my window safety stop working
My stop Center security job well I guess that I had trojen attack but my McAfee antivirus says I am fully protected I don't know how
My stop Center security job well I guess that I had trojen attack but my McAfee antivirus says I am fully protected I don't know how
First of all, make sure that your machine is clean, despite what your McAfee.
Download and run the Malwarebytes...
http://www.malwarebytes.org/ ... choose the "free" version
Download free TOPzilla also.
http://www.STOPzilla.com/products/STOPzilla/home.do
After you are convinced that your machine is really clean, here's how to restart youe Scurity Center...
Start button > in the search box, typeServices > press the Enter key > scroll down to find the Security Center, click on it >...
topic status , it must be said... Has begun
under Startup Type, it must be said... Automatic (d...
If it does not say that, right click on Security Center > click Properties > in the new window
in Startup Type, click on the pointer, and then select Automatic (delayed start)
the service status, click start
Click OK when finished.
For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
Tags: Windows
Similar Questions
-
Original title: Windows Vista 32-bit Edition home
Family Windows Vista Edition using 32-bit - receive the following error message when you turn on the pc.
HOST PROCESSING FOR WINDOWS HAS STOPPED WORKING.
Nobody knows what's happening with pc or how that I should do to fix this problem. Any help or advice will be
appreciated.
Thank you
EJ
Hello
1. you remember to make changes to the computer before this problem?
Method 1:
If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2:
Put your computer in a clean boot state and then check if the problem persists
Follow step 1 in the link.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
Method 3:
The issue might be related to malicious software, I wish that you run a full scan using your security software or run a scan using the Microsoft Safety Scanner.
-
I just changed web pages (using Crimson editor) and instead to save the files on my hard drive I just left open and "hibernating" my machine overnight. After 3 days of having an FTP connection (opened by a mapped drive) setting on my computer hibernation, I accidentally hit Shut Down, and I lost all my work, ARGH! (Yes, I know, I should have better). In any case, now when I open my computer and click on the FTP of the mapped drives, I get the message that Windows Explorer has stopped working. And if I go to Internet explorer (7), enter ' ftp://mysite.com it brings me to a root FTP page where it says: to view this FTP site in Windows Explorer, click Page, and then click Open the FTP Site in Windows Explorer. " I do that and it brings up a window of the Explorer windows momentarily and then I get the message. Explorer Windows has stopped working. Any ideas? I hope I don't have to reinstall the operating system. I did a system restore to 4 days ago. It did not work.
Hi SewNSew,
To refine the question, I suggest you try the following steps:
Step 1: Set the clean boot computer and try to access the drive
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software
Important: n ' forget not the computer to start normal follow step 7 in the link
Step 2: The utility of Auditor (SFC) for the file system allows administrators to perform an analysis of all protected resources to make sure they are the correct version. Whether SFC should find all incorrect versions in one of these protected resources, SFC will be replaced by the correct versions.
You can still run a SFC scan on the windows vista computer. To run a scan suite SFC as follows:
(a) click Start and in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.
(b) at the command prompt type sfc/scannow , and then press ENTER.
If the problem persists,
Step 3: Disable control (UAC) user account and make sure to do this, follow these steps:
1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
2. click on Turn User Account Control on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
3. Select the use User Account Control (UAC) to help protect your computer, clear the check box to disable UAC, and then click OK.
Important: It is not recommended to disable UAC; We just try to limit the question. Please, enable UAC after the test is performed. See the link below:
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off
See the link below for more information
Error message when you log on to Windows Vista: "Windows Explorer has stopped working".
http://support.Microsoft.com/kb/937093
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
iCloud for windows has stopped working - no data showing. Everyone knows this? Found a fix?
I've recently upgraded to a Windows 10 laptop and have had problems with iCloud. I can't access the photos at all - old hard drive Windows 7 accesses as before, except all my original photos (not Photostream - in folders) seem to have been deleted but it is now downloading Photostream when I activated my new laptop, but only back until June 2015. However, other data seems OK - contacts, calendar, notes, etc.
-
Equium A210 - Windows Explorer stops working
I have a laptop Equium A210. Why does windows Explorer stop working and restart all the time?
> Why windows Explorer does not work and restart all the time
Who knows? :|Maybe you have messed your OS and now OS doesn't function properly.
Have you tried to restore the operating system from the recovery CD?If this isn't the case, then do it. The whole HARD drive will be formatted and the recovery CD to install the image of Toshiba which contains the OS, driver, utility and software tools extra.
This should help.
-
Explorer Windows has stopped working when you click FLVfile
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409
Explorer Windows has stopped working when you click FLVfile / video clip downloaded by REALPLAYER
Hello
What version of the windows operating system is installed in the computer?
I suggest you to see link and check. (That applies to windows vista and windows 7)?
Error: Windows Explorer has stopped working
http://support.Microsoft.com/kb/2694911
Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.
Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.
-
Windows Explorer stopped working/Windows restarts.
Windows Explorer stopped working/Windows restarts. I tried the recommended fix, that is 'Sfc/scannow' and "no problem of integrity" this seems to be a problem of user a lot and it's a pain in the neck. MS certainly needs a fix.
Hello
Please start a new thread in the answers – Windows Forums for your version of Windows.
Answers - Windows Forums
http://answers.Microsoft.com/en-us/WindowsWe can certainly help you solve the problem.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
the computer, ups and stops working...
on a number of occasions, I get a blue screen with a print so small, that I can't read. Receive message a problem caused windows to stop working, will advise if a solution is found. Display messages to receive driver igfx has stopped working.
You should look at the web site of the manufacturer of your video card or monitor to see if they have updated drivers.
-
My computer keep saying windows has stopped working
My computer keep saying windows has stopped working. What can I do to solve the problem?
Hello
1. for how long are you facing this problem?
2. did you of recent changes made to your computer?
3. what operating system you run on your computer?
I suggest that you perform a clean boot and check.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Explorer Windows stopped working
-
update of Windows sometimes stop working
update of Windows sometimes stop working
Yan,
Please post with the information requested here:what to post in the Windows Update forum
Start with this troubleshooting step and post returns with the requested info and arises from the troubleshooting.Reset the Windows Update components
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Host process for windows has stopped working
Today, I got an error with no activity on the computer. "host process for windows services stopped working. Immediately after this message when I clicked on the Panel of the window was empty. Also, my printer stopped working. I checked the day windows journal and noticed that the last 3 weeks of auto updates had failed for some reason any. I have tried almost everything on the site of MIcrosoft to fix this problem without success. I even tried to do manual downloads of Vista SP2 but this faills and.
Any advice?
Hello
Try to install an update of:
http://support.Microsoft.com/default.aspx/kb/940520then run Windows update.
I hope that helps!
-
Product
Windows
Problem
Video hardware error
Date
06/11/2009 19:16
Status
Not reported
Description
A problem with your video hardware caused Windows to stop working correctly.
Signature of the problem
Problem event name: LiveKernelEvent
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Files helping to describe the problem
WD-20091106 - 1913.dmp
SysData. XML
Version.txt
Additional information about the problem
BCCode: 117
BCP1: FFFFFA8009C16260
BCP2: FFFFFA60026F1220
BCP3: 0000000000000000
BCP4: 0000000000000000
OS version: 6_0_6001
Service Pack: 1_0
Product: 768_1
Hello
BCCode: 117 is generally a problem of display driver (video) If you need to update (check the system machine
and the sites of the manufacturer of the device. You will need to remove and reinstall your video card a PC and not
edge. Perhaps a replacement card is necessary.If necessary you can perform in SafeMode with network - repeatedly F8 tap that you start.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
each driver in the list, additional useful information is displayed: load address of the driver, description,.
version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
own the software and drivers and all other main drivers that you have.Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
(Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.
Always check in the Device Manager - tab drivers version you install actually shows up. This
because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
pilot - reboot - check that it is installed and repeat if necessary.Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlHope these helps.
Rob - bicycle - Mark Twain said it is good.
-
I can't open the files in windows and whenever I opened a folder, there will be a pop-up window indicating the windows has stopped working and it checks for a solution to the problem.
Hello
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Prosess host for Windows Services stopped working and was closed
A problem with the application to stop functioning properly.
Hello
See the solution here
-
Windows Defender stop working after the malicious software removal tool
I ran windows software and after this removal tool, my windows Defender stopped working says its turned off, but when I try to turn it on nothing happens
This problem can occur because another security application is used or the Windows Defender service has stopped, or components of Windows Defender are corrupt.
You install any new programs recently? Windows Defender is not designed to protect against the extent of malware. If programs like Microsoft Security Essentials and Windows Defender both run, your system may experience degradation in performance and other problems caused by the conflict of two services providing real-time protection at the same time. I recommend that you keep the Defender off if another application of security protection is running.
If no similar security application is installed, I suggest that we have follow these steps to resolve the problem:
Step 1: Check the Windows Defender service
=================================
1. click on start, in the search box, type: "services.msc" (without the quotes) and press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
2. double-click on the service "Windows Defender".
3. click on the 'general' tab. Make sure the "Startup Type" is "automatic". Then please click on "Start" under "Status of Service" to start the service.If the problem is not resolved, please refer to step 2:
Step 2: Save the associated DLL files
========================
1. click on start, type "cmd" (without the quotes) in the box start the search. Right click on CMD listed above and click 'run as administrator '.2. in the command prompt, type the following and press ENTER to each order:
regsvr32 atl.dll
regsvr32 c:\windows\system32\wuapi.dll
regsvr32 softpub.dll
regsvr32 mssip32.dll3. close the command prompt, and then run Windows Defender.
If the problem persists, please after return.
Maybe you are looking for
-
Problems: upgrade cars - msi Geforce GTX 970 graphics
I recently bought a Geforce GTX 970 of msi graphics card. The problem is that my pc will not go through the HP-splash screen that opens before the windows splash screen. My electricity supplier has enough power enough. Help me please! HP motherboards
-
Linksys service Smart Wi - Fi is not available at this time
Is the connection of service cloud OK? I see this maintenance message almost everytime I try to use it: With the help of EA4500 N900, firmware v2.1.39.145204 The local connection works fine. And the link to this following error message: takes me to h
-
Upgrade from Vista Home Basic to home premium
I currently had to reinstall my version of Vista. Currently, I installed the Home Basic version but have an upgrade only home premium version. How can I switch to Home Premium without the disc to upgrade the only version upgrade, that I bought before
-
2 nights ago, my computer started having artifacts when trying to complete an operation, or when the startup graphics intensive (all 3 times or more). I tried the memory tests, computer health and the tests of graphics card, all going to 'good '. W
-
Number of spare part of CTI-TMS-APL-K9
Guy from hell, I'm doing a dynamic configuration on the TMS (CTI-TMS-APL-K9) and it seems to have end of life. Anyone know the repacement part number? Please help so I can rate. Kind regards.