My wifi will display all the available connections, but all of a sudden that stopped

Similar Questions

• Vista will not recognize the projector connected for multiple display

  I'm under a system dual boot with Windows XP and Vista.  When running under XP, I doesn't hurt to connect a projector to my laptop and extend the desktop on the projector for meetings and others.

  When I am running Vista, it does not even recognize that the projector is connected.  However, once I have connected the projector, if I reboot the system, it will then display on the projector.  If I disconnect the projector, the screen does not reappear on the screen of the laptop, I have to restart, with the projector removed for office reappear on the screen of the laptop.  I'm hoping to get multiple monitors to work with Vista, as it does in my XP boot.

  For the purpose of the next presentation running in XP is not an option.

  Hi cptrigeek

  Try these steps and check if that helps:

  Method 1: We can try to perform a power cycle of the projector.

  Remove the cable from the power of the projector and this continues for 5-10 minutes. Also do the same for the laptop, Dungeon, it off. Then put back in place and start the projector. Now, start the laptop as well. Connect now. Now, you will need to install the driver for it (if there is one). After which, you need to configure the settings of the laptop.

  Method 2: Check the following steps:

  1. connect the projector to your Windows PC. NOTE: the following steps apply if you use your PC in MIRROR mode only.

  2. on the screen of the computer, right CLICK on the desktop and select Properties.

  3. click on the SETTINGS tab. If you want that your displays in mirror (what you see on laptop, it's what the public sees) you must make sure that the box "extend my desktop to this monitor" is DISABLED. If you see a box of "mirroring", remember to check it out.

  4. drag the slider to 1024 x 768 screen. As a general rule, the external monitor may limit this parameter. If your screen is higher, it might not display on the projector, then you want to test this until you're ready to take the floor. Drag the color to highest (32 bit) if available or medium (16 bit) quality if the first is not available.

  5. now select FN and press the function key. This key is usually given by a small screen icon, the CRT/LCDtext and is usually found on F8 or F5 even. Press the appropriate operation button ONCE and wait. After a few seconds, the second screen should light up. Be patient, it may take up to 5 seconds. On the projector, it may take up to 10 seconds for the projector to detect your system and switch. Note: a second press of this function (in general) will switch to monitor EXTERNAL only. A third press stop INTERNAL onlyand the circle for each push after that. Also note that some laptops can do this sequence in a different order, so learn your system so that you can quickly to the desired mode.

  6. click on the ADVANCED button. If 'apply the new settings to display without restarting' is not selected, select it. Under screen refresh rate, select 60 Hz. click APPLY and CONFIRM the choice. Click OK to close the ADVANCED options dialog. Close the display properties dialog box. You should now see a mirroring of your monitor on the second monitor.

  7. test: A test, disconnect the second monitor. put your mobile PC to sleep. He wakes up and let it fully come (login if necessary), and then reconnect the external monitor. On some machines, he needs to quickly display the screen in the last known state (you may need to wait up to 10 seconds). If it is not correctly displayed, press the switch function, ONCE. Yet once, note that it can take up to 10 seconds to view, so be patient. If only the projector display now, some pressure on the function switch key should provide for both screens again. If you can't get the projector to display, check all your connections and settings above.

  8 Note that when you use the projector, after pressing the function for changing the monitor button, it may take up to 10 seconds for the monitor find and block on your machine. Just wait. Pressing on the keys new fkey can simply ruin your settings or turn off the projector.

  9. not all laptops work the same way. Please make sure you learn how your work before you get to your presentation.

  (Not mirrored)

  1. If you do NOT want mirrored poster (display of different internal and external), CHECK the box next to the line that reads "extend my Windows desktop to this monitor." This SHOULD result in the external monitor display an image which is an EXTENSION of the current desktop.

  2. in the settings dialog box, the internal monitor appears as a '1' and externally as a '2 '. Click ONCE on the '2 '.

  3. with '2' selected, drag the Screen Resolution slider to the left or to the right until the resolution reads "1024 x 768". Also affect the quality of the highest (32-bit color) if available or average (16 bit) if the first is not available.

  4. click on the ADVANCED button. If 'apply the new display settings without restarting' is not selected, select it.

  5. Select the MONITOR tab. Under screen refresh rate, select 60 Hz. click APPLY and CONFIRM the choice. Click OK to close the ADVANCED dialog box. Your system is now set for an extended desktop. When it is connected to the screen, you may need to use the function switch key to turn once more on this option, but on systems that I tested, the extended desktop comes just when the monitor is connected. Yet once, I suggested some tests with this mode of knowing how your laptop will perform when connected to an external monitor before coming to speak.

  6. notes that, in this mode, items moved to the extended desktop can be "lost" it if the external monitor is disconnected because they live on the extended desktop is no longer available. Also note that if the extended desktop is turned on, this part of funds 'second' can continue to live, which means that the cursor and the object can be moved off the screen in this sector and not be visible on a single internal monitor. To resolve this problem, do a right-click on the desktop, select Properties, select settings, click on the '2' box and UNCHECK the extend option. Items left on the extended desktop should now align the right edge of the internal display.

  See also: http://windowshelp.microsoft.com/Windows/en-US/Help/16152337-a45c-4a1a-b302-cfd95399ce071033.mspx#EQB

  Understand multiple monitors: http://windows.microsoft.com/en-US/windows-vista/Understanding-multiple-monitors

  Set up multiple monitors: http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

  Multiple monitor issues: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-multiple-monitor-problems

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Bad resolution of Qosmio G30 - external display via the HDMI connection-

  Hello! This problem makes me crazy, please help if you can...

  I just bought a G30-102 and I am trying to use it with an external display via the HDMI connection. The problem I have is that the native resolution of 1920 x 1200 cut the edges of the screen and the quality looks terrible - its almost as if the entire screen is enlarged. I tried with a BenQ FP241wz initially (1080i is 1920 x 1200) and the Toshiba helpline could not find a solution either - even after painfully reinstall all the drivers, etc..

  Its been going on for so long, I thought I'd try it out with my HDTV instead, just to be sure it wasn't a monitor problem. So I tried with my Toshiba 32WLT66 - and come to find that it has exactly the same problem.

  All the display settings appear to be correct and the G30 is convinced that the result is correct, so I have now it is - don't you think not that this is a problem with my HDMI port?

  Please help, I'm a designer, and it is essential that I use the machine on a large screen. If it is a hardware of the G30 problem, I need to talk to Toshiba immediately replace or fixing.

  Hello

  I tested the Qosmio G30 (HD-DVD) with my LCD TV using a HDMI cable. Everything worked perfectly. As a first step, I put 1080i value in the settings of the BIOS and after following the instructions in the HDDVDGuide document under http://support.toshiba-tro.de/kb0/TSB6A01LH000LR01.htm

• Some movie files will start all of a sudden lag or stutter?

  No idea why some movie files will start all of a sudden lag or stutter?
  You start to read a file and everything is ok, but then 2 minutes it starts to play up.
  If you pause and press play again, he will be ok for a minute and then replay upward.

  I thought that it had fallen because of the USB cable or wireless, but it still happens when I copy the files on the hard drive. The files are ok so read on a PC.

  Hello

  Can you post more information to better understand?
  Of course you have desktop PC and you want to watch movies from... where? YouTube, saved on the HARD drive external HARD drive?

  Video files in HD or compressed video files?

• Recent items in Windows 7 64 bit will display recently played .flv files but not show .avi or .wmv

  Recent items in Windows 7 64 bit will display recently played .flv files but not show .avi or .wmv

  How can you do recent items don't forget these past .avi and .wmv files

  Hello

  You can change some values in the registry. To do this, copy / paste the following text in Notepad, save it as a MP3WAVRecent.reg file and double-click this file to add it to the registry database:

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\WMP11. AssocFile.MP3]
  "EditFlags" = hex: 00, 00, 01, 00

  [HKEY_CLASSES_ROOT\WMP11. AssocFile.WAV]
  "EditFlags" = hex: 00, 00, 01, 00

  Note that plus save recently used for the Jumplist instead of frequently used must be checked in the Options of WMP - player, as well as the music at the bottom of life private tab.
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• Why can't I find all the sites that I have visited in my temporary internet files? It will display all the sites I visited. Now it doesn't and I can't open the strange things contained therein. I didn't remove the navigation or the private browsing.

  Ok... I want to see where were the other people on my computer.

  That would be the navigation history. Firefox > history-> show all history

  Firefox does not use temporary Internet files for anything except the Windows Media files.

  Type of topic: cache in the URL bar and press ENTER.
  
  Disk cache device = the list Cache entries

• Windows 8 "Other users" is the available connection option only

  I've had this problem for a few days now and others have been able to solve, but they had access to an account. I don't.

  I have recently reinstalled Windows because of the constant freezes, and when first installed, Windows stopped responding. I chose the end of the task, and this huge problem that I've ever had in this measure was just pushed in my face.

  The only user on the login screen (which is where my computer took me once essentially restarted Windows) is this option 'User' turned out to be impossible to connect to. I have no access to any files, settings, orders, or whatever it is that I've seen several people to use to solve this problem.

  I tried to restart my computer to see if I would be directed to the installation, but it just showed me the screen connection again.

  Any help? Again, I don't have no access to an account, which means that I have no access to files, settings or controls.

  Hello

  In this case, reinstalling Windows would be incomplete or corrupted. Then I suggest you to reinstall the operating system once more and check if it helps.

  Please post back with the State of the question and we will be happy to help you further.

• Printer prints not according to preview before printing, it will display on the right side.

  Original title: Epson Stylus SX235W

  I have the above printer but it is not print preview before printing on the right side I tried it realign your impressions, but it has not worked help me please, I have Windows 7

  Hello Polly,

  1. this happens with all the documents you print?
  2. you try to print from Internet Explorer?

  Here are a few web links to solve this problem, try them and reply here with the State.

  How to use the print head alignment utility in Windows 2000, XP, Vista, Windows 7 or Windows 8?

  http://www.Epson.co.UK/GB/en/viewcon/corporatesite/products/mainunits/FAQ/11101/1097

  Print quality problems: blurred impressions

  http://www.Epson.co.UK/GB/en/viewcon/corporatesite/products/mainunits/FAQ/11101/1376

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

• Windows 7 detects the wireless connection but cannot connect (3Com® OfficeConnect® Wireless 54 Mbps 11g Access Point Prod. #3CRWE454G75)

  Dear Microsoft,

  I appreciate all help to fix the inability of my brand new HP G42 notebook with Windows 7 to connect to my home wireless network.

  While I am able to surf the net, cable connection, for the last 4 days and an estimated total more than 20 hours - man, I tried several suggested solution round online to solve this problem, but to no avail so far.

  Windows 7 detects my wireless (WEP security OPEN) but simply could not connect.

  Meanwhile, Dell Latitde 630 my husband w / Windows XP Pro and Mac Book of dauther work very well.

  Thanks in advance for your help.

  LM

   

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Initially, I have will increase temporarily the computer to a place close to the wireless router to compensate for the weak, and or blocked the signal that could be part of the problem in the new suite spot work.

  In the computer itself.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  To ensure that if there are Wireless Utility the utility a seller is not running with the native Windows wireless utility .

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security and try to connect with no. wireless security.

  When work turn the security on the wireless and take the computer back to its original location.

  Jack MVP-networking. EZLAN.NET

• Firefox does NOT start, the removal and resettlement will start as the last step, but once Firefox is closed, it does NOT restart.

  Both browsers (Firefox 21 & IE) installed on my Widows XP 64-bit office refuse to start or click the icon on the desktop, the start menu bar or the executable files themselves. What happens is that all the icons disappear from the screen for 15-30 seconds, then the icons appear on the screen, and the last information message displayed from the system tray at the beginning upward is repeated.

  Firefox deleting and reinstalling will start the browser as the last step, but when the new copy is closed, it will not start. Also just restart the download installation without removing Firefox will be 'Upgrade' and start in last step, but when the new copy is closed, it cannot be restarted. Restore running on the new copy has apparent effect on the ultimate inability to restart after closing.

  I've only tried the Internet Explorer browser after being unable to start Firefox (its only usually used by States to update procedure) and have not studied either reinstall or repair.

  Did you use programs that I listed? All anti-malware programs to detect different things.

• Stopped monitors display on a single connection, but work on another

  Original title: several display issues

  I have a desktop 7 / and a laptop with vist.  Two weeks ago stopped office display on the monitor but still displays on HDMI.  This laptop stopped morning show on external vga, but still display on laptop screen.  Restored to the previous when date work but that hasn't helped.  Suggestions?

  Desktop computer is ASUS with dvi for fear that the age of a year, laptop is Toshiba 2 years with vga both works very well except for several monitor problems.  Seems like an update or something went wrong.  Office dvi start sceen for just a second and then goes black - light indicates the monitor is on.  When I click on identify on computer monitors second monitor is not displayed.

  First of all, I was wrong on laptop, it was bad connedtion.  Second of all, I unplugged DVI ASUS provided with office and connected Acer VGA monitor and it all works.  Cable VGA connected to the VGA on ASUS and it did not work.  I'll probably buy an ASUS to replace this one, so the next time I need something to throw against the wall I get it.  Problem solved.  Thanks for trying to help.

• Windows 7 network drive displayed in the command window, but not in Explorer!

  Hi all

  I have several problems with mapping network drives between W7 x 64 business computers. All computers entirely patches, are part of the same network and home group (which is not part of a domain) and I'm looking in the file share on the shares created on the primary computer.

  Share 'Backup' (for example) on the primary computer has all necessary for the 'Me' user access rights, which exists on both computers and is active. When I try to map a drive to the action using the Explorer, I get the error "the folder you specified is currently mapped using a different user name and password... "even if nothing is currently connected to this computer and the command" net use * / d "returns no entries.

  Using an admin command window, I can not able to map any drive sharing using "net use x: \\mainPC\Backup/user: me mypassword" command. The disc is available in this order, but DO NOT SHOW IN EXPLORER window! (Sorry, I am really angry now). Dir command shows all the files, I can create folders and copy things under the command window, but the command 'Start x:' returns the error "x: refers to a location that is not available...". "(pull the hair!)

  Your help with this problem is greatly appreciated.

  Ray!

  What you observe is by design. Mapped network resources are visible only in the session that created them, but not in other sessions. What makes them universally visible would be a breach of security.

• When I launch Firefox, just my homepage allows the opening, all of a sudden, that, with a new tab opens - how do I get this to stop

  When I start Firefox, just my use of the homepage (my g-mail) to open. All of a sudden, my homepage and some free computer game page opens. How can I get this other page to open no more?

  Thank you!

  Do you have the same two tabs when you launch a new window (Ctrl + n) or only at startup?

  You can check your extensions in case something snuck in. You can view and clear the page modules. Either:

  • Command + shift + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then, when in doubt, turn off.

  Typically, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  Who closes down the extra page?

• I have reset my user password after reset and recovery mode, I clicked on save and now the user connects, but there is a problem wih Keychain it does not open safari or any internet connection

  After resetting my password user in recovery mode the connected but user Keychain has an error and or safari or chrome will connect to the inernet also trying to access my icloud it asks to check my apple ID and freezes when I try to update the keyring password, it also freezes and nth seems to be work ive tried in safe mode , but the same problem

  Hey Mariam Gamal.

  I see that you have reset your password for the user account on your Mac and are facing some issues related to your keychain. I think that this article will be able to help you remedy this situation:

  OS X: Keychain Access asks for Keychain "login" after the change of password - Apple support

  https://support.Apple.com/en-us/HT201609

  Thank you for using communities Support from Apple!

• in a café which has wifi, my laptop says I'm connected, but it is also "no internet access.

  Hello

  I have a Pavilion dv6-2162nr laptop with Windows 7. I was in a coffee shop, try to connect to the wifi. My ' currently connected to: "box/screen said I was connected to wifi coffee, but he also said"No Internet Access". I couldn't go on the internet. Is there some setting I need to set up properly on my laptop, so I get internet connection in a coffee wifi? I think the problem is with my settings are not set correctly.

   

  Thank you

   

  whitzle

  Hi Luis_F,

  I went back again to the coffee-it turns out that coffee reset their network after I told them I was not able to use their wifi, & freeing up access points to get, since it had been so filled with people who use coffee network, what happens from time to time - they need to reset every so often. Problem solved.

  Thanks for your help,

  whitzle