My Windows XP GMA 3100 monitor goes black randomly and returns

Similar Questions

• Screen goes black randomly and the mouse resumed normal functions

  My screen started to be empty at random. It seems to do a quick fade to black as if the power manager is turn off the screen. The PC stops not is and shake the mouse he brings.

  I checked my video driver, malware, power settings (currently any screen power off or power off is disabled). Went to powercfg and checked last wake-up factor, but it does not list everything. If it's just a removal of the power management screen, not sure it would be listed here because it is not a full power down.

  Is there a way to tell if it is the power Division of the screen Manager and if so, what is the cause of do?

  I begin to suspect my keyboard although it's just a hunch. It's an old v1.0 MS Comfort Curve Keyboard 2000. Keys become a little sticky, although there is no any button power on this issue (like the old buttons suspend) and from the keyboard Manager, he was very much tied to her. According to me, it came with a mouse since I replaced it with a mouse Spawn CMStorm. Perhaps there is an intervention of the strange?

  Original title: off dead zone screen

  It doesn't seem to be a thermal problem of graphics card. Seems not be related to what application is running, or at room temperature and it seems to come back with the movement of the mouse (and stay off without moving the mouse) this is why I suspect something to do with power management.

  Any suggestions?

  It looks like the mouse driver or firmware causing trouble...

• Why my monitor goes black after a minute?

  I have my standby power setting to turn off the monitor after 15 minutes when it is plugged.  But if I don't move the mouse or press a key for a minute, the screen goes black.  It's very embarrassing, especially if I watch a video.

  Is there another setting somewhere that says monitor going black after a minute of no activity?

  Thank you

  PAM

  Hi Pam,.

  Here's another setting worth it.

  Right-click on an empty area of the desktop and select Personalize.  Click the link to screensaver at the bottom right.  In the next window, adjust the time before the screensaver kicks in the drop "Wait" to a more acceptable value.  Click on apply, then Ok to save the change of the parameter.

  Kind regards

  DP - K

• Monitor goes black at startup

  Original title: blank screens!

  Dell Optiplex 745.  Monitors go into powersave at startup. Screens are black, but the system is still running.

  Hey, Jay,.

  The monitor started all this?  He worked the day before or if it has been the current behavior?

  Follow the suggestions below to diagnose the potential failure of the motherboard.

  http://www.pcguide.com/TS/x/comp/mbsys/gen_Failure.htm

  Check the motherboard

  http://www.5starsupport.com/FAQ/motherboard.htm#10-1

  Start > right click on my computer

  Select manage

  Select Device Manager

  Click on the + sign next to display adapters

  Right-click on the adapter and select uninstall

  Click on the + sign next to monitors

  Right-click on the monitor and select uninstall

  Close the Device Manager

  Windows will reinstall the drivers on reboot

  Restart the computer

  It works now?

  Check the response from Shinmila:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/monitor-goes-directly-to-sleep-mode-at-boot-up/588cb415-59F3-4885-A316-200493bd71e2

• HP G60 laptop - monitor goes black but power stays on

  When I press the power button, lights up the laptop, I can connect to windows, but then the screen goes black after a few minutes or as soon as possible.

  -The power stays on and does not turn off or restart

  -I can hear the fan spins again

  -I see very very very vaguely the screen that I should be seeing, but no mouse or cursor

  -J' tried to take out the battery

  Anyone know what I can do?

  Thank you, Julie

  If you can see the desktop very weakly, then I guess the backlight is dead/dying

  Edit: view, works does not for any reason any

• The program Pro first monitor goes black very frequently

  I had a few problems with Premiere Pro because I upgraded to El Capitan last year, but the biggest problem has been the program monitor goes black while editing.

  It can happen at any time after the seemingly any task. Once it goes black, the only way to solve this seems to be to quit the application and reopen it. I can always perform any task I want, and you can still hear the audio on playback and washing, but I don't see all the video of the program.

  Sometimes I can perform an action until it goes black again, sometimes it may take a few minutes.

  I had recently replaced logic board and have installed the latest update of Premiere Pro, but the problem is only getting worse. Today, the software was virtually unusable.

  Data sheet:

  Premiere Pro CC 2015, build 10.3.0 (202)

  MacBook Pro (retina, 15 inches, end 2013) (recently had map logical and retina display, replaced by Apple)

  El Capitan 10.11.5 OSX

  Processor 2.6 GHz Intel Core i7

  Memory 16 GB 1600 MHz DDR3

  Graphics Intel Pro Iris 1536 MB

  Seems to be common, but perhaps for different reasons, depending on your configuration. These discussions could help:

  Re: The program monitor will randomly black

  The program monitor keeps going black in first Pro CC

• Spectrum x 360: screen goes black randomly when on battery and some energy-saving options enabled

  Hello everyone,

  I bought this fantastic machine called spectrum x 360 and I love it.

  Unfortunately since the early days I'm facing what I think it's a problem of driver/software (not the related material).

  This problem only occurs when I'm on Windows, not in the bios or at the startup. JUST IN Windows envinroment, especially after the login, and when the computer was turned off. Sometimes when I use it after a while, randomly.
  This occurs only when the spectrum is on battery. The problem does not appear on AC adapter.

  Problem: the screen goes black randomly for a few seconds and then reappear, sometimes the entire image on the right slide and there is a part that looks like yellow and corrupt, then goes black and reappears.

  Windows Version: I'm on Windows Home 64 bit, build 14393.321 10 (update of the anniversary).

  The entire screen works fine for normal operations, no artifacts.

  Replication of the problem
  Initially, I was able to reproduce the problem with the driver build 4360 (which is the version of the driver from the HP site). Whenever I loaded the home page of youtube and the banner has started playing on the screen went black sistematicly.
  Then I updated the GPU driver through the Device Manager, which has improved my GPU driver to 21.20.16.4494, as of July 25, 2016 and the problem happens much more rarely.
  Now I am facing this problem again but Edge works correctly and is not the cause of the problem, it can appear even when I don't do anything with the PC.

  I noticed this problem appears when saving options are enabled for the Intel GPU (I'm trying to translate this to English because the GPU driver Panel is in Italian):
  
  -update panel houses;
  -advanced mode; energy saving
  
  If I disable these options, the problem does not appear or, better, for I've tested so far, he could not displayed when options are not in market, but I have not tested this very long to be sure.
  
  In my opinion, there is a bug in the display driver, or some customizations made by HP causes problems with the driver.
  The rest of the computer works correctly.
  Any idea to solve this problem? Or should I keep these options turned off power saving?

  Hi, thanks for your help.

  I have a passion for COMPUTING and ex-computer SCIENTIST, I am familiar in surveys on hardware/software questions and hope that this post will help some users get rid of this problem.
  Black screens and screen corruption has been issued by the option called "auto refresh Panel" energy saving.
  I did a lot of hours on battery (condition where this pop ups problem) in these days and the problem didn't show when it was turned off.
  To verify that I tried to activate "Panel options self-identity" in certain occasions and, at random, on the first boot of the machine (after being turned off) the problem arises again.
  It certainly is a problem with this energy-saving option.
  Now everything works fine.
  If the problem appears again, I will post more information.
  Thank you for your support.
  
  I think it would be useful to stick this post on top in this section of the forum, to be useful to other users and being more visible.

• iPhone 6 screen goes black randomly. Hard reboot solves the problem temporarily

  Hi all

  My iPhone 6 screen goes black randomly (usually during sleep) and when it happens, the fact response to touch or no sound. I know that the phone is on because I can always call another phone and it sounds on the line, but as I said the iPhone does not ring. Hard reboot (press home + power button for a while) will not solve the problem immediately after the restart, but after some time (hours or days), it goes black again and I have to do the same thing.

  No idea why this is happening? Is it a software or a hardware problem?  I'm really curious to know how to restart the phone resolves the problem.

  I am not able to take it to the bar of the kind of these days because of my busy schedule. I wonder what they need to replace when I take it to the store.

  Please, share your ideas.

  Thank you

  Sounds like a problem of software for me, especially because it forces is a troubleshooting step software, and you say that solved the problem (of least temporarily).

  However, I still think that the Genius Bar would be a good idea. They have access to diagnoses that are not accessible by the user, who can easily identify which applications or processes are causing the problem. I think that they can also do this by phone, but I rarely call support so I am not sure.

• Start normal mode after windows xp bar charge it gives black screen and in safe mode it gives blue screen

  Victorinox original title: Black scree & blue screen...

  So my laptop that is running Windows xp, start in normal mode after windows xp bar charge it gives black screen and it stays like this, and in safe mode it gives blue screen, what can I do? I need your help atleast to save the files to my hard drive...

  Hello

  · What is the error code or error message that you receive when the computer starts in safe mode?

  · Were there any changes made on the computer before the show?

  · What is the number and the model of the computer?

  · Who is the service pack installed?

  Try the methods below:

  Method 1: Disconnect all the devices connected to the computer such as printers, scanners or USB hard drives and restart the computer and check if that helps.

  Method 2:

  Try to start your computer in last known good configuration. You can check the link for the procedure: how to start your computer by using last good known Windows XP Configuration: http://support.microsoft.com/kb/307852

  Method 3:

  You can follow the steps listed in the link: after the Windows Logo appears, or after you log on Windows, a Windows XP computer can display the wallpaper, a black screen or a blue screen: http://support.microsoft.com/kb/318027

• T410 monitor goes black intermittently

  Running Windows 7.

  I have read similar problems that others have posted, that is the screen turns black during start-up. My machine starts very well, but every few minutes the screen goes black / dies - no backlight.

  It takes a minute or two, then the display will return to normal. Then it goes black again. Then it returns to normal. He does not sleep, HARD drive keeps spinning.

  I checked the graphics driver - no update available. I reinstalled it in any case. Bed help lenovo thinkvantage - utility-is of no help.

  At this point, I wonder about the integrity of the motherboard.

  Help! And thanks in advance.

  Thanks for the quick response.

  After validation, it gradually occurred to me that something that I might be the problem. A few months ago, I cut the end of a cable to the wide and plugged VGA on the laptop, using the screws to make a firm connection. The "stump" of cable extended about 20mm, and that I have attached the ethernet cable and the power cable with a cable tie. (This was done to prevent stress on the connections that I move the machine around the room.)

  It works very well and has worked without a hitch for months.

  As I said, after validation, I started to wonder if the break of the end was the problem - stray strands of son intermittently touching a cable, they should be isolated, in force at random to fill various pins on the VGA output jack.

  To test this situation, I upgraded the insulation of the wires from the end cut off and, of course, no more display problems.

  (Feeling stupid and clever at the same time.)

• After scoring in Windows 7, the entire screen goes black

  I have a Windows 7 computer with 3 user profiles.  When I connect to the computer with one of the user profiles the entire screen goes black.  If I do a control + alt + delete then I may see a blue screen even once to disconnect me but if I connect with the same profile again then the screen becomes black.

  When I connect to the computer with the other two profiles, the screen is normal and I see the desktop and fine icons.

  Any ideas how to fix the user profiles that gets a black screen after login?

  Black screen after that Cruiser connection still works

  http://social.technet.Microsoft.com/forums/en-us/w7itproperf/thread/d47aece7-5e12-46EC-8d3e-e8671730a7ce

• HP pavilion 22xi backlit monitor goes black screen when using

  I have

  led screen have a HP Pavilion 22xi.  It is a year and no warranty left.  He started to go to a black screen when you use it.  I have to unplug the monitor for the display.  the power light lights up but won't stop him.  I saw a few ppl having the same problem, without success to get this resolved.  I tried external monitor on another laptop and have the same problem.  I replaced the AC adapt power and also downloaded the drivers for the monitor.  It's very frustrating.  I tried to reset to factory setting, and nothing changes.  It works for a while, then all of a sudden go to black screen and I have to unplug it from the back.  Please help...

  Hello @squiggy,

  I understand that your LED HP Pavilion 22xi screen just shuts off and will not turn off. After reading your post, it seems that the problem you describe seems to be a physical problem. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.
  
  I want to thank you for display on the HP Forums. Have a great day!

• monitor going black

  whenever I'm in the computer of my monitor go black for 15 or 20 seconds, then I have to left click

  Hello

  Access the site on your computer or the manufacturer of the graphics card > drivers download Section > then key in your computer or a model number graphic card > find your operating system > find two graphics / video or the drivers of the Chipset and download and install.

  And make sure that the cable between the monitor and the computer is firmly attached at both ends

  See you soon.

• Screen goes black randomly

  The issue I'm having is that my Vaio VPCEE32FX Laptop screen keeps going black. However, I see a faint image on the screen if I shine a flashlight on the subject. Also, I can get the screen to return to normal if I press hard directly on the cell to the right of the track key (where you would have your right Palm while typing) while lifting the lower left corner of the laptop (kindof bending the laptop a bit). I heard that the inverter can fail however when I 'bend' the laptop to 'solve' the problem is far away where the inverter is. Could I have a loose fitting. Y at - it something near the pad mouse that could become loose. I check the hard drive and it is correctly fixed. Help, please!

  The issue I'm having is that my Vaio VPCEE32FX Laptop screen keeps going black. However, I see a faint image on the screen if I shine a flashlight on the subject. Also, I can get the screen to return to normal if I press hard directly on the cell to the right of the track key (where you would have your right Palm while typing) while lifting the lower left corner of the laptop (kindof bending the laptop a bit). I heard that the inverter can fail however when I 'bend' the laptop to 'solve' the problem is far away where the inverter is. Could I have a loose fitting. Y at - it something near the pad mouse that could become loose. I check the hard drive and it is correctly fixed. In addition, move the screen does nothing.

  Help, please!

• The laptop monitor goes black after the external vga connection screen

  Hey,.

  I have a Qosmio G50 - 10H, Windows 7 32-bit. After connecting to an external monitor, the internal laptop display becomes almost black. It is possible to see some items on the screen, but it is dark gray to work on. It does not much adjustment of color or brightness (black to very dark grey). The main problem is when disconnecting the external monitor monitor internal still is dark gray and still does not have many adjustments. It's so dark on the adjustments of brigthest that it is impossible to work. I downloaded the latest version of the driver for the support, but still the same problem.

  Any suggestions?

  It is somewhat strange.
  You can switch between LCD and external monitor by using the FN + F5 key combination?
  If you can switch to the LCD only again everything OK?