My xbox work a none of the achievements

Similar Questions

• Windows 8 fingerprint reader no longer works (need to Flash the BIOS to fix)

  I have a DV6-7014nr bought around September of 2012.  I have upgraded to WIndows 8 when it first came out.  I had no problem with the reader of fingerprints on Windows 7, but do not use for a long time.

  As the subject says.  I can run it for a few weeks (on Windows 8), and the fingerprint reader stops working.  None of the biometric devices are listed in the Device Manager.  If I try to load the driver, it does nothing, as if the player is simply not there the responsibility of the driver closes just (with no message).

  Peripheral Biometirc in the Panel control says there is no biometric device found and simplepass opens without the fingerprint reader recognized.

  The only thing that solves this is my BIOS which comes Insyde to re-flashing. It is noted in the setup of the BIOS relating to biometric devices.  I have just discovred that BIOS update solves a problem because there was an update that I applied.  Have to reapply the update of the BIOS to fix this seems excessive to us.

  Added March 29, 2013:

  I just re-applied the BIOS two days ago and already the figerprint teader plug working again.  I tried a hard reset (because I saw that as a solution previously, and it is easier and faster to re-flashing the BIOS).  Who has shut down, remove the battery, now the power for 30 seconds button, boot the system without the battery.  He has not fixed the problem and I can't even understand why the fingerprint reader keeps disabling.  A re-BIOS flash solves the problem, it seems that the problem must be with the BIOS software.  Oh I also had turned off the "Allow windows to turn off the device to save power" for the biometric device before he went kaput.  It doesn't stop of is suckier.

  There must be a better way.

  Thank you

  Hello cjwh888,

  Try to restore your BIOS then use Recovery Manager to restore your software and drivers.

  Please let me know if it helps.

  Good luck!

• iPod stopped playing in the middle of a song. The screen still shows the song. None of the buttons work. Cannot close the iPod is facing down. How can I fix it?

  my iPod, the generation classic 32 GB, stopped playing in the middle of a song. The screen is stuck on this song. None of the buttons work.  I can't stop the iPod.  How can I fix it?

  Hi, lesliefromhowell!

  Thank you for reaching out by Apple Support communities. After reading your post, I understand that your iPod Classic does not. I count on my iPod for music on the go and want to make sure that you can use your own without problem!

  Relying on the buttons have not helped get the iPod to start playing or to restart, please follow the steps outlined in the article below to reset your iPod.

  Learn how to reset your iPod

  You'll want to use the instructions under the "iPod, iPod (scroll wheel), iPod (touch wheel), and iPod (dock connector)" section. These instructions are the following:

  iPod, iPod (scroll wheel), iPod (touch wheel), and iPod (dock connector)

  To reset your iPod, follow these steps:

  1. Slide the Hold switch to the locked position and then come back!
  2. Hold down Menu and Play/Pause all buttons until you see the logo Apple/iPod (about 6-8 seconds). You may need to repeat this step.

  If you can always reset your iPod, follow these steps:

  1. Connect your iPod to a power adapter and plug the adapter into a power outlet.
     You can also connect your iPod to your computer. Make sure that the computer is on and that it is not set to go to sleep.
  2. Try resetting your iPod again.

  Good listening!

• Of my horizontal scrollbar disappeared, and none of the published community solutions working - help?

  My scroll down bar (left-right) disappeared, and none of the solutions of the working community to bring it back. I tried the ' topic: Configure "approach, verified that I have the latest Firefox, tried the Safe Mode, rebooted several times, etc.

  Help would be very appreciated!

  Can you still see the search bar if you open this bar (Ctrl + F)?

  It is possible that the screen is too high and the bar scroll to fall down.

  You can check the problems caused by a corrupt localstore.rdf file.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• Firefox displays Fuzzy images (and none of the best-known work)

  I don't care

  • If I run Firefox in SafeMode (disabled plugins),
  • If I update my graphic drivers,
  • or if I disable Harware made under Advanced Options,

  Firefox continues to display blurry images.

  Here is a screenshot of comparison between Firefox (left) and opera (right) the same rendered image:
  http://imgur.com/7GksG7Z

  This has happened for a long time, even through several updates of Firefox. None of the solutions I found on the web (see list above) will correct this problem.

  The image blur is tiring for the eyes, not being able to see the images properly is so boring, and I hope someone can help me solve this problem.

  Change the behavior of the Firefox zoom so you can enlarge the text only, but not the images can lead to break the site layouts. If you want to take a look:

  View menu > Zoom > check Zoom text only

  (If you do not normally display the classic menu bar, press the Alt key to show it temporarily).

  Firefox 22 was the first to link your zoom level content of Firefox on your setting PPP for Windows. You can break the connection and set Firefox to use 100% resolution (the classic 96 dpi resolution) If you wish. Here's how:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the filter box, type or paste the pix and make a pause so that the list is filtered

  (3) double-click layout.css.devPixelsPerPx and change its value 1.0 for Firefox 21 size of fonts.

  Content will be returned to normal, but the toolbars may appear a bit smaller than your standard Windows for UI (100/105%). There is an extension to enlarge fonts in this area: police theme & size changer.

  Can you get it to work the way you want?

• I just recently upgraded to OS El Capitan.  Now, none of my movies to quicktime does not work.  I have the old version of Quick time 7 and it does not work either.  They do not convert.  Help?

  I just recently upgraded to OS El Capitan.  Now, none of my movies to quicktime does not work.  I have the old version of Quick time 7 and it does not work either.  They do not convert.  Help?

  VLC will play them?

  http://www.videolan.org/

• Portege M100 - none of the drivers work

  None of the Vista drivers work for Windows 7, so I switched to XP Professional and always SOME drivers don't work?

  Is there a special way to install after installing Windows?

  see you soon

  Hi ollie,.

  It would be interesting to know what you mean with none of the drivers work. You get an error message or what is exactly happening?

  Regarding the issue of Windows 7 I think that it of normal that Vista drivers do not work for Windows 7 because the Portege M100 is very old notebook, so I doubt that Windows 7 will work on this subject.

  Moreover, the Toshiba site, you will find an installation instructions document. Use this list a driver installation order is recommended.
  Check this box!

• Tecra A8 downgraded XP and none of the Toshiba Utilities works

  Hi all

  I just got a new Tecra A8 - it is downgraded to XP, and none of the Toshiba Utilities work (energy saving function keeys, keyboard shortcuts, etc.). When I try to reinstall - there is always an error message (missing dll or sth similar) - I tried to update the bios - couldn't - once again a missing file!

  any ideas how to solve this problem? at least the fn keys (fn key works - I see a light come on when I press - not the functions well!)

  your help, I much appreciated!

  see you soon,

  Dimitris

  Hi Dimitris

  May I ask you what Tecra A8?
  I visited the Toshiba driver page and it seems that Toshiba provide XP drivers for two different units A8 PTA83Eand PTA82E.

  You should be 100% sure that you are using the correct drivers!
  In addition, Toshiba released the Installation Instructions of the document on the page and to my knowledge it s necessary and important to follow this line of installation guide. The proper installation order is necessary!

  So take care and check again

• I want to cancel my subscription to Stan coming through iTunes to my Apple TV.  None of the instructions work.  Can someone give me another method?

  I want to cancel my subscription to Stan coming through iTunes to my Apple TV.  None of the instructions work.  Can someone give me another method?

  What do you mean by "presented guidelines? Here is a support article on how to manage subscriptions:

  View, change or cancel your subscription - Apple Support

  See you soon,.

  GB

• HP g72-260us: HP g72 stuck at the start, none of the function keys work how to fix this problem

  Laptop stuck in the market and none of the work of function keys that I tried to unplug the HARD drive and reboot but it remains always stuck in the HP screen and function keys still don't work. what I can do to solve this problem too I just got install a new HARD drive and the operating system. And the driver, it worked very well. then I stopped it and when I went to restart what happened please let me know what to do
  Thank you.

  The hard reset worked thanks for the help!

• In my regular email account, the only folder that works consistently is the Inbox. None of the Deleted Messages present in the folder.

  In my regular email account, the only folder that works consistently is the Inbox - new mail.  None of the shows in the Deleted Messages folder.  Or not junk e-mail.    The sent mail shows sometimes, but not always.  How can I get these files to work?

  original title: Windows Live account records

  You must mark it as no answers than these positions that solve your problem.  Since my post does not resolve your problem, please deselect as the answer.

  Windows Live Mail questions belong here: http://windowslivehelp.com/product.aspx?productid=15

• right shoulder button doesn't work is not on the gamepad xbox on pc XP

  Hello
  I have a joystick type xbox 360 connected to my pc and the right shoulder button does not work when you play Rainbow 6 Vegas 2.  Initially it would not work so I changed the ID & as recommended numbers on a forum, I visited. Now, all controls work except the right shoulder button. The file that I modified is shown below.  Any help much appreciated.
  concerning
  Pete

  [Joystick2]
  ProductName = gamepad Xbox HID minidriver
  VendorID = 5168
  ProductID = 63489
  Joy1 = XboxTypeS_A
  Joy2 = XboxTypeS_B
  Joy3 = XboxTypeS_X
  Joy4 = XboxTypeS_Y
  Joy5 = XboxTypeS_RightShoulder
  Joy6 = XboxTypeS_LeftShoulder
  Joy7 = XboxTypeS_Start
  Joy8 = XboxTypeS_Back
  Joy9 = XboxTypeS_LeftThumbstick
  Joy10 = XboxTypeS_RightThumbstick
  Joy11 =
  Joy12 =
  Joy13 =
  Joy14 =
  Joy15 =
  Joy16 =
  Axis_X = XboxTypeS_LeftX
  Axis_Y = XboxTypeS_LeftY
  Axis_Z = XboxTypeS_LeftTrigger
  Axis_Rotation_X = XboxTypeS_RightX
  Axis_Rotation_Y = XboxTypeS_RightY
  Axis_Rotation_Z = XboxTypeS_RightTrigger
  Slider_0 =
  Slider_1 =
  DPadUp = XboxTypeS_DPad_Up
  DPadDown = XboxTypeS_DPad_Down
  DPadLeft = XboxTypeS_DPad_Left
  DPadRight = XboxTypeS_DPad_Right

  Hello

  The question you have posted is related to the Xbox 360 controller.  Please visit the link below to find a community that will offer in support of your application.

  XBOX support:
  http://support.Xbox.com/en-us/Xbox-360/get-started/home?XR=shellnav

  Reference: http://support.Xbox.com/en-us/Xbox-360/accessories/controllers-remotes#1af1420135ff4637ab4f495f75a145b8

  Hope this information is useful.

• None of my restore points will not work. He directed the restoration of the system and that it recharges, but says system has not been restored.

  None of my restore points will not work. He directed the restoration of the system and that it recharges, but says system has not been restored.

  What is your system brand and model?

  What is your Version of XP and the Service Pack?
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)?  System Restore is not a time machine, but of course, this should work if you think you need.
  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.

  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.

  The scans by operating clean, reboot, test and we can fix any other issues

• How can I fix my DRM when none of the suggested fixs have worked?

  I'm currently under Vista Home Premium 32-bit pk2 service.  I tried to download audio books from my local library and got the DRM error.  So far, none of the suggested fixs have worked.

  Assuming that your problem has not been resolved (or your question has not been answered to your satisfaction), please uncheck my previous answer as the ANSWER and score than the other answers as RESPONSE unless & until your problems have been solved (or you decide to post in another forum instead). Please do it now, before you reply to this message, to avoid confusion. Thank you.
  

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Please respond to each of the following diagnostic questions in a numbered list type in your very next answer (no need to quote this post):

  1. when (date about) don't you buy the computer?

  2. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  3 a Norton or McAfee application ALREADY installed on the computer?

  4. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  5. what 'DRM Question' are you having?

  5b. what the "Media Windows Security Update" KB number you have installed or tried to install to solve this problem?

  6. ALL other updates following listed in view installed updates (not Update History) are they? [1]

  (a) KB2675157 and KB2653956;

  (b) KB2621440, KB2641653, KB2665364 & KB2647518;

  (c) KB2654428, KB2633874; KB2598479, KB2631813, KB2644615, KB2585542; KB2633171, KB2393802 and especially KB971029

  (d) KB2544521 or Windows Internet Explorer 9 ]<=TELL me="" which="">

  7. If Windows Vista Service Pack 2 (KB948465) is listed in view installed updates, when (the exact date) he was installed according to the history of the update (this time)? [2]

  8. what version of Java is installed?  TEST HERE-online http://java.com/en/download/installed.jsp

  9. is Firefox, Chrome or any other alternative browser installed?

  10. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; Advanced System Optimizer. TuneUp Utilities; WinMaximizer; WinSweeper; CCleaner)?

  11 have you ever done a repair installation or a clean installation of Vista for some reason any?

  ====================================================
  [1] start | Control Panel | Programs and features. See installed updates (in the left menu)

  [2] start | Control Panel | Windows Update | Update of the story (in the left menu)

• None of the work after defragmentation programs / windows update

  Hello

  I installed the windows updates and then defragmented my disc. problem is after I restarted windows (normal start-up), none of the installed programs work, and worse, it is im not able to install any new program, that is to say I can't run .exe files. even system restore option doent work (throws an error stating, there is no such program). now im not able to connect the task which resulted in .please help current situation (windows update or disk defragmentation)

  Kind regards

  Pramod

  Thanks for the reply, I solved the problem in any case. I used normal Defragmenter from Windows 7. but force expect registry corrupted due to this files.

  my system was empty without realizing any file assosiations.luckily that I had a backup of the old registry files, all I had to do was to run my backup.reg files after with c:windows / regedit.exe.

  now, the system works well.

  Thanks again