My Z5 dual display does not turn off automatically

Similar Questions

• Screen does not turn off automatically

  Hello

  I have problems with my display does not turn off automatically (for example, after 3 minutes of inactivity). What is happening is that the display actually goes to the maximum brightness, even if the screen indicates that the brightness is set to 0.

  Should which driver I update to solve this problem?

  Thank you

  Ok. I decided to uninstall AMD video drivers and reinstalled them. Now its working as it should.

  See you soon...

• Display does not turn off when attached to the ear during a call

  When you hold my iPhone 6 up to my ear during a call, the screen is not turn off and disable the buttons. The sensor is not broken, because the auto brightness works very well. It is just inside the calls when he won't work. Is there a setting to turn off the screen when you hold it to my ear?

  JBS - GUY says:

  When you hold my iPhone 6 up to my ear during a call, the screen is not turn off and disable the buttons. The sensor is not broken, because the auto brightness works very well. It is just inside the calls when he won't work. Is there a setting to turn off the screen when you hold it to my ear?

  The proximity sensor and ambient light sensor are two different things. The fact that your ambient light sensor works you says nothing about the functioning of your proximity sensor.

  You get a deal on the phone? A screen protector? If so, remove them and test again. If the screen does not always dark, you may have a hardware problem.

• How do I set up my screen so it does not turn off automatically?

  I sometimes pull up of recipes and read them the monitor that I Cook.  In this way I save ink and paper.

  The monitor automatically stops a lot too quickly.

  Change when the monitor turns off:

  How to:

  • Set your computer to go to sleep after a specified timeout period. For more information, see turn off a computer: frequently asked questions.

  • Adjust the brightness of your screen.

  • Choose when turning off the display during periods of inactivity.

  1. Open Power Options by clicking the Start button, click on the Control Panel, clicking system and security, and then clicking Power Options.

  2. According to the plan that you want to change, click on change plan settings.

  3. The parameters of change for the plan page, choose the display settings and the sleep that you want to use when your computer is running on battery (if applicable) and when it is plugged.

• Windows 7 starter edition: sceensaver not committed and does not turn off display

  I have Windows 7 starter on my Acer Aspire One.  The display has stopped turn off automatically (as it is supposed, by the power settings) when the computer has been sitting idle for some time.  I checked the power settings several times, as well as turned on the screen saver (but it won't commit).  I checked the display drivers & they are up to date.  I have not all connected devices that might wake the computer.  I have not installed new software recently and have any kind of function "awakening."   l normally play music by the bias of Windows Media Player or stream music online (Pandora and live365) when I fall asleep and so don't want to close the lid, but want the computer turns off the screen so that it would light up the room all night.  Please let know us what could go wrong.  Thank you!

  Hello

  Method 1: Run the troubleshooter of power

  You can run the troubleshooter of power to set your computer's power settings. The resolution of the problems of power check things as settings timeout of your computer, which determines how long the computer waits before turning off the display or enter the mode 'sleep'.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Method 2:

   

  Follow the post proposed by Serge D.

   

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/screen-saver-display-power-off-Don ' t-work-when/498b768d-c786-4741-81d4-28d6d189a88f

   

  Hope the above information is helpful.

   

• Satellite PRO U300 does not turn off

  Hello

  I am facing a problem for the last few days on my Satellite PRO U - 300 (31st PSU)...

  The machine does not turn off and the power light stays on (blue LED) even after you have disabled. In fact, happened 3 - 4 times when I start the computer normally by pressing the power button / stop, it does not start and I noticed that the indicator was not extinguished even after + shut down +. Like any it is blocked! I have to finally, remove and reinsert the battery to start the laptop.

  Some details of my pc are as under:

  Version of the OS Microsoft® Windows Vista Business 6.0.6001 Service Pack 1
  BIOS Version V2.00
  Processor Intel (r) Core (TM) 2 Duo CPU T7100 @ 1.80 GHz

  Can someone help me solve this problem. Is it possible that during the uninstallation of programs, any perticular driver file is also deleted?
  Thank you

  JITENDRA

  Hello

  I don't know that you understand the indicator of power, but to me it sounds like AC Power LED and this LED is always on when the laptop is connected to the power supply.

  Power on / off LED is probably what you mean (the other starting on the left).
  Anyway, you turn off your laptop using a standard on the Start button?
  Are you sure you want to use the Hibernate mode.

  Believe me, the entire description here is pretty confusing to me. It may be that the laptop is turned OFF but power light is still on.

  Have you installed something 4 days ago? Or deleted some important application?
  Sorry, but it is not easy to say with certainty what the problem is here.

• Pavilion 15-e020tx: does not turn off pc portable hp pavilion 15-e020tx

  Hello.
  I have a pc hp laptop pavilion 15-e020tx. It does not turn off and does not wake up mode 'sleep'...

  I tried to restore my laptop to factory setting, updated everything I can, but it still does not work
  Could someone help me please

  Update the BIOS to the current version. A F.24. The direct link to the download is below.

  http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69897.exe

• A Wi - Fi connection does not turn off correctly

  When I turn off Wi - Fi in the quick toggle or settings page it does not turn off and it is left running. (I have not 'analysis always' either) I can see in the graph of the battery when I turn it off for a while it always shows the green bar on Wi - Fi. I had this problem on 5.1 on my 4g (2013) g bike and I don't always.

  This seems to be a matter of google - I have it on non-Moto phones as well. The only thing to do is to restart with the Wifi turned off.

  I don't remember if disable the Wifi in the precision of the GPS solves this problem or not. I decided to live with it for now.

• My Apple Watch does not turn off.  When I go to turn off the slider isn't in the article to stop, I can restart but the cursor still does not appear

  My Apple Watch does not turn off.  When I go to turn off the slider isn't in the article to stop, I can restart but the cursor still does not appear

  Hello

  It is not possible to disable Apple Watch when its on the charger and connected to the power supply - this is normal.

• HP Pavilion 15 p150nh: laptop does not turn off completely

  Hello!

  I have a laptop HP Pavilion p150nh 15. It does not turn off. If I want to close it will turn off completely. I have black screen but the vens are still on and the buttons start led is also single beds. I've tried everything. Updates, hard reset I was looking for BIOS but nothing.
  Help me please!

  Hello

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• My computer it does not turn off when I go early and turn it off?

  My computer it does not turn off when I go early and turn it off? u can help me, please!

  Hello

  ·         What operating system do you use?

  ·         Did you do last changes made on your computer before the show?

  If you use Windows 7 or Windows vista, I suggest you to follow the steps in troubleshooting this article and check if that helps:

  You can't do a computer that runs Windows 7 stops or sleep

  http://support.Microsoft.com/kb/977307

  If you use Windows XP, see:

  You cannot log off, restart or shut down your Windows XP-based computer

  http://support.Microsoft.com/kb/831431

  See also:

  Turn off a computer: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/turn-off-a-computer-frequently-asked-questions

• HP 15 Notebook: Mute light does not turn off!

  Hey so been having this problem with my light on the button mute. It does not turn off. I checked to see if the volume works and it makes. Mute works but the light just stays on. Help!

  Hello

  Try the following.

  Download Realtek HD Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72968.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72183.exe

  When the reinstallation of Chipset is finished, stop the laptop.

  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, open your download folder, right click on the installer of Realtek and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

  Kind regards

  DP - K

• Custom flash drives still work in XP slows down the computer and does not turn off. No drive letter & tried all solutions online.occassionally ok

  When computer for a while and plug in flash drive usb does not recognize the drive, the computer slows down, does not turn off. Even with all the flash drives I have, ok when computer on just. I tried all the solutions online, nothing helps.

  Looks like you might have some performance issues with the computer rather that readers flash... but first of all, I would like to try to take the flash drives to a friends and ensure that they are working very well... If they are I would look at the performance of the computer and health controls. Heres a guide to improving the performance and general peacekeeping home

• just installed thinkpoint... now, the computer does not turn off

  Hello

  Downloaded thinkpoint... now the computer does not turn off

  never had this problem before.

  Hello

  Downloaded thinkpoint... now the computer does not turn off

  never had this problem before.

  ThinkPoint can be a virus, google for info also run superantispyware and av prog.

• Light (switch) on my screen does not turn off. I have to shut my computer down several times a day to turn off the monitor.

  Light (switch) on my screen does not turn off.  So, I shut down my computer and restart several times a day, because when I put it in mode 'sleep', he wakes to the top in a few minutes and will not fall asleep.  I could put a blanket on my screen when not in use, but I'd rather find a way to make it stay asleep when I tell him.

  Light (switch) had already done once before and I was so worried that once I turned off the monitor that I would never get it new on... a bit short of money here, to buy a new monitor, but the next day, I pressed the power button with an additional downward pressure and I could so he could start working again (able to turn the market monitor).  It was about 3 weeks ago.  Now, the light stays green, unless I stop the whole computer.

  Maybe my main problem is sleep mode, which removes the screen for like 2 minutes and then he wakes up to the top and is so rude when I myself and try to sleep, I just turn off the monitor everytime I put the computer to sleep.

  Now, I can't turn off the monitor, except by turning off the computer.

  Hi JDandGinger,

  I suggest you follow the provided article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-power-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  If the problem still persists contact the manufacturer of the monitor for more help and information.