My white disc light WD external network is no longer visible in the Finder since the upgrade to El Capitan, drive always is accessible from the Windows PC network.

Problem is roughly according to the title. I had a white WD external light of diving for quite awhile now and I currently plugged it on the same network switch as my iMac, and the printer. Since the upgrade to the latest version (pretty sure it's) El Capitan I see is no longer the drive in Finder. There is an old Windows PC that is connected to another network down switch and who can access the drive of property. I have reset the drive and the iMac and replaced the local network cable.

I have some technical knowledge, but I'm not a COMPUTER guru.

Ch6tty

Can connect you via CMD-K (to connect to the server) and type the IP address / name of the network-share?

Tags: Mac OS & System Software

Similar Questions

  • % RGB values is no longer visible to the Magnifier tool Selection white balance

    When you use the white balance selection tool in LR3.3 RC RGB values no longer appear in the Magnifier window while moving the tool around the image. The only way I can get the values to display is to stop moving the tool, then click on one of several keys (e.g. Ctrl or shift or Alt, or------, etc..) As soon as I then move the tool that the RGB values again disappear until I stop and again once, click one of the buttons.  He had worked previously in LR3 (? before I updated to 3.2 to 3.3 - in other words, the values would show all the time as I moved the tool around the image.)   Any thoughts on what to do?

    Thank you.

    Snap1.jpg

    larsonts wrote:

    Any thoughts on what to do?

    This is a known bug. It was found soon enough after 3.3 RC came out he has a chance to set at 3.3 was released in the official version, but you never know with certainty what will be corrected. All you can do is wait.

    HAL

  • Said connections wireless network connection are available, but the networks to connect to are no longer visible in the connection

    I got a new laptop from work and have connected a couple of times on our network.  Now, he does not connect through the wireless network connection.  He said that the connections are available, but there is no connection available more in the list.  If you have to manage wireless networks, it is in the list... but you can not log in via this page.  Any help would be grateful.

    Thank you!

    Hello

    1. what operating system you are using?

    2. how many computers is connected to the network?

    3 - is a domain network?

    4. What is the exact error code or error message you received?

    5 have have there been recent changes made on the computer before the show?

    Follow the steps mentioned below and check if that helps.

    Method 1: Troubleshooting run Network.

     

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

     

    Method 2: Wi - Fi and in Windows network connection issues.

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    If you cannot connect to a network, it could be a problem with your network adapter. You can try to use the network adapter troubleshooting utility to automatically find and fix some common problems.

    How can I troubleshoot network card?

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

    Method 3: Disable the security software and check.

     

    You can also temporarily disable the security software and check if the problem persists. Be sure to enable this security software on the computer after checking.

    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

     

    For more information, please see the following links:

    http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-a-network

    http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

    http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

    http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

    I hope that helps!

  • I restarted my computer and then it no longer turns. The windows screen and then a black screen came up with a white line that flashes at the top left.

    I had tabs open, and he said that he would not allow restart, but still, I pressed ok and now nothing shows that this black screen.

    Hi Alegreen,

    ·         You receive an error message?

    ·         Did you do changes on the computer before the show?

    Follow the suggestions below for a possible solution:

    Method 1: Start in safe mode and do a System Restore to a point before the show.

    See Advanced startup options (including safe mode) for more information about starting in safe mode.

    Method 2: If the method above does not help, then you can refer the article and check mentioned below.

    What to do if Windows does not start correctly

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

    I hope this helps.

  • can I erase the disc without any wireless networks

    I have a time capsule which is my wireless router.  I have not used for time machine because he has older backups of Mac and does not place to save my current iMac.  I can erase the disc without any wireless networks?  I do Air Port utility?

    I can erase the disc without any wireless networks?

    Yes

    I do Air Port utility?

    Yes, see the procedure below

    • Open AirPort Utility
    • Click on the image of the Time Capsule
    • Click Edit in the window that appears
    • Click the disks at the top of the next window
    • Click on clear disk
    • Choose the Quick erase option
    • Click clear

    The procedure will take only a minute or two

  • External network access to blocked port 80

    I have blocked port 80 (inbound - firewall) on my Windows 2008 R2 server. I want a few users access to port 80 of the external network. How can I do? External network will have a static public ip address.

    Thank you for your time in advance.

    Post in the Windows Server Forums:
    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

  • DynDNS is online but cannot connect from the external network

    I've set up DDNS the modem. IP is available but I can't connect external network.

    Hello

    Thanks for posting your query in the Microsoft Community Forums.

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

    http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

    It will be useful.

    Let us know if you encounter problems under windows in the future. We will be happy to help you.

  • Matter of principle: allow internal VPN users to external networks

    Hi people.

    We receive requests from our internal users, asking the ability/permission to VPN in outside networks businesses of related objectives. They would use our business machines sitting on our corporate network and perhaps required VPN software installation/configuration (for example, Nortel, Microsoft PPTP, IPSec Cisco, etc.) They go out through our ASA Firewall and then connect to the remote network.

    Currently, we block out IPSec and PPTP to avoid this problem, and the reason why we give is that you are connecting two networks and potentially open our internal network up to who knows what.

    In the past we have remote offices install stand-alone DSL lines and ACL acceding to the external VPN, but it becomes expensive and bulky. The same for wireless EVDO cards.

    With the current state of the economy, the price of gas or movement, etc., becomes more difficult to refuse these requests and the higher Up inside are getting hit by operational units.

    How guys do you deal with that? What reasons did you give for allowing / preventing external access VPN? The problem is better solved with the policy or technical (or both?) You poke holes and make exceptions for specific external VPNS, and if so, what are the requirements don't surround you?

    Thanks for any input!

    -Neil

    In the case of IPSec, I'm not sure you fill the two networks.

    You allow traffic be sent through tunnel through your good firewall, and the limits imposed on passenger transport are generally determined by the thrust of policy from the other end of the VPN of parties and any software firewall on your host computer.

    I think it boils down to the protection of the appropriate host on your end, and some common sense as to which the parties, you are allowed to connect too (written policy).

    The Cisco VPN Client provides a built-in firewall and the ability to restrict your host to access the local LAN while the tunnel is UP.

  • Configure the public traffic network IP inside the internal network itself and not to the external network

    A server is now accessible from external network access using the IP and port in browser below http
    http://x.x.x.x:8080

    For the same, we have configured (static NAT) port forwarding in cisco security 1905.

    The application is also accessible via IP and the internal network port internal (ie. http://y.y.y.y:8080)

    Is there a way I can configure my 1905 Cisco as well as internal network (ie. machine B) I can access the application using the IP and the public port and not with the IP address internal? From now on, I'm not able to do the same.

    The current configurations are as follows:
    access-list 1 permit y.y.y.0 0.0.0.255
    IP nat inside source list 1 interface GigabitEthernet0/0 overload
    IP nat inside source tcp static y.y.y.y 8080 interface GigabitEthernet0/0 8080

    Hello

    You can try Domainless Nat.

    no nat ip within the source list 1 interface GigabitEthernet0/0 overload
    no nat inside source tcp ip static y.y.y.y 8080 interface GigabitEthernet0/0 8080

    int gig0/0
    no nat inside ip
    activate nat IP

    int gig0/1
    no nat inside ip
    activate nat IP

    IP nat source list 1 interface GigabitEthernet0/0 overload
    interface IP nat source tcp static y.y.y.y 8080 GigabitEthernet0/0 8080

    RES

    Paul

  • Internal network and external network.

    Hello

    I want to use hyper-V to VMware workstation. I have a problem with that. I have 2 virtual machines, a server and a workstation. The server must be a router to an external network (internet) for the workstation.

    The server will be DNS, DHCP service and transfer to the workstation.

    In Hyper-V, it is easy, the server gets two NICS, one (internet) outside another internal. The workstation only an internal NIC work stations now takes an IP address from the dhcp on the server.

    When I try this with VMware, the workstation does not take into account server and get an address IP of VMware. Is it possible to change this, can VMware act here, as does Hyper-v?

    I thank the of for aid, Pit

    For the internal network, you can use the host only on VMware Workstation's network, and for do not receive not IP address of the DHCP server on VMware Workstation, you can disable the DHCP for the host only to a network using the virtual network Editor, see: VMware KB: using the VMware Workstation virtual network editor

  • Failed to create the external network

    Hi all.

    Well, I have deployed VIO with NSX. I created 2 virtual machines (instances) with 2 internal networks. I created router, plugged on both networks. Tried to ping of vm1 (int_net1) to the virtual machine 2 (int_net2) through router - everything works fine.

    So, the next step was to provide access to Internet of the virtual machines. I try to create the shape of external network Admin-> Control Panel-> network-> network create system:

    Name: extnet1

    Project: MyProject

    Type of network provider: dish (deployment master I chose NSX environment and VLANs separated to outside networks)

    Admin State: checked

    External network: checked

    When I press the button "Create network" an error has occurred: ""Error: failed to create the extnet1 network '. " How can I create external network?

    Thank you all for help. I solved my problem. For the future: you can only use "PortGroup" in Type of network provider. So when I chose PortGroup and set it to the external network 'dvportgroup-XX' have been created.

    controller01 2015-08-12 07:51:34.847 INFO [req-e17f7e0a-fd22-4f06-ba05-76c760b7d6f8 neutron.api.v2.resource None 11320] create failed (client error): Invalid input for operation: GRPE caught ports support only on external networks.

  • Problem of external network (Client)

    Hi guys,.

    After the transfer of my "production" environment, I am facing a problem with the external network (not API).

    On my lab environment it works fine, but on the production environment something strange happens: the machine can be put into service, but sometimes he gets 'customization' Openstack, sometimes not.

    Also, when it "works", I can reach a floating IP to one machine, and it works for something like 5 seconds, then this IP stops responding.

    I noticed that my switch TRANSPORT DVS Checkup complains to the VLAN ID 0 (which is not effective in these physical network cards), I use the VLAN ID 102 as the Vlan of Transport VXLAN. Is there something else I'm missing?

    My setup is composed with:

    -1 bunch of Mgmt

    -1 bunch of nova

    -1 bunch of edge.

    They are all on the same Transport area of the NSX, and connectivity to the Openstack API and the Mgmt API now works well I put almost present on 'production' (in fact it is an internal test with some users), but this external network problem is a show-stopper for me

    Thanks for the advice, sorry to bother you with so many questions

    Ah, an offtopic question: when you release the 2.0 version? Is it going to be compatible with the 1.0 version, or I have to remove and reinstall my whole environment? (VMworld, probably?;) (P)

    Thanks again!

    Reading your post, I understand that you have 2 numbers:

    Problem with the metadata service (give the host name):

    Communication to the metadata service works like this:

    Can you do some tests for me.

    1 test VXLAN connectivity between the ESXi-Compute (hosting your VM of Instance OpenStack) and the edge of ESXi (hosting your logical shared edge router)

    Ping ++ netstack = vxlan x.x.x.x (to test the connectivity of your IP)

    Ping ++ netstack = vxlan d s 1570 x.x.x.x (to test the MTU on the physical fabric is 1600 or greater)

    Note: x.x.x.x is the remote IP of VXLAN ESXi @.

    If this test does not work, then your VM can speak to its default gateway correctly.

    If this test does NOT work, then it is probably a problem with the physical fabric (VLAN misconfigured or MTU misconfigured).

    2 validate connectivity VLAN between the edge of ESXi (hosting your edge of metadata) and ESXi-Mgt (hosting your LoadBalancer VIO)

    . SSH to the VIO - WHO

    . then make a SSH for balancing load-VIO ssh loadbalancer01

    . can do a ping to Metadata Edge1 ping x.x.x.x (ping should fail, BUT you should see an ARP entry for that IP @: arp - na)

    Note: You can find the Edge Mgt IP metadata @ under edition of the edge metadata_proxy_router_xxx NSX and its uplink interface checking.

    If this test does not work, your edge of metadata can talk to VIO load balancing.

    If this test does NOT work, then it's probably a problem with the Mgt ESXi and ESXi points not to the same port of Mgt group.

    Problem with the external network:

    You validate people can talk to the VM floating IP @?

    If this isn't the case, it is probably because the edge of ESXi (hosting your logical shared edge router) is not on the right VLAN.

    Dimitri

  • Error with external / network API

    Guys,

    I'm doing some tests on my lab environment, but not over and over again.

    My deployment environment have 2 groups (mgmt and nova). The two have only 1 uplink, and the uplink is attached to a DVS with 2 groups of ports: management and external. Two of these PGs are related to VLAN 10.

    The problem is that, even the deployment is going well, I can not access the API networks (external load balancing, for example).

    I see LB machines have an eth0 (who works on the network in-house / balancing) and the eth1 with access 'external '. I am able to ping, the viomgr IPs on eth0 and the physical IP on eth1, but not the VIP of the eth1 (shown with ip addr command).

    I don't know if this problem is related to something on DVS, NSX or any other thing. I just installed and reinstalled my environment using any means of different configuration and it does not work.

    So I tried a stop of the load balancer and but this IP address on the machine eth0 and the API has worked well.

    No idea why this problem with networking occurs?

    Also, I tryied to set up NSX using frames, as well as MTU 1600.

    TKS in tips.

    Hi Ricardo,

    One of the VIO requirements is that the direction and external port groups should use different network addresses. From what you described, it seems that you are using the same subnet for two groups of ports. If you are not able to transfer using different subnets, use these commands to work around the problem (run on the two load balancers):

    sysctl-w net.ipv4.conf.eth0.rp_filter = 0

    sysctl-w net.ipv4.conf.eth1.rp_filter = 0

    It is not persistent if balancing charge are restarted. Note, that it is not a supported configuration and has specific security implications.

    Hope that helps.

    Best regards

    Karol

  • Get a next available external network IP

    Hello

    I am trying to automate the deployment of nested environments that require external network connections. I'm looking for a way to determine the next free IP available from a given external networks IP pool. I can get the list of IP addresses in the pool, the number used and total number total free but have been unable to find a method to show what is free then.

    There must be a way to get this information that the deployment of a new edge on an external network takes the next free IP available.

    Someone at - it chance with that?

    Posted this on my Blog, but here is the final code, application that I came that works for my application.

    http://www.justavmwblog.com/2015/05/vCloud-next-free-IP/

    functionGet-FreeExtIPAddress([String]$extnetName){

    $extnet=Get-ExternalNetwork-name$extnetName

    $ExtNetView=$Extnet|Get-CIView

    $allocatedGatewayIPs=$extnetView.Configuration.IpScopes.IpScope[0].SubAllocations.SubAllocation.IpRanges.IpRange

    [int]$ThirdStartingIP=[System.Convert]::ToInt32($extnet.StaticIPPool[0].FirstAddress.IPAddressToString.Split(".")[2],10)

    [int]$ThirdEndingIP=[System.Convert]::ToInt32($extnet.StaticIPPool[0].LastAddress.IPAddressToString.Split(".")[2],10)

    [int]$FourthStartingIP=[System.Convert]::ToInt32($extnet.StaticIPPool[0].FirstAddress.IPAddressToString.Split(".")[3],10)

    [int]$FourthEndingIP=[System.Convert]::ToInt32($extnet.StaticIPPool[0].LastAddress.IPAddressToString.Split(".")[3],10)

    $octet=$extnet.StaticIPPool[0].FirstAddress.IPAddressToString.split(".")

    $3Octet= ($octet[0]+"."+$octet[1]+"."+$octet[2])

    $2Octet= ($octet[0]+"."+$octet[1])

    $ips= @()

    if($ThirdStartingIP-eq$ThirdEndingIP) {

    $ips=$FourthStartingIP..$FourthEndingIP| % {$3Octet+'.'+$_}

    }else{

    do{

    for($i=$FourthStartingIP;$i -le255;$i++) {

    $ips+= ($2Octet+ "." + $ThirdStartingIP + "."+$i)

    }

    $ThirdStartingIP=$ThirdStartingIP+ 1

    }while($ThirdEndingIP-ne$ThirdStartingIP)

    for($i=0;$i-le$FourthEndingIP;$i++) {

    $ips+= ($2Octet+ "." + $ThirdStartingIP + "."+$i)

    }

    }

    $allocatedIPs=$ExtNetView.Configuration.IpScopes.IpScope[0].AllocatedIpAddresses.IpAddress

    for($i=0;$i-le$ips.count;$i++) {

    for($j=0;$j -lt$allocatedGatewayIPs.count;$j++) {

    if($ips[$i]-eq$allocatedGatewayIPs[$j].StartAddress) {

    $ips=$ips | Where-Object { $_-ne$ips[$i] }

    $i--

    }

    }

    for($z=0;$z-lt$allocatedIPs.count;$z++) {

    if($ips[$i]-eq$allocatedIPs[$z]) {

    $ips=$ips | Where-Object { $_-ne$ips[$i] }

    $i--

    }

    }

    }

    return$Ips

    }

  • Supply Machines on the external network of non-domaine Thinapps joined: invalid HTTP 404 status Code

    So, I want to put at the disposal of the thinapps of non-domaine joined Machines on the external network through the workspace. Is this possible?

    When I access the URL in such a condition, in the HorizonThinAppClient.log, I get the following:

    2015-02-23 08:48:43 [INFO] [9860.9344] [hzntaclnt::InstallDb:DownloadFileToCache] download https://workspace.domain.com/SaaS/API/1.0/rest/user/applications/download/edf74562-6c32-4BE9-8C3A-74f792de4d1e/Tm90ZXBhZCsrLmV4ZQ== at C:\Users\Joe\AppData\Local\VMware\Horizon ThinApp\PackageCache\Notepad++\HTA715B.tmp

    2015-02-23 08:48:43 [ERROR] [9860.9344] [hzntaclnt::HttpConnection:DownloadToFile] the code invalid HTTP status 404 (not found)

    2015-02-23 08:48:43 [ERROR] [9860.9344] [hzntaclnt::InstallDb:DownloadFileToCache] download failed, error SC_HTTP_RESPONSE_CODE (unexpected HTTP response code: not found)

    2015-02-23 08:48:43 [ERROR] [9860.9344] [hzntaclnt::InstallDb:DoInstallFile] download failed for "Notepad ++" (\\fileshare.domain.local\ThinappsHorizon\Notepad++\Notepad++.exe), SC_HTTP_RESPONSE_CODE (unexpected HTTP response code: not found)

    2015-02-23 08:48:43 [ERROR] [9860.9344] [hzntaclnt::InstallDb:Install] failed to install the package from the file ' Notepad ++ ' (\\fileshare.domain.local\ThinappsHorizon\Notepad++\Notepad++.exe): SC_HTTP_RESPONSE_CODE (unexpected HTTP response code: not found)

    What I have to be on the local network to download the Thinapp packages, or am I misconfigured? I already checked the user who runs has full rights to share inside and on the local network, it works fine, but when mandated by workspace it fails, probably because the client calls a share location, that it cannot reach. Anyone who encountered this?

    You use the option "Enable account based on access '? Please see VMware Workspace Portal 2.1 Document Center for documentation on how make thinapps available to computers not joined to a domain.

Maybe you are looking for