My wifi network does not connect automatically

Similar Questions

• WiFi password has changed now my WiFi Repeater does not connect

  to change my WiFi password now my WiFi Repeater does not connect, anyone got an answer for me.

  to change my WiFi password now my WiFi Repeater does not connect, anyone got an answer for me.

  Connect to your WiFi Repeater and set the password to match the password for the router.

• iPhone connects to the wifi but does not connect to internet

  I have an iPhone running iOS 9.3.2 6s (last updated).

  The phone connects to the wifi network, but even if it's to show the signal strength is good, the phone does not charge any internet content (weather, FaceBook, email, etc.).  If I disconnect WiFi and use the data, it works very well.  We have no problem connecting to the computer or a smart TV network wifi and internet connection.

  This also happens with my daughter 5s iPhone and iPad for my son.

  Sometimes it will work fine on wifi, then a little while later I can't get anything to load. And it can be like right now when I'm at home alone is not as if there's a big load on our wifi.

  We have high-speed internet by cable (25 MB/s download speed) and a router Lynksys EA3500.  Encryption is set to WPA (not WEP).

  I tried to go into my phone settings and reset the network.  Always problems.

  It's really frustrating because you eventually switch to our mobile data and use it instead of our data ' wifi '.  And then to go on our data on our phone plan

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

  Council: https://discussions.apple.com/docs/DOC-9892

• Router E1200 works not - error 3005 (and network does not connect by hand)

  I am trying to put in place a new monitor of N300 E1200 and am not having any luck. Using the Cisco Connect ends with an error in step 'Validate the connection' each time, telling me:

  Error: 3005

  An HNAP call to the device failed because the HTTP connection was broken.

  (If it is relevant, the serioal number, type of connection and IP (WAN) all happen as "unknown" in the details of the error).

  I am able to set up the router manually via the access by web browser. I can name the wifi network, set up security, and even see and authenticate to the network of my devices, however, no connection is available when it is connected. (The internet connection is good - when I move the incoming cable between the router and computer, I instantly have access - so perfect this post)

  I also tried all the basic steps of reset and restart all involved several times, but I always end with the same result - 3005 error in the application configuration, then on a manually configured wifi network that seems to be working and can authenticate devices, but does not include any internet connection.

  I am at a loss at this point - here someone has any advice? Thank you very much for your time and input.

  -e.

  Then you must configure PPPoe in the router, unless your ADSL modem is already acting as a router and not the PPPoe.

• iTunes crashes if its wifi network does not have access to the internet

  Hi all.

  I'm running a 13 "mac book pro with OS X El Capitan.

  I have a very specific problem of iTunes which is really bugging me.  I'm a pro saxophone player and part of my job is performed as a soloist with playbacks on my mac.  To avoid having to walk to the mac to start the track to accompany each song, I use a tablet on a stand that I can place anywhere in the room.  I've set up a router next to the mac that the mac and the tablet of connect to, and I run "retune" on the Tablet (I think it's that his name) which is a wifi iTunes remotely.  Installation is really smart cos he allows me to choose new avenues of selection from anywhere in the room instead of walking back and forwards to the mac every time.

  The problem I have is that sometimes maybe (1 to 5 times), I have a real problem from iTunes when the mac is connected to a wifi network that has no real internet connection.  I'm sure that iTunes detects wifi connection and then tries to access the internet to connect with the store.  When he is not in the store it just crashes and I get the spinning wheel of death.  Most of the time, I can simply restart the program several times and finally he decided to play ball, but it's a real pain.  And I did a concert yesterday where he would not have enough, no matter what I did.  If I had no choice but to turn off the router and keep walking to the mac for each song.

  I can't find a setting anywhere on iTunes that can disable the connection to the store and I really am stuck.

  I also tried alternative programs (I used Clementine briefly but I just found it too flakey to be invoked) and so I am open to others suggests.  But I need a player who has a remote app that I can use on my tablet.

  Thanks in advance for the help.

  I use an older version of iTunes and in the preferences a lot, I can disable Store, Radio, sharing services, probably genius if I got it. Check all your preferences settings including those you think don't matter such as parental preferences (this is where the store is hidden on mine).  Realize also that iTunes has turned into a simple multimedia player to a 75% of sales and marketing as well as the do-it-all tool (aka bloatware) try too many at once and developers can't even imagine someone (i.e. the daily target user) use it without Internet.  Add on that you try to use an application to control iTunes and something like that is likely to misbehave, willy nilly whenever Apple launches an update.

  Don't forget with wi - fi you are subject to interfering signals other wi - fi services in the region or the stage equipment.

• Satellite R630-149 - WiFi network does not

  Hi all,

  I install win7 ultimate on Toshiba Satellite R630-149 currently, I have install all the drivers on the toshiba for the model specific, all site works ok except wifi,.
  When I go to Device Manager, said that need drivers network controller, but I all ready to install it.

  On the laptop with the position that the leds show what work it shows that wifi does not and even I press button function + F8 enabling wifi...
  Can someone help me please?

  Hi mpoultokis,

  You probably installed the wrong driver WLAN? Did you already check that the WIRELESS card is installed and if it s the correct driver?

  This document can help you to identify the right WLAN card and find the driver for it:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

  Check this box!

• 2000-2120TU HP laptop: Wifi network does not detect

  Hai,

  Recently I reinstall windows 7 on my laptop. Now it does not detect wifi networks.

  Hello:

  Have you installed the driver for the wireless card?  Otherwise, you must...

  This package provides the driver to support the Atheros Wireless LAN card in the laptop models running a supported operating system.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56572.exe

  You also need the bluetooth driver for this model wireless network adapter.

  This package contains the driver for the Atheros Bluetooth 4.0 installation package + HS in the laptop models running an operating system supported.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56573.exe

• Wireless network does not connect

  "At the time to choose a wireless network to connect to, the computer keeps turning of ' acquire a network address" to "not connected".  Can I have a virus?  The key of wireless network has been re-verified.  The wireless card find several near by network and seems to work very well.  I did not change any system and this just started happening.

  If you get an error message, please report completely, without paraphrasing.

  I know you said you checked your wireless network key, but please try the following (assuming you use Windows to configure your wireless network card):

  1. Open network connections (start > run > ncpa.cpl > OK)
  2. Right-click on the icon for your wireless adapter and select Properties
  3. Click on the tab 'wireless networks '.
  4. In the list of "Preferred networks", select your network and click 'delete '.  Unless you regularly visit other wireless networks or have a specific reason to keep the configuration of a particular wireless connection, I suggest that you remove all entries in the list or favorite networks.
  5. OK your way out.
  6. Go to "View available wireless networks" and connect to your network.

  If this does not help, I suggest to delete again your network wireless in the list of preferred networks (see above), but now utility access to your router configuration using a computer connected to the router by Ethernet and temporarily disable all wireless security features.  As a general rule, only wireless security should be the wireless encryption, but if you have configured additional barriers, such as MAC filters or time restrictions, turn them off as well.

  Can connect you to your router without active wireless encryption?  If so, re - activate the encryption on the router using the Ethernet-connected computer, making sure that you know which has been entered into the router for the encryption key (utility router configuration most show the key to encryption "in the clear" so that you can read).  Then try to connect wirelessly.  When you access the key this time, it should work.

• A PC on the network does not connect to internet

  This has proved to be very difficult.  A PC on my network has been to connect to the internet.  I thought it was because I installed a new router, especially when I moved the PC to connect directly to my cable modem - when he was working.  But I also thought that upgrading to Windows 7 from WP would take away any problem on the PC - but it didn't.  Thus, with the help of an expert on a Linksys forum, I've implemented (to my satisfaction anyway) is not a router problem.  Indeed his inspection of ipconfig/all and stuff has shown that everything was normal with this PC as well as others.  The PC collects the IP address, etc., it is simply not receiving data from the internet.  I had already checked that it was not a firewall, using Norton Uninstaller issue to ensure that everything was gone.  The network adapter works and I've updated the driver.  I have since also rolled back to XP for doing the same thing and still nothing.

  The expert from my router comment was "well, the IP of the computer configuration is correct and the router works as you have other computers that connect to the internet via the router. It seems that if the installation of Windows has serious problems on this computer. I suggest that ask you in a Microsoft forum on how to reset the configuration of the network on your computer to make it work again. So far I would say that it is not a problem with the router or caused by the router. »

  The only thing I would add is that system restore has failed for a while on this PC.  Of course I would have used it to try to solve this problem, but I can't.  I tried various fixes for whom these for one, there included opening in SafeMode etc, but nothing worked.

  Help please!

  Hi, sorry bit slow on this - alert does not.  The answer would have been wired and Wireless does not, but I just reinstalled a Linksys network adapter and hey presto it works!  I haven't been back to try the wired LAN but guess it still does not.  So I think that the diagnosis of network card is OK but incorrectly excluded earlier because the PC said that he was OK and wireless did not work either at this time.  But I guess it's possible that uninstall and then reinstall the Linksys may have released something somehow.  BTW I had disabled the native Windows Firewall also.  Was it wrong?

• Z3 wifi Xperia does not connect

  Hello, I just got my Xperia Z3 but wifi is not connecting.
  He cannot get an IP address when the DHCP option. If I change my static IP address, it will connect to my router but will have no connectivity. It's the third router that I tried to connect. All other devices work fine, including a Xperia ZL, iPad, iPhone, Mac mini and MacBook Pro.
  Please help, thanks!

  I discovered that my problem was due to the use of an extension of wifi. I have reset the device and now I can connect fine on my Z3 and other devices.

  Thanks for the help.

• Lumetri does not connect automatically to the LUT

  Hey!
  I'm using an AE project, I did not start the project. The guy already color classified video. I'm recovering what he was doing. This project was created for the correction of color with Lumetri on AE. The problem is that the entrance READ does not automatically bind to the LUT. Same thing for parts of 'creative Look '.
  I asked the person who starts the project what LUT he used. I now have the LUT entry correct.
  I don't always have the good 'creative Look', cause on his project in front of 'Look', he wrote "Custom".

  Can we found that look had been used?

  Thank you

  Yes thank you, that was the problem. Solved by re-downloading the CC2015.2.

• Atheros AR9285 802.11b/g/n WiFi Adapter does not connect.

  I have a HP DV6 3049tx windows 7 64-bit, which have an integrated Atheros AR9285 802.11b/g/n WiFi Adapter of the for 1 month I am not able to connect to any network if a list of available wireless networks. the error msg that says is Windows is not wheat to connect to the network. My version of the driver is 8.0.0.238. What can be the solution Please HELP!

  Hello harshsinha,

  Take a look at this page http://goo.gl/7sjsm

  All drivers and updates are found on this page. Check inside the Networking section and you will see an Atheros driver

  This document here http://goo.gl/Vnwiu will give a few wireless troubleshooting steps that will help.

  Please let me know if this helps solve your problems.

• Linksys e4200 with wifi direct does not connect to the kdl-48r470b

  I just bought a Sony kdl-48r470b tv of the grand prix of Wal-Mart and image, but with the info on this tv being ill not do now to the community for help here.

  Im trying to connect the TV via wifi direct to my router from linksys e4200. the router has wifi direct.  my pc is connected to the router via a network cable. the idea here is that I want to push films to the router, then to the tv via wifi direct.

  the problem is that the tv refuses to connect to the router told me just recording failed. Ive tried the pin of my router still nothing ive disabled the security still has nothing, Ive used the method push button and still nothing.

  is it possible to connect to the router? IM thinking this way because it has direct wifi.

  I contacted sony 3 days ago and have received zero responses from them

  Thanks in advance for your suggestions

  So what you saying is this TV is not able to sell the linksys router? I'm still so confused with this TV... If it says built in wifi, you should be able to connect to your router... looks like there should be a way...?

  very irritated by this situation!

  Thanks for the quick reply... too bad sony can't come back with me with a solid answer... or I could at least understand the rep...

  Denise

• M70: WiFi adapter does not connect to the wifi Lan

  Hello
  I have the Satellite M70-122 with an Intel PRO set wireless adapter 2200BG Driver version 9.0.2.25. ConfigFree radar screen correctly identifies the wifi router of my Motorola, but when I click on and get the router on the icon of the laptop, no connection is established and there is a message that says:
  "Sell another application is controlling the wireless card."

  I disabled the "use Windows to configure my wireless" box under settings to connect wireless but no luck.

  In addition, there is no wifi adapter icon in the status bar, or I can get to a window with the settings of the adapter to enter the SSID and WEP details.

  Any help will be appreciated.

  Hello

  Have you used a tool of connectivity like Atheros WLan client utility?
  On WEP:
  PC card encryption is hardware specific. Maybe if it of not possible to use WEP encryption, because the card doesn t that supports.

  Please also see this page:
  http://support.Intel.com/support/wireless/WLAN/pro2200bg/index.htm

  Good bye

• Specific wireless network does not connect in Windows 7, but does in Windows 10?

  I have a Toshiba Satellite L750D laptop, it is about 3 years old now.

  I use Windows 7 for a while. Everything works fine to connect wireless at home and more than other wireless networks, but the hours was spent without success to get it to connect to the wireless work (Ministry of education, that's why this included fiddling around with the proxy settings and user authentication options). I got it to connect properly this wireless in the past, but to another school.

  I had given up on actually being able to use internet in my class to improve the education of students.

  I upgraded my computer to Windows 10, then suddenly, following the same steps that we had tried before, my laptop had no connection to detnsw disorders. Hooray, 21st century learning!

  Unfortunately, some of the hardware in my computer graphics or something couldn't handle Windows 10 (or I couldn't manage Windows 10 and what he did to my outdated laptop), so I had to use the restore function, which came back my computer to Windows 7 without having to format my computer and re - install Windows 7 from an external source.

  Now she continues to refuse to connect, even advise that to contact the network administrator.

  It's driving me crazy. What is different between the 2 operating systems that allows to connect without fuss one way and deny the other way?

  I have triple checked everything I could think of that could prevent the connection, including the drivers and my antivirus, nothing helps.

  Is this just a case of Resistentialism that cause me to seriously consider spending the money that I have not currently on a new laptop just so I can show the occasional Youtube educational video?

  Has anyone else had a similar problem, or is it just me?

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  The problem may occur if the network drivers are not correctly updated or you need to change the network settings.

  Method 1: Please follow the steps described in the article Microsoft help to the given address:

  Using the troubleshooter from network in Windows 7

  How can I troubleshoot network card?

  Method 2:

  I suggest that you change options for both the systems on the network in the Advanced sharing settings (Open Network & Sharing Center > Advanced sharing settings to change):

  -Enable network discovery

  -Turn on the file and printer sharing

  -Turn on sharing so anyone with network access can read and write files in public folders

  -Turn off password protected sharing

  Now, try to map the drive, follow these steps:

  1. click on Start, click on computer and click map network drive in the options under the address bar.

  2. in the drive box, click the drive letter to use.

  3. in the folder box, type \\server\share, where you can type the IP address of the drive to be mapped. For example, if the IP address is 192.168.6.xxx, you type \\192.168.6.xxx.

  4. click on Finish.

  Let us know if you need more assistance. We will be happy to help you.

  ___________________

  Thank you best regards &,.

  Isha Soni