My ZTE open C unable to connect to the wlan with 63-signs-hex key.

Similar Questions

• Satellite Pro M70: Unable to connect to the WLan with ConfigFree

  Salvation in the Forum.

  I have problems with a satellite Pro M70, about gaining control of wireless connections.

  When I scan with "The Radar" I have ConfigFree for available wireless accesspoints, I get several points available, but it is not able to connect to one of them. I can read their status and see their marker of WEP encryption.

  When I try to connect to one of them, I get a pop-up dialog, that said (translated from Danish) 'suppliers another software is in control of the wireless network card. When you try to configure a connection through the classic way to windows, windows States that "windows is not able to configure this wireless connection - if you have another program to manage wireless connections, you must use it". I guess it refers to ConfigFree...?

  Is the unnamed "other provider" associated Windows or perhaps associated McAfee (Security Suite 2007)?

  If you are familiar with this problem or something like that I'd be please to know.

  Also - where can I enter keys for WEP encryption for my friends in ConfigFree WLAN routers?

  > Trying to make a connection through the classic way to windows, windows States that "windows is not able to configure this wireless connection - if you have another program to manage wireless connections, you must use it". I guess it refers to ConfigFree...?

  It should not be a ConfigFree. According to you, an Intel ProSet utility or a Client Atheros wireless network adapter might be controls the Wlan configuration!

  Please check if one of the two control the WiFi network tools and turn off!

  > where can I enter keys for WEP encryption for my friends in ConfigFree WLAN routers

  You should have three different tabs in the utility Configfree.
  The second device settings provides the list of devices, and you should see the wireless network connection.
  Choose and use the button network connections.
  There you should find some encryption settings!

  Also check the profile settings tab and the option called security settings

• Unable to connect to the internet with other programs (like Zune) but internet explore still connects.

  I can connect to the internet with internet explore very well. No problems.  But when I try to connect another program to the internet, like Zune or Wildtangent games the program says that I'm not online.  I know that I'm online because I check to make sure you Internet explore, and which still works.  I already tried to change the firewall settings to allow programs through, but that did not work either

  Hi Chloe,.

  1. What is the exact error message?
  2. Since when are you facing this problem?

  However, try the following steps.

  Step 1: Add zune except for windows firewall.

  1. click on start toreduce this includes this image, type firewall.cpl in the Search box and press ENTER.

  2. click allow a program through Windows Firewall. Collapse this includes this image
  If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  3. click on add program.

  4. click on Browse.

  5 locate the Zune and then click Open.
  Note By default, the Zune is installed in the following location:
  C:\Program Files\Zune\

  6. click OK twice.

  Step 2: Windows live onecare

  1. Start Windows Live Onecare.
  2. Click change Onecare settings.
  3. Click the firewall tab.
  4. Click on Advanced settings.
  5. Scroll through the list of programs to determine if Zune appears in the list.

  ·         If Zune appears, make sure that the Zune is set to allow instead of block.

  ·         If Zune does not appear, follow these steps:

  1. click on Add.

  2. Locate the Zune and then click Open.

                  Note By default, the Zune is installed at the following location: C:\Program Files\Zune\

  3. click OK twice.

  http://support.Microsoft.com/kb/927980

  Try these steps and let us know the result.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Unable to connect to the server with ttisqlcs, failed to retrieve IP address of the system

  Please help me, I have installed timesten server and client on different machines in the LAN, but with the same user and group - ttadmin:ttgroup

  When I tried to connect to the server with ttisqlcs - connStr "DSN = sampleCS"

  The result gave me errors like below

  Connect "DSN is sampleCS ';.

  S1000: Unable to retrieve the IP address of the system. System error:-2

  The command failed.

  Fact.

  The related part in sys.ttconnect.ini is defined as below

  [192.168.0.206]

  Description = TimesTen Server

  Adresse_reseau = 192.168.0.206

  PORT_TCP = 53397

  And the sys.odbc.ini

  [ODBC data sources]

  sampleCS = TimesTen 11.2.2 Client Driver

  [sampleCS]

  TTC_SERVER = 192.168.0.206

  TTC_SERVER_DSN = nredb_ds

  That wants it mean by 'recovering intellectual '?

  He is trying to resolve IP by hostname even when I already gave him the ip address?

  Either way, I can ping 192.168.0.206 and telnet to port 53397 without problem.

  Please help me, thanks ~

  It does not matter that they are VMs (I use between virtual machines all the time), but "Networking" of VM, of course, must be set up correctly. But if you can ping and telnet between VMS so that shouldn't be a problem.

  On the client computer, you have an entry in/etc/hosts for the client machines and the server? Even on the server? Please check that and add entries if they are not there and see if it helps. If not then we need to find the client using 'strace' to see which system call fails. Please try and after the release (or at least the last part that leads to failure).

  Thank you

  Chris

• Unable to connect to the internet with Foxfire. Can do with Internet Exporer

  I've been using Foxfire. After an update I can no longer connect to the internet with Foxfire. IE can connect.

  Firefox is the name. Foxfire is a bio-luminescent fungus.
  
  http://en.Wikipedia.org/wiki/Foxfire _ (bioluminescence)

  See this support article - difficulty of problems connecting to websites after Firefox update

• Satellite A500 - 15 M: unable to connect to the TV with HDMI

  Hello

  I have a Satellite A500 - 15M. I recently tried to connect to my TV so I could watch certain shows online on my Hannspree Xv HD ready TV.
  The HDMI out does any record on the TV - the TV displays a message "not supported" and remains off (as if there is no signal) - display settings on the PC it does not recognize the TV... actually it [Intel Graphics and Media Control Panel] indicates that the TV/monitor settings are not supported.

  But I can connect via the VGA output - although I have to delete the display settings to 1024 x 768 to show on TV. In addition the display on the TV then is mainly pink and red, even if my pc display peak is most often blue. -start of the Toshiba screen displays on the TV, without any problems and one or twice the login screen was displayed too much, but then sometimes it isn't...
  I know that's not the VGA cable as I can connect to the TV with it on netbook advent my wife without any problem.
  Are there drivers, I need to update / download? Or I need to change the settings?
  How can I get my screen on my TV?

  Any help would be greatly appreciated. Thank you

  Hello

  First, you must connect the two machines (laptop and TV via HDMI) when the two devices are turned off. After turn on the TV and the laptop.

  You must choose the HDMI on TV channel and should then use the FN + F5 key combination to switch the video output to the TV.

  If this does not help, try updating the graphics card driver.
  It seems that your laptop supports the Intel graphics chip. Therefore, you can see the Intel page for new drivers.

  Welcome them

• Why my ZTE open c Firefox OS Smartphone forget the wlan settings and does not sound the alarm?

  Sometimes it is even enough to go outside the trash to let my smartphone to forget the settings for the wireless LAN. When I come back, I have to re-enter my wlan router - not so short - code. Once the internet connection is running as it should.

  In addition, the alarm does not work, I can adjust alarms as I like, set the volume to maximum and also activate the vibrator but does nothing when the time arrived, even when the alarm appears on the screen all the time. Is my broken phone? Or is this a bug in the installation of Firefox OS?

  Where Firefox OS does not store these values for wlan connection and waking hours? Is there an internal database that may be corrupt?

  Hi Markus,.

  I understand that you are having problems with the Wi - Fi connection and the awakening of your phone ZTE C open.

  The problem of awakening seems to be similar to what has been reported by other users and is followed on bug 1052245.

  You have more information about wake-up issues that you are experiencing? This can be very useful to our engineering team is studying. Please be aware that the ZTE is the manufacturer of your device, and only they are able to release an update.

  The wifi problem can be linked to the bug 923324.

  Please reply to this message with the following information:

  • What is the OS version and Build ID found on the device information page? Please visit this link if you need help to find the ID for your phone.
  • Please provide the exact steps to reproduce the problem you are experiencing.
  • How many times you experience this problem?

  Please be sure to include as much detail as possible, including all Web sites who may have this issue and the error messages that you may receive, exactly as they appear. This will ensure that we have all the information needed to investigate this problem.

  -Ralph

• Tecra A11 - 17V unable to connect to the WLan

  I have a Tecra A11 - 17V 15.6-inch and the problemis that i can´t get conection WiFi at home.
  With all of the other devices I come in my WLAN and the Tecra also in others, but not in mine.

  It is a WPA2-PSK AES and 128-bit encryption.

  This may be the cause?
  Best regards

  The wifi connetion couldn't work for different reasons.
  That is to say the Wlan standard could not be supported, or there might be a problem with the compatibility of encryption.

  You can perform a simple check.
  Disable the wireless encryption in your router settings and try to connect to the laptop to open Wlan (unsecured).

  Of course, this should be done just for testing purposes and the Wlan must be always well attached.

• Satellite C665D is unable to connect to the WLan

  Hello

  My in-laws are staying with me and their C665D does not connect to our wifi network.
  I can't turn on the wifi settings.

  I looked in to network adapters Device Manager and there is no present. I tried to add a new device through "manage wireless networks" and he says "Wireless is not currently enabled.

  If I try to manually add a wireless network it comes up with 'windows wireless service does not work.

  Look forward to some help on this one

  The error "the windows wireless service does not work" indicates that the Wlan service has not been started.
  Why? I don't know, but you can try to activate this service first.

  To manually start the wireless service, i.e. the WLAN AutoConfig service, perform the following steps:

  1. connect to the computer as an administrator.
  2. Click Start, type services.msc and press to enter.
  3. Locate the autoconfiguration WLAN service, double-click to open its properties window.
  4. on the general tab, change the startup type to automatic and click on the Start button.
  5. click on apply, then ok.

  Then try to connect to the wireless connection and check the result.

• Satellite A500 - 03P: unable to connect to the WLan using Win 7 + event message

  Hi all

  I recently bought the Satellite A500 with the offer included Windows7 while he was available late October 09.

  So I had the Toshibe DVD for the upgrade and followed the steps and Visa home premium upgrade to Windows 7. Now I have two questions.

  (1) I get a system event Notification after start, talk to me about the system event log. The full message is below.

  Unable to connect to a windows service
  Windows could not connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service failed

  (2) I was able to use this laptop for the internet before the upgrade, both via a USB wireless drive as well to the office via a DSL modem.
  Now I can't access the internet after the upgarde of Windows 7!

  For example the Optus dial-up box pop up appears commandeLorsque I click on 'connect', it does not connect.

  Can anyone help please?

  Thank you
  C I

  Hey Buddy,

  (1) did you check the Configuration of the Service for this service? The Boot System Event Notification Service type must always be set to automatic. This service is absolutely necessary for Windows and shouldn't t be disabled or set to manual startup type.
  Check it!

  (2) to be honest I never heard on the internet BEFORE, but normally, it should also be possible to access the Internet with Windows 7.
  Make sure that the WLAN or LAN card is installed properly and check the TCP/IP settings. If you are missing some driver you can get on the page of Toshiba.

• Unable to connect to the internet with the NETWORK card and Windows Millennium Edition.

  Hello

  I turned on my old computer yesterday, who has installed Windows Millennium Edition. At the back of the computer is an Ethernet port which is marked as LIEN ACT. The NIC with this port is Realtek 8139 PCI Fast Internet Adapter. I spend two hours on the Internet configuration and I did and finally got connected, but then, a few hours after, something went wrong and the Internet and the NETWORK card has stopped working! And the card has disappeared from the Device Manager, but he's still showing in network in Control Panel. I opened the computer and I reconnected it to the slot, but it did not help. At the back of the computer next to this port are two LEDs - green indicates the power that lights up when I plug the Internet cable and the other orange indicates actual connection. But now these two LEDs are not indicating something even when I plugged in the cable to the Internet, which comes from my router. In the computer a Dial Up connection PCI is installed too, but I disabled it. I used Dial-Up in 2002. So, I need help.
  But I know that I can connect with this Ethernet card to the Internet because it worked for 3 hours, I've loaded the pages and downloaded programs.
  Please don't point, should I upgrade Windows!
  Thank you.

  Hi friend,
  You can try a Bing search on connectivity to Win ME, I don't know there are still a few old sites that are not taken down you will find a few FAQ on.
  I saw not a ME machine in too many years to count!
  Good luck on your adventure.
  B Eddie

• Unable to connect to the internet with the new installation of XP Service Pack 2

  Hello.  I have an old laptop (Dell Latitude D630) that I recently reinstalled Windows XP, service pack 2.  I logged directly into my Fios modem because I can not find how to connect wireless.  When I open Internet Explorer it says that cannot display the page.

  I went to tools, Internet Options, connections and Lan settings.  There automatically detect the settings checked and that's it.  When I try to tools, Internet Options, connections and the installation program, it seems to want to set up a dial-up access.  When I go to control panel and click on network connections, it shows a 1394 connection that is connected and a firewall.  By clicking on status shows connected to 400 Mbps.  I tried to repair the connection, just in case, and it is said that he could not finish because he could not question the connection TCP/IP settings.

  Did anyone know what I can do to connect to the internet, so I can run Windows Update?

  Thank you.

  In addition to advice Xircal you need sp3, the first thing you need to do is to install the drivers for your hardware.  If what you see in network connections is an icon for an IEEE 1394 (FireWare) connection, you must at least install drivers for your Ethernet network cards and wifi.

  With the help of a computer that can connect to the Internet (for example, the one you use to post here), go to http://www.dell.com/support/my-support/us/en/555?c=us&s=biz&cs=70&l=en and enter the serial number for the laptop.   Download drivers for your Dell D630, copy to a USB flash drive (or burn to a CD) and install as shown here--> http://www.dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=gen&docid=268873

• Unable to connect to the router with windows 7?

  I have just bought an Acer Revo R3700 and installed Windows 7 above, but I can't connect to my router.

  My router is heaven and successfully has 4 laptops (both under Vista, two 7 running), an Xbox and a Wii and two smartphones connected to him. Yet I just can't do this system to connect to him.

  I'm at my wits end... I've tried absolutely everything. I searched the Microsoft answers site found several similar problems and tried a lot of solutions, including adding files in the registry and update drivers.

  At first I could connect to the internet every now and then, but it was biblically slow (I tried to download Google Chrome and got him to 0.2 Kbps) and soon disconnected. Now I can't connect at all.

  I just downloaded a the Ethernet controller driver and updated a driver WLAN as they apparently do not come with Windows, but it still doesn't work. Although the message has now changed to "Unable to connect" to "Limited connectivity" (even though I think it's more coincidence than anything else)

  It should not be a question of signal strength, like the Xbox and laptop computers work fine when placed next to her.

  Really needed a solution to what running an ethernet cable is not really an option :(

  Thanks in advance guys. I'll be happy to provide any additional details if you need it :-)

  EDIT: / / I would add that I seem to be able to connect fine with a phone as a hotspot? It is very very weird.

  EDIT: / / I just managed to connect, but its very slow and not changed anything for the last 100 times? Everything seems to be completely random when it let me? : S

  Hardware support comes equipment - including the drivers/software manufacturers to use such software in all operating systems.

  Looks like a possibly faulty hardware or shotty (the wireless network device.  Make and model)?

• Unable to connect to the Mac with edge 10.8.4 inspect

  I edge inspect CC installed on my computer, chrome and on my iPHone.  I am connected to inspect according to the icon in the menu bar. My phone can see my computer but cannot connect using the IP address. However, the Chrome Extension "Please start Edge inspect" and I do not see the Edge icon in the Dock.  So I think that the thing is not activate... I think I have the last CC install, but I see not a way to uninstall the app manager and the resinstall...

  BTW, I do not know how or what type of port to open or find out if access is available on the airport. I'm on a LAN. The computer is connected by ethernet to the router, the phone is connected via WiFi to the network, and I turned to NetBarrier...

  I'm glad it helped!

  Where you need performance you can get using the default weinre server, you can run locally and set up the extension edge inspect using the local server.

  Please follow this doc: http://forums.adobe.com/docs/DOC-2623

  Also, as far as I know if you have installed the stable version of Chrome it updates only the major and non-beta versions. Who will check and let you know.

• Unable to connect to the administration with FMS4 on Amazon EC2 console

  I can start an instance of Flash Media Server 4 on Amazon EC2, using the public FRIEND of Adobe, and I am able to view the vod and live samples of media with no problems.

  I can't SSH into the running instance, and I also bring to the top of the web page Admin Console for this instance in a browser. However I was not able to connect to the administration Console.

  Before you try to connect to the administration Console, I modified /opt/adobe/fms/conf/fms.ini insert a username and password, and then I saved the modified file.

  I've also updated my security group to add a custom TCP rule for open port 1111.

  On the login page Admin Console fields, I kept the name of default server 1 server.

  For the address of the server, I tried both localhost and also address public DNS my EC2 instance.

  I used the username and password I put in fms.ini.

  But I still can't connect to the administration Console.

  Help, please!

  [I looked at old point http://forums.adobe.com/thread/678832 , related to this topic, but that has not helped to solve the problem.]

  By default: Admin Server is not running on the EC2 instance. You must manually start after you have added the user name and password in fms.ini. I see that you have entered the user name and password - but I suppose you couldn't start Admin Server and therefore, you are not able to connect. Do step to start admin server on EC2 instance below

  PuTTY session you EC2 instance

  Go to/opt/adobe/fms

  Run the terminal command >. / fmsmgr adminserver start

  To make sure you please run: ps f | grep fmsadmin - this will let you know if admin process is running or not