my windows 8.1 pro will not install anything

Similar Questions

• iPad Pro will not install the last update of iOS, says that it is not connected to the Internet. It is connected!

  MY iPad pro(9x7) will not install the last update of iOS. I get the message it is not connected to the Internet, but it is connected! I have f

  I istalled the update on my iPhone 6 without Ant problem. I tried switching off and on again, but the result is the same, it will not be installed.

  I just read a post that Apple released the 9.3.2 update for iPad 9.7 Pro. Cannot confirm this, but not me. See post by Phil.

  iPadPro9.7 said that current operating system 9.3.1 will not update 9.3.2

• Windows Vista Ultimate SP2 will not install update KB2378111 or install downloaded programs and returned with error code 80070570

  Hello... my computer will not install update KB2378111 with a code error 80070570.  In addition, I can not install all programs downloaded from the internet, specifically my anti-virus software.  I'm running without any software antivirus at this time.  I ran the most recent Microsoft malicious software removal tool and it showed that there is no problem.

  I'm running without any antivirus at this time software

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: see the "to install Windows by performing a clean install" (or "reinstall Windows Vista") http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista article

  NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer: http://support.microsoft.com/kb/971029

  VERY IMPORTANT! -Online any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
  http://www.us-cert.gov/CAs/tips/ST05-007.html

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows service pack 2 will not install on my computer

  I have windows vista and service pack 2 will not install on my computer what should I do

  Start here:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366 TaurArian [MVP] 2005-2010 - Update Services

• Windows Vista updates which will not install

  My OS Vista Home Premium 32 - bit for my HP Pavilion a6460t computer will not install the updates listed below.  I scanned for virus conficker, as well as for other viruses, most recently with the Microsoft OneCare security scan (beta), and my computer is not infected according to these analyses.  I have also tried installing these updates directly from the websites of download from Microsoft without success ("the following updates were not installed").  Auto update is on.

  Update security for Windows Vista (KB960225)
  Update security for Windows Vista (KB958690)
  Update for Windows Vista (KB959772)
  Update definition for Windows Defender - KB915597 (definition 1.55.1119.0)
  Update for Windows Mail Junk e-mail filter [March 2009] (KB905866)

  Thank you

  Ron Alexander

  After several calls to the technical support of HP (which is also the warranty service for my Vista installed factory), the problem of update is finally resolved by reinstalling the operating system Vista.  Thanks again for all your help and suggestions.

  Ron Alexander

• My installer of windows is damaged and will not install office 2007, I tried the fixes, but still get error 2

  My installer of windows 7 is corrupted and will not install office 2007, I tried the suggested fixes but still error 2 in windows install when I hit start

  How can I get this problem... Thank you

  Well, I don't know what patches you have tried.

  Troubleshoot Windows install

  2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Substitute:

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  1. in the menu 'Start', click on ' execute:.»

  2. in the "Open" box, type "msiexec /unreg", and then press ENTER.

  3. in the menu 'Start', click 'run '.

  4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

  or

  Click Start Orb, in the box, type search: Regedit.

  Highlight: HKEY_lOCAL_MACHINE/SYSTEM/CurrentControlSet/services/msiserver

  Verify that the SYSTEM account has full control. If it does not, add the SYSTEM account with full control.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Also:

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

• Update for Windows XP (KB2509553) security will not install starts but will not end

  Update for Windows XP (KB2509553) security is not installed

  Hi RogerGreene,

  1. Did you the latest changes on the computer?
  2. You are able to install some other updates on the computer?
  3. You have security software installed on the computer?
  4. You receive an error message when you try to install the update?

  Method 1

  I suggest that you manually download and install the update, check if it installs properly.

  Update security for Windows XP (KB2509553)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=16350

  Method 2

  If the previous step fails then I would suggest that reset you the Windows Update components by default and then try to install the update.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• Equium L300 - will not install anything other than Microsoft downloads

  Equium L300 put up-to-date with Windows 7. I'm a novice PCs which concerns so any help welcome. My laptop will not install 'programmes' (for example Java AVG etc etc) to the bottom of charges, ask to run and then nothing happens. It is used to!

  I tried just about everything I can think but now can't see the forest for the trees. I stand to lose 50 pounds after he tried to update my sat nav!

  Hmmm... It's strange. Right click on setup.exe and run as administrator. In addition, disable the firewall/antivirus.

• Acrobat 9 pro will not install on windows 8.1

  Got an error "1935". Called Administrator / Active: Yes command. did not work.

  Happy new year

  Acrobat 9 is not designed to be compatible with Windows 8, and which does not change. You must upgrade to Acrobat XI.

• Windows Vista fix KB947821 will not install.

  So I meet me the error 800b0100 and he said to download via the website, but whenever I open the download to install, it is just that

  Initializing installation... done!
  Installing the hotfix for Windows (KB947821) (update 1 of 1)...

  and the installation bar move at all.  However the checksur.exe checksurlauncher.exe and CheckSURPackage.exe are all performed, but nothing ever happens, what's the problem here?

  I don't currently have an anti-virus or anti-spyware installed...

  Not good. Get an app installed AV & update should be your first order of the day immediately after the connection of the computer to the internet after doing the clean install. Yes, before check you in Windows Update AND before you install the OBJECTIVE and/or Mozilla.

  1. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT difficulty modes and AGGRESSIVE; reboot & test [1]

  2. If still no joy, chances are that you see the effects of a hijackware infection. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer: http://support.microsoft.com/kb/971029

  VERY IMPORTANT! -Online any Norton or McAfee free trial which is preinstalled on an OEM computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
  http://www.us-cert.gov/CAs/tips/ST05-007.html

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  Wish I had better news for you. Better luck the next time around!

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• HP laserjet 1022 windows 7 (64-bit) will not install printer what can I do?

  1 HP LaserJet 1022 printer

  2. Windows 7 64 bit

  3. No Error Message

  4. the only changes to the system are updated security Windows Updater. This is a new computer and old was under XP.

  I tried to delete the printer, newer software (lj1020-HB-pnp-WIN64-en) download and try to install it, add the printer through windows and even the printer will not work. The cd version will work until you are asked to connect the printer and then nothing happens. I even tried to run overnight to see if it find and install, but nothing happened. This printer is a workhorse for me and I want to keep running, any suggestions on getting this printer is recognized and run again?

  See if the 1022 is listed under other devices in Device Manager.
  Under 'Other devices' right-click on HP 1022
  Select "update driver software... »
  Choose "Browse my computer for driver software".
  Choose "Let Me pick from a list of drivers for devices on my computer.
  Select 'Printers' > next
  Under the "factory" > HP
  Under "Printers" > HP Laserjet 1020
  Select "Yes" to the warning popup

• Intuos 5 pro will not install or run properly

  I tried to install a tablet of pro5 intuos on my windows machine 7.  The installation seems to goes off without a hitch, invite him alone is to restart the computer to complete the installation.  After the reboot, the Tablet recognizes the pen / touch, etc.  But on the side of the tablet buttons do not work.  The driver utility that their control is not installed.

  I contacted the support of Wacom, and together we have reinstalled the software.  We also tried to stop and start the service that controls the wacom tablet, as it is a known issue with them.  Always without success.

  I repeated the process with the windows security disabled as well. The results are the same.

  Wacom suggests that Windows blocks the installation of the driver, or service.

  Someone at - it ideas?  Similar experiences?

  Grant

  Hi Grantvan,

   
  Thanks for the reply with the status of the issue and the required information.
   
  Based on your response, I understand now that the drivers for the wheels of scrolling of the Tablet is not installed on your Windows computer and the result buttons and scroll wheels don't work, correct me if I'm wrong.
   
  Method 1: Try to place the computer in a clean boot state and try to install the drivers and also check if the wheel buttons and scroll work in the clean boot state.
   
  A clean boot is executed to start Windows by using a minimal set of drivers and startup programs. This will eliminate the conflicts of software that occur when you install a program or an update or when you run a program in 8.1 of Windows, Windows 8, Windows 7, or Windows Vista. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.
   
  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135
  Note: After troubleshooting, refer to the section «How to reset the computer to start normally after a boot minimum troubleshooting»
   
  Method 2: If you question persists in the clean boot state, try to install the drivers in compatibility mode.
   
  Most of the programs created for earlier versions of Windows work in this version of Windows, but some older programs might run poorly or not at all. You can run the resolution of the problems of compatibility of program on most of the programs to detect and correct common compatibility problems.
   
  Make the programs more compatible with this version of Windows
  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows
   
  Hope that this information helps answer please with the State of the question to get help, we will be happy to help you.

• Windows 8 Media Center will not install, get useless message error "something went wrong".

  I have the version upgrade of Windows 8 Pro and can not install Media Center.

  I signed up for a key that was sent to me and past the initial check whenever I try to install it.

  I check the checkbox for the conditions once the key is successfully verified.

  I then get the bar of green progression for the verification of updates and after about 30 seconds, I get the error message 'something went wrong '.

  Hello

  This is how I solved this problem.
  I have notised that a file with the name ehome. has been "created" in the windows folder.
  This seems to block the creation of the eHome folder, where the Media Center should install.
  Remove the ehome. file, create the eHome directory and try again to install the Media Center.
  Worked for me on two different PCs.
  See you soon
  M

• Windows Update problem. Will not install the Silverlight security updates

  I'm running the 32-bit version of windows xp service Pack 3. Windows Update: KBs 2514842 and KBs251827 download, but not install I am also running enternet explorer 8. When silverlight trys to install I get a message that it is on a resourse which is not available. I installed Silverlight a few years ago and have not used them. When I try to uninstall also says he's on a resourse which is not available. I opened the Control Panel on my computer and it says that it is there, but I can't seem to load. also have problems with Quicktime with the same problems. Everything else seems ok. I have the free version of AVG antiviris and protection to the current Ad on my computer.

  Hello

  I see you're questions fcaing install KB 2514842 and Ko 251827 "and Quicktime updates.

  What is the full error message?

  Let's try the following and check:

  Step 1:

  You can try the steps from the following link and then check if install updates:

  How to clean a facility damaged Silverlight and then reinstall Silverlight

  http://support.Microsoft.com/kb/2608523

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the in the Windows registry: http://support.microsoft.com/kb/322756

  Step 2:

  Due to QuickTime, you can check this link:

  http://support.Apple.com/kb/HT1925

  I hope that helps!

  If the problem persists, or you need help on Windows let us know.

• Adobe Application Manager will not install anything!

  I tried to update Photoshop CS5 12.0.4 and Adobe Application Manager (AAM) keeps asking me my system admin password.  Whenever I go there, the window opens again.  I could enter my password, a dozen times, it will not start the updates or installations.

  I tried:

  • stopping and restarting
  • changing my admin password
  • install a non Adobe software (to see if it was a problem of OS X)
  • uninstalling all my software Adobe (same problem trying to install)

  I would really like to be able to update my software.  Someone knows what to do?

  -Sean

  iMac 2.8 GHz Intel Core 2 Duo

  OS X 10.7.3

  You can try to connect as root?  Activation and use of the user 'root' in Mac OS X - http://support.apple.com/kb/HT1528