my whole macmini is glitching since software update

Similar Questions

• ipad1, glitched since the update update, died days later for no reason. tried to reboot, nothing worked. What can I do?

  I tried to post a question to the assistance of apple for the last 30 minutes, but every time I do it says "you are not allowed to create or update this content.

  but here's my question:

  ipad1, glitched since the update update, died days later for no reason. tried to reboot, nothing worked. What can I do?

  I'm sure it wasn't the update, but since I've updated the ios system with my ipad, it started with seeds, then just died.

  appreciate for all the ideas/help.

  Thank you and Bravo.

  Chantal

  < object edited by host >

  When you say that "nothing worked", what do you mean? Do you mean that the iPad does not at all? "That means" it seeds "means? What exactly you see it do? Have you tried a forced reboot (hold home and power buttons until the Apple appears, then let go and leave to complete commissioning). If it lights, try to restore from a backup using iTunes.

• CP 1518ni printer crash since HP software update using OS 10.7.4 (Lion)

  I did the usual update through software update for HP printers.

  The first impression I tried crashed once but then printed.

  Since then, I can't print Pages or other programs. Programs to plant about 20 seconds after hitting the impression. I restarted the printer.

  I use a fully updated Macbook pro, OS 10.7.4.

  Good news! My printer now prints!

  As I indicated above, I had an appointment on another case with Apple Genius Bar. When I checked I let them know that I had a second element that requires special attention.

  We looked at all the posts on this page. The tech said it sounded like a deeper problem in the operating system, while I had a complete to the top of my hard drive he recommended do us a cleaning and a reinstall of the OS (stay with 10.7.4 Lion). When I returned home, I used my Time Machine backup to restore everything EXCEPT such settings as recommended by the technology.

  I then tried to print a document. Asked me if I wanted to download the drivers. I said yes and 20 minutes later, I feel! I should note that the format of screenshot has been back to the original style (which was my preference).

  Thanks for all your help. I hope this helps someone else who has this persistent problem.

• BlackBerry smartphones software update of the device since 31/08/2009!

  Hi all

  I am living in the Kuwait and my ISP is Zain and the Kuwait.

  before 2-3 weeks, I got my BB Curve 8900 through the Application in my Desktop Manager 5 loader, when I run the update and after starting the application responsible for the search for new and legacy software, I get a list of software of the device (firmware) which are available for download and I can choose between versions , reinstall the current downgrade and improve.

  Since 08/31/2009, when I run the application loader - > software update, I still get no results and he says my software is up to date and im 100% sure that it's not because I went down before, the latest version was 4.6.1.250 and I installed it is 4.6.1.206 as the new version is not Arab.

  So my question is, why I can not get the list of device software, so I can choose the version I want?

  I've tried it on several computers and several internet connections and still he could not get it.

  Your answers are greatly appreciated

  concerning

  Khalid Al-Assousi

  Hello and welcome to the Forums of Support BlackBerry.com.

  Just do the upgrade manually... Download the file from the OS and use the instructions in this link.

  http://www.BlackBerryForums.com/General-8900-series-discussion-Javelin/193197-latest-OS-8900-4-6-1-3...

  Always, make a backup first, using the Desktop Manager.

• BlackBerry Smartphones Ever since my new software update, I can't use my browser on my blackberry torch!

  Last night, I downloaded the new update of the blackberry software. When I go to the update of the software screen, it says "latest version 6.0 package 2647.»

  I have apprently went from bundled software version 6.0 2342, at bunder 2647.

  I was not able to use my browser since the update, and I do not have wifi.

  Help?

  Hi and welcome to the Forums!

  I suggest the following, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message to your BB to come...) Please wait for this before moving on to the next step):

  (1) registry HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network

  (2) remove and return Service directories

  • KB05000 Remove the maintenance book for the BlackBerry Internet Service email account in the BlackBerry smartphone
  • KB02830 Send the directories for the BlackBerry Internet Service

  (3) restart to take batt

  • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If this isn't the case, then you should contact your provider of wireless services for formal support.

  Good luck!

• My iPad air2 will not charge after the software update

  My iPad air2 will load after 30 per cent since the software update. The software says that it is up-to-date (10.01). Nobody knows how to solve this problem, until Apple makes in the next update?

  Hello

  Try a reboot press and hold the power button / stop and menu button hold both down until you see the apple logo

  It may take 30 seconds

  See you soon

  Brian

• iTunes does not appear the option to check the iOS Software Update

  I have a 6 more than 64 GB iPhone with iOS installed 9.3.5, laptop HP Windows 7 (SP1). The latest iOS updates bit (of IOS 8 or 9, I did "over the air" rather than connecting to iTunes on my laptop.)

  This time, with 10 being released iOS and reading online on a certain number of iPhones in 'brick' update 'over the air', I decided to update by connecting via a USB/lightning cable to my laptop and iTunes.

  When you open iTunes on the laptop by clicking on the device (iPhone) and the 'summary', she properly showed the current software on my phone (iOS 9.3.5), but no option for "check for updates". He also says "Connect this iPhone with a USB cable in order to update or restore it is a software", which seems strange, because it is connected via USB and is recognizing the version of iPhone software up-to-date and correct. After not being able to understand why, I have found also that iTunes 'control upgrade' says that v12.1.1 has been current. After some research online, I came across a Web site that shows iTunes was up v12.4.3 at the time of writing. Therefore, I went on Apple's site to update iTunes, as I couldn't do to in iTunes itself. I found that the latest version is 12.5.1.21 I downloaded and installed (without uninstalling the previous version first). Still the same problem. Then, I uninstalled this version latest and updated to iTunes on my laptop and reinstalled. Still the same problem.

  I was able to 'Sync' and the phone to iTunes with no problem at backup.

  Can anyone help please?

  Post edited by: colboy58

  I considered just take a chance and update the iphone software app 'Settings' of the phone with the ability to do a "restore" via iTunes on the laptop if I ran into problems. Then, however, I found that the button "backup restore" in iTunes was "greyed out" and not "clickable".

  Hi colboy58,

  Thank you for using communities Support from Apple!

  If I understand your message that iTunes appears that a software update is available for your iPhone 6 Plus. Since iTunes showed previously that it was also updated, there is probably a problem with the security on your PC iTunes software to communicate with our servers.  Please follow the troubleshooting steps in the link below to get started:

  Solve the problems between iTunes and third-party security software

  Take care.

• Older A1138 Office do not restart after software update?

  I have worked on an old Mac Office since last night, think that the owner said it is a model of A1138, do not see anything in the associated model anywhere on the unit. The OSX Snow Leopard loaded very well so I ran the software update, but after that he showed that is was downloaded and restarts, it seems being stuck at this time, should I shut down and restart or how much time should I wait please?

  Sorry to not give more details. Guy brought this machine for me yesterday. He said his tenant that moved did not have to take this very old and heavy machine for him, then the tenant given to him. The owner however gave him the unit without the disc hard OSX but hard left 2 discs in there for him. So, I loaded 10.6.3 original CD-ROM from Apple on this topic. I'm trying to upgrade from 6.3 to 6.8, but after he showed that the updates have been downloaded and restarts, it seems to be stuck at this time here with just the 'outer space and stars' screen purple color, should I shut down and restart or how much time should I wait please?

• Since the update to El Capitan, during the scrolling of the screen guard snapping back to the top of the screen. How can I stop this?

  Since the update to El Capitan, during the scrolling of the screen guard snapping back to the top of the Web page. How can I stop this?

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• Help with software updates for HP Officejet Pro L7500 Series

  Five updates have been identified as available when I used 'check the software updates' Solution Center.

  All updates failed to download. The updates are:

  Update critical HP product Assistant

  Critical update for HP memories disc creator

  HP update - security update

  Updated HP 4.0.12

  Update recommended to correct a problem with the sign up now product registration page

  TDA, since these updates are not required for your system and your printer that updates could not be installed on your system, however if you want to see what updates are available, then this is the web page to select your printer model, and then select your operating system and you can see the updates you need to update for your printer :

  link to select your printer model

  Once you click on the link above, you must click your series of model and then in the next page, click on drivers and software download link to see available software for your printer.

  Hope this helps you.

• Software update gets stuck to connect to the update server

  For a very long time (since Firefox 4 or more), I'm notified of updates, but when I say update I just get a window that says it has download firefox and it connects to the update server and it stays there forever. I left open for days and it never goes away. I've always had to go download a new copy of updated, but I really like to get the auto update work.

  I tried to delete history/cache/etc for ever. I deleted everything related to Mozilla AppData, I lose everything, but always the software update gets stuck. Of course, he's stuck something other than trying to connect to the update server. Any ideas?

  I suggest you to go through the path alternative and easier downloading of

  • getfirefox.com

• Software update service: push updates to clients

  Hi all

  I just set up OS X 5.0 for the first time, so it is all quite new to me. Is it possible to get the OS updates from the server to clients registered? I read about the differences between the update server and software of caching, and since you can't run both at the same time and think the update service is more convenient if we consider only provide updates to OS X clients. My understanding is that users must apply the update on the app store, but is it possible to push updates to clients instead? Even a command would be useful, so I can run remote commands from the terminal on any client, but really, I'm open to any suggestion.

  Thank you very much

  E.

  Welcome to the forums.

  So, there's two ways to look at this issue.  You can "push" updates to customers or you can tell customers to "pull" updates.  Let's look at a few options.

  If you go the mentality of 'push', you must visit the Apple website and download individual installers or use a master machine to pull updates from the App Store.  Then, you can use tools from the Apple Remote Desktop to JAMF to deliver these updates for client devices.  It can exercise a level of control that determine only you, the doorman, where the devices are updated.  However, several updates require reboots if you need to be selective in your calendar, because you don't want to pull the rug out from under a user.  In addition, pushing updates to date still require local execution of the installation program.  If you do not have a command on all devices administrator account, you will not be able to allow installation.

  Now, you can also "pull" updates.  Indeed, this is what happens when you run the software update manually.  Ah, but there are options that you have found.  You can just pull everything Apple, but if you have a slow Internet connection and a lot of features, you can paralyze you.  You can deploy the software update server, but then you get everything from Apple for the past 8 years, that 90% you do not want.  Oh, and the software update server means that you need to customize each device with custom update path.  If you deploy portable computers, which means that they must be on your local network to get updates because the substitution is supported by a URL.  The last method is through caching server.  Caching server requires no customization of the client side and puts in cache only what you ask.  The first device application will require a download to Apple, but all subsequent devices can pull out of your cache server.  Very effective.

  So, you decide to enable a client 'pull' and realize that the caching server is probably the best way to do it.  Ah, but you still don't want to visit all the machines.  You can use the softwareupdate command-line tool to perform an audit of software across the entire fleet (softwareupdate man for more details).  For example, let's say you have 10 machines and you have Apple Remote Desktop.  You can send a Unix command for all 10 machines such as: softwareupdate-i - a

  That command will tell each machine to install (-i) all (-a) updates available.  You can also target specific updates so if you need to be selective (Apple released iTunes and an updated OS the same day and you don't want to push iTunes until you post the update of the OS for example).  softwareupdate-i NameOfiTunesUpdate.pkg.

  Reid

  Apple Consultants Network

  Author - "El Capitan Server - Foundation Services.

  Author - "El Capitan Server - Collaboration & control»

  Author - "El Capitan Server - Advanced Services '.

  : IBooks exclusively available in Apple store

• Problems to send pictures through text, given that I have software update 9.3.1.

  Since I updated my software to 9.3.1 I was not able to send pictures through e-mail

  Here are the steps of troubleshooting for MMS:

  • Make sure that you are connected to the Internet through cellular data or Wi-Fi.
  • Go to settings > Messages. Check that the type of message you are trying to send is lit (iMessage, SMS, MMS or e-mail group)
  • Restart your device.
  • Looking for a carrier settings update.
  • Looking for an updated software iOS.

  If it still does not work, contact your carrier.

  If you cannot send or receive messages on your iPhone, iPad or iPod touch - Apple Support

• As many problems since the update of the iPad iOS 9.3.  Grrrrrr!

  Since the update last night, here is the list of issues, I can't seem to fix OR find answers to solve:

  1. cannot connect to iCloud.

  I have already reset my network WiFi settings, did a restart of the force and also changed my password on icloud.com.  Nothing works.

  Whenever I put my password, it keeps "check failed: there was an error connecting to the apple ID server.

  2. continue to try to get into "iTunes and App Store, my iPad, but the whenever I do, the iPad hangs and I have to do a restart of the force.

  3 - unable to restore iPad from iTunes because I can't iCloud to work so I can't disable "Find my iPad" to do a restore

  4 - my whole iPad slowed to a bloody crawl and I constantly reboot of the force. »

  What the DEVIL's going on with this update and my iPad?

  Unfortunately this is a royal mess and you are part of a large number of serious problems. Take a look under settings > general > topic > Version and please tell us which version downloaded. We may be able to offer suggestions based on what you have.

  Also, please take a look at this summary by a very experienced user.

  For those having issues with the iOS 9.3 update please read...

• software updates to iOS

  I've recently updated since an iPhone4s with iOS7 to an iPhone6s with iOS9.  I vaguely remember that in:

  Setting > general > software update

  There used to be an option to 'automatically' download updates (but not install).  From:

  Update the software on your iPhone, iPad or iPod touch - Apple Support iOS

  It seems that the option is no longer available.  It seems that now you type 'Download and install' and then you have the option to install now or you can choose to install tonight or remind Me later.  Is it true that iOS downloads are is more "pushed" to you or am I missing something?  Not much else - everything just curious.

  Javaliga, they are always driven. They were pushed both my iPhone and my iPad - when it is connected to power and Wi - Fi as you know.