my windows vista computer will not except the automatic updates and the system starts it configures only the updates

original title: my windows vista will not except the automatic updates and the system starts it will only configure the process which can be done to solve this problem

my windows vista computer will not except the automatic updates and when the system starts it will only configure the process which can be done to solve this problem

Hi Glennisidore,

Try running the fixit http://support.microsoft.com/kb/971058 in aggressive mode and see if, after the reboot, you are able to perform your edits again.

Tags: Windows

Similar Questions

  • My Windows Vista computer will not install the kb2393802 update.

    I have tried manually and through the auto update facility. It gives an unknown error code. Help!

    Have you checked other related threads?

  • My Windows 7 computer will not find the networks wireless after a system restore.

    My Windows 7 computer is not find wireless networks after I did a system restore. It was perfectly good wifi before the system restore and other members of my family have a great connection except me is not a problem with my router. I think I know what the problem is, but I just don't know how to fix it. So there you go. I did my restore system about 2 days after that we moved on the provider of internet/tv "Comcast" to the tv/internet provider "Verizon". what I think has happened, is that I restored my computer to the point when we had no Verizon so that he could not find the network. Now, since we have Comcast it won't identify this network either, so maybe some of you out there could help me. : D

    Hello Nicolas,.

    Thank you our writing about Microsoft Community.

    If your computer has a wireless network card, Windows will automatically detect the networks wireless in range of your computer.

    You may encounter network or problems of Internet in Windows for several reasons.  Some common problems that can cause these problems are:

    • A wireless network adapter switch that is not enabled

    • WEP, WPA, or WPA2 key or password security issues

    • Cables that are not connected correctly

    • Corrupt or incompatible drivers

    • Missing updates

    • Network connection settings

    • Hardware or software problems

    I would ask you to check out the troubleshooting steps provided in the articles below and check if they help you solve the issue.

    Why can't I find a wireless network?

    Wireless and wired network problems

    Here are some links to site Web de Support of Comcast, who talk about troubleshooting of XFINITY Internet connectivity issues.

    XFINITY TV App: Can't detect your XFINITY home network

    The problems of XFINITY Internet connectivity

    Hope the helps of information provided. Do we know the State of the question, so that we can help you further.

    Thank you.

  • My Vista computer will not be stopped, randomly freezes and gives error Logon process has failed to create the security options dialog

    I have a laptop that has recently (in the last month) developed several questions. These issues are: computer does not, get the logon error message failed to create the dialog box options security when I hit Ctrl alt delete, computer hangs when more then another program is open. How can I solve them? My system is Vista Home premium 32 bit any help is appreciated.

    * original title - several issues need help *.

    Hello

    I forgot to include which could help with the connection of safety problem:

    How to restore the security settings to a known working state?
    (For Vista and XP)
    http://support.Microsoft.com/kb/313222

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • My Windows Vista computer does not see the network or printers that are connected to a computer using Windows XP

    before that norton was installed, it worked, but since Norton was installed AND DELETED, Vista will not see XP or its printers.

    I have checked the firewall and they took two computers, but still no luck.

    Hello

    Did you change your computer?

    This problem occurs if the (LLTD) link layer topology discovery Responder component is not installed on the Windows XP computer.

    Network card in Windows Vista makes network diagrams of connections between network devices that can be used to troubleshoot connectivity issues. Network map uses a discovery protocol called Link-Layer Topology LLTD (Discovery) that queries other devices on the network to determine how the network is organized.

    Windows Vista includes the software components that implement the LLTD protocol. For other devices on the network to display on the map, they must activate a discovery protocol that can meet the demands of mapping from the Windows Vista-based computer.

    I suggest you to install the update on windows XP.

    http://www.Microsoft.com/download/en/details.aspx?amp;amp;amp;displaylang=en&ID=5577

    This reference so

    http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  • my windows vista computer will not be validated

    I recently installed several security updates, and later my windows vista is not recognized as authentic. I bought it 2 years almost with installed before buying it, so I did not any area recovery CD or windows vista. the sticker on the bottom of my laptop is completely worn out. I downloaded an application key finder and have what seems to be a product key valid, but when I try to run the slui.exe it never ends. I get error 0xC004E003. I also never get an option to activate by phone, I suppose that that option no longer exists. How can I fix? It is the kind of a disadvantage and makes me nervous about using my computer on an unsecured network.

    Your error message indicates a "stuck key".

    This particular message occur to try to activate a key OEM_SLP - which can be activated by internet or phone-activated, it is based on the BIOS to activate.

    Your only real option, as you say that the sticker is now unreadable, is to reinstall Vista using the manufacturer's recovery disks or partition - note that this will erase all your data and programs, so be installed first of all external media!

  • My Windows Vista computer will not install SP1.

    He is in the final stage and then returned. I even uninstalled my antivirus to try it.

    Hello

    "How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues"

    Try Resolutiom 2 here:

    http://support.Microsoft.com/kb/947366#resolution2

    See you soon.

  • my windows vista computer does not recognize the cd. I get a code 19, incomplete or corrurpt. I don't know what else to do.

    error message 19, cd/dvd OPTIARC incomplete or corrupted, I don't know what else to do, I inserted the disc gateway and restarted the account to factory... state what a mess I had to install the updates and lost everything. I'm now getting to where it should be but still a few snags in addition to the dvd, when I surf the internet the pointer slips across the screen I can't see the icon on the status bar when I would press the button / mouse on laptop, it would show. It has now disappeared. I have several questions which I'll add later. Help, please! I'M NOT A COMPUTER EXPERT.    In addition, my computer shuts down while I'm online (watch the video live shows) when I plug the power cord into an extension cord with a grounding CE adapter wants to SAY WHAT?

    Continue on the checklist. Rob - bicycle - Mark Twain said it is good.

  • Windows Vista, it will not move in front of the 'Welcome' screen after you enter the administrator login password.

    After you have installed an in place upgrade to Windows Vista, it will not move beyond the 'Welcome' screen after you enter the administrator login password.  The computer works fine in safe mode with network, however I am unable to boot normally without hang on the screen 'welcome. '

    (the system is running pre - SP1)

    Hello

    Start the computer to boot in safe mode with network and check if it helps: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135

    Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.

  • my computer will not install the update of security for Windows XP (KB2481109)

    Moderator before go Note: IE8.
    -----

    my computer will not install the update of security for Windows XP (KB2481109) can you help me.

    Hello

    (a) don't you try to install the update manually?

    (b) you get any error message?

    (c) don't you make changes to the computer until the problem occurred?

    (d) what anti-virus software is installed on your computer?

    I suggest you try the steps below and check if it helps

    Method 1:

    If you have installed a security software on the computer, then I suggest you to temporarily disable a software antivirus installed on the computer and check if the same problem occurs

    Note: Please make sure that you activate the software of Antivirus\Firewall after the test to keep your computer protected.

    Method 2:

    I would say as you try to perform the clean boot and then try to install the update and check if it helps, here is the link:

    http://support.Microsoft.com/kb/310353

    Make sure that return you the computer to a normal startup mode once it's done.

    Additional information: make reference in the link below:

    http://support.Microsoft.com/kb/2481109

    Hope this information is useful.

  • Windows Photo Gallery will not save the edited images

    Windows Photo Gallery will not save the edited images. the files are not read-only; older files can be modified; the most recent files cannot

    Message says photo library was beset with problems and the modified file cannot be saved

    Windows Photo Gallery will not save the edited images. the files are not read-only; older files can be modified; the most recent files cannot

    Message says photo library was beset with problems and the modified file cannot be saved

    ================================================
    Windows Photo Gallery... Cannot save modified photos...

    No guarantees and proceed at your own risk!

    Good luck...

    --

    (1) try to do a system restore to an hour before
    the problem started.

    With the help of the Windows Vista system restore
    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    --

    (2) I've seen reports that this problem may be related
    Kodak Easy Share software. Installation "Kodak
    Single-action Version 8 for Windows from the
    the following link may be the solution.

    Kodak Easy Share 8 software version
    http://www.kodak.com/eknec/PageQuerier.jhtml?PQ-path=130&PQ-locale=en_US&_requestid=5320
    (FWIW, it's a good idea to create a system)
    restore point before installing software or updates)

    --

    (3) I saw reports that could clarify the next steps
    until the question...

    Right click the library icon and choose
    "Run as Administrator"

    --

    (4) I copied the info from a tech forum on
    the net... I don't know if it works, but maybe it's
    worth a try:

    A. right click on Task Manager open the
    taskbar on the bottom of your screen and choosing
    The task in the menu Manager.

    B. click the tab process, along the upper part of the
    The Task Manager screen.

    C. in the process tab, select the corresponding button at the bottom
    left of the screen that says "show processes of.
    all users"and click on it. Click 'Continue' to the UAC
    the prompt that appears.

    D. the screen should turns off a moment, then
    back with much more than process listed. Click
    the "Command line" column to sort the list and
    Search:

    "C:\Program Files\Windows Media Player\wmpnetwk.exe"

    Read the description in the next section on:

    Windows Media Sharing Service reader network

    F. click on this process. Click the end «»
    Treat button"at the bottom right of the screen.
    Confirm 'End process' if necessary.

    You should now be able to save your changes to
    your photos normally. The bad news is that this
    should be performed whenever you start or restart Vista.
    And I don't know how to prevent the situation from
    in the first place of loading.

    --

    5) posted by: artologik
    The solution came to me when I could not recreate
    the problem on a laptop with Vista Home.
    Everything I could compare, I noticed that the
    %Path% environment variable was not between different
    the 2 machines.

    I guess that WLPG relies on the dll must be found
    on the way to the system; When not found, it must return
    Back to ' base or incomplete "library finds it
    the default specific paths or the user. The solution for
    me has been to ensure the entire path system
    to the folders in the order appropriate.

    To fix, follow these steps:

    A. right click on the COMPUTER icon on the
    desktop and choose PROPERTIES

    B. choose ADVANCED SYSTEM SETTINGS

    C. Si you are prompted by UAC to allow, go ahead.
    and ALLOW

    D. click on ENVIRONMENT VARIABLES...

    E. in the bottom half, under SYSTEM VARIABLES,.
    Find the PATH variable and highlight the

    F. click the button CHANGE

    G. ensure that what starts with
    % SystemRoot%\system32;%SystemRoot%;

    H. ensure you that a semicolon separates each entry.

    I. click OK three times

    J. restart the computer

    Good luck...

    John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or the usb ports

    Help with my computer of dumping

    I have windows xp and I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or usb ports. How can I do this without the disc?

    If there is anything physically wrong with your hard drive, you can use Darik Boot and Nuke (DBAN aka) to make a scrub of the security of your HARD drive. Glance to download here.

  • Update for Windows Vista (KB2633952) will not be installed. Receive Error 80070020

    Update for Windows Vista (KB2633952) will not be installed. Receive Error 80070020.

    KB2633952 is an option, not the security update. Feel free to hide it - especially if you do not live in Kaliningrad, Minsk (Belarus), Bahia (Brazil) or Fiji.

  • My computer will not install the last update of security mpam-fex64 [1] .exe. I have__Windows 7 Home premium X 64 based PC. Does anyone have any suggestions?

    My computer will not install the last update of security mpam-fex64 [1] .exe.  I have
    Windows 7 home premium, X 64 based PC.  Does anyone have any suggestions?  Windows gives me the message that the update failed.  I get the error 66 has code.

    Hello sajanclt,

    It is an update of the Forefront client. I suggest you post in the following Forefront Client Forum.
    http://social.technet.Microsoft.com/forums/en-us/category/forefront

    They will be better able to help you.

    Thank you

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Win 7 64 bit computer will not recognize the old jpg files since 2003 of the records that have been transferred to an external hard drive.

    Win 7 64 bit computer will not recognize the old JPGs from three 2003 files that were transferred to an external hard drive...  File appears in the directory but with no thumbnails icon. Does not open in the Viewer, Picassa, Ifranview, paint, PhotoShop.  I get conflicting messages... invalid image (Windows Viewer)... Unknown file format (IfranView)... Access has been denied (painting), a blank image (Photoshop),... You are not allowed to open this file (Picassa).

    Creation 2007
    Last updated on 2003
    2010
    Any help would be appreciated.

    Mahalo,

    Philippe

    Ran the Scan, the system is secure.

    I was able to bypass stubborn files to transfer them to a flash drive and copy them to another folder.  I was then able to access.  Somehow I messed up the permissions in the previous transfers of old machines and OS.

    Thank you for your help and attention.

    Mahalo,

    Philippe

Maybe you are looking for