My wifi Telstra
My telstra wireless is security coded, but when I connect to the internet, a warning is displayed stating 'information sent over this network might be visible to others' Windows what it means & is my secure connection?
Hi, Andrew,.
Connections Wi - Fi public do not usually use any encryption. This means that anyone within range of the network running the right software might intercept the data you send over the network. Keep in mind that the data could include passwords and other sensitive information. As a point of interest, even on encrypted networks, the person using the network can intercept all data sent on it, since they have access to network hardware. You must never connect to networks you trust.
Don't use not all public networks for something sensible, the best way to protect yourself is to make sure that all of the websites where you enter a password using an HTTPS connection. This type of connection encrypts data transmitted between your browser and the web server, so even if someone is intercepting network traffic they will be unable to read. Many websites, including Facebook and GMail can be configured to use HTTPS by default. It is also possible to force a HTTPS connection on some sites by changing the URL in the address bar browser, replacing http:// https://.
A second option would be to set up an encrypted VPN (Virtual Private Network). All internet access would go through a server on the VPN, that could be a computer on a network that control you or a third party. However, the VPN can be difficult to implement and are probably overkill for the average person.
-Smitchell-
Tags: Windows
Similar Questions
-
Satellite L500 - how to set up the WIFI connection?
I'm having all sorts of dramas trying to get my new L500 connected to the my Wi - Fi. Receipt the run around of Telstra Bigpond, then Microsoft who are charging me $80 only to tell me that I have to contact Bigpond...
After talking with Bigpond they advised that I need to "configures Intel PROSet / Wireless" because it prevents me to connect to my Bigpond connection...
Can someone throw some light/provide any assistance! I'm getting desperate :(
Thanks - my email is [email protected]
Hey nic,.
You must give us more details about your problem. Your explanation is very deep and so it might be a little hard to give exactly the instructions how to resolve you this problem.
First you make sure if your wireless network card is listed in the device correctly without yellow exclamation point Manager.
Then, make sure that the WIFI is enabled with the hardware switch and FN + F8.You see the WLAN router if you are looking for WIFI networks at your fingertips? If so, can you connect or you get an IP address?
Also check the DHCP of your laptop configuration and disable the Save function in the energy WLAN Vista power management. -
iMessage works only with cellular data, only in wifi since the last update
I did a few days ago was last updated (iOS 9.2) and since then I can only send and receive text messages to cellular data no iMessages, I have friends with iPhones that messages are only of text messages sent and received as, even if we have all two iPhones! I get this message when you try to activate iMessage "enable mobile data or use the wifi to configure iMessage.
I turned on wifi and it accepts the iMessage parameter, but once I go back to the cell data, it shuts down my ability to send iMessages! I'm on a plane, so no credit, turned the phone on and off, have three bars of service (Telstra in Australia)... help anyone? !
AAnd I tried all the steps on the page provided by Apple iMessage is not available when I try to turn it on?
-
Hi, I desperately need help to connect my PC at home that runs on Windows XP SP3 to my Wifi network. Currently my laptop (Windows 8) and the tablet of my wife are connected to the WIFI network but cannot connect the desktop home PC. Did some research and discovered that the driver wireless 802.11 g/n is missing from the network adapter in the Device Manager. I suspect that this as being the cause of the non-connectivite but how do I download and install this driver wireless to the computer?
Can you please provide me with the simple steps to follow for installing this driver wireless 802.11 g?
Emergency response required by the circumstances.
See you soon
Robin Wavite
Robin,
It's the support page from Dell for your computer--> http://www.dell.com/support/my-support/us/en/04/product-support/servicetag/JHDFR1S/config?s=BIZ
As near as I know, your Optiplex was conducted in Australia. If you are indeed in Australia (and you probably, if you have a modem/router of Telstra), I have no information on what products could be made available to you or where you could buy them.
My personal preference would be an adapter that includes a cable for the antenna is not positioned between the back of your computer and the wall. However, if your computer will be less a few meters from the router, there is not much difference, and you can use an adapter that looks like a USB key (or smaller). My guess is that all of the products on this page might work for you--> http://www.mwave.com.au/networking-wireless/adapters-addon-cards-wireless?view=40&pricerangeid=1&filter=383%3Dusb&filteroptions=383%3Dinterface that the correct driver should be included on a CD supplied with the appliance.
-
HotSpot WiFi connection but does not share internet connection
Hi all
I have a Sony Xperia Z2 running version 4.4.4.The problem is that when I create my wifi hotspot to connect my computer, with the network will be created, but no internet is available via the connection. I tried to connect several devices to my hotspot of phones, and none of them are able to access the internet.
I updated lately and I think that is where the problem comes from. Any help on the matter would be great.
Thanks in advance.
LINCAFN Telstra.wap is incorrect. You will need to make a new following.
Press the sign beside APN + and enter the details below.
Name: Telstra Internet
APN: telstra.internet
Once these areas are filled simply save and use the camera instead.
Let me know how you go.
-
HPEnvy4500: Printer wifi
My printer do not connect to the wi fi on my new Telstra 5 GHz network. Why? it connected ok to my previous 2.4 GHz
Hello
Because its wifi card DOESN'T support 2.4 GHz. connection to 5 GHz won't print more quickly. You need to talk with the guys from Telstra to allow the network to disseminate the DOUBLE bands.
It is around for another few years.
Kind regards.
-
I just bought the photosmart printer 5520. I don't have wifi at my house yet, but I'm trying to get mobile wifi with Telstra with a device that allows to connect up to 5 devices at a time. I will be able to print from I phone or ipad if both connect to this device?
Hello
More likely, the answer is no.
Is this device provide connecting local area network (LAN) or internet access broadband?
If this device provides LAN connectivity that is possible devices can have internet access but will not be able to communicate with each other via the local network.
As a work around you may use the feature Direct to the router wireless, but you will have to switch networks in order to print:
http://support.HP.com/us-en/document/c03269394
Shlomi
-
Mini iPad won't find new wifi network
Recently, we got a new router and each of our devices picked up the network very well except for my ipad. When you go into the wifi settings it shows no network at all.
Hello
Try a reboot press and hold the power button / stop and menu button hold both down until you see the apple logo.
It may take 30 seconds
See you soon
Brian
PS make sure that its not on airplane mode.
-
2 Air 10 iOS iPad dropping wifi
I have an iPad 2 air in perfect condition, since it first came out. I have the cell phone/Wifi version with Verizon. My problem has been lately, when connected to wifi, the wifi shuts on the iPad many times when using, and more so at rest.
Did somebody encounter this problem since upgrading to iOS 10 It is the only variable that has changed, I'm still using the same networks that I have always used for Wifi.
Follow these steps to find and correct the problem:
1. you must check your Wi - Fi router: check if other devices can be connected. This will let you know if there is a problem with your Wi - Fi router. You can restart your router and restart the connection to WiFi.
2. make sure that Wi - Fi on and you can see your network
3. go to settings on your iPhone > Wi - Fi and check if it is enabled. And if there is a blue check mark next to a network name means that your iPhone or iPad was connected to this network.
4 restart your iPhone/iPad, router, cable/DSL mode
5. If this does not help, reset your network. On your iPhone, iPad, got to settings > general > reset > reset network settings. This will reset Wi - Fi networks and passwords, cell parameters and VPN, and APN settings you used before.
These measures should help.
-
My iPad Apple 3rd generation wifi + his cell phone does not work
MY 3rd generation Apple iPad, wifi + cell
model number MD408LL/a
Serial number DM * VGL
THE SOUND DOES NOT WORK
< personal information under the direction of the host >
All sounds, or simply notification and sounds apps (for example do music and videos app still have sound)? If notifications and apps you have notifications on mute: on the iPad side switch - Apple Support ? If the sounds in all applications which have tried for example soft-reset/reboot of the iPad, insert/remove the headphones?
-
iPhone 7 - 10.0.2 - would not connect to wifi - got hot - DEATH
I have an iphone brand new 7 (black) who has not seen a bump, the knock, the drop of water, or frankly anything that could damage it - always used with Chargers apple and cables only. I came home one day and noticed that my wifi woulndt connect. He would not even see the networks. The phone started to get hot and the battery percentage began to collapse, down 80% to 0% in about 15 minutes.
When I tried to reconnect to the power, it will not even turn on, nothing, no display showing load or anything like that. Just completely dead.
Ive owned every single iphone (except some S models) and have never had this happen. In fact, I could plug in my iphone 3gs right now and I'd be willing to bet $100 it load up and turn right into. Im just stunned, having given apple credit both for making bulletproof devices for years.
What's the deal? anyone else having this problem? Ive looked online and I can't find anything. I have a genius appt tomorrow and Im prayer I can get a replacement same day. I have applecare +.
Thank you
George
If there is something wrong with the device, Apple should replace it. However, they have the final call, and no one here can say exactly what they will do. Given the age of the unit, I suspect that you won't have problems getting a replacement. They should have stock for replacements. I wouldn't worry.
-
I have problems connecting to the WiFi at the hotel, as I have upgraded to iOS 10. When I try to join, I get a message "safety recommendation", and then it does nothing else. Prior to the update of the iOS, it would open an another Popup screen that lets me enter the password for the hotel but is not past with iOS 10. How do go?
Please read use captives Wi - Fi networks on your iPhone, iPad or iPod touch - Apple Support.
You may need to deselect Auto-Join and/or auto-connect on some networks in captivity. Otherwise, it may seem to connect for a second or two, only to disconnect immediately, leaving you without the possibility to open a session.
-
After the update my wife 5 iPhone and my iPhone 6 ios 10.0.2, we met problems. His phone will not ring when a call comes in, and my phone does not sound an alert when a message arrives.
Hi MikeDallos,
I understand that after your wife 5 iPhone update and your iPhone 6 the new iOS, you both know questions in regards the phone doesn't ring do not or may not alert you to the alert notifications when you receive a message. I use my iPhone all the time and I count on the possibility of having my phone alert me for incoming calls and messages. We'll see what we can do.
The first thing I want you to do is to restart the two iPhones. Make sure that your wife's iPhone has the ring/silent switch on mute.
Restart your iPhone, iPad or iPod touch
Here is an article that goes on measures to be taken for this issue:
If you hear no sound or distorted sound from your iPhone, iPad or iPod touch speaker
For your iPhone you did not give a warning sound with message notifications, you'll also want to review this article as well:
Use the Notifications on your iPhone, iPad and iPod touch
Please tender back if you still have problems.
Have a great day.
-
Anyone having problems with WiFi connectivity after upgrade to Sierra?
I was wondering if anyone else knows issues with WiFi connectivity since the upgrade to Sierra 10.12? I have not had any problems with connectivity WiFi previously on El Capitan. Now I have regular randomly loose connectivity. My internet is cable and when it is connected I have a 100% connection. My details of iMac and I have used only 10% of my storage.
No problem with my iphone 6.
Hello AspDesigns,
I understand that, since the upgrade to Mac OS Sierra, your Mac seems to have trouble staying connected to Wi - Fi. Fortunately the diagnosis built-in wireless can help identify the source of so much trouble.
Search for Wi - Fi using your Mac problems
See you soon!
-
Unable to connect to wifi since the 10.0.2 update
I can't connect to wifi since updating to ios 10.0.2
Hello
Try to force reboot your device: restart your iPhone, iPad or iPod touch - Apple Support
If this does not work, reset your network settings: http://ee.co.uk/help/phones-and-device/apple/apple-iphone-6/apple-iphone-6-inter net-and-applications/iphone-6-reset-netw...
Maybe you are looking for
-
I have a new Mac keyboard and it says that I should go to the Apple icon and select software update. There is no software update under the Apple icon. Now what?
-
Hi all Source:-elxcna (adapter Emulax CNA)Event ID:-129Error:-\Device\RaidPort1, restore the device, has been published.Server:-Server Rack, Windows 2008 R2Installed application:-installed Backup tool and IBM tape library connected by Cisco nexus swi
-
Using Windows Movie Maker on the error message XP__ not indexed _ bad quality
I use Windows Movie Maker XP (version 2.1?). I've converted and imported a lot of videos. I have a group of short videos recorded the same day. I (with free STROKE) converted to AVI and they play with no audio and several play accelerated. I've t
-
Program does not run on Windows 7 Desktop
When I go to start a specific program that has been installed on the computer using a disk, the program doesn't start, nothing happens not. I double-click the shortcut on my desktop (.exe file), and then click Yes to change Administrator box that app
-
Check the notification of space on my computer backup drive (Important)
My local disk C says that he is free to 78.8 GB only 9,00 GB. But the sum of the four individual record (by flogs (empty), program files (4.49 GB), users (26.7 GB) and Windows (18.4 GB)) is only 49.5 GB. My computer I check space (Important) shows wh