my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem. __

Similar Questions

• my windows firewall does not start and I get a erroe code 5, can someone help me

  my windows firewall does not start and I get a erroe code 5, can someone help me

  Hello

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  Method 1.

  To resolve this problem, click the fix button of this article to diagnose and fix common Windows Firewall problems automatically.

  Some services start not in Windows Vista and Windows 7: http://support.microsoft.com/kb/943996

  Method 2.

  Automatically repair the settings of Windows security to secure your PC: http://support.microsoft.com/mats/Malware_Prevention/

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

  For Windows 7: back up the registry: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I hope this helps.

• Sometimes the audio does not work and another day, everything is ok. What can this be? IK have an Asus laptop and I work with windows 7. The melody of the beginning when I put on my laptop is ok

  Sometimes the audio does not work and another day, everything is ok. What can this be?  IK have an Asus laptop and I work with windows 7. The melody of the beginning when I put on my laptop is ok

  Hello Ronald.

  A problem are not uncommon. Something for you to try:

  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• Windows Vista does not start upward, with success since the closure complete

  Hello world

  I actually had this problem for a long time, but I'm just now to a point where I'm ready to take a lead in fixing it.

  I can't identify when it started, but Windows Vista does not start upward, with success of a full stop. He gets to the screen where, in general, the green bars will travel across the screen, but the green bars will not come. The screen looks dim and sits there, with the text of the copyright of Microsoft Corporation. So, after not having on the mound, I have to manually shut down the computer by holding down the power button. When I try to start again, told me to go through the Startup Repair tool. If I jump the repair, I just have to meet the same problem - a computer that will not go beyond the screen "green bar".

  So, I do the Startup Repair, and told me what I do for the restoration of the system. Windows starts normally after the restoration.

  Don't forget, this happens from a full stop. To remedy this, I just never completely shut down my computer. I left running and back just at the beginning of the day. The computer may start restart, it just may not start with a full stop.

  Given the start of repair takes, literally, around 4 or 5 hours of full stops complete, accidental or power outages are a nightmare, I am obliged to wait 5 hours to get access to the computer. Fortunately, I have my laptop.

  If someone has encountered this? I saw people talking about the loop of startup repair, but that's not the point, I have. I have yet to see any discussion of my specific problem.

  Thanks in advance!

  Hello

  4-5 hours to do a startup repair is too long.

  Often you get better results if you a using a DVD of Microsoft Vista startup repair.

  Jose how to do a startup repair, etc. using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• Wil Windows 7 does not start and is not able to solve the problem

  Hello

  I tried several things at this stage. I have a Toshiba that windows is not able to solve the problem on its own when starting. InsydeH20 BIOS, I have ensured that the system must start using the HARD disc as shown.

  When the problem started he said that the problem could have been caused due to a media device may have been connected to the computer and that Windows could not fix the problem automatically. I was then able to enter the menu to try to do a system restore; It did not work. From that moment, I opened windows to use the F8 key and was able to start using the corrupted files, but now after a update tried to install all I get is a black screen with a white line of underscore flashing in the top left of my screen.

  I downloaded an ISO file for Windows 7 from my other laptop and was able to boot from there to get to the point where I would be able to try a system restore, use the prompt, etc., but even once it is not solved the problem.
  At some point, the screen showed that there is a cable that is not connected or something, I don't not entered all of this, but I do not know how to check this part of it. Could someone please give me direction from here to what I can do?

  Thank you

  > However now after a tried update install all I get is a black screen with a white flashing line of underscores in the upper left corner of my screen.

  This is a typical symptom for a faulty HARD drive.
  I had the same cursor blinking in the upper left corner and finally I could solve this problem using the new HARD disk.

  > At some point, the screen showed that there is a cable that is not connected or something.
  Maybe you mean the error: pxe/e61: mediatest failure, check the cable of
  This happens if the portable computer is trying to boot from LAN. This happens because the OS on the HARD drive is not bootable, and this happens especially if the HARD drive is malfunctioning

  In my opinion, you need to change the HARD drive.
  I think this should solve the problem.

• Designjet 111 does not start prinring or stops in the Middle

  Hello

  I recently bought a designjet 111. The first page I printed (linedrawings) came out perfectly, the second page, I tried (linedrawings + a few pictures) the printer no longer starts.

  Now, I have the same problem: the printer just will not start. I tried to turn my laptop and printer, changed USB ports, off the sign 'offline',... nothing seems to work.

  Then all of a sudden it started printing (not sure what I did differently), but stopped after 5 centimeters, drove from the page and cut it. I tried again and then print 30 centimetres and stopped. Now, it does not print at all.

  What can I do?

  OK, problem solved by changing the usb cable to the laptop.

• Whenever I try to download or run a document he returns constantly with a message saying "it contains a virus and has been deleted", what can I do to solve this problem.

  I had a problem with my laptop because whenever I want to open a document of work applications etc it tells me just that the document contained a

  virus and has been deleted, how can I solve this problem because it becomes a little embarrassing now.

  Hi Colette.
  Your computer is probably infected by malicious software. Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide/
  It provides simple instructions on how to remove malware from a computer. If you have any questions, just ask. I hope this helps you.
  Brian

• Windows Vista 32-bit system: Windows Update installer told you can't install updated code error 80070102 what can I do to solve this problem?

  My computer couldn't install updates for awhile, I tried everything I know possible to do. I restored my computer to factory 2 different times and still nothing. It is said there are 8 important updates that must be installed, but since there is no way have to install because of the error I have no way to install them. If anyone has any ideas on how to solve this problem, I would be very grateful for your help.

  Hi BritaneyFlorance,

  The factory restore process is provided by the computer manufacturer. Visit the Web site of the manufacturer for the factory restore instructions/troubleshooting steps specific to your make and model.

• Pavilion dv4: Windows 7 does not start and I can't access the system with f11 recovery

  I use a Pavilion dv4. Windows just crashed on a blue screen with a message about physical memory dump. Now when I start the computer it will just a black screen with a blinking cursor to the place when windows normally should start. I can not access the system with the f11 key recovery. I went in with the f2 key diagnostic mode. Diagnostic tests except for the battery test that failed, but shouldn't the laptop to be able to run without a battery if it is connected? And besides, if the problem was the battery, the laptop wouldn't be able to turn on at all, no?

  I'm not about to spend all that money on a battery just to know that it is not the battery.

  Hello

  If you have the 64 bit rescue CD, you would have received an error if it was bad.

  Once you have all your data backup, try the following - which means that Windows has been installed on the C Partition.

  Boot from the new rescue CD, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart now.

  Kind regards

  DP - K

• Windows Firewall does not start, and the service is missing

  I'm riunning windows 7 pro (64 bit) when I go to set the default settings of windows firewall, it is said "windows firewall cannot change some of your error code of 0 x 80070424 settings." IM current essential security for the AV. I get to a sirefef. Infection of AB (which has been deleted) but when I look for my firewall service its gon - not here. I tried the Fix - tool and it didn't fix it. Any ideas?

  Tom,

  80070424 means that a required service is not present or running.

  First of all, make sure that all your personal data and program installation files are saved in one location other than your computer, as soon as POSSIBLE.

  What is the installed security/antivirus suite. is it's subscription and current definitions; whatever it has detected the last time that the system has been analyzed with it?

  Please run this tool Kaspersky to see if it is "hid" software malware present - How to remove malware belonging to the family Rootkit.Win32.TDSS

  If TDSSKiller.exe does not detect anything, then suggest you try to download and use thescan of Microsoft Security
  If the safety of MS Scanner cannot be downloaded or run, then try to do a scan online -ESET Online Scanner

  IF you still can not use all that above, then suggest you use another computer to burn a rescue CD which will be that you will be able to your computer so that the hard disk is not active-

  How to create a BitDefender rescue CD
  or
  Kaspersky Rescue Disk 10

  UTC/GMT is 00:11 Sunday, July 22, 2012

• Satellite M45: Windows XP does not start when you click on the user name

  I have a portable Satellite M45 in XP service pack 2.
  After starting the PC, he gets that windows journal under the screen, I click on connect my name and nothing happens.

  I have completely reinstalled the operating system, updated all drivers etc, and it was fine for one night.

  The next day, I'm back to square 1 and cannot log in again.
  It starts in safe mode, but I don't know how to start to solve the problem.

  Can someone advise please?
  Thank you

  It's very strange!
  Have you removed any spyware or Trojans?

  Question you is really, really strange, and I guess that the 'bad' software causes such problems...
  It seems that something changes that replaces Userinit.exe.

  A similar question has been described here in the MS knowledge base:
  http://support.Microsoft.com/kb/892893

  It seems that some registry have changed and that's why the connection does not work correctly!

• Installed new module memory for laptop, found original was bad, while windows Vista does not start by going blank after the "status bar".

  I have a Windows Vista running on a Sony VIAO laptop and has been updated with level 3 to 4 GB of memory. During the memory test, I found that 2 GB of original module was bad and replace it with the new 2 GB module end back where I started with 3 GB. However, Windows starts only at a little past the rectangle with 3 points moving ("State Bar"?) and them it goes to black and the desktop never appears. I tried to roll back to the last working version of Windows settings, but always the same results.

  What can I do now? Is there a way to check and fix disk errors?  Is it possible to install Windows XP Pro or I have to go to Windows 7.  I even has System Mechanic Pro running on this laptop and it did help some casued the problem. It's as if the disc is damaged for some reason any.  Only with Vista felt this helpless.

  It seems to me that the new memory you have installed is bad or incompatible with the system.  First, remove all chips and reinstall them and then try to make sure that they are correct and secure again - don't just press them in place, effectively remove and the replacement and make sure they are in the right direction.

  Boot from the Installation of Windows Vista genuine disc (or you can borrow from someone) or a recovery disc with recovery options included in this topic. If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD (perhaps made on another computer, or perhaps in SafeMode with network if it does not - that would be a good sign if it is true). You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.  Select recovery options and follow the instructions until you see the menu.  Once there, select the Windows Memory Diagnostic tool and run it and see what it says.  If it detects problems (and I suspect it might), you may need to replace the new chip memory.

  I hope this helps.  If this isn't the case, after return and we will try other options.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Partition Windows 10 does not start after you have created the new internal drive

  I'm running OS X 10.11.2.

  I have set up a training camp 10 Windows on my Macbook Pro sometime ago, but today I realized that I need more storage. I watched how do so online and came across this thread:How to resize my bootcamp partition without deleting chtol. I followed the instructions, but could not know how do I find my Windows partition.

  So I think that I have the problem described here: repair Boot Camp after having created the new partition. I did what Christopher Murphy described on the first page and this error message appeared when I pressed "w ":

  "Failed to open device ' / dev/disk0 ' for writing! Errno is 1! Writing of abandonment! »

  I deleted from the extra without internal hard drive name in the hope that he'll fix it, but it didn't.

  I would like to enlarge my Windows partition, but at this point, as long as I can access my Windows Bootcamp partition, that would be great!

  EDIT: I unfortunately do not back to the time Machine.

  Resizing Windows partitions is not officially supported by Apple - Boot Camp: resize the Windows partition .

  Please after the release of

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

• Windows Update does not start and other problems...

  When I connect to windows update, the page becomes white and everything continues to load.  I can't start in safe mode to run all the patches.  I also have an annoying problem of svchost that takes more than 90% of my memory.  I ran every virus known to man program... MalwareBytes, Kaspersky, ESET, to name a few and they all say that my computer is clean.  I am running windows xp pro service pack 3.

  Hi Bopatop,

  1. did you of recent changes on the computer?

  2. you receive an error message?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click on Start , then run.

  (b) type msconfig , and then click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services , and then click OK.

  (d) when you are prompted, click restart to restart the computer.

  Also, check out the articles below and check if that helps.

  You receive an error message after a Windows XP-based computer runs an automatic update, and you may be unable to run any programs after the closure of the "svchost.exe - Application error" error message dialog box

  http://support.Microsoft.com/kb/927385

  A description of Svchost.exe in Windows XP Professional

  http://support.Microsoft.com/kb/314056

• Satellite P305-S8996E does not start and displays Toshiba screen starts only

  Hi guys, I have a problem,

  When I turn on my laptop seems to start form toshiba but that of all, still shows only Toshiba start screen.
  On the right side in front of a computer laptop keyboard from inside I still hear a low repetitive sounds like there's something stuck or something doesn't work correctly.
  I would like to ask if you don't know what the problem is.

  Thank you for the help

  Seal (Slovakia)

  All joint news?
  Did get the workbook?

  You should be able to access the BIOS, even if the HARD disk is defective.
  In case of HARD drive failure, the BIOS will not recognize the HARD drive and the details of the HARD drive should not be entered in the BIOS (first page of BIOS) settings

  In case the HARD disk is OK, you should test the modules RAM module defective RAM (one or both) is supposed to prevent the laptop to boot the system.