My WD 3 USB drive does not work in the 3 USB Ports on my Lenovo W530 lap. But work in the regular ports.

Similar Questions

• External Combo CD-RW/DVD-ROM drive does not work with USB 1.1

  Hello world

  I have a problem with the PA3352E - 2 CD 2 CD-RW/DVD COMBO USB 2.0. A colleague is owner of this car and use it on a NB DellC610 with Windows XP on it. The problem is that the drive does not work with this type of nb (with a NB from Fujitsu-Siemens newest there no problems); There is always an error message about "surge." I think it has to do with the USB 1.1 because the player seems to be built for USB2.0. Is it possible to use this drive correctly with usb1.1 (ok, the flow is low, but more important is it works in general)? Unfortunately his nb will not work with USB 2.0...

  Thank you very much in advance.

  Kind regards
  Steffen Rieger

  Hello

  AFAIK this external must have a power adapter. You use it too? I'm not 100% sure, but there are difference how much power Gets the USB slot. Toshiba notebooks is around 500 my and some producers another laptops send between 300 and 500 my. The external device requires approximately 700 my.

• How to create a bootable Windows Vista USB drive? I can't install Windows Vista with a disk because my dvd drive does not work.

  I have install vista and I want to convey in the USB key... because my dvd drive does not work... Please tell me what I need to do

  Please send your reply to my email id, or post it here...

  Hello

  Vista is not designed to be installed like this.

  But others led to ways to do so.

  This may interest you on this subject:

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  Google will help you in this matter.

   

  See you soon.

• Canvio Plus 2.5 "1 TB external HARD drive does not work with USB 3.0

  I've had this drive for about a month.

  I am on Windows 7

  I can only operate by connecting to USB 2.0 ports. It is then visible in 'My Computer'.

  If I connect to USB 3.0, it turns on the case but does not appear in 'My Computer'.

  I tried it on all my USB ports 3.0 - up on one and two in the back of my case.

  I checked my BIOS and USB 3.0 is enabled.

  I tried to follow the suggestions in the user manual, but the drive does not appear in the management of so connected devices on USB 3.0, but it does when connected in USB 2.0.

  Any ideas?

  Hello

  As much as I know the Windows 7 system requires installation of additional USB 3.0 driver.

  Many laptops and computers use USB 3.0 driver that was released by Intel... it is because of Intel chipset...

  I guess that USB 3.0 is already installed, but probably you need to update the driver at least to the newest version...

• my hybrid HDD/SSD drive does not work with my new Y50

  my hybrid HDD/SSD drive does not work with my new Y50

  Help!

  Hi YouMaCry,

  You have any records? or a USB recovery?

  If you cannot install an OS on your SSHD your SSHD can be defective, because it is reading it is cluster/bad sectors. A defective HDD/SSD/SSHD can still be detected (sometimes even when it is defective).

  To be sure contact Lenovo Support Center and ask them to send you your SSHD/unit in a get fully tested Lenovo the SSHD repair depot - and have defective parts repaired within a reasonable time!

  See you soon

• Iomega floppy drive does not work

  Floppy drive does not work. Always has.

  Hello Robert,.

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  1. What is the brand and model of your computer?
  2 floppy drive connects to a USB port and it does not appear in Device Manager?

  Thank you for details on the issue.

  This problem may occur because of corrupted device drivers or incorrect device settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  If this does not help, use method 2.

  Method 2:
  If the floppy drive is displayed in Device Manager, I suggest you uninstall and reinstall the floppy drive and check.

  To Uninstall , follow these steps:

  a. press Windows + R keys together, type devmgmt.msc in the run window and press ENTER.

  b. right-click on the floppy drive, and then click Uninstall.

  c. restart the computer.

  Floppy drive must be reinstalled automatically.

  I hope this information helps.

  Simply answer the required information and let us know if you need more help.

  Thank you

• Re: Satellite A65-S1067 - display driver does not work

  As stated in my title, the display (ATI Radeon 7000 IGP) on my Toshiba laptop driver does not work and has not worked for quite a while.

  Whenever I try to play a game that is to install a game (like World of Warcraft or Civilization III) it does not work because it says that my display driver does not work.

  Can someone help me with this?

  Hello!

  You use the factory settings on your laptop computer or you have installed your own version of Windows?
  And have you tried to update the driver? I put t know what OS you use, but the Toshiba site, you can search for a new driver.
  http://www.CSD.Toshiba.com

  And have you tried to update the version of DirectX? You can find on the Microsoft Web site.

  Sorry, but at the moment I can t tell more.

  Good bye

• Satellite P200 accidents + message: graphic card driver does not work properly

  Hello

  hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time.

  When it started going down he gave me a few messages in the sense of "your graphics card/driver does not work properly and windows will be arrested to avoid damage.

  It has progressed to the point where now when I turn it on, I have vertical lines running down the screen and the screen flashes on and outside. Within 20 seconds, it restores the BSOD - 'there was a problem and windows will be arrested. Error Page_Fault_In_Non_Paged_Area"then stops.

  I ran a system restore but the problem remains.

  I have a feeling that my graphics card is toast. Is this good? Are there any other options to try? Thanks in advance for any answers.

  Matt

  Hello

  Sounds like the GPU problem.
  But try the graphics card driver update.
  Use the most recent driver for your graphics card.

  In addition, clean the fans of portable computers.
  Dust and debris could prevent the cooling fans to turn with the best speed and this could lead to a higher temperature which would lead to overheating.
  Use a jet of compressed air. I also use it and it helps to get rid of dust and debris.

  If this is not enough, then a problem of graphics chip would be possible.

• CD/DVD drive does not work after 8 Win instalation

  Since a month since I've updated my windows in windows 8, everything works fine but the DVD - RW.

  When I put the blank cd and try to open it, it gives me error when opening by saying:
  "windows could not complete the format".

  Who's a software or a hardware problem?

  waiting for help!

  This means that your CD/DVD drive no longer works and is not recognized by the system?

  If Yes, then I would recommend checking this Toshiba document that I found on the portal of the knowledge base site:

  + Why my CD/DVD drive does not work after upgrade to Windows 8? +
  http://APS2.toshiba-tro.de/KB0/FAQ2B03F10002R01.htm

  You must uninstall the programs from Toshiba:
  TOSHIBA Recovery Media Creator
  TOSHIBA Disc Creator

• Satellite 2430: CD/DVD drive does not work - i/o error

  Hello all Toshiba people.i have recently bought a Toshiba Satellite 2430 for a very good price. One thing the carpet * a DVD - ram Uj - 810 drive does not work when I put in any type of cd or dvd, I get this error
  F:\ is not accessible.
  The request could not be performed because of an i/o error.

  I talked to my local computer Wizz and does everything that he suggested to the letter and still the same problem. He suggested updating the bios drivers and the only way to do that is on a disk drive that she cannot take the an or a CD or dvd drive is not working. Can you please help me!

  Begging you a lot
  Michael Borger

  In my view BIOS update will not change.
  I assume that the reader has worked in the past with the same BIOS version
  It is a drive hardware problem or some registry keys are corrupt.

  I think that it s a hardware malfunction may be a matter of lenses.
  But try this;
  Remove the drive from Device Manager and shut the laptop computer. After restarting again the operating system should recognize the drive again. Then you can check the functionality.

  Otherwise, you can remove the disk from the laptop, and then start the laptop without the drive. Then stop the laptop, put the drive in the notebook and start over.
  The firmware should again loads.

  But if these procedures help t, I don t see it differently as for replace the drive

• Satellite Pro A120: DVD/CD-RW drive does not work

  Hello: the dvd/CD-RW drive does not work. apparently it has been disabled somehow! Any ideas on how I can turn it back on?

  Have you tried the Device Manager and it says it works normally!

  Any ideas please?

  Thanks :)

  > apparently it has been disabled somehow
  I put t think that the disc has been disabled!

  How someone or something should turn off the drive? You have disabled the drive? I don't think so!

  You said that the drive appears in Device Manager. So I guess that the drive is enabled and is recognized by the OS.
  You are getting error messages or what's wrong?

  Perhaps the reader can read or burn CDs or DVDs.
  This happens if the lens of the drive cannot calibrate properly and can not handle the inserted media.

  Maybe the replacement drive is required!

• CD/DVD drive does not work on my Satellite L300D

  Hi all
  * I have Toshiba Satellite L300D laptop and my OS is Windows Vista.*
  I don't have any driver cd... when buying. They ask me to download from internet if any necessary driver software.
  Now if I put a cd/dvd is not readable. The option of cd/dvd drive is invisible in the my computer window.
  I renewed my anti virus and checked the laptop. There a few virus and I deleted all the viruses.
  But still my drive does not work.

  What should I do? Also, my warranty period expires last month. I'm not having any recovery cd also.
  Please give me the solution.

  Hello

  Please check if the CD/DVD drive is listed in Device Manager.
  If it s listed, then it means that ODD has been recognized by the Windows operating system.

  In this case, try this;
  -Remove the STRANGE to the list of devices.
  -remove the filters above and below of this registry key:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -Reboot the laptop

  Usually, this helps.

• Wireless driver does not work on Satellite A30-PSA30E

  All the ideas that is suitable for the above model driver, I downloaded about 5 drivers wireless on the site, but none seems not to work.

  What do you mean with the driver does not work?

  Do you have an error message or what?

  Have you checked if your laptop supports a minPCI wireless network card?

  If your mobile phone does not support an internal WLan card then you will not be able to install the WLan card driver :) very simple

• My CD/DVD drive does not work

  My CD/DVD drive does not work, he plays any kind of disc, I don't think that my computer recognizes that it has a DVD player that more, please help!

  See this knowledge base article http://support.microsoft.com/kb/982116/en-gb

  Remove spyware, etc., can often mess up some registry settings that make it seems that the CD / DVD ROM drive is defective.
  HTH
  Neil
  www.nwarwick.co.UK

• Disk drive does not work / missing

  I am trying to restore my laptop to its factory settings, but my CD player does not work. The only time wherever it seems to work is when the laptop is turned on and then a few seconds later, when I logged on it not working + open to all. on my computer the CD drive does not appear. can anyone help?

  You can see the effects of an ongoing infection "hijackware. That being said, the result of your Validation check is more encouraging.

  NOTE: Must have uninstalled AVG before you have installed MSE, not later! See http://answers.microsoft.com/thread/bf757e6a-e320-4a67-92bc-767e6acb26c4 (and possibly http://answers.microsoft.com/thread/87058857-d181-4019-a723-efd9a49d9275).

  ~~~~~~~~~~~~~~~~

  [You can print these instructions for reference offline. [If a step said to restart, restart! ]

  ACTIONS:

  1. right click on the following link & SAVE the removal of AVG on your desktop tool: http://download.avg.com/filedir/util/support/avg_remover_stf_x86_2011_1322.exe

  1B. download the Norton removal tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in # 1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  3B. right-click on the file that you saved in # 1 b above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  4. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 & run the difficulty.

  5 IMPORTANT - DON'T SKIP THIS STEP! Open Internet Explorer (only!) to http://support.microsoft.com/kb/971058 of => & run the difficulty in DEFAULT modes and AGGRESSIVE. [2]

  6. restart one last time & test the functionality of your CD/DVD drive but please don't "restores [your] laptop to factory settings it is ' immediately.

  Also run a manual check of updates by http://windows.microsoft.com/en-us/windows-vista/How-can-I-tell-if-my-computer-is-up-to-date

  7. make sure you can update MSE manually via the button UPDATE tab UPDATE by now. (Yes, even if you updated the definitions in #6 above).

  8. for reasons of security, then run a full scan of the system with MSE - do not TOUCH your computer until the scan ends. Let it run all night, if necessary.

  9. response to this post with a sometimes the outcome of the MSE analysis status report.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Comment: If push comes to shove, it is there is a hidden partition restore (not to be confused with the restoration of the system) you can use to do a clean install. Understand that if the hard drive does not work because of a hardware failure, a clean install will NOT repair.

  [Under the guidance of correct a few typos]