My Windows Vista is crushed - no recovery disc-screen is black, can not activate, can't not to start, f8, f9, f10 does nothing

Similar Questions

• My Windows Vista crashed on the screen is blue, can not not rebooted, can't not to start, f8, f9, f10 does nothing

  HI.my windows vista crashed.i have recovery disk, but when I do I see this messege:windows in not shoting down full and can not read boot file.and whene I want low shoting or restart I have blue screen.

  Hi, Mohammad Ali G,.

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what is the complete error message you receive?

  (4) what is the number of brand and model of your computer?

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  See the article below

  
  Windows Vista or Windows 7 unbootable and the Startup Repair tool does not resolve the problem
  http://support.Microsoft.com/kb/934540

  Step 2: See the steps mentioned in the link below

  Pick up the pieces after a computer crash
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  For the recovery of the computer back to factory settings, you must contact the manufacturer of the computer.

  Note: Restoration of factor is a favorable condition of a computer as that set up by the manufacturer of the computer and is specific to the manufacturer. This process will put the computer to its original factory condition, data (and programs that were installed later) on the computer will be lost.

  You may need to check the documentation that came with the computer to Factory Restore (System Restore) or contact the computer manufacturer.

  Important: It is recommended to make a backup of your data before performing any Installation of Windows.

• Windows Vista crash, said of recovery is full. How can I remove recovery?

  My wife inspiron 530 s Dell has a full recovery. How can I fix it?

  My wife inspiron 530 s Dell has a full recovery. How can I fix it?

  Buna,

  Your problem has nothing to do with Windows. It is the recovery of Dell.

  Ask Dell.

  Revedere.

• fault, "ntldr" Vista; HP has no recovery disc to use, I do not have either.any thoughts?

  pavillian a6045x, WindowsVista, before the problem I downloaded "service pack 1", then restarted, now I can't start computer, it passes through the chest and then get message: selected information: boot Oxc000000f has not a peripheral need is inaccessible.

  F-11 AT STARTUP: NTLDR is missing. HP said a corrupted hard drive, but they are no longer available to restore disc and would upgrade to windows 7 and the drivers for vista will not work with W7? where can I get a restore cd if I replace the HD?

  Here is the orginal factory specifications for your desktop HP Pavilion Media Center a6045x. You can order the HP recovery disk sets third-party ComputerSurgeons.com

• install xp instead of vista and now the recovery discs are not supported

  Pavilion Media Center PC m8000

  1. installed XP on my laptop on the desktop that had need of Vista by mistake
  2. ordered the HP recovery discs and now they are not supported
  3. Build confirmed IDS
  4. How do I remove the XP completely?
  5. Or should I forget it and try to activate the XP?

  Sincerely,

  A ding dong in denver.

  Hello

  I suggest to perform a new Installation, or if you have a recovery disk, you can perform the recovery of the plant.

  For more information, see these links:

  Install Windows XP:

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/install-Windows-XP

  Installation and reinstallation of Windows Vista:

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  I hope that helps!

• Satellite U500-17F - need Windows 7 for 64-bit recovery disc

  Hello

  I'm looking for someone who is able to copy for me * recovery disk Home Premium Windows 7 64-bit partition for Toshiba Satellite U500-17F * (Czech language - or in English). I resized the partition and delete windows 7 recovery disc, and now I need to reinstall because of disk problems. I don't want to buy a copy because I bought satellite toshiba with windows 7 and why pay twice for the same thing.

  Please let me know if you are able to copy the disc of recovery for me and put it to a web page that I can download it from. You can make a password to avoid abuses.
  I can give you a small donation on paypal.

  Martin

  Hi spurnymartin,

  > removed windows 7 recovery disk
  To be honest that s does not erase. Did you delete the folder in HARD drive recovery or what exactly?

  Usually, you can reinstall Windows drive HARD or Toshiba recovery disc.

  If you n t have it more, you can order the CD from Toshiba. In my opinion you n t pay twice for the same thing because it s not a Toshiba error.

• Windows Vista 64-bit system recovery stopped in the middle of the process, I can't even click F12 and restart again

  I did system recovery on my toshiba m305d-s4840 laptop computer Windows Vista 64 bit and the wire of the laptop was not connected and the battery died, now I can't do anything on the computer I can not even click F12 and restart again once, what do I do to solve this problem, the computer does nothing when you turn it on It's in the green bar at the beginning (loading screen)? Please help, thanks

  Hello

  Whether you use the Toshiba recovery method, I suggest you contact Toshiba support for help with what is their method of recovery which has been interrupted.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  See you soon.

• I have windows vista. I did a system restore. I can restore PIX saved on the backups before recovery was made?

  I have windows vista. I did a system restore. I can restore PIX saved on the backups before recovery was made?

  Hi rich,

  What kind of backup do you have?  If it were a full image backup, restoring them will be difficult unless you restore the entire image.  If it was a normal backup of files and folders, it should be fairly simple.

  Here is an article on the restore procedure: http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  This is a GREAT article on backup and restore Vista process

  http://technet.Microsoft.com/en-us/magazine/2007.09.Backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course.  But it teaches you a lot about what is possible and how to do it.   It also focuses primarily on the full backup process, but he did mention the full backup and restore process as well.

  Here is an article on the advanced use of restoration (during normal restore does not work):

  http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  If the above does not help with your problem, then please go to the special Microsoft Forum dedicated specifically to backup issues and problems at the: http://social.technet.microsoft.com/Forums/en-US/windowsbackup/ for assistance from experts by specialists in this field.

  I hope this helps.

  Good luck!

• the recovery came with my compaq presario cq60 dx211 disks would work with windows vista home premium. the recovery disk, I was created when I had windows vista home basic.

  Windows Vista Home Basic to home premium compatibility

  the recovery came with my compaq presario cq60 dx211 disks would work with windows vista home premium. the recovery disk, I was created when I had windows vista home basic.

  How is - happen you to Vista Home Premium.  No, they will reinstall Home Basic.

• while trying to install sketches of painter Corel on 32-bit Windows Vista, I get the message of the CXML File() - > could not IID_iXMLDocument2 instance. .

  while trying to install sketches of painter Corel on 32-bit Windows Vista, I get the message of the CXML File() - > could not IID_iXMLDocument2 instance. After the closure of this msg several times I get the message .xml configuration could not be loaded. This may indicate that the file is corrupted. I tried downloading the software and the software disc and get the exact same message. Does anyone have any ideas as to what is happening and how to fix it?

  Hello

  ·          You have an earlier version (trial version) of Corel painter, installed on the computer?

  Step 1: If you need to uninstall the trial version and then try to install the full version of Corel painter.

  See: http://www.corel.com/servlet/Satellite/us/en/Content/1248977106333

  Step 2: I also recommend you contact Support Corel to this topic and see if they have a solution - http://www.corel.com/contactus

• Windows Vista Service Pack 2: Compatible blue screens

  Hello. I tried to debug my friends computer. He had regular blue screens of death. I analyzed the dump files and it turned out that he had bad memory in the first 2 crashes (it linked several times windows memory diagnostic tool and even swap ram slots). Then he replaced the memory and now the system worked well.

  And then the system crashed. All of these have been "IRQL not less than ' mistakes, that I discovered by WinDBG. The klif.sys file appeared on the processor stack and was probably the culprit. The file is a driver of Kaspersky Internet Security, so I had him remove the protection completely and use a different antivirus.

  The system has been formatted and it is now ok. IT crashed again, with a BAD_POOL_CALLER. The chain of error checking was C2 which indicates a bad driver or memory. Many riders appeared including the symbols cannot be loaded, even the intel IDE driver, nvidia drivers display, avast antivirus, drivers realtek audio etc. After seeing this, I had to him be updated all drivers for their current versions.

  The system has been authorized for 2 days. IT crashed yesterday again. I give you the link to the minidump file, in the hope of getting members of the community solutions.

  http://www.mediafire.com/?0vy3xrptvzr87c0

  Help appreciated!

  -Kiki: MCP

  Hi Karan1337,

  (1) since when are you facing this problem?

  (2) what is the number of brand and model of your computer?

  Method 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the mouse and keyboard > check to see if the problem persists.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Method 2: Run the Startup Repair tool, follow the steps mentioned in the link below to access the system recovery tools.
  How to access the System Recovery Options menu?

  Run the tool to restart system as shown in the link below
  How to use Startup Repair?

  Method 3: See the steps mentioned in the article below
  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly

  You can contact the manufacturer of the computer for known problems

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes.

  Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes. I tried to reinstall vista without success of the problem being fixed

  Hello

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I have windows vista and somehow my picture turned screen 180 degrees backwards. How can I fix it?

  I have windows vista and somehow my picture turned screen 180 degrees backwards.  How can I fix it?

  Hello FrankHeinsohn,

  Hold down the ALT and CTRL together and then press the left/right/up/down to change the orientation. Press the combination of keys followed by the arrow key to the left first to see if this changes the orientation (you may need to press the selected keys a number of times to get the correct orientation. If the left arrow does not try the right, if this does not work try the high and arrow down.

  Usually, this action solved the problem. If she does not see if you have an icon in the Panel that gives, you go to your video card. Your card might be control NVidia or ATI control panel. Check the tabs until you see an option to change the orientation of the office. Yours, because the cat has his way, is currently portrait, change in landscape mode.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Windows Vista IE9 is is it inserted a way I can set up the so function keys when I click my e-mail address?

  Windows Vista IE9 is is it inserted a way I can set up the so function keys when I click my e-mail address?  THANKS in advance

  See my response here

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/macro-recording-in-Vista/ef061942-8665-4d27-9222-dcd761936386

• I have re installed the operating system on my Dell Studio 15 for Windows Vista 32-bit. But now the network controller is not working and I can't use wireless internet

  I have re installed the operating system on my Dell Studio 15 for Windows Vista 32-bit.  But now the network controller is not working and I can't use wireless internet, but I can plug a cable ethernet in there and get online.  What can I do?

  I have reinstalled the operating system on my Dell Studio 15 for Windows Vista 32-bit.  But now the network controller is not working and I can't use wireless internet, but I can plug a cable ethernet in there and get online.  What can I do?

  Install the appropriate network device drivers and software from the Dell downloads web site for your particular model, or better yet, tag Service...