My Wireless Laser Mouse 7000 does not load correctly

When I go to load my mouse that it will begin charging and the Green led will be lit. But after all minutes the green light turns off and then it starts flashing red. The charge only lasts for 10 minutes. Is there something that can be done to solve this problem?


Hi MageeT,

If it works well before?

(a) replace the battery

(b) check whether the device works on another computer

Thank you, and in what concerns:

Ajay K

Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • My Bluetooth laser Mouse 5000 does not work correctly.

    Original title: Laser Bluetooth Mouse 5000

    I have a Microsoft Bluetooth Notebook Mouse 5000 that has worked, but no longer works.  Read everything here makes me think that he must be a genius to get the updated drivers.  I thought it was 'plug and play' not what I expect from Microsoft at all.

  • Compatibility of the 'wireless laser mouse 7000' with 'wireless laser mouse 6000 receiver.


    One of my colleagues gave me his extra Wireless Laser Mouse 7000, but he gave me a Wireless Laser Mouse 6000 receiver. will be the mouse 7000 and 6000 receiver work? are they compatible?

    help someone?


    Yes those should work - just install the software (Intellipoint) and configure the mouse than the 7000.

    IntelliPoint - free

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • User profile does not load correctly, the user could not be connected.

    I tried to login to my account to administrator with my correct password and it says "user profile can be connected, user profile does not load correctly ' or something to that effect. Even when I login as a guest and enter my admin password on the user accounts settings and click ok, it won't let me access or modify accounts. Please help me, I am not able to access one of my documents or pictures of my guest account.

    ·                         Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    If the above does not work:

    Difficulty of a corrupted user profile

    After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.


    A temporary profile is loaded after you connect to a Windows Vista-based system

    See you soon.

    Mick Murphy - Microsoft partner

  • Desktop computer does not load correctly

    We can no longer switch uses profiles without having to reprocess the computer because the Office does not load correctly.  When we switch between profiles of uses without reformulate the computer, we get an error message indicating that "your office is not load correctly... loaded in safe mode.

    This start happening a few weeks ago.  This problem occurs every time that we move from user profiles or log out, and then move the user profiles.  We have to reprocess the computer on the desk in order to load successfully.

    All that we can do to fix this?

    If this problem was not more than 15 days ago, and if you remember the date when you did not have this problem, please do a system restore. Choose the date when there was no problem that your restore date.
    If this does not work, please do a check of the filesystem (sfc/scannow)

    Procedures for system restore:
    Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
    To sit and wait. The machine restarts when it's done

    File system (sfc/scannow) check how to:
    Start button > Search box type cmd > look up, do a RIGHT click on cmd.exe > click on Run As Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press the ENTER key.
    Note: there is a space between 'sfc' and ' / '.
    To sit and wait. It will take time.
    When finished, exit the cmd window.
    Reboot (restart your computer)


  • The Manager.exe HPConnection does not load correctly. An error message is displayed each time


    I have recently upgraded to windows 8 and since then, I have a problem.

    The Manager.exe HPConnection does not load correctly. An error message is displayed every time that restarting the laptop.

    Would you please guide me how to solve this problem.

    Thank you in advance and I look forward to hearing from you soon

    Best wishes


    Try the following

    Firstly, uninstall your current version of HP Support Assistant using Microsoft 'Fixit' at the following link: this is particularly useful for correcting problems that may prevent resettlement on the machines running a 64 bit OS.

    When this has completed, restart the laptop.

    Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.

    After installation, restart the computer again.

    Kind regards

    DP - K

  • WSDL does not load correctly

    I get the following error (from the event 'fault') when I try to call a Web service via an application running on a Mac (OS X 10.4.6, Safari and Camino):

    Cannot invoke the MethodName method as WSDL does not load correctly
  • Problem loading Wireless Laser Mouse 7000

    I just bought 2 7000 wireless laser mouse. I can't get either one to load. I reinstalled the battery several times, moved to different outlets and nothing. It keeps blinking red.

    Can someone tell me what I am doing wrong?
    Thank you

    I have the same type of mouse exactly, same problem and paper trick didn't work either, but I thought about it! All you need to do to fix is make sure you cut the mouse before you put in the cradle. After the paper failed, I turned off the switch on the bottom of the mouse and is only charged perfectly no problems until now! I hope that's all I had to do to fix it!

  • Wireless Mouse 5000 does not work correctly when moved away from the transmitter.

    I have the mouse as shown in the title with new batteries.
    My installed OS Windows 7 x 64 SP1. A clean installed on the computer without additional software in the meantime.
    When I connect the transmitter (2.4 ghz v7.0 model 1423) the mouse to the computer, it identifies only, and the mouse works.
    In devices and printers, the transmitter is under indefinite and after installing IntelliPoint 8.2 64-bit for Windows 7, it remains the same.
    Sometimes the mouse does not react on the screen, as it got stuck and moving in parts rather than sequentially. Including the mouse buttons that do not meet at the moment.
    If I bring the mouse close to the transmitter, the problem goes away and it works fine.
    After the test, no relation to the load on the processor, the problem appears randomly.
    I tried to replace USB ports but no change, the problem goes away only if I put the mouse close to the transmitter.
    Original title: Wireless Mouse 5000

    Hello Tomer,.

    Thanks for the reply.

    You can check the following items and check if it helps to solve this problem:

    The wireless keyboard or mouse may not respond and may start and stop at irregular intervals
    Troubleshoot a wireless mouse that does not correctly
    Troubleshoot the incidents of the response to the mouse or wireless keyboard

    If the problem persists always, as mentioned above, contact Microsoft Hardware support for assistance. All material related to problems are treated by them.

    Email us if you have any other issues related to Windows.

  • Microsoft Wireless Optical Mouse 2000 does not work.

    Original title: mouse

    I use a Microsoft 2000 wireless optical mouse on my laptop and it won't work, even if you say that my device is not working properly

    Hey nanapaw,

    Please see two items of the below knowledge base for help.

    Troubleshoot a wireless mouse that does not correctly

    Troubleshoot the incidents of the response to the mouse or wireless keyboard

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Microsoft Natural Wireless Laser Mouse 7000


    I have a 7000 Microsoft Natural wireless laser mouse that I bought as part of a package with a keyboard. The problem I have is the mouse didn't cause the Web page, I've been to zoom in 1000% without me clicking on it, I would like to get back to 100% but he would do it again, it would start then zoom in with all the way to 25%. Also, I can't click on the red x to close a window. On my desktop mouse has already made something as if I dragged something to move. It also uses the left button as if it were a right-click opening things while all the other buttons do nothing. I checked al the configuration and the buttons are assigned correctly. I'm really confused and it is difficult to explain (its like the mouse that has a mind of its own), but I tried everything from changing batteries, uninstalled the software and put it back in place and even move the receiver to another USB port wireless. I have no more ideas about what I can do to make my mouse works normally again. Please could you contact me and advise on what I can do then, as it is very frustrating and practically impossible to use the computer with the mouse behaves as it is.

    Thank you


    Test the product on another computer:

    To help you determine if the problem is due to your computer or device, try the mouse on another computer.

    See also:

  • Satellite Pro L650-165: Texture does not load correctly some games

    I have a very strange problem where on some games textures on models of players do not load correctly.

    Looks like it loaded textures for minimum texture settings. Curiously, it seems only to influence the clothing, so I'll break down detail the faces and hands but bodies low resolution.

    All other textures loading correctly, all the effects look as it should.

    It happens on Call Of Duty: Black Ops, Half Life 2, Dead Space and Fallout: New Vegas. But this does not happen on Crysis, Crysis: Warhead, Bioshock 2, Gear Of War, and the demo of Just Cause 2.

    Anyone know of a solution?
    My drivers are up to date.
    Is my broken graphics card?
    I have to wait for Toshiba to release an updated for the ATI 5650 driver?


    I don t think that your graphics card could be broken because it doesn't play other games.
    Maybe you should check the graphics settings in the game.
    You can change the graphic details game options.
    I recommend also check the forums of unique games in most cases you can find other people who could provide some tips.

  • my user profile does not load correctly. My system logged me in my computer using the temporary profile

    original title: user profile

    . When in safe mode, I see all my apps, but in normal mode, it does not load properly.


    You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
    Mode has no default password (unless someone has changed the password so it should be available).

    Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
    has been known to cause this problem.

    Error message when you log on a Windows Vista-based or Windows 7 using computer a
    Temporary profile: "the user profile Service has no logon. Unable to load the user profile.

    How to fix error "the user profile Service has no logon. User profile cannot be loaded. »

    How to fix error "your user profile was not loaded correctly! You have been connected with a
    temporary profile. "in Vista



    How to enable or disable the real built-in Administrator account in Vista

    Use the Admin account hidden to lower your user account APPLY / OK then wear again to
    ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
    above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
    password (or two with the same password) use a test or difficulty to another.

    You can run the Admin account hidden from the prompt by if necessary.

    This tells you how to access the System Recovery Options and/or a Vista DVD

    If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
    always leave to an Admin who is not used except for testing and difficulty account).

    Difficulty of a corrupted user profile

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Driver does not load correctly

    Some time previously, I've updated my HP Officejet 6480 all in one software and since then, the drivers do not load correctly.  Whenever I start my computer I get an error while loading programs are.  It is said that a driver has not loaded correctly.  I am running Windows 7 home.  It may have started when I upgraded to Windows 7, 64-bit XP and loaded the new software from the HP website.  I don't remember exactly.  Today I tried to send a fax from the solution Center and found that the "Send a fax" button is irrelevant.  Since I am able to send faxes from the buttons on the front panel on the printrer, I guess that the driver does not properly is the fax driver.  All other functions work.  I uninstalled the software from the control panel in Windows 7 and downloaded and reinstalled the software several times without success to resolve this problem.  Any ideas how I can fix this problem?  Thank you.

    Hi Dave46a,

    Welcome to the HP Forums!

    I see that you have trouble to install your HP Officejet 6480 to your Windows 7 PC.

    I would try the following:

    1.) use Microsoft Fix It to uninstall the software. Select Windows, click on install or upgrade software or hardware, click on install or remove programs, and then click Run now next to correct problems that programs cannot be installed or uninstalled. (Use this to remove the printing software).

    2.) try using the printer HP install wizard for Windows for the re - install.

    (3.) to run the HP print and Scan Doctor to see if other errors occur.

    Hope this helps and have a nice day.

  • Yahoo mail does not load correctly

    Yahoo mail does not appear correctly. Does not add, or graphics. I uninstalled Firefox and reinstalled the latest version and it did not help. I started Firefox Add - ons disabled and this did not help. Yahoo email is the only site to be on. Gmail opens fine with Firefox and yahoo mail opens fine in Internet Explorer. It started tonight and nothing on my computer has been changed before you start.

    Nothing of what you have suggested will be / will work. I tried all your suggestions and much more, before you find what is the problem. Yahoo mail not properly opens with Firefox, if you try to open it with Yahoo messenger open. If anyone runs into this problem, close on yahoo Messenger and open your mail with Firefox alone.

Maybe you are looking for

  • Satellite Pro A300-1NT - errors in display driver that causes bluescreen

    Since I bought my laptop in 2009, I got errors in display driver that cause the PC to blue screen. This happens several times a week. Sometimes, it recovers on its own.I have not found a display driver later than in 2008 and have updated the latest v

  • My old pc crashed lost all contacts in Outlook Express

    My old pc that has Windows XP crashed and I lost all my contacts I had in Outlook Express. I use MS Hotmail now through my IP firmware-how can I enter in Outlook Express to retrieve my contacts. Help

  • Office has stopped working and was closed Spooler subsystem app stopped working

    I recently knew of theses errors that appear after windows vista starts, then a few minutes my computer laptop hungs up on top of me. I run the sfc/scannow, and I got some corrupted files. What should I do next? 2012 01-03 08:04:31, info CSI 00000101

  • Drive cleaner problems?

    I have a Sony Vaio laptop computer. I had a virus some time ago and think that I managed to get rid of it. However when I run Vaio care check-up, it shows that I have thousands of errors 'problems' with my disk cleaner (this happens even if I run the

  • Vista Home Premium can not find applications and networks.

    Vista Home Premium (manuf. installed) can not find applications (application to go to define associations in control panels?), does not recognize my wireless network and available restore points are only for dates after the problem has occurred.  If