My Windows Vista computer does not see the network or printers that are connected to a computer using Windows XP
before that norton was installed, it worked, but since Norton was installed AND DELETED, Vista will not see XP or its printers.
I have checked the firewall and they took two computers, but still no luck.
Hello
Did you change your computer?
This problem occurs if the (LLTD) link layer topology discovery Responder component is not installed on the Windows XP computer.
Network card in Windows Vista makes network diagrams of connections between network devices that can be used to troubleshoot connectivity issues. Network map uses a discovery protocol called Link-Layer Topology LLTD (Discovery) that queries other devices on the network to determine how the network is organized.
Windows Vista includes the software components that implement the LLTD protocol. For other devices on the network to display on the map, they must activate a discovery protocol that can meet the demands of mapping from the Windows Vista-based computer.
I suggest you to install the update on windows XP.
http://www.Microsoft.com/download/en/details.aspx?amp;amp;amp;displaylang=en&ID=5577
This reference so
http://TechNet.Microsoft.com/en-us/library/bb727037.aspx
Tags: Windows
Similar Questions
-
Vista system does not see the files that are on a CD of HP, Intuit and others
CD allows you to install different products does not work on my Vista Ultimate system when the CD has been made by the manufacturer to support Windows and Mac OS. These CD work in an XP system and a Windows 7 system. I have two optical drives on the Vista system (two allow DVD writing) and installation CD fail the same way in the two discs.
If I share a CD drive on the Windows 7 or XP System I and then place the CD in the drive, I can see all the files on the Vista system. Another CD that do not also for Mac OS work well in all my systems. So far, a single CD of Intuit and two HP is failing.
I made several complete scans of my system searching for virus using two tools each of Norton and Microsoft and can't find anything.
When I said above fail, I wanted to say that Windows Explorer displays an incomplete list of files on the CD. To be more precise, the list displayed on the Windows vista system does not include autorun.inf or setup.exe. There are also listed things that should not be registered on a Windows install CD. VolumeIcon.icns and background for example. Basically, it seemed something to tell readers that they are on a Mac system.
Earlier today, I solved this problem. It seems that someone (probably me or my son) XPlay 3 was installed on the system. For some reason, this included a copy of MacDrive. I think that MacDrive caused the problem by making the part Apple Mac of the CD to be the only part that was visible to my system. I uninstalled XPlay 3 and everything works fine now.
-
After moving my desktop of my computer does not see the network
cable tested good, replaced by the new network card it works, actually clicked on the computers in the workgroup to see last week and it worked now missing again... can get online another fine two computers agree, but can not see me
Hello
If your router not booking IP use.
Otherwise, configure the computers with static IP addresses.
http://www.howtogeek.com/HOWTO/19249/how-to-assign-a-static-IP-address-in-XP-Vista-or-Windows-7/
Then go to sharing and permissions.
Maybe this can help.
Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions
General example, http://www.ezlan.net/faq.html#trusted
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .
Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspxSetting Windows native firewall for sharing XP -http://support.microsoft.com/kb/875357
In Win XP pro you can visually see the setting of authorization/security and configure them according to your preferences.
http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab
When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.
-
Portege A600-138 with Vista 32 bit does not see the computers in the Group Win XP network
Hello
My Toshiba Portege A600-138 with Vista Business 32 does not see the computers in the workgroup.
In our office, the computers are all equipped with Windows XP.When I connect my laptop to the Local network, I don't see any neighboring computers in Network Explorer.
I spent 1 hour and 40 minutes to talk to a specialist Service of Support from Microsoft, and the only way to have access to local machines, we found it had to enter the IP of the computer directly into the computer browser path field.I hope you understand what I mean.
The man said that he had no this problem with non - OEM Windows Vista versions.
He meant that the problem was with the oem versions of Vista preinstalled on laptops only.
He said that probably the sellers - in my particular case Toshiba - supplied their notebooks with VIsta oem images that were somehow corrupt.Does anyone have an idea of the cause of this problem?
> The man said that he had no this problem with non - OEM Windows Vista versions.
> It meant that the problem was with the oem versions of Vista preinstalled on laptops only.That's nonsense for me
The Vista OS preinstalled Toshiba which is same BONE as full Vista disc from Microsoft.
There is only one difference; Toshiba laptops are preinstalled with Toshiba and pilots tools and drivers and tools are part of the Toshiba recovery image that contains Vista, driver and toolsCheck this box:
http://www.Computerworld.com/s/article/9019179/Teach_XP_and_Vista_to_play_nice_on_networks?taxono myId = 16 & pageNumber = 1You will find information that a problem has to do with the new Windows Vista network map.
Windows Vista uses a new Protocol (Link Layer Topology Discovery).
LLTD is integrated with Windows Vista, this is why they appear correctly in the network map.
But the problem is that LLTD is not integrated with Windows XP, which is why they do not appear correctly.But you can fix the problem by downloading and installing the layer topology discovery responder.
Install it and your PC Windows XP will appear on the network map. -
all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?
If I shut down the computer and plug... he sees the thing then turned back...I can not just plug in while the computer is turned on... once again he has used to do this just as well... for some reason any, he sees things now.any thoughts?Hi KK Waddell.
Thanks for posting in the Microsoft Community.
I understand that you face the issue with the USB port does not work when you embedded on the front of the computer.
Before you start the troubleshooting steps, I need the information required.
1 did you changes to the computer?
2 did you receive an error message?
I suggest you to check with the other USB port.
I suggest you to see the links and check.
USB port may stop working after you remove or insert a USB device
http://support.Microsoft.com/kb/817900
Advanced troubleshooting tips for General USB for Windows XP problems
http://support.Microsoft.com/kb/310575
One or more USB devices may not work when you start your Windows XP-based computer
http://support.Microsoft.com/?kbid=885624
See also:
Hardware devices do not work or are not detected in Windows
-
Original title: Signature Collision?
I'm having hard to the installation of a second external drive. I use Windows 7 Ultimate RC. There was a WD 1 TB drive My Book already installed - healthy and works very well. The problem occurred after installing a second WD 1 TB my book reader. I followed all the instructions, pluuging the drive to a USB hub. Windows found the disk, installed drivers and reported the new drive ready for use.
Windows Explorer does not see the new drive. Devices and printers shows 2 external drives from WD. Disk Management shows as 2 drives, but the second disk is offline because of a 'Signature' Collision
Each player works very well if it's the only drive plugged in. "Eject My Book" does not work because a program (or more) are to use the player in the background (Windows or Norton).
I installed the latest firmware and I'm still having this problem. I've been emailing WD with this problem and they are running out of ideas.
Can anyone help?
Thank you
Comatose13Hello Comatose13,
There is an old article of KB in Windows XP that has been recently updated with additional measures to solve this kind of problem. The KB covers Windows XP, Windows Vista and Windows 7 with step by step methods. See if that helps.
http://support.Microsoft.com/kb/330140
Bobby
-
Windows 8 does not see the hard drive on the Satellite A200
Windows 8 does not see the hard drive on the A200.
How to install it?S strange Windows 8 should already contain the HARD drive controller driver to recognize the HARD drive during installation.
The HARD drive is visible in the BIOS?Do you use the original disc from Microsoft of Windows 8?
-
I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you
Can she be seen by disk utility (and which version of Mac OS X is)
-
Device drivers for a Win 7 install on Ubuntu system
Hello
I bought a Toshiba Portege M400-S5032 tablet PC reburbished that came with Ubuntu installed. I am trying to install Windows 7, but he does not see the disk partitions and the installation goes to the screen 'Select the driver to install' with no option. Because it is not find Windows device drivers, I went to the Toshiba site to see if I could download a full game, but I can not... So, how do you get drivers for Windows can install (or y at - it another way to work around it)?
Thank you!
The bios on fail safe defaults options are?
It will probably take the raid driver
-
I bought a new pc to replace my old hp 14 months as the motherboard fried in. I bought a case of disk external hard to rocketfish to put the hard drive of my Windows 7 pc in. burned does not see the hard drive. my old pc with xp can access all the items on the external hard drive.
Check that the drive appears in Device Manager.
If so, go to disk management and assign a drive letter.
-
system does not see the hard drives as P6000 Windows 7 Pro 64-bit
PC is a little more than a year. About 2 months after installation disk c crashed. Replaced HP drive.
Customer said that she had problems starting and kept restarting. He ran chkdsk and hooked up to 36%
Now the system does not see the drive, but he sees no RAM, etc.
Anyone know what causes this?
Can what information I give to help troubleshooting?
Thank you!
Hello:
Try resetting the CMOS.
If this does not work, I would say that the drive controller in the motherboard is dead.
Clearing CMOS -
laptop does not see the disk of works 9
I have works 9 and I want to install it on my HP laptop with windows vista home premium as a the opp system.
My laptop does not see the cd or one of its files... The packaging says it's compatible with windows vista.
It works on my desktop which has windows xp system opp on him.http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads
For any problems with your computer, not reading CD, ask in the Forum Vista Hardware at the above address.
See you soon. Mick Murphy - Microsoft partner
-
Connected to but the Airport utility does not see the time capsules
Hi, I have several time capsules.
I can connect to the web, but the airport utility does not see the time capsules. I tried to restart the time capsules, router, computer, but I still don't see any of the devices on the network.
What now?
Have you tried the airport utility in the iOS version... Download on the App or iTunes store and load... Works better than the Mac version.
Other than what Mac running what OS do you use?
This modem you have and how is the installation of TC on the network.
-
MAX does not see the devices and interfaces
Hello
Just got a laptop computer to support the lab and installed Labview. For reasons that I don't have understands THAT MAX does not see the com and USB ports in the laptop. The IT Department gacve my rights to admin ID. Any ideas what's happening?
Kind regards
Kaspar
Dennis, as usual, is correct. Please check if you have installed NI-VISA. There is an article in the knowledge base on the way in which com ports are not in MAX unless NI-VISA is installed. The link to this article is below.
http://digital.NI.com/public.nsf/allkb/1FAB687036A2D85B862571490072307A?OpenDocument
-
Have a lenovo t60 disk opportunity was wiped out when trying to install XP Pro, I get message windows does not see the hard drive, but he sees the laptop.
If its SATA you need SATA drivers to install. Since the XP CD doesn't have the SATA drivers on it
Unless you disable the AHCI in the BIOS. Or their wake.
Or get the SATA drivers. Check out them on diskette, press F6 during installation and then add them.
Maybe you are looking for
-
It started about a month or two it y a. almost all Web sites that I visit Firefox lag or stalls pure and simple script error messages, giving me the advice (not responding) to the top of the page or do not respond. I tried all suggestions that I foun
-
Impossible to install the drivers of hp 15-ac184tu
Hi all... im unable to install the drivers for the chipset intel, intel hd graphics drivers... I think that for this reason, my round glow is not neither decrease nor increase... I downloaded all the drivers from the site web hp... pls help me.thanks
-
Plex-like mediaserver for ReadyNAS Duo V1
Hello I have a ReadyNAS Duo V1 and would have a link to watch movies on my Chromecast. Normally the Plex would do the job, but as much as I know Plex is not compattible with the Duo V1 So, what are my options? Thnx Chris
-
API dll windows 10 teststand 2014 SP1
Hello I'm looking for a solution to my problem a few hours ago, but I found nothing. I'm working on Teststand 2014 SP1 32 bit with a windows 10. I did a sequence on the same version of teststand on a windows 7, but I now have a windows 10. I opened m
-
Use underclocked RAM OK? Mix of DDR and DDR2?
I have an old HP Pavilion ze4904us that I am trying to suckle along the inexepnsively. The installed RAM is 256 MB PC2700 DDR 333 clocked at 133 MHz. Can I add a second band of PC3200 1 GB and have the PC3200 underclock to perform at the PC2700 133