My WD drive bowed and data transfer is now very slow

Similar Questions

• USB 2.0 data transfer rate is very slow in Windows XP computer.

  Original title: USB 2.0 work very slow

  USB 2.0 data transfer rate is very slow, what should I do?

  Hi MahendraSoni,

  1A USB 2.0 works much earlier?

  2. don't you make changes on your computer before this problem?

  There is a fix for this problem. You can contact Microsoft Customer Service & provide article kb 908673, which contains the fix.

  Hope the helps of information.

• Auto flash drive has appeared on my screen. Since I can't play video, and my system has become very slow. I have Mac OS Lion 10.7.5 and software is up to date. Before that everything worked beautifully. Can you please provide a link then

  Dear Adobe.

  Yesterday, I installed the latest version of Flash Player that car appeared on my screen. Since I can't play video, and my system has become very slow. I have Mac OS Lion 10.7.5 and software is up to date. Before that everything worked beautifully. Can you please provide a link so I can uninstall the latest version only. Thank you. Stephen Kress. Melbourne. Australia

  When you run the uninstall program, it allows to uninstall all versions of Flash Player.

  If you want to revert to an old version after that, get it from http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html

• When I transfer files from my hard drive on a USB flash drive, the transfer rate is very slow, about 250 KB / second. Is it possible to increase the speed of transfer rate

  When I transfer files from my hard drive on a USB flash drive, the transfer rate is very slow, about 250 KB / second. Is it possible to increase the speed of transfer rate

  depends on the speed, support USB 2.0, USB 2.0 ports, and with active BIOS settings

  (2) you can increase the speed, if your motherbaord has a USB 3.0 port and must be enabled in the BIOS

• Satellite L505-144 - flash memory transfer speed is very slow 1.45 Mbps

  Hello

  I have a Satellite L505-144 and installed the system Win 7 64-bit *.
  The problem is when I move or copy DATA using Flash memory, transfer speed is very slow 1.45 MB/second and I try the same memory Flash on another PC its work too quickly it move 22 MB per second

  What is the problem?

  Hello

  What is the status of the SATA mode in the BIOS?
  It must be set to AHCI.
  If it s set to compatible, then the SATA benefits can not be used
  Check it!

• Just upgraded my iPad 2 (model MC769B/A) 9.2 and it works now VERY slow.  Is this a known problem and is there a fix please?

  I just updated my iPad 2 (model MC769B/A) to 9.2 (13 c 75) and it is now VERY slow.  Is this a known problem and is there a fix please?

  The iPad 2 is the older and less powerful device that can always be upgraded to iOS 9.2. Many users have had success running iOS 9.2 and some have had problems with it on their iPad 2. I would like to start will be all the basic things and then, if necessary, back up, restore settings and restore the backup or restore like new as a last resort.

  Claire Safari. Go to settings > Safari > clear the history and data from the Web site

  Close all applications. Press the Home button twice quickly. You will see small glimpses of your applications recently used. Drag to the left to find the application you want to close. Swipe up on the preview of the application to close

  Force reboot the device. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

  If this does not help, try to reset all settings. Settings > General > reset > reset all settings. No data is lost when you do this, but all the unit parameters must appear again, including the passwords of your WiFi network.

  Reset factory via iTunes

  http://support.Apple.com/kb/ht1414

  If you restore like new, past purchases can be downloaded again.

  http://support.Apple.com/kb/ht2519

• installed the new windows Friday and since my computer is very slow and not connecting to internet properly

  installed the new windows Friday and since my computer is very slow and not connecting to the internet correctly... anyone else having these issues?

  System Restore to go back before the show.

  I suggest you to install the updates one by one and reboot the computer after installing each update to verify that update is causing the problem.

  Also note the updates that you install on the computer.

  Once you come to know what update is causing the problem, let us know.

  Do not install any driver updates offered by Windows Update. Find them in the manufacturer's website instead.

  Try a convenience store

  Windows includes two programs of troubleshooting that you can use to automatically fix some common problems with performance on your computer or to the maintenance of your system.

  Open the Performance troubleshooting utility by clicking the Start button, then Control Panel.

  In the search box, type Troubleshooting, and then click Troubleshooting.

  Under system and security, click check for performance issues.

  Open the of System Maintenance Troubleshooter by clicking the Start button, then Control Panel.

  In the search box, type Troubleshooting, and then click Troubleshooting.

  Under system and security, click run maintenance tasks.

  08/14 / 1115:46: 45 pm UTC

• Dreamweaver CS6 and CC both in Mavericks very slow page rendering

  Dreamweaver CS6 and CC both in Mavericks very slow page rendering against 10.8.5

  Any ideas?

  Sorry, but please ignore all previous 'solutions '. It turns out that do these things help only in the short term.

  The REAL problem seems to be that my iMac Fusion of the disc SSD was nearly complete data and has been swapping SSD disk page hard areas now and then. I deleted some applications and data, to reduce my volume of roots to 97 GB of content, and Dreamweaver now makes the pages quickly and reliably (do not have to recover hard disks).

  Again, all my apologies and thanks for your help.

• Using Windows Vista and IE9. Computer is very slow.

  My system is installed with windows vista and using the Explorer 9. My syster is very slow. How can you help me?

  Original title: my system is installed with windows vista and using the Explorer 9. My syster is very slow. How can you help me?

  Hello

  See if this helps you:

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Update drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea to run the System File Checker tool to see if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  If SFC detects serious flaws, you may need to perform a repair upgrade Installation or relocation complete if you don't have a Vista DVD from Microsoft.

  If you can borrow a DVD of Vista from Microsoft you save doing a reinstall full:

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• Satellite L300-1 has 3 and WXP - computer laptop is very slow

  I installed Windows XP computer laptop Satellite L300-1 has 3.
  After portable installation is very slow, I think that the problem in the SATA driver.

  Please send me the driver SATA for Windows XP Home edition, or please give me the solution.

  Thank you

  Hello

  May I ask how you installed Win XP?
  Did you change the SATA mode on compatible in the BIOS settings?
  If yes then this problem is related to the missing SATA drivers!

  You can find the SATA drivers in the Intel Storage Manager which is placed on the page of European disk from Toshiba!

  Launch the .exe with the settings file a p

  For example (the files will be unpacked in the storagemanager folder):

  c:\downloads\iata_cd.exe - a c:\storagemanager Pei

  An accurate description, you will find in the Readme! Read it!
  Then you will get the unique file which could be included for Win XP CD using nLite software!

• DW CS5.5 and 8.1 of Windows - very slow dw & design mode does not work for 1 Web site

  Hello

  I use DW CS5.5 and 8.1 of Windows on a PC. The PC has a lot of memory and power. I use DW 5.5 for the manufacturing and Assembly of Web sites. My laptop has a 17 inch screen. For a site specific Web I have change, page not in 'Design view' without going to "Live View". Also for this one site, DW5.5 is very, very slow and unresponsive. The site is great but has not much JavaScript which would slow down so much performance. I won't change the preferences registry because it is the only site that I'm working on that has this problem. If you answer, please be very clear and explicit in the steps I have to take. Thanks in advance for your help and support. Sorry that the wrong title was on my post.

  The first thing I would do, because it seems to only be one site, is this site 'wrong' for html errors. Run the validator at http://validator.w3.org/nu and clean up all the errors that it finds.

• can change hard drive I use data transfer or use the old key product key

  IM changing my drive hard sata to ide old ones and basically gets one more big one I was wondering if I can just coppy transfer data from my old hard drive to new, or just use the old produckt key really didn't wana must buy a new product key can anyone help or give me some info on this I would greatly appriceate it

  No, you cannot, if you want Windows 7 on a new drive with your programs and settings, then it is better you create a system image and restore it on the new drive. See the following for instructions:

  How to pass Windows 7 on a larger hard drive
  http://notebooks.com/2011/02/16/how-to-move-Windows-7-to-a-larger-hard-disk/

• Is there a maximum size or the limit of text file during storage and data transfer?

  HI -.

  We used WriteExtFile and AppendExtFile to store data in a CSV text file in a data folder in the same location as the executable files of Authorware.

  WriteExtFile ("data\\"^"Variable_Names.txt", Survey_Variable_Names)

  AppendExtFile ("data\\Survey_DATA.txt", Survey_Data)

  As a general rule, we always put our executable files on the hard disk of the computer (c) due to some issues we had with an incompatible network drive in the past.  Have the files on the C: drive, eliminated any network problem.  Our data has accumulated would be always stored on the C: drive as well.

  Now, we need to store a backup copy of the data on a server, on the C: drive.

  My question is: is there is a maximum file size that can be "read in" and then "written" using Authorware?

  My thought was to use ReadExtFile to read the content of the 'Survey_DATA.txt' file and use WriteExtFile to write these same data on a drive on the network, by adding the date and time at the end of the name of the file as a backup file.

  I used this logic, which is working to write on the "P": network drive

  WriteExtFile ("P:\\Survey_Project\\BackupData\\DATA_BACKUP_"^Backup_Date^"_"^Backup_Time^".txt", Survey_Backup_Data)

  Of course, the size of the original text on the C: drive file will continue to grow because "AppendExtFile" is used to add the data of every investigation file in the data file (CSV, each record on its own line).  If the size of the file we will read again (ReadExtFile) will also continue to grow.

  Is there a limit to what we can read in and then write back?

  Thank you!

  Scott

  My apologies, it has been a few years...

  CopyFile is a function that you can load the WinAPI.u32

  Once loaded, use it like this

  Success: = CopyFile (FileLocation ^ "Sourcefile.txt",)

  Destination ^ "DestinationFilename.txt") "

  Remember that you must include WinAPI.u32 with your packed files.

  Steve

• FPGA loop timing and data transfer question

  Hello community,

  two really matter of rookie on FPGA timing loop. Attached a screenshot of the data acquisition loop I created. The different modules have different maximum sampling rates, then what will be the speed of the loop? It will adjust to the slower module, or can I use a timer loop?

  It's the loop of the acquisition, but I need to treat the data as well. Currently I transmit the data to the processor loop through which fixed the length of array FXP. I guess the best would be to use a FIFO. Can you confirm this? Or I should use something else?

  Thank you!

  

  Yes, loop rate will be determined by the slowest module. If you have some really slow analog input module, you might want to put in a loop for your fast IO. You can always put calendar information in your loop to display your real rate of loop using a shift register, subtract and a number of cycles VI.

  You're right - without loss of high speed data acquisition (without losing all the data points), you must use FIFOs. If worry about missing points data (i.e. only interested in current value), then the front panel indicator reading is fine.

• Shared drive file Windows Server 2012 r2 access VERY slow

  Every time I open a file that is located in a shared folder on a drive with r2 Windows Server 2012 (videos and PDF with graphics, in particular), says file takes forever to load, videos often stutter, etc.. This affects all computers connected to the field with access to these shared folders/drive. Is there any solution for this? I couldn't find one so far.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home