My Y510 is unable to connect with WiFi need to reset the modem, and sometimes both

Hello

My Y510 sometimes does not connect if my Wi - Fi if one of them started earlier then the other, I went to the media and automatic downloads to make the drivers and software upgrades through its tells me that all devices need update is no update. To connect to wireless internet, I restart my modem, and sometimes both.

You guys you suggest... Thank you

Advertisement

Check the site of the manufacturer of the modem for the firmware update if available.

start-up your computer, press f8 to load in SafeMode (networking) and try again, lets see the problem persists.

If the problem persists, uninstall the network drivers, restart your computer and install it again.

Tags: Lenovo Notebooks

Similar Questions

  • I am unable to connect to my router wirelessly to parents. I tried to reset the modem and the router and it still does not work.

    Presented labtop parents and can connect via ethernet, but still cannot connect to the wireless router. Ive rebooted both the modem and the router and ive also unplugged the power source. Help, please...

    original title: unable to connect to the wireless router?

    Hi Brandon,.

    What operating system do you use? (Windows 7, Vista, XP?)
    You receive any type of error message when you try to connect?
    What exactly happens when you try to connect?
    You receive an internet connection when you connect with an Ethernet cable?
    There are a few good troubleshooting in this thread. I suggest to look to see if it helps at all:
  • Unable to connect to wifi after factory reset

    This morning I had to do a factory reset on my Presario SR5214X. All came out of it works well, except that now I can't connect to wifi. The only options it gives me for internet connection are broadband and dial-up. WiFi was working fine before reset and I have installed the only network driver update available on the Web site, but it still does not seem to recognize any kind of wireless connection. The computer is a good 5 or 6 years, but it was working fine and all seemed well before. How can I update or install to get the computer to work again with wifi?

    Hello:

    There might be some brands that have this hardware ID, but it shouldn't matter.

    Try the driver for this model.

    http://www.Dlink.com/UK/en/support/product/DWL-G520-802-11g-wireless-LAN-PCI-card?revision=deu_revb

    You can automatically install the driver by running the configuration file once you unzip the download, or you can just install the driver manually by clicking on the ethernet controller in Device Manager. Click on the driver tab, click on set to update driver. Select the 'Browse my computer for the software' and look for the folder that you unzipped.

    Make sure that the include subfolders is selected and the driver should install.

    I don't know if the installer also installs the connection software (that I do not particularly like because I let Windows manage my network connections).

    Manually install the naked driver will prevent the installation of additional software.

    If for some reason that this driver doesn't work, then try one of this model.

    http://support.NETGEAR.com/product/WPN311

  • Unable to connect to Microsoft, impossible to reset the password.

    I forgot my password of the microsoft account - but when I use the "reset password" links I get this error "you cannot perform this task here, go to the website of the organization.

    I use a bigpond for my microsoft account email address - I can access my e-mail with my password (via the Web page of bigpond, but not via the new microsoft/old hotmail page) as well as my skydrive/dropbox etc - it's only on behalf of microsoft - extremely frustrating - someone else has this problem or have any ideas to fix it?
    See you soon

    Hi Nato'Keefe,.

    You can check out the link and also post your request here.
    http://Windows.Microsoft.com/en-us/Windows-Live/ID-support

    You must be connected to a Microsoft account to access the form.


    If you are unable to access your hotmail account, you can use another account (if you have one) or create a new one at https://signup.live.com.
     
     
    I hope this helps. If you have other Windows related issues, we would be happy to help you.
  • Unable to connect to Homegroup Windows 7 between the Modem to the PC and the Modem to the router for PC users.

    I want to talk about WIRED computers, do not speak of wireless.

    I have 3 PC:

    -2 are connected via Modem directly to the PC.

    -1 is connected through router, and the router is connected to the modem.

    The problem, this is it, it cannot detect the homegroup that I created on the computer that is directly connected by modem.

    The 2 PC via modem are perfectly detected and connected to the homegroup, so I want to know what I would do to another PC (which is connected to the router via modem) detects the homegroup, I had already created?

    Help, please.

    A Modem can have only two ports, connect to the internet (Wide Area Network) and the second to a SINGLE local device. In most cases the internet Service Pwill provide with only an IP address so itself cannot connect to more than one at a time. In current solutions, it is very rare for a Modem to use. If as you say, you have several devices connected to this unit then he himself is a router but possibly with the Modem built in if you have ADSL ISP.

    If your second unit is also a router then that explains why you cannot connect all devices in the same residential group.

    Router 1 has created a Local Area Network including both PC and the WAN port on the Router 2. Router 2 has created another independent local network with the 3rd PC. It is very likely that the two local networks will be IPv4 and traffic can be routed between them correctly in both directions according to the two local networks subnet ranges.

    Even if they are properly configured to allow traffic that HomeGroup requires IPv6 that some home routers support fully and every Member of the residential group must be on the same LAN anyway, he will not support a routed connection.

    Remove the 3rd PC of the 2nd router and plug it into the direct 1 router, remove the router 2nd the 1st in order to free the port. 3 all PCs are now on the same local network and communicate both IPv4 and IPv6, and homegroup should work.

    If you need additional ports provided by the 2nd router for other devices is not part of this problem then consider replacing it with a switch. If you use Router 2 for other devices Wi - Fi irrelevant then you need a wireless access Point.

  • VAIO SVE151G13W unable to connect to WIFI.

    VAIO SVE151G13W unable to connect to WIFI.

    All other PEDs connect, but not my laptop. All tracks to fix it please. Indication on the bar of legal status at the bottom is a yellow triangle with an exclamatory mark that says internet connections are available. But, I cannot open any page on the net.

    Hello ACM,.

    You can try to open the firewall settings and make sure that your browser is not blocked. You can also try reinstalling your browser or use an everything to a new fact to ensure like google chrome. It will be useful.

  • HP 15-ac152sa laptop: wifi tab disappears from the network settings menu. Unable to connect to wifi

    I bought a new laptop. I connected to the WiFi network with no problems the first time. I have downloaded Microsoft office 2016 (home and student). The next time I turned on the laptop, the icon WiFi in the corner of the screen says "no connection available.

    On the tab "network and internet". There is no tab for WiFi. Initially, I managed to fix it by clicking on the 'network card', 'properties' and on the 'power management' tab, I unchecked the box indicating "allow the computer to turn off this device to save power. This fixed the problem... until the next time I turned on the laptop. It's the same thing and I am unable to connect to internet via WiFi.

    The single adapter in the list here is "Realtek PCI-e FE family controller #2". Still unable to connect to WiFi... Still no WiFi tab under settings "network and internet". Help, please!

    So, the problem was finally solved (fingers crossed!).

    Yes, the Internet access worked perfectly every time when it is connected through the Ethernet cable. Ultimately I phoned the helpline. They checked for the new driver updates (these have been already updated), restored the BIOS remotely and then restored the device to the factory settings. Start of the fault still took place intermittently. This indicates a hardware problem, and the unit was sent for repair.

    The idea was that when the WiFi did not work, the WiFi card wasn't physically visiable in the list of available adapters, nor has the Bluetooth adapter. Apparently in this device, the Bluetooth and WiFi functions are on the same network adapter and apparently those elements should not disappear from the list of available adapters. So the fact that they disappeared together intermittently indicated a hardware problem with the card.

    Now that I got my laptop back and I think that the WiFicard has been replaced. Hoping all is well now and I hope this post helps someone else.

    Thanks hp for fast and wonderful customer service.

    Sarah

  • Unable to connect with iTunes Store

    Apple tv sends the message unable to connect with iTunes Store

    Are you sing the correct settings of the location and the region

  • Unable to connect with the PC tab

    I bought a Ubislate android 7 C + from Datawind, but unable to connect with the computer

    Burnersalvation,

    To provide the proper resolution, I would need more information on your side.

    1. which version of the operating system are you using?

    2. what happens when you try to connect to the tab?

    3. How do you connect tab to the computer?

    To connect to Android Ubislate to the computer, it may require some software to install on the computer provided by the manufacturer of the tab. Then I suggest you to contact the manufacturer of the tab to get help on this issue.

    Check out the link:

    http://www.ubislate.com/contact/index.html

    Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.

  • My HP Pavilion Entertainment PC will not communicate with my printer HP 309g. Suffice to say that they are connected to WIFI. I have tried wireless and connected.

    My HP Pavilion Entertainment PC will not communicate with my printer HP 309g.  Suffice to say that they are connected to WIFI.  I have tried wireless and connected.

    GR

    Since they are both HP products you the best solution is to talk to them...

    Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  • After traveling with my laptop, I am unable to connect with my connection wireless home

    After traveling with my laptop, I am unable to connect with my connection Wireless at home.  What I am doing wrong?

    Hello

    ·         What operating system do you use?

    ·         You are able to connect through wired network?

    .         You get the error message?

    Follow the steps in troubleshooting from the link and check if that helps:

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    If you use follow Windows XP KB article troubleshooting steps and check if it helps:

    How to troubleshoot wireless network connections in Windows XP

    http://support.Microsoft.com/kb/870702

    See also:

    Network connection problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

    Identify and resolve home network problems

    http://Windows.Microsoft.com/en-us/Windows7/identify-and-resolve-home-network-problems

  • Unable to connect to wifi compact Z5

    Hello world!

    I just bought a xperia z5 compact and just failed to connect to my wifi.

    I have no problem with wifi public such as freewifi. And I can connect with other phones to the wifi of my box.

    I also have the right password, name of the network etc...

    I tried to restart both the box and the phone. Tried the option repair. Endurance is disabled. Data too.

    I don't really know what to do.

    Please help someone.

    Thank you.

    Hi again!

    I'm sorry that it's really my fault if I couldn't connect to the internet. I'm stupid.

    Just had the wrong password for a reason any...

    In any case thank you to you both for you help!

    And sorry again :/

  • HP Pavilion Touchsmart 11 ED09AU - unable to connect to wifi

    Hello! I had problems with this laptop. I bought last month. After using it for a week, I noticed that it is not automatically connect to wifi, and sometimes it takes a little longer (probably an hour) so that it connects successfully to a wifi. And if ever he should be connected, internet access said "limited." I brought to a service center, they changed the wifi card, and then I guess that after using it for more than a week, the same problem occurred. This is a big drawback for me I hope that someone can help me, and I just want to know if anyone had experienced the same problem. Thank you very much!

    Hello Jabb050914,

    Welcome to the HP Forums!

    I understand that you are having problems with wireless connectivity. Can you please tell me the name of your new wireless card? You should be able to find this in the device under network adapters Manager. Also, can you me if other devices are wireless, or if this PC works with a wired connection to the router or modem?

    Here are a few things to try in waiting for your response:

    Powercycle the network:
    1. turn off your laptop.
    2. unplug the power to your router.
    3. disconnect the power to your modem.
    4. wait at least 45 seconds.
    5 reconnect the modem and wait for it to come back online.
    6 plug in the router and wait for it to come back online.
    7. turn on your laptop and test your connection.

    Reset the TCP/IP settings on your PC:
    1. go to your start screen and type CMD.
    2. right-click on the command prompt icon and select run as administrator at the bottom of your screen.
    3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
    4 restart your PC and test.

    It can also help to reset the winsock catalog:
    1. go to your start screen and type CMD.
    2. right-click on the command prompt icon and select run as administrator at the bottom of your screen.
    3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
    4 restart your PC and test.

    If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problem.

    Hope this helps!

  • Unable to connect with my sony DCR-HC48

    Original title:

    my windows 7 unable to connect with my sony DCR-HC48, please help

    my windows 7 unable to connect with my sony DCR-HC48, please help

    Hello

    1. Do you have any pop up when you plug the Sony DCR-HC48 to your computer?
    2. What happens when you connect the camcorder?

    We can refer to this link and check if that helps.

    Please come back with details so that we can help you better.

  • Unable to connect with the Mac computer?

    Unable to connect with the Mac computer?

    Please read https://forums.adobe.com/thread/1499014

    -try some steps such as changing browsers and disable your firewall

    -also clear the cache of your browser if you start with a fresh browser

    -Run "Difficulty Host File" option https://helpx.adobe.com/creative-cloud/kb/cc-cleaner-tool-installation-problems.html

    http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

    https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

    http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

Maybe you are looking for

  • HAVE synchronous, AO and DI - try again!

    Hello the LabVIEW community - I have to work on this problem of trying to get LabVIEW to measure the three channels of, out AO signal and measure the digital inputs on four lines all the time and frequency.  I can ge GOT it and AO tasks from the same

  • Live ID questions I forgot the password, can't reset it.

    I have a live e-mail account I created for me and my son XboxLIVEConditions tags player. I never use the e-mail account and set it up only because of the requirement of the xbox. As I put in place, I forgot the password, can't reset it, or get hotmai

  • Router is not connecting to the modem so I can't get internet

    All right-_ - I tried a lot of things with this so I get irritated sorry. Here is my info I have a Linksys Wireless Router with SpeedBoost Firmware Version 7.2 WRT54GS (latest version). I'm trying to use it with a Sprint 645 series Modem. My IP addre

  • Windows 7 try continually installing driver for similar devices

    My job requires me connect hundreds of devices usb on my computer one at a time.  Each peripheral is, for all the intentions, the exact device than the previous, but Windows 7 insists on installing the drivers as if everyone is different.  Devices, M

  • ask e-mail code and printer

    Hi all I need help for code request and my all-in-one Officejet Pro L7780 e-mail address printer.  My old printer doesn't have any icon on the control panel ePrint and there is no "Web Services" option in the Setup program. I'm trying to set up my pr