my volume control on my taskbar does not work... why?

Similar Questions

• the volume on my laptop lenovo does not work

  the volume on my laptop lenovo does not work, I ran the troubleshooting but he days my driver does not work properly, I have uninstalled/reinstalled but still have the same issue - no volume. everything I've tried has not worked. I can't put the volume up and down but always the same volume no matter what I try! Could someone please!

  Hello

  1. you receive an error message?

  2 did you change on your computer before this problem?

  3. what operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Follow the suggestions and see if it helps.

  Method 1

  You can follow the steps and see if it helps.

  (a) right click on the Volume icon in the Notification area.

  b) click on tab reading.

  (c) right click on the box empty.

  d) select Show disabled devices.

  e) right click speakers and select allow.

  f) right click on speakers and go to the Properties.

  g) select use this device from the use of the device.

  h) click apply and OK.

  Method 2

  If it was working fine before, you can restore the computer settings to a date where he worked very well earlier.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  See also:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Sound cards: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/sound-cards-frequently-asked-questions

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• I have acidently deleted my eviroment. now I can not install anything or change my settings in my control panel. Msconfig does not work this is the messege I get: the system cannot find the environment that was entered

  I have acidently deleted my eviroment. now I can not install anything or change my settings in my control panel. Msconfig does not work. Cannot change network settings. This is the messege I get: the system cannot find the environment that was entered

  Hi kotipelto.

  To better understand the issue, we need the following information:

  Are what environment you referring?  What did you delete?

  Let us know if you can start the computer in safe mode and works as expected.

  Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. Boot advanced options, select the menu safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  If you can start the computer in safe mode, perform the system restore.

  System Restore: System Restore to put the computer's system files to an earlier point in time.

  Search the steps mentioned in the link below:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-sytem-restore

   

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• volume and the touch screen does not work

  good so we got our a Vulcan mod VTA1005XBM32. Will be that she locked her self so we had reset his tab/pc, but know its volume and the touch screen does not work. see some convo saying to download something, but I don't really know what to look for. Help, please... Thank you Dorothy

  OT:

  my / Tablet PC

  Dorothy salvation,

  Thanks for posting your query in Microsoft Community.

  I don't understand that the volume and the touch screen does not work and I'll be happy to answer your query. These features require the updated drivers for them work. Let me ask you;

  • When was the last time that the two have worked?
  • Remember to no particular change in the device before the show?
  • Since the touch screen does not work, you are able to use the options settings?

  The device requires the updated drivers for the volume and the touch screen. I suggest to follow the methods below and check.

  Method 1: Run the troubleshooter of material and check if that helps.

  a. type in the right edge of the screen, and then click Search.
  (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click find.)

  b. enter Troubleshooting in the search box, type or click Troubleshooting, and then press or click on hardware and sound.

  c. press or click on hardware and devicesand follow the instructions on the screen. You may be prompted for an administrator password or to confirm your choice.

  Method 2: Update the drivers

  Step 1: Update the driver through Device Manager

  a. press the Windows key + X , and then click Device Manager

  b. expand driver Sound

  c. make a right click driver, and then click Update driver software

  Step 2: Install the Windows updates pending

  To check the updates:

  1. Open Windows Update by hitting on any fly in the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), tapping or clicking on settings, tapping or clicking change PC settingsand then by typing or clicking on update and recovery.

  2. Press or click check nowand then wait while Windows searches the latest updates for your PC.

  3. If updates are found, tap or click install updates.

     Read and accept the terms of the license and then press or click Finish if the update requires it.

  4. Restart the computer for the updates to be applied.

  Step 3: Visit the website of the manufacturer of the device support and install the latest drivers for the sound and touch to Windows 8 for the same model of aircraft.

  You can also check: touch and pen settings: FAQ

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Free trial of Adobe Pro DC installation does not work why?

  Free trial of Adobe Pro DC installation does not work why?  The installation proceeds very slowly and simply makes anywhere between 11% and 40% before I get either a general "Error" message or one that says WebGet failed.

  I use Mac Yosemite and download of Firefox.

  You have downloaded the installer at the bottom of the link?

  Download Acrobat products | Standard, Pro | DC, XI, X

• The Stream.play () method does not work why?

  I want to create an application to switch streams and republish them under continuous flow unique to the remote server.

  In the first step, I tested "Livestream code" of the "Multipoint publishing example" p. 184 of "FLASHMEDIA SERVER 4.5 Developer's Guide ADOBE®" If ns.publish method is used. He managed.

  I try stream.play method now.

  I wrote main.asc code as in the Stream.play example (p. 162) of the 'the ACTIONSCRIPT Language Reference® to ADOBE® FLASH® MEDIASERVER 4.5 server-side", but I have a certain problem despite this.

  I try to spread on my local server (Uri - "localhost/studia") by two customers - OUT and my request for "Livestream" accordingly (with stream name "livestream2") and retraslate it to a remote server by using my "studia" on a local application.

  The connection between two servers (with application "on-line") appears in the Remote Server Admin Consol, but the flow of my local server do not come to her.

  Here's my main.asc script:

  application.myRemoteConn = new NetConnection();

  application.myRemoteConn.onStatus = {function (info)}

  trace ("Connect" + info.code + "\n");

  Respond to all customers

  for (var i = 0; i < application.clients.length; i ++) {}

  application.clients [i]. Call ("onServerStatus", null, info.code, info.description);

  }

  };

  Connect use NetConnection object remote server (the remote server works with other application wery well)

  application.myRemoteConn.connect ("rtmp://RemoteServer/live");

  Estimate of the server data flow

  application.myStream = Stream.get ("livestream");

  application.myStream = Stream.get ("livestream");

  If {(application.myStream)

  application.myStream.play ("livestream2", 0, -1, true, application.myRemoteConn);

  }

  The Stream.play () method does not work why?

  What I've done wrong?

  In this case, I recommend a mixture of solution...

  Something like that will be interesting to check:

  var tempSwitchingStream = Stream.get ("myswitchingstream"); create a stream live temp on the server local app...

  tempSwitchingStream.play (livestream1, 0, -1);      Subscribe to tempSwitching to livestream1... That is to say get the content of livestream1 in there... I can also switch to different streams inside... tempSwitchingStream will get the contents of the stream of //switched

  If (tempSwitchingStream) / / if there is

  {

  NS. Attach (tempSwitchingStream);  Subscribe to my net workflow to receive data from tempSwitchingStream

  NS. Publish (livestream, "live");  now flows net is get data from tempSwitchingStream, so publishing those data with the name "livestream" on the connection to the network... NET already know its NetConnection... See above

  }

  Did you get the point? I created a temporary stream that can pass the stream in its method of game and then I push this temporary stream to a remote server...

  However, it is tricky... Majorly, in most cases similar to yours, people write applications on the application of remote server to get the stream and he spend the pull in play method as described in the first method discussed...

• Pay attention to the catalyst control center monitoring program does not work

  computer keeps displays the warning that monitoring program, catalyst Control Center does not work - what is it

  Hello

  ·         Did you make any changes before the show?

  ·         What operating system is installed on the computer?

  I suggest that you download and install the Catalyst Control Center from the AMD website and check if it helps.

  http://support.AMD.com/us/pages/AMDSupportHub.aspx

• My volume does not work why?

  I don't know what the problem... My laptop was working fine with the sound two days ago. Now all of a sudden nothing does. The system sounds ping when I see if they work in the volume mixer, but when I try and play something in WMP or Youtube, as well as a game in general, nothing works. The green bar that is supposed to go up and down does not appear. But when I do the Test in the properties of speaker for this test perfectly. I tried updating my audio drivers, I scanned changes in Device Manager, and I entered and allows applications to use exclusively the audio, or anything like that. But for some reason any it still does not work. What should I do? ANY help is appreciated.

  EDIT: Just like a note aside, when I plug in my headphones, I get no sound either. Just in case that allows to resolve my situation.

  Hey Scotty,

  -Have there been recent changes made on the computer before the show?

  I suggest you for the link and check if that helps.

  Getting sound from your computer: recommended links 

  It will be useful.

• I have installed Tv Rapi Toolbar and I can ' uninstall. even I click on uninstall in Control Panel. It does not work. Can someone help me

  Please can someone tell me how to uninstall it from my Tv Rrapi Toolbar programs. I am trying to ununstall it but unsecfully. It does not work.

  Hello

   
  1. do you get an error message?

  2. what happens when you tried to uninstall LPR Toolbar Tv?

  3. are you able to uninstall other programs on the computer?

   
  Method 1:
   
  Troubleshoot installing or uninstalling programs
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs
   
  Check if the problem still persists. If Yes, proceed to the next method.
   
  Method 2: Run the Fixit in the document:
  
   
  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651
   
  I hope this helps.

• Clipboard in Fx Android does not work why?

  (Hope this isn't a duplicate: when I started posting, the system asked me to confirm my e-mail address and said that my message would be displayed, but the system said now I haven't sent anything.) A little later: my mistake, a misunderstanding of the language of the system forum. I had posted, which seems to not be the same as sent. My original post was, in fact, posted, but I looked in the wrong place.)

  With Android Kitkat 4.x, I could set up an account with Keepass, get my user name or password saved to the Clipboard, then go to Fx, set up a logon account page, press and hold in the area id or password, and the popup 'Paste' seems to me; clicking on the icon would transfer the data from the Clipboard to the corresponding logon box.

  With Android 5.0 Lollipop, it does not work: instead of the paste popup, I get an arrow in the login box telling me where to type in the data. I know the Clipboard Android works: using Keepass, I can record the date in the Clipboard and then, for example, go to Gmail, hold on, 'Paste', click on that and see the Clipboard data transferred to Gmail. The Fx problem exists since I received my phone Moto X last March thanks to every Android Fx update, the most recent of which this release.

  When I long press on the field, I get a bar upstairs that has an icon of the dough. I have attached a screenshot (reduced size) of what I see. (It was one thing to chance, that I copied, because I don't have Keepass.)

  You don't get something like this?

  Oops, perhaps it is 5.1 and not 5.0

• my master password does not work, WHY?

  I used my master password for quite awhile. Today when I put it in it does not work. HOW CAN THIS HAPPEN? I saw the the way to remove it, but then I lose about 28 login and password for all my financial sites. Why the P/W does not work? AND why would you if it can FAIL. Y at - it another way around this in addition to a total deletion of all my other passwords. I tried to restart my computer a couple of times to see if it would fix itself, but nothing helped.

  Have you tried to close and restart Firefox or restart the computer to see if it have an impact?

  What security (firewall, antivirus) software do you have?

  If the MP password does not work and is not accepted if you get a prompt to connect to the software security device, then it is likely that the signons3.txt file got damaged or replaced by an older version.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  You have a backup of files in the Firefox profile folder?

  • http://KB.mozillazine.org/Profile_backup
  • https://support.Mozilla.org/KB/backing+up+your+information

• I downloaded the (US) dictionary and spellchecker - it's showing in my modules - but it does NOT work - WHY?

  I added the English spelling corrector of the United States (US) 5.0.1 - it is in my modules, spellchecker is checked in tools/options - and I restarted firefox after it said 'successful' - However, it still does not work.
  Is there anything else I need to do?
  Help, please!
  TY

  TY so much... it works now. I see what I was doing wrong. I would right click, but not on the misspelled word and the area to correct the spelling & "add to Dictionary" did not come upward. After reading your response and clicking on the link, I decided to try by clicking right on misspelled word... YEAAAAAAAAAAA!
  Yet once, so I appreciate your prompt response & look forward to transversing again in the future.
  Have a nice day (night)
  Jonie

• "set the restart target action" does not work, why?

  There is an element of "set the restart target action" in the SDF file. I put it to "run a system definition.

  

  But it does not work. I don't know why. It seems that when the project is canceled, the SystemDefinitionData.nivscfg file is deleted.

  

  Cancel the deployment of will stop the configuration and mark idle.

  If you restart the RT target by HW button or through the channel "System of command channels", while the configuration is active, it will start the Setup again after the reboot.

  Jiri K.

• LM324 oscillator does not work, why?

  It is a typical noob question, I'm afraid...

  In the datasheet of the LM324 I found (page 13), a circuit for an oscillator design. http://www.TI.com/lit/DS/symlink/LM324-n.PDF

  I tried to reproduce this oscillator in MultiSim, but it does not work as it is supposed to; even measure voltages higher than the voltage of the source?

  Can someone tell me what I am doing wrong?

  TYhnak you, it works fine now.

  The model manuf. button shows only ITT/LM324A_2

  Perhaps it is also because of my old version 10?

  Thnaks you very very well!

  Martin

• Aero does not work why?

  This number is displayed in the name of another user.

  Hello

  The Aero feature does not work in Windows 7. I tried the following links for assistance:

  http://support.Microsoft.com/kb/976170

  http://support.Microsoft.com/mats/aero_effects_not_working/en-us

  It stopped working after the use of a screen recording software. I got out of this, verified that my screen resolution is correct and video card drivers are updated, but it still does not work. Does anyone have any ideas or suggestions, that I can try?

  Thank you

  Social media - Dwayne W

  P.S. I ask the user to monitor this post and try the suggestions.

  Hello

  1. which edition of Windows 7 is on the computer?

  2. what happens when you try to choose the Aero theme?

   

   

  Method 1: Uninstall screen recording software and see if that helps.

  See the following article:

  Uninstall or change a program:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

   

  Method 2: SFC scanner.

  System File Checker (SFC) scan will replace the missing or corrupted system files on your computer.

   

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

   

  Method 3: The restore of the system; restore the computer to a date when it was working fine before.

  Reference:

  System Restore: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions