windows-ReadyBoost-to-increase-performance/

  See you soon.

• You are able to use the CD of Windows Vista operating system on a laptop that has Windows 7 Home on it to use the Interface of Windows Vista?

  My situation is that I have a laptop that is a Windows 7 machine. I have a need where I'm considering purchasing a CD of Windows Vista operating system. It comes to be able to use the Interface of Windows Vista? I have a technical support of experience under my belt and I remember that if you need to have a different operating system available that you can use this operating system without installing it on your system.

  I really could use a version of Windows Vista now my educational purposes. My current computer has Windows 7 home running on it right now. Could you or someone give me Options to work with. I'll look forward to your response.

  Thank you

  Gary

  Q: "you are able to use the Windows Vista OS CD on a laptop that has Windows 7 Home above to use the Interface of Windows Vista?"

  A.  No.

• I can't backup DVD for Windows Vista operating system due to the error of 0x8007001B

  I can't finish a DVD upward on my Windows Vista operating system.  This is due to an 0x8007001B error code.  I was unable to complete the fix to services.msu

  Hi mine,

  This isn't a question of MSE - there is a problem with Vista or your computer or your software backup or your DVD player or its drivers or something else. We are not the right people to answer your question and give you the best possible options and solutions - you have to talk to the experts.

  Please repost at: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system?page=1&tab=all&tm=1304884961900 where specialists who understand and focus to help with these issues will be more than happy to help you.

  Although not my area of expertise (and you're welcome to ignore it and just after to the other forum), I did do research in any case and believe that the problem involves the corruption on your hard drive (although I could certainly be wrong - it is more likely to be the case if the full error message includes "drive cannot find sector requested" but you don't get the full error message, so I don't know). To try to fix it, if that is the problem, follow these steps:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  While in the command prompt, type chkdsk /f /r and enter and let it run. They tried to set itself to run at the next reboot. Answer Yes and restart to run the program. It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.

  If this does not work, test better clean your hard drive. To test your hard drive, check the manufacturer and try to diagnosis HD (http://www.carrona.org/hddiag.html) or this test: hard drive diagnostics tools and utilities (storage) - Corp of TACKtech (http://www.tacktech.com/display.cfm?ttid=287). If it passes the tests, there's probably nothing wrong with it and you must do to the other support forum. If it fails, which include in your post on the other forum and let them advise you how to proceed.

  I hope that the above solves the problem. If this isn't the case, I am confident, they can help you in the other forum, because that's what they specialize in. It would help if you posted the message Word for Word that is accurate and complete, including all codes. In addition, it would help them if you explain the difficulty you mention services involving (a link to the site where you found the solution or at least what exactly you did and what has happened or not happened when you tried). And if you've tried my suggestions above, include the results in your message (so they don't ask you to do it again and will be able to exclude).

  Good luck and best wishes!

• How to use a scanjet 2200c with a pc using the Vista operating system?

  Without a positive response, I can't continue to use my scanner because it is not my intention to give up on Vista operating system. At least for the moment. Thank you. Bye bye

  Sorry to say this, but it seems that your product is not supported by Windows Vista. See the document below for more information.

  http://support.HP.com/us-en/document/c01296655

• MCAFEE VS. NORTON 360 TO PROTECT THE VISTA OPERATING SYSTEM

  I have a Qosimio Toshiba computer and it came with trend Anitvirus software for the first year. I have the Vista operating system. I want to either update Mcafee or Norton 360. What is the best for my computer and do I uninstall the antivirus software of original Trend before or after the installation of the new software, and how do I do?

  Hello

  Frankly, I would not use all three, and never you have on the machine now that you must
  Delete (so you have only a major antivirus on the system) do not forget to use the removal of their creator tools
  or anyone who can leave problems using scraps.

  Download replacements, but do not install until after the removal of those present and restart.

  For any need to use this method:

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN

  Instructions/TrendMicro removal tool
  http://eSupport.trendmicro.com/1/How-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspx

  How can I uninstall my Trend Micro program removal tools fail?
  http://eSupport.trendmicro.com/pages/how-do-I-uninstall-my-trend-micro-home-and-Home-Office-program-if-the.aspx

  ========================================================

  Here's what I use and recommend: (all are free and offer exceptional protection)

  Avast and Prevx proved extremely reliable and compatible with everything I threw at them.
  Microsoft Security Essentials and Prevx have also proven very reliable and compatible.

  Avast Home free - stop any shields is not necessary except away from Standard, Web and network is working.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (Sometimes you have to temporarily turn off with the little icon to the left of the + bottom right of IE)

  Avast - stop home - free - all shields you do no need except leave Standard, Web and network running.
  (Double-click the blue icon - details look OK. - upper left Shields - those that you do not cancel).
  http://www.avast.com/eng/avast_4_home.html

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and that would be unusual with
  Avast and Prevx running except a low occasional (not much), updated cookie and then run it as
  a scanner. I have a lot of scanners and they never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• HP Pavilion a6712f w / HP w2207h monitor. screensaver locks the Vista operating system. How to cancel a blocking?

  HP Pavilion a6712f w / HP w2207h monitor. Screensaver locks the Vista operating system. I have to cut the full powers to restart the computer. What's wrong? Checked with AVG. virus system. HP system checks OK.

  Hello

  In the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.  Restart the PC.

  Kind regards

  DP - K

• PDF can be installed on a computer with a Vista operating system?

  PDF can be installed on a computer with a Vista operating system?

  Please check:

  • https://www.Adobe.com/support/products/PDFs/adobe_products_and_windows_vista.PDF
  • Run Acrobat on Windows Vista

  Concerning

  Stéphane