My Windows 7 Pro system has some serious hardware, internet connection and security issues. The system image and restore the system in case of failure.
My Windows 7 Pro system has some serious hardware, internet connection and security issues.
My efforts to remedy by restoring a system image backup failed. At this point, I'm ready for a new clean install if I have to buy a drive to do. My question is whether a professional Ultimate upgrade will or will not fix these bugs. In addition, what is the cause of restoring the system to fail? I never turned off or cannot create regular restore points.
Original title: upgrade a "Fix" for existing system problems?
My Windows 7 Pro system has some serious hardware, internet connection and security issues.
My efforts to remedy by restoring a system image backup failed. At this point, I'm ready for a new clean install if I have to buy a drive to do. My question is if an upgrade to Professional Ultimate will be or not correct not these bugs. Also, what is the cause System Restore to fail? I never turned off or cannot create regular restore points.
Hello
1 re-installing/repairing software will not fix hardware issues.
2. the operating system upgrade is not the way to solve computer problems that can be carried forward.
3 1. If you use Norton, you should disable Norton inviolable Protection before using System Restore.
http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
AVG will cause problems with SR too.
«Temporarily disable AVG»
http://www.Avg.com/ww-en/FAQ.Num-3857
2. try to use Safe Mode system restore.
http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
"Start your computer in safe mode.
3 Malware will stop at the system restore.
Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:
http://www.Malwarebytes.org/products/malwarebytes_free
____________________________________
We really need for more details:
"My Windows 7 Pro system has some serious hardware, internet connection and security issues.
See you soon.
Tags: Windows
Similar Questions
-
my webcam application does not work on my windows 7. It has suddenly stopped working. I tried to install the drivers of webcam from the websites of toshiba. but after downloading the drivers, when I run the winrar files, he said inexecutionable. Please help.also when I run the compatibility of the test program, it says the webcam application or incompatible, even if it worked very well earlier.
See the help/support site Tosh or their forums.
Have you recently updated of your drivers from somwhere system other than Tosh site or installed any new programs or perform any maintenance operation.
Program compatibility test cannot be invoked
-
Internet TV in Windows Media Center
In Windows Media Center, it has an option for Internet TV. When I try to use it, it has a popup that says that this feature is not available in the Canada. I am in Pa, USA. I checked the language settings and location, and they are set for English and the USA. I am running Windows Vista. Any help would be greatly appreciated.Barb thanks for all your help. I do not have it work, but I've upgraded to windows 7 and now it works.
~ James -
I have Windows 7 Pro English pre-loaded factory! is it possible to change the language of the Interface in Arabic?
Win 7 Pro Support switches language? or only win 7 Unltimate and Enterp?
Original title: dass
Business or ultimate edition
http://Windows.Microsoft.com/en-GB/Windows/language-packs#lptabs=Win7
-
I have problems connecting with adobe catalyst in program adobe muse. A pop-up window appears saying that "access to adobe ID has expired. Check your connection and try again later. I checked my internet and everything works fine. Can someone help me with this?
Hello
Please try the steps in the following thread
-
sharing is only working for some websites of Internet connection
Wi - Fi my laptop is steady as a rock, but the wireless adapter I have for my office to cancel very often, so I decided to connect both via an ethernet cable and use internet connection sharing so that the Office can enjoy wireless laptop. Both computers have Windows 7 Home Premium installed.
The Installer seems to work, but only for some Web sites - for example, it has no problem to connect to google and microsoft.com using ICS, but he absolutely refuses to connect to facebook but also many other Web sites. My laptop has no problem connecting to websites that my office cannot connect, so I'm puzzled as to why it seems to be able to relay connecting to some Web sites, but not others. Can someone help me understand what is happening here, so that I can access more than just pieces of the internet on my desktop?
I'm sorry, but you can understand how annoying it can be when someone does not even time to read your question and posts nothing but completely irrelevant, canned solutions (who would would realize that they were not relevant if they had taken the time to read it instead of just copy - paste * based on the title of the post). It's worse than no help at all, because then people who might bring if not actually useful assistance will see oh, "this question has already been answered" and move to one that was not. In any case, I'll try to ask in this forum. Thanks for the suggestion.
-
I just downloaded the upgrade of Windows 8 with the 14:99 option $ discount and after following the steps, he comes to the download section and said "we can connect you right now, please check your internet connection and try again" I tried several times and my internet connection is fine, why am I seeing this?
Thank you
PS I am in Australia and Runninng Windows 7 Home Premium 32 bit
Hey Binka,.
Your specific error message (failure of the API online store [error: 0x803d0013.]) requires agents that specialize in ESD.The ESD team contacts are listed here.
There was also another resolution for this source of error in this thread.
Windows 8 pro update - we cannot connect
He said simply that the original poster had a PC to update and maintain their system and verify that the date is correct are their resolution.
For all other users who came across this thread, take into account advice from cyberjayar in his post on 31 October. Make sure that your Antivirus programs and firewall is completely turned off during installation. Thanks for posting, happy assignments!
-Robert
-
Time Capsule has lost the Internet connection and DNS servers
I use a Time Capsule for Time Machine via Ethernet backups for a couple of years, use it in mode bridge taking its Internet connection directly from my router and connected in turn by Ethernet to my iMac. (Most of the time that I also had wifi off on my iMac and took my Internet directly via the TC Ethernet connection.) A few months ago I upgraded to El Capitan, and the TC has lost its connection Internet (flashing yellow). A few days later I drove back to the Yosemite (for other reasons - Mail had gone mad) to restore a backup of the TC and everything was fine again for a few months. It may or may not be meaningful I plugged TC yesterday to new laptop for my wife to support for the first time, and this laptop is running El Capitan. Since then, the TC has once more lost its Internet connection and DNS settings and is stuck on flashing orange. By clicking on the 'Internet connection' status alert, tells me that the TC is not a valid IP address.
I have reset the TC, repeatedly and reconfigured but all without success. After consulting the other discussions, I also tried giving the unit an alphanumeric name with no spaces & special characters and change the IPv6 "Link-local" configuration only, but this did not affect the result. And I updated the firmware for good measure. Then I unplugged overnight and carried out a full power cycle the steps recommended here, restart the router, TC and the computer (and performed a factory reset on the TC, while the router & computer was turned off). After doing that, the TC has become undetectable by AirPort Utility, until I have reset reconfigured once again, he and ended up in the same place.
It may or may not be important to mention the following:
1 when you set the TC after a reset, I repeatedly selected the option of adding to an existing network instead of create a network, but the installation wizard who ignored each time.
2. in the installation each time, this point, I shows me the following, which seems to suggest that there is a problem but don't say so explicitly:
I would be grateful for any advice.
Weird how everything's going well for a few years and then crazy when you have something will change.
El Capo adds some network problems more... but something could be fundamentally wrong with the installer.
Your current configuration, it is apparently bridged but cannot get an IP address. The address 169.254 is give it since it's self generated.
You need to do a manual installation. It simply means the Assistant is unable for any reason to be your network so start over and do it manually of misfortune (wow, or also possible misery, woah being where you are now!) to go...!
1. I need to know what modem you are connected. Make and model please?
2. the most important. What is the main router on your network or a modem?
I gave the edge to make manual settings a few times. Somehow my instructions for Yosemite/El Capo got lost... I'll try and hunt down them. In the meantime, the basic method remains the same.
https://discussions.Apple.com/thread/6509420
It is not so difficult... You just know where you're going before you start.
Airtport Utility cannot find airport Time Capsule on one of my Macs 2009
-
I use internet 8. Windows Update repeatedly continues to ask me to install the service pack that when I do I lose my internet connection and there to remedy, I come to restore the system to a previous date to get my internet connection
Hi James,
1 Windows operating system you are using?
2 are you facing this problem after installing service pack (SP) or at the time of installation of SP?
If you are faced with the question after the installation of the service pack, you can visit the computer manufacturer and try to update the drivers of network card on the latest version and check.
Updated a hardware driver that is not working properly
You also try to launch the troubleshooter from the following link and check.
-
Windows could not start. A recent hardware or software change might be the cause. To solve the problem:
1. Insert your Windows installation disc and restart your computer.
2. choose your language settings and thenk click 'next '.
3. click on "repair your computer".If you do not have the disk, contact your system administrator or computer manufacturer for assistance.
File: \Windows\system32\winload.exe
State 0 xC0000001
Info: The selected entry could not be loaded because the application is missing or damaged.But, instead of file: \Windows\system32\winload.exe I get file: \$Windows.~BT\windows\system32\winload.exe.
Hi imranhussain1979,
· You have made any changes recently?
· When it was working fine?
· You have Windows XP or a later version of Windows?
Step 1: The error seems to refer to a later version of Windows. Restart the computer and check if the installed operating system.
Step 2: Try to start the computer in safe mode and check the number.
Start your computer in safe mode
Microsoft Windows XP: start the computer in safe mode
Respond with more information so we can help you best.
-
Windows could not start. A recent hardware or software change might be the cause.
I have a Toshiba M300 and it fails to start. Here's what he said.
Windows could not start. A recent hardware or software change might be the cause.
If the files in the window were damaged or configured incorectly, startup rapir can help diagnose and fix the problem. If the power was interrupted during startup, choose start windows normally.
Lanch Startup Repair
Start window normally
Well, I had two options... and nothing works. It gets stuck just on loading thingy, where it says MICROSOFT WINDOWS and keeps loading... I leave for 2 days and he continued make it... and it also won't let me restore my computer...!
PLEASE HELP :(
Hi Suzanna2001,
Were present from recent changes to the system before the show, such as adding new hardware or software (including Windows Update). You have access to a Windows CD/DVD? Run the startup from the CD/DVD repair. There is also an option to perform a restore of the system on the CD/DVD. If no option is the problem, follow the steps below:
1 1 demarrer start from the Windows 7 DVD, select your language and keyboard options, select repair your computer, and then select command line.
2. from the command prompt, run the following command:
DISM image:c:------/ Get-PackagesThis will produce a list of updates installed and packets. They will look like this:
The package identity: Package_for_KB978262 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.1.1.0
Status: installed
Output type: security update
Install time: 02-11-2010 13:013. find the most recent and then make a note of the identity of the package.
4 run:
DISM image:c:------/ Remove-Package /PackageName:Package_for_KB978262~31bf3856ad364e35~x86~~6.1.1.0 (name of the update from the previous step)
Until it is complete, you will get a status of the collection.
5. restart your PC.
You want to start with the most recent, and then remove them one at a time to find the problem update Dena
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Whenever I try to boot my system I get the error message
Windows could not start. A recent hardware or software change might be the cause.
File:\Windows\System32\Drivers\shcsh.sys
Situation: 0xc0000225If I try to boot from the DVD of ROM(with Windows Visata) to reinstall the operating system to Windows Vista, it does not.
Please I need your help
Have you changed the boot order:
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
See you soon.
Mick Murphy - Microsoft partner
-
How to make the Windows 7 network icon to show availability of internet connection?
Flashing
Hi RaDiCal007,
Microsoft has removed the option host connection icon network; apparently drain you resources. Like you, I prefer much the icon 'flashing '.
This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.
John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com
-
original title: error 5 access denied firewall
Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »
Hi vipin sharmavg,.
1. did you of recent changes on the computer?
2. do you have security software installed on the computer?
See the below Microsoft article and try the steps mentioned, check if it helps.
You cannot start the Windows Firewall service in Windows XP SP2
-
How to make the Windows 7 network icon to show availability of internet connection?
Hello!
Windows 7 network icon shows no availability of internet connection. Windows Vista network icon showed availability of internet connection with a globe. How to make the Windows 7 network icon to show availability of internet connection?
ConcerningHello kopn,.
Thank you for visiting the Microsoft answers community.
The icon for your internet connection, but the animation and the color associated with the network icon in Vista and earlier versions is no design in Windows 7.
Chris.H
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Vista Home premium error 800F081F
I can't run windows update. It will immediately fail with error 800f081f.I downloaded SP2 and installed successfully. But I can't get the updates via windows update. Now I tried to install KB947821 "System Update Readiness Tool", I downloaded the pa
-
Cannot access the web page of the wrt54gx router
I configured my wrt54gx as point of access by disabling the DHCP and assigning static IP address 192.168.0.6. My main router is a wrt310n. My access point works very well when it is connected with a wire to the wrt310n. I want to reonfigure the wrt54
-
Whenever I try to browse my site blastoffnetwork I get a script error message, I click Yes when asked 'do you want to continue running the script', but the message appears more than once before that my page will load Internal Script error Explorer -
-
BlackBerry Smartphones cancellation of corporate email put in place
If anyone can help - I have a 9320 curve - I went in all of the e-mail messages and must have gone to the enterprise instead of general email activation. Now I can't get to the original set up screen as the application for a business account activati
-
Good afternoon! I have problems to install the program Creative Cloud - 43 error
The program generated an error when reinstalling the system 10.10.5.