My Vista pc does not work properly, getting the error 1097

Similar Questions

• Adobe creative cloud installation does not work. Get the error code 207. All solutions?

  I recently got the cloud creative adobe and so far I'm not impressed with her. The adobe installer will not download the creative application of cloud. It keeps freezing for a minute and gives me this error message.

  And if you tell me that if I am on a managed network and I need to be wired connection to make it work, I am. I use a wired connection and my internet works perfectly. And I also tried disabling my firewall, antivirus software, basically everything what is perhaps perform the server. Still does not work... I tried everything and nothing works.

  Got it to work, it seems that it is bitdefender, my anti virus program sends me questions. However, I disable the antivirus program trying to get the installer to work and I still get the error. So I just straight up to uninstall bitdefender on my pc and it seems to work perfectly. Hope this helps anyone who has the same problem I did.

  See you soon!

• Keyboard does not work properly on the Satellite P100-465

  Hello
  Toshiba P100-465, I bought last month and discovered that if you press any key sound (especially the SPACEBAR or enter) between the upper right, it does not work.
  I never saw such a problem anywhere in any laptop. Please confirm if this is the case with all or should I get my keyboard replaced.

  I read this forum for a long time and I have strength to find a lot of comments about it. Because of that I think he cannot be serious and I recommend you contact the partner of service authorized in your country.

  By the way if you press the keys correctly (around using the button) I see no problem there but service can check properly and if problem described is a problem with the hardware keyboard will be replaced free of charge.

  Bye and good luck!

• Vista home prem (KB967723) sp2 security update does not install and get the error code 80073712

  I tried to fire disableing walls, with work, I get all the way to installation and the i get the error code 80073712

  http://support.Microsoft.com/kb/957310

  «Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0 x 80073712" "»

  Method 1: Run (Checksur.exe) system update readiness tool

  1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

     For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:

     947821 (http://support.microsoft.com/kb/947821/) Description of the update readiness tool for Windows Vista system
  2. Try to install updates again.

  Note After running the tool, the Checksur.log file is stored in the following location:

  %SystemRoot%\Logs\CBS

  In a default installation of Windows Vista, is the Windows directory.

  If this method does not resolve the problem, go to method 2.

  Back to top

  Method 2: Install Windows Vista Service Pack 1 if you have not yet installed Windows Vista Service Pack 1 (SP1), visit the Microsoft Download Center and then download and install Service Pack 1. To do this, follow these steps:

  1. Quit all programs, and then click on the following link:
     http://www.Microsoft.com/downloads/details.aspx?FamilyId=f559842a-9c9b-4579-b64a-09146a0ba746&displaylang=en (http://www.microsoft.com/downloads/details.aspx?FamilyID=f559842a-9c9b-4579-b64a-09146a0ba746&DisplayLang=en)

     Note Click the option to download on the download page, click Save, and then save the download to your desktop. When the download process is complete, click run to install the SP1.

  2. Restart the computer.
  3. Try to download the updates again.

  If you can't always install updates, go to method 3.

  Back to top

  Method 3: Perform a repair of Windows Vista installation when you perform a repair installation, which restores the current installation of Windows Vista to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows Vista.

  To perform a repair of Windows Vista installation, follow these steps:

  1. Restart the computer.
  2. Insert the Windows Vista DVD into the DVD drive of the computer.

     Note If Windows does not automatically detect the DVD, click on Start, type: \setup.exe in the Search box, and then click configuration in the list programs. Then, click install now.

  3. Click connect to get the latest updates for installation (recommended).
  4. Insert the product key if you are prompted to do so.
  5. Click to accept the Microsoft software license agreement.
  6. On the screen which type of installation you want , click upgrade.
  7. Once the installation is complete, restart the computer, and then try again to install updates.

  See you soon.

  Mick Murphy - Microsoft partner

• Urgent - the sound recorder does NOT work after getting the window system 7 (64-bit)

  I have a problem with the sound recorder. After that I got the system with Windows 7 (64-bit), the sound recorder does not work. It's very urgent because I need to procticing my English pronunciation and the test day is coming.

  Please would you give me help? I really appreciate!

  Thank you very much.

  Eleanor

  A prompt by right clicking and select "Run as Administrator"
  and then at the command prompt, type: chkdsk /f r, then press the Enter key.

  If you are asked to plan the volumn to check the next time that the system restarts,
  Enter: y

  If you know the manufacturing of your hard drive you can also download their diagnostic software.

  Another use: SpeedFan has an online health analysis function
  (SMART tab) for hard drives. It will show how your disks
  compared with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  ========================================================================

  Run the SFC/scannow command. This will check and repair if necessary all of the critical Windows system files.

  Click on start / all programs/accessories then
  Right-click on the command prompt option and select "Run as Administrator".
  (or "Safe Mode" open a command prompt)
  At the command prompt, enter: SFC/scannow

  Windows 7 - order SCANNOW SFC - System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
  http://support.Microsoft.com/kb/928228

  J W Stuart: http://www.pagestart.com

• How to remove the part of an object grouped several using a shape (Pathfinder does not work, cannot get the knockout groups to work)? Kind of like the opposite of a clipping mask.

  I want to remove the portion of these legs inside of this graph, because a white circle solid at the Center intensifies the effect of the spiral.

  Background, the spiral is a mixture of the people flying around in a circle. The circle is then copied and turned several times. I have not developed the appearance again.

  There must be an easy way to do it, but I can't use the Pathfinders, the opacity mask, knockout groups, and make simple layers does not work. I just want to axe the legs of these easy people!

  

  

  

  This is not correct

  

  I do several models and want to find a way to make it easy and fast!

  

  Thanks to you all!

  Emmanuel,

  If I (put) correctly, you should be able to get the opacity mask to work as follows:

  Select (only) the White path and the mixture and then in the transparency palette flyout on create with unchecked Clip opacity mask and mask invert checked.

  Who must hide the inner part of the mixture corresponding to the white circle and let the front remains visible oin the background (circle and all that.)

  .

• Click right does not work properly in the Microsoft Sidewinder X 8 mouse

  Original title: microsoft sidewinder x 8

  Hi, I had a sidewinder x 8 micrsoft. I love rly. but since yesterday I have a problem strange rly. If I click on the right button of the mouse the mouse starts clicking on itself. Click, click, click, click. then I click right button again and it stops. It's rly boring. I went on a normal USB mouse and it works if this isn't a problem with win 7.

  yesterday, I've updated like everything.

  NVIDIA, win7, chipset intel, new mouse and keyboard software microsoft, update virusprogram and scan, firewall updated.

  the first update was the new nvidia update. 1 hour later the problem, after that I've updated everything.

  Hi PatriceA,

  Thank you for joining Microsoft Community where you will find all the necessary information on the windows!

  Click right does not work in Microsoft Sidewinder X 8.

  Check the mouse in another computer to make sure that this is the problem with the device.

  If the problem occurs with other computers as well, then I suggest allows you to obtain assistance at the Microsoft site for technical support for hardware problems.

  See the site:

  http://www.Microsoft.com/hardware/en-us/support/troubleshooting

  You can also consult the site:

  http://www.Microsoft.com/hardware/en-us?WT.mc_id=hwvan

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• computer does not work properly after the update, because the screen is black.

  Advice please! :-(

  After an update there about 2 months, my computer has never worked properly after that I turned it back. My windows start page is longer there. My screen is black. The words are only in white and fluorescent yellow...

  The only way I can go online to find Norton (is always at the bottom of the black screen) and go to help. I can get a search bar like that. Almost as if this black screen hides everything below.  Computer is 13 months old.

  My internet provider says it isn't them. Gateway said it's not my computer so idk what happened after this update.

  Any advice would be so appreciated.

  Thank you.

  Hi Patty,.

  Welcome to the Microsoft community. I would be grateful if you can answer these questions.

  1. You have installed the latest drivers for Windows 8?
  2. What is the model number for Gateway computer?

  If you get a black screen after upgrade to Windows 8, it might be due to an outdated or incompatible graphics card driver. Update to the latest version of the display driver should fix this.

  Try to remove all external devices connected to the computer and then try to start the computer and check if it works. Follow these methods and check if that helps:

  Method 1: To resolve this problem, update the Gateway website. video card driver

  Step 1: Check out these Microsoft items for additional reference:

  Download and install the drivers

  http://Windows.Microsoft.com/en-in/Windows-8/all-drivers

  Step 2: If you are not able to find drivers for Windows 8 to HP support. Try to install the graphics drivers in compatibility mode and check:

  Download your applications and devices in Windows 8.1

  http://Windows.Microsoft.com/en-in/Windows-8/get-apps-devices-working

  If the problem persists, proceed to the next method.

  Method 2: I suggest to follow the suggestions provided in this Microsoft KB article and check if this can help:

  Windows 8 starts with a blank screen after a standard or hibernation

  http://support.Microsoft.com/kb/2756559/en-us

  See also the suggestion provided by Scott (owner of Forum) from this thread and check if this may help.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/black-screen-when-logging-into-Windows-80-or/93bb4530-C31C-4a2d-91e6-7ec2fc420379

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Equium A60 does not work properly with the Logitech Quickcam Fusion

  If someone managed to use a webcam Logitech Quickcam Fusion with an Equium A60?

  I installed the latest available drivers and software and most of the time it screws right up to the operation of the computer. He ends by crashes so bad that I can't recover even using Manager Windows task! If I leave the USB cable connected to the PC, 9 times out of ten, it won't boot into Windows, until I have remove lead :(

  I installed the same software and drivers on my desktop PC and the device works very well every time and the boots OK with the camera connected to a USB port.

  Two computers use Win XP with SP2 and all updates.

  Hello Bill

  Do you have problems with the USB ports if you are using other devices? I really don? t know what can be the problem. Check the Logitech SUPPORT PAGE

  Maybe you'll find some tips there.

• [POWN] does not work properly in the property management HFM

  Hi all

  Can someone help me with the calculation of the property in HFM-> [POWN].

  In fact, I have about 400 Company in the hierarchy of entities some owners direct + indirect.

  Part of this hierarchy is like that.

  B 100% owned

  B C held at 100%

  So, I created the hierarchy like this

  AConsol

  A

  BConsol

  B

  C

  When I check [DOWN] and [POWN] in the property management:

  BConsol entity [there] and [POWN] for every 100% B & C

  Entity AConsol has [DOWN] and [POWN] 100%, but should [DOWN] BConsol null and [POWN] BConsol 0%.

  
  

  I am curious to know how [DOWN] AConsol to BConsol is not calculated (null) and [POWN] becomes 0%?

  
  

  I thank all

  Best regards

  Hilal
  

  Hi Igor,.

  Thank you for your response.

  I find the cause already.

  This is due to I'm wrong define the holding company for the Consol entity in the entity of the hierarchy.

  Thanks to and best regards,

  Hilal

• Commit_form does not work properly in the menu

  Dear all,
  
  I am facing a problem caused by commit_form. I have a few forms that and a menu joint module window MDI, in the menu there is an element RECORD, code below.

  declare
  frm_module varchar2(300);
  begin
  frm_module:=get_application_property(current_form_NAME);
  go_form(frm_module);
  if :SYSTEM.FORM_STATUS='CHANGED' then
  do_key(COMMIT_FORM);
  else
  message('No changes to be saved');
  end if;
  end ;

  Save the item menu to commit changes, but first she shows the default form message no changes to be saved and then the default message complete transaction forms...
  How can I avoid this confusing message and I want to when if some changes are applied on a form then the button allows to save these other changes not to say no changes to be saved
  Thank you!

  Well, as you discover - forms keeps track of changes in each form separately. In order to activate your changes form validation, you will need to return to the form with changes constantly. Knowing what form has changes, it is for you to keep track of your application. However, in your username closes every form they will be asked to save if there are no changes.

  If you do not want the "no modification to be applied" message to display, you can intercept this message in the On-Error trigger and just ignore it. For example:

  /* Sample On-Error Trigger */
  BEGIN
    IF ( ERROR_TYPE = 'FRM' AND ERROR_CODE = 40405 ) THEN
      NULL;
    END IF;
  END;
  

  Craig...

• System Restore does not: Windows XP, getting the error "system restore has not initialized because windows stops."

  "System restore has not initialized because windows stops."

  This message keeps me from using system restore any previous date, I chose. Restore fails every time.

  Window shutsdown too early. What can I do to prevent this?

  Try to boot mode safe (the F8 key as the computer starts from the tap) and run system restore from in Safe Mode.

  HTH,
  JW

• I have again to win 8 pc. PS 64-bit does not install correctly. get the error update failed

  I install on a new pc win 8 PS CC. I think it installs, because I can open it. But on the CC site, when I press the button to update, the update fails.  told to try again. fails. I have all the drivers to date and updates of windows 64-bit win 8.

  I'll answer my own question in the hope that it helps someone else. I had the problem immediately after installing PS CC.  Once I restarted the computer and tried again, it worked.

• Microsoft Wireless Desktop Keyboard/Mouse 6000 V2 does not work properly.

  Microsoft Wireless Desktop Keyboard/Mouse 6000 V2 does not work properly.  The mouse does not allow me to use the wheel to scroll down to option and when I look at the drop down list, it does not keep list open.  It opens and closes the list immediately. He continues to return the list to the top of the drop-down list.  I checked the batteries in the keyboard and the mouse (replaced) resync'ed the two keyboard and mouse ports changed the receiver performed in and checked for update on both keyboard and mouse and have restarted my computer several times and it still does not work properly. I bought this Office Microsoft Wireless Keyboard and mouse 6000 V2 there are three 3 months and he can't take back to store because it has a warranty of 30 days of the store.  Help.

  Try it on another machine to ensure that it is not the lack of equipment.

  And make sure you have the latest drivers/software installed for him.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Problems with my sound doesn't play not even though the settings say that the audio does not work properly

  recently I went on vacation... sound computer works very well before I left. Came back, and now the sound does not work.  I checked all the settings and it says everything is working. I've done some research and there was only one window to come when I rebooted that says a file with the extension dll is not found.  So I restored by computer back to before I left on vacation, but still no sound.  No pop up with the dll is not found though.  I went in the "maintenance" section and found it seems to be a few questions audio below is the scheme which is the filler. Hope this is enough information for assistance.  said the task of event 20 116.  I have an ACER one with windows. the computer has HDMI dolby and realtek.

  -

  -

   

    20

    0

    4

    116

    0

    0 x 800000000000000

   

    3490

   

   

    Microsoft-Windows-Audio/PlaybackManager

    LorrainesPC

   

   

  -

    3

    48000

    fake

   

   

  Judy Hello,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand you have a problem with the sound does not work properly in the computer even if the settings say that the audio does not work properly.

  Certainly, I understand your concern and will try my best to help you.

  I appreciate all your efforts really to try to solve this problem.

  This issue would have intervened if the sound card has went wrong in the computer or audio drivers have been corrupted.

  I would suggest trying the following methods and check if that helps.

  Method 1:

  I suggest you to refer to the procedure described in the article below and check if it helps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: The above article will help you identify and solve its current problems in Windows, including no sound from your speakers or headphones.

  Also try to install the latest drivers from the chipset in the system and check if it helps.

  If the problem persists, follow method 2

  Method 2:

  How to use the tool File Checker system to fix missing or damaged system files, please follow the steps in the link provided below.

  https://support.Microsoft.com/kb/929833?WA=wsignin1.0

  Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article explains how to run the tool (SFC.exe) System File Checkerto scan your system files and to repair the missing system or damaged files from Windows or Windows 8 8.1. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.