my watch always prompt to update 2.2.1
I did not use the beta software at all on my watch, just my phone and I have already deleted the profile of bet, I turned off both devices gave him a few on each and still unable to get the 0 s 3 update. He said that my watch is up-to-date with 2.2.1
Hello
You must first upgrade your iPhone to iOS 10 (do not forget to make a backup first):
Update the software on your iPhone, iPad or iPod touch - Apple Support iOS
Tags: Apple Watch
Similar Questions
-
I missed the prompt to update my notes. My software is up to date, but there is no option to update notes. How can I get this opportunity again? I want to sketch options and make interactive lists.
Open the Notes app and look near the upper left corner to see if the upgrade option is there.
-
Just installed Windows 7. Windows udate watch 21 important security updates but they will install. I get the error code 80070539. Tried to install updates by shutting down the computer, but the computer stops until they install.
Hello Tallydupp, welcome.
Do you by chance have Google Desktop? Some users have reported interference problems in Winodws 7 while using an older version of Google Desktop.
Try to uninstall it if it exists.Let us know what happens
Thank you! Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
kb2707511 shows that it is installed but appears always that the update is ready to be installed. I uninstalled it down loaded the file and reinstalled, still the same thing, Fix - it Ran no problem detected, a suggestion? Windows xp home Service pack 3
I also ran my anti-virus (AVG) Spy bot S & D, Microsoft Safety Scanner program and no problem found in none of the scans.
I just want to update my post, I installed the kb2707511 update in the safe mode and so far he has not yet presented. Keep your fingers crossed that it does not yet appear. Thanks to all the people on this site that help people.
-
Why the temperature still showing on my watch shows a different temperature than on my husband watch when they both use the same weather app?
Hi Jodie
If you are each using the weather app (which is included in the framework of the iOS and watchOS), the following steps can help (followed by each of you):
- On your iPhone, in the weather app:
- If using anything other than the current location (which is included by default), make sure you have each added to a common location / city.
- To add another location, select the icon «+»
- On your iPhone, in the application of the watch, go to: My Watch (tab) > weather > default City > make sure you have each selected at the same location (for example: place of current residence or Mount Laurel).
- On your iPhone, go to: settings > privacy > location Services:
- Ensure that the location service is enabled;
- Make sure Apple Watch is face value while it helps;
- Check that the weather is set to always;
- On your iPhone, go to: settings > general > background App update:
- Check that the bottom App Refresh is enabled.
- It can also help to activate the setting for the weather.
- For optimal performance of your watch, keep the Bluetooth and Wi - Fi enabled at all times on your iPhone:
- iPhone: settings > Bluetooth - on.
- iPhone: settings > Wi - Fi - on.
- On your iPhone, in the weather app:
-
Activity do not sync after watch os 2.2 update
Hello
it been 2 days now that I updated to look at OS2.2 and did not get synced on my phone (stand, move, exercise) activities.
As you can see int ht screenshot, I'm quite a heavy user of this feature, so I'm pretty bummed I lost my story for 2 days now.
Unfortunately, I have not found all of the messages in the community that address specifically, however I tried to re-initialization, reset, disconnect, etc and nothing seems to work.
Thank you in advance for letting me know how to proceed.
Santiago
Hi Santiago
Check the fitness of follow-up is always on:
-On your iPhone, go to: settings > privacy > Motion & Fitness - check that fitness and health monitoring are enabled.
-On your iPhone, in the application of the Watch: Watch My > privacy > Motion & Fitness - make sure the heart rate and fitness tracking are each enabled.
Otherwise, given the steps that you have already tried, can contribute to restore and restore your iPhone and Apple Watch:
- Cancel the twinning of your watch to your iPhone using the Watch app (it also refreshes the backup from the night before):
- iPhone: Watch app > My Watch > Apple Watch > press the 'i' next to your watch > désapparier Apple Watch.
- Cancel the twinning of your iPhone - Apple and Apple Watch Support
- Backup your iPhone:
- Via iCloud (encrypted as standard), or;
- via iTunes on a computer - IMPORTANT: choose to "Encrypt iPhone backup", so that the backup contains sensitive data, including the data of health and activity, saved passwords and settings Wi - Fi.
- https://www.Apple.com/support/iPhone/backup/
- Erase content and settings on your iPhone:
- iPhone: settings > general > reset > erase all content and settings.
- Restore your iPhone from the encrypted backup:
- Pair and set up your watch:
- Choose to restore the watch (backup restore) when provided the opportunity during the whole.
- This will restore most of your data and settings, with a few exceptions (for example cards Pay Apple, access code).
- Set up your Apple Watch - Apple Support
- Cancel the twinning of your watch to your iPhone using the Watch app (it also refreshes the backup from the night before):
-
Everyone can not open Wechat of the Apple Watch after the last update?
After the update for Wechat around the end of 2015, I can't open the app to Apple Watch.
Whenever I tried to open the app, a loading screen came, and then the application leaves itself.
Someone help please?
Thank you!
I already have the Apple Watch combat and reinstalled the Apple Watch. I can always open the app.
I use a system of 2 OS on my watch and an iPhone iOS 9 5 C.
If you have not already done so, it may help to update your iPhone and Apple Watch for the latest versions of software.
Update the software on your iPhone, iPad or iPod touch - Apple Support iOS
Update the software on your Apple Watch - Apple Support
If not, try the following steps:
- On your iPhone, go to: settings > General > storage & use iCloud:
- In the storage section: press on managing storage > music > Edit (top right corner) > delete all the songs.
- Back up your iPhone to iCloud (do not reset your iPhone later, just to make the backup):
- Also back up (but does not synchronize) your iPhone to iTunes, select the option "Encrypt iPhone backup" (even once, do not reset your iPhone later, just to make the backup):
- Then try again to open WeChat.
- Music can be added to your iPhone again after trying these steps.
- On your iPhone, go to: settings > General > storage & use iCloud:
-
So I finally got the Windows 8.1 update is displayed in the store, but he told me there are updates, I need to install. An update successfully installed without problem. But the 'KB2928678' update continues to run into errors. I get the error "80073712". I try troubleshooting it and it says it has solved the problem, but when I return to the screen updates it can even search updates and said that I never checked the updates at all.
And then it will do two things. either he's going to bring me back to say an important update is available or tell me updates failed. the last two attempts he said the update is available, but the update always fails every time. I went to the command prompt and has as well. Windows 8.1 has been popping up in the store today but now that he has, I'm having all these problems update.
Is programs and features: Install updates <=this>=this> white/empty?
Is programs and features. Or turn off Windows features turn on <=this>=this> white/empty?
Have you tried to do a Refresh?
Quote:
- Windows Update, error 0 x 80073712
http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-error-0x80073712
- Windows Update, error 0 x 80073712
-
Apple Watch - ring exercise not updated
Hello. Just today, I had problems with my Apple Watch Sport (series 1) watchOS3, which included the workout and the App running activity.
Today, I went for a Cycle in the open air which I followed him on my Apple Watch (I brought my iPhone with me). I finished training and saved. In total, I had worked for 53 minutes, however, he wasn't to my activity.
In business, he told me that I've only made 26/30 minutes of exercise, even though at the bottom it says 'Outdoor - 8.67 km Cycle'.
I called the Apple Support, but he just told me to disable the pairing and re - pair my watch, which did not help. I was told that they were "redevelopment of their tools" and therefore could not diagnose my problem, so they told me to call back tomorrow.
Why I write here today, it's just to see if someone has had this experience, and if you know how to solve this problem. Any help is appreciated.
Thank you!
Hello
Progress toward your daily goal of exercise of credit, the application of the activity aims to identify the activity equal or exceed the equivalent intensity of a brisk walk. This requirement applies for general daily use and during the recording of training through the app to training sessions.
Appropriations for the financial year is awarded for each full minute during which this condition is fulfilled. It is possible that not all of your cycling workout meets this requirement.
The definition of a brisk walk varies from one person to another and depends on your personal information. To verify that this is correct - and update over time:
- On your iPhone, in the application of the watch, go to: My Watch (tab) > health > edit - tap and adjust the settings, then press on in fact.
Apple Watch uses different sensors and data sources to track the results of training sessions, depending on the type of activity. For example, with Apple Watch (first generation) and the models of series 1, the watch can access data matched iPhone GPS if it is taken along during the walk outdoors, running and cycling training. (Series 2 has built-in GPS).
Calibrate your watch can improve the accuracy of the estimates made by the activity and workout app app. More information and instructions for calibration of your watch are available via the link below. The article also includes instructions for resetting the calibration data and leave.
If you prefer to receive credits of exercise during the duration of your training sessions, regardless of their estimated intensity levels, follow them through the application of the training session using 'Other' as the type of activity. This credit a minute of exercise for each minute of the workout. Active calories will be estimated at a rate equivalent to a brisk walk or based on the data recorded by the heart rate sensor, according to what is higher.
More information:
-
Contacts missing after Apple Watch 3.0 app update
I just updated my Apple Watch to 3.0, and the Contacts app disappeared. It shows on my iPhone, but not in the small icons on the watch and Siri on the watch says that I don't have a Contacts app. Messages on my watch are coming through, but as numbers instead of names. I tried a hard reset of the watch with no luck. Any ideas?
Hello
Under watch OS 3, the friends feature (which was available in previous versions) comes over and there is no direct replacement for it.
When making calls or sending of new messages, contacts instead can be selected via the phone and Messages applications or using Siri:
-
How to configure Firefox to get always the newest updates of content.
Site updated. Open Firefox, went to the site and displays the older version. Made of the research. Found this problem is known and clear cache allows the update of content to display. But this is not a permanent solution and should even do whenever I want to see content recently updated. You want to configure the settings of the browser to always retrieve updates.
Thank you!!You can reload webpages and ignore the cache to refresh potentially stale or corrupt.
- Hold down the SHIFT key and click the Reload button
- Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
- Press 'Command + shift + R' (Mac)
-
Serious problem with watch since the software update
Hello
I have a serious problem with my watch since to do the update of the software this morning.
Watch dial keeps flashing between the Apple logo, dial and access code.
Watch does not respond when you try to enter the access code or button does not not so can't turn off to try to restart.
I tried to disable pairing my iPhone 6s but watch be message saying "can't match Apple Watch - Activation lock could not be disabled on your Apple Watch because of a server error.
Nothing seemed abnormal during the update, I just let him do his thing.
Any help would be welcome.
With great thanks
Nicola
Hi Nicola
Try restarting your watch force: press and hold the side button and the digital Crown for about 10 seconds, until you see the Apple logo, then release them and expect the watch again.
-
Platform Java 7u9 and Java plug-ins Deployment Kit are yellow and asked to be updated.
The problem is that there is no other version I've already installed.
Even if I try to install this latest version once again I get the message that I already have the latest version.
The same problem was with Flashplayer where I installed the latest version, but Firefox has asked three days update the plugin.
The last is now ok, but the Platform Java and Java Deployment Kit is hopeless.
Why he request an update if there is none?
What should or can I do? I always be careful and patch my pc if necesserry.
All my friends who work with Firefox have the same problem.
Can someone tell me what is happening here?
Greetings, Mimi321See the Platform Java > Java SE 7U10 or Java 6U38 (download the JRE)
-
I just bought a brand new Apple Watch tonight and brought it home to put in place. As I started the pairing, he said before pairing I needed to update the software. I started it, and it seemed to take a while on my home wi-fi. Have downloaded correctly, however it is showing the audit in the watch on the iPhone application and has been like this for about 30 minutes. Any thoughts on what I should do? Should I cancel the update and try again later? My wifi connection speed is very good, and my 6 s iPhone is updated to iOS 9.3.1.
Hi Chris
Try the following steps, which can help to solve the problems at the latest to step "review".
However, do not interrupt your iPhone or watch if the process has already reached the point "Setup."
- On your iPhone, close the watch application and all open applications:
- Double-click the Home button, and then drag upward on each preview of the app.
- Remove the magazine from your watch and restart both devices:
- The two put together, and then restart your iPhone first.
- To turn off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;
- To reactivate: press and hold the side button until you see the Apple logo.
- Replace your watch on the charger, keep your iPhone connected to the power supply and try to update again by following the instructions here:
- On your iPhone, close the watch application and all open applications:
-
At a prompt of updated, but not sure that's really of HP or its virus
Its a Pavilion DV 2268ca, win7 64-bit system.
the prompt looks like this
Fearing that it might be the virus, I thought the update.
It is the HP Update window. Before we started using HP Support Assistant, this is the tool for laptop and desktop used to push updates to.
Now it is mainly used to push updates for printers, you have a hp printer installed?
Maybe you are looking for
-
Should I use Visa 5.0 if I do a labview 2009 executable?
We want to make an installer for an executable created in Labview 2009. I installed LV 2010, but I opened the project (which has been done in 2009 LV) in 2009 from LV. DURATION VISA 5.0 is the only option for the VISA duration under the "additional i
-
Flickering desktop icons prevent access to everything except E-mail & MS Works Word
For several days the icons on my desktop have been flickering. I can't access all programs except MS Works Word and e-mail. However, I discovered that in writing a few words in the works of MS Word and leaving open, stops flickering and all is fine
-
Cannot remove battery HP Pavilion DV6000
Hello I got a HP Pavilion DV6000 for four years now and have never been able to remove the battery. It's also 2 x bigger in size - it is a bit like a leg for the laptop. My problem is that his switch is stuck on the right side (where the CD rom is) a
-
Since upgrading my ram installed shows 4 gb but says now only 2.93 GB usable why?
Since I've upgraded to Windows 7 my ram poster now only 2.93 GB usable of my 4 GB. Why would it be? And that would be why my system seems slower since upgrade? The performance is not as fast it was before Vista. I am more than a little confused!
-
The upgrade to the CSA 5.1
Although there is no way of migrating to 5.1 CSA, it is conceivable to build from scratch, re - write the rules and redeploy the new agent. Has anyone tried this before? I have? m looking for success and horror stories. My biggest fear is the redeplo