MyCD Rom does not work help!
In Device Manager it sayes windows cannot load device for theis hardware drivers. The driver may be corrupted or missing. (code39) I uninstalled and unplugged the computer and when I plugged it back in and turned on it says please consult the manufacturer of your device to help get this device installed I have no ideal what I do to help someone! I did everything I know!
Hello
Please make all below even if you have done some before as it is often the set of operations which solves
the question.
Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml
Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems
Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
--------------------------------------------------------------
Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
are you can reinstall the 'old'. Many use Windows default drivers however some special aura
ones. Also check the website of the manufacturer of the car.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm
Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Tags: Windows
Similar Questions
-
My CD-ROM/DVD-ROM does not work
My CD-ROM/DVD-ROM does not work. Manager of devices display a "!" on the Optiarc DVD RW AD - 756 A ATA DEVICE.
1 device state poster (this device cannot start. (code 10)).
2 update driver... shows that the best device driver software is already installed.
3. it is the driver of manufacturing.
4. I tried the microsoft fix it downloads and it has not solved the problem.Hope that enough information... Oh, my computer is computer laptop HP Pavilion G60-231Wm.
Grateful for any advice...
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Satellite A30 - CD-ROM does not work correctly
My CD ROM is not working properly because the drivers corrupt. I tried uninstalling etc. How to load new drivers or even reformat from the recovery disk when the CD-ROM drive does not work?
Looks like catch 22. Someone at - it help him?
I agree with Maurice. If the drive can read a recovery media or any other bootable media there must be a hardware problem and I assume that the optical disk drive is defective.
-
HP pavilion dv9925nr sound does not work help please
Hi I have a hp pavilion dv9925nr laptop and I spent in Windows XP pro and now the sound does not work and iv tried everything iv downloaded all the drivers on the internet and everyone simply goes on to say: no driver no has been supported in this package and its driving me crazy please can someone help before I just use it to target paratactic
Hello:
Then I recommend that you follow the instructions in the guide to the link I posted above.
After you install the MS UAA driver, you may need to install the audio driver updated the posted on this link:
Conexant High Definition SmartAudio 221 drivers (ModelC700, Vx5xx series and dvx5xx and ABOVE )
Pilot modded by silver here
Unzip it to a folder... Use the device, right click "Audio Device on HD" Manager, choose Update driver,
Not to connect, install from a list or specific location,
Select don't search, I will choose the driver to install.
For the hardware Type select 'show all devices '.
Remove control "Show compatible hardware" and click on 'disk '.
Next... Navigate to the unzipped folder and choose the "WiSVHe5.inf".
Ignore XP when he complains, Reboot.If none of this works, try to reinstall XP and start from scratch. If you do not see your appliance an audio controller if you reinstall XP, then more than likely it is a hardware failure of the audio chip.
Paul
-
It won't read a DVD. It will not read ANY CD or DVD. I tried 12 different CD/DVD. This isn't an upgrade to Vista; the computer came "made for Vista" with Vista installed on it. I had added Nero. I removed Nero. I did all the updates. I have not released the driver and reinstalled. He claims to have the latest driver software, but it won't work. The computer can see the CD/DVD, but he calls it a 'CDROM '. It is not the case. It is a DVD/Cd-RW with Labelflash.
I did everything suggested that past discussions. I ran FIXIT program that claims that the drive works properly. It is not the case.
I tried to get various programs to recognize. They cannot see the installed media.
I uninstalled iTunes.
Please do not give me the answer of cut-and - paste stock; It does not work.
Please tell me what to do to make Vista see the media inserted in the CD/DVD-RW drive.
Thank you.
Hello
Well, if you have tried all the usual bugs try this:
Make a Restore Point:
How to create a Vista System Restore Point
http://www.Vistax64.com/tutorials/76332-system-restore-point-create.htmlHow to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
------------------------------------------------Then go to right click on UNINSTALL - - CD/DVD - Device Manager CHECK THE DRIVERS to REMOVE and
continue.Reset.
Occasionally, install an upgrade or a re - install will fix the problem and of course the drive or other hardware issues
could be at stake.=====================================
Here's the answer, just in case there is something you don't have, and I start up and down.
Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable
or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===========================================
You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.You can use another DVD that are not protected but you will need to copy you have the product key.
On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmIf nothing works, you can make a repair facility that must save the data but you will need to
Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
need to know your product Code.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.htmlI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
My application get Windows 10 does not work HELP Please
1 - my get app Windows 10 does not work. Whenever I try to run your PC compatibility check it says:
The report is not available now, you can always book your upgrade when it's time to start the upgrade we will run another report to make sure that your PC works with Windows 10
2. when I click on view Confirmation it Says:
YOUR UPGRADE IS RESERVED
There is nothing you need to do now, you will receive a notification on your PC when windows 10 is ready to install.
and it been like this for 4 weeks and nothing happened what should I do to check if the applications on windows 7 runs on windows 10 or not and start the upgrade to windows 10
Please help thanks
Download the media creation tool
Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.
Note: How to check if you are downloaded or installed the update Windows 10 November
How to create an ISO or USB drive.
Select upgrade this PC now and then click Next
or
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to back up and restore your files manually
- How to free up disk space in Windows
- How to: 10 tips before installing Windows 10
- How to: determine if a device application or hardware is compatible with Windows 10
- Will remain the documents and applications, or install app must
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
-
Qosmio G20-117: bad pixels on the screen and the CD rom does not work
Hello
I have a problem with the computer hardware. I got a Qosmio G20-117 and you have a problem with the cdrom and the screen. Got bad pixels on the screen, and cdrom does not work. I live in the United Kingdom, so I tried signing up to them to choose the computer before the computer is out of warranty.
Whenever I register, it says sorry, an unexpected error has occurred, please try again later. I have tried at least 20 times since yesterday and it doesn't seem to work. I have them even called and they told me, the service is stopped and will be fixed this morning but yet nothing works.
Any solution?
Hello
If you want to contact Toshiba service partner in your country then why you don't call them?
Toshiba page you will find the database with all service providers in the world.
http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=trueI don't think that you need to register something apart from the serial number of your laptop. But in my opinion this could also be done at the point of service.
-
I downloaded vista of a school site web does not work help
I used a MSDNAA web site / product: Windows Vista Business DVD e - bigship.com / / is not working help
Contact the school where you have Vista of for all the problems.
See you soon. Mick Murphy - Microsoft partner
-
PRINTER DOES NOT WORK HELP!
I just upgraded to windows 7 and my HP712c does not work anyone know why? It worked fine with VISTA!
Because Win 7 does not support this printer. Time for a new printer, I'm sorry.
-
Selecting F1 when in Vista, by selecting the office or the latest versions of Word and Excel, does not result in a HELP window that appears. No notable effect takes place. Documentation of the user for all these products States that the F1 is equivalent to selecting HELP in another icon, such as '? I'm assuming that the cause is somewhere in the o/s, so I select the Windows Vista Forum.
What I can do to activate this function F! = HELP?Do a little cleaning and I came across this old question. Later, I found that when I watered them my extra keyboard (external?) with iced tea that killed all the function keys. When I replaced this keyboard all the function keys reworked.
I used to work in support of the customer. We have learned, after a while, when someone called to say that something did not work the first question to ask is "is it plugged in? I guess that the second question is ' "how long since you spilled tea on it?". »
-
In Application EPPM P6 p6 page does not work Help
Hi guys,.
We have configured the P6 EPPM application successfully.
The p6 EPPM application is currently running.
Our requirement is in the right corner P6 request to help link p6help page is needed.
For this, we have manually deployed the p6help.war file in Weblogic server and performances of the 'ACTIVE' State in the tab control and tab its the default url watch testing:http://hostname:8203 / p6help
But when we try to access this url, we get the error below we also tried with below url toohttp://hostname:8203/p6help/help
403 - forbidden error
Of RFC 2068 Hypertext Transfer Protocol - HTTP/1.1:
10.4.4 403 Forbidden
The server understood the request, but refuses to fill. Authorization will not help and the request SHOULD NOT be repeated. If the request method was not HEAD and the server wishes to make public why the request has not been met, it SHOULD describe the reason for the refusal in the entity. This status code is commonly used when the server does not want to reveal exactly the reason why the request was refused, or when no other response is applicable.
Can you please suggest solve us this problem.
Concerning
Flo
Hi Alex,
We have worked on this issue and solved the problem at the moment,
Currently, we are able to access the help of p6 tab page P6 EEPM Application Help.
Solution that we have done is,
In the application of P6 EPPM Admin in the corresponding configuration in P6 help url, we changed the url from http://hostname:8203/p6help/help to http://hostname:8203/p6help/and we have restarted the P6 server in weblogic console.
So right now, we could access the p6 help page in the help tab EPPM Application 8.3
Concerning
Flo
-
Satellite U200: DVD - ROM does not work correctly
DVD - ROM not working. After the fire of two optical drive DVD - RW, loss of ability to burn and can read only CD with difficulties of the sum. It is not possible to recovery operating system.
Look like lost laser precise positioning device and can no longer read high-density data on DVD, but on the sum of CD singing can be found with difficulty.
Your description sounds like a reader lens problem.
Probably the lens can not calibrate in the right position, and that's why the drive can't handle DVD media.Bad news buddy this problem is not repairable with updates. Above all it s a hardware problem and the drive should be replaced!
I would recommend contact the ASP which is responsible for you country to organise a replacement.
Good bye
-
my account has been hacked had backit is Arabic, I tried to translate does not work help
Unfortunately my account has been hacked. I have it back now, but it of in the translation of Arabic.Tried, but does not not for the entire site. Please can you help.
Unfortunately my account has been hacked. I have it back now, but it of in the translation of Arabic.Tried, but does not not for the entire site. Please can you help.
You did not bother to tell which e-mail program you use. Maybe one of them?
View all Windows Live and Hotmail questions in the appropriate forum found here:
http://windowslivehelp.com/ -
E280 dropped... now it does not work - HELP!
I dropped my e280 and now it does not start. Here's the thing... I can always connect to my PC and can still transfer music, playlists and so on. I have a car charger, and when it is connected, I can listen to the music and see the songs, etc.. The problem is if it is not connected to anything it does not illuminate. I had plugged to the PC for 4 hours and looks like it is still loading the battery. So... any advice on what I should do to get this thing working again? I was going to communicate directly with SanDisk, but thought I would try here firsrt. Thank you!!
Tim
Maybe you hit the loose battery when you dropped it. Open the back (four small screws), remove the battery and put it again firmly.
-
My button blackBerry smartphones 'About' does not work HELP
Hello fellow BB owners ive been tweaking and updating my new 8330 and it appears that now my about button does not respond. All other menus and sites work fine, but when I click on the subject of button it does not.
Thanks in advance
Jason
Jason, have you recently updated your device to the 4.5 OS, and in this process did remove voice activated dialing features? If you did, which also disables the Options > on screen and probably explained in the upgrade process you have used.
Solution: on the home screen, press on and hold the ALT key while typing E A C E
or
Press ALT + rightSHIFT + H at the same time.
Maybe you are looking for
-
Buy drive recovery for Satellite P500?
Old ladies gave me his laptop to fix his HARD drive make a lot of noise to clang/click and can not be read so that I can t use the system recovery partition.Y at - it a disc image system - default factory that I could purchase to load; any return on
-
My Windows XP T5026 crashed. Had to reformat and partition and reinstall a Retail Version of Windows XP. Now other devices in the device Mgmt shows ethernet PCI VEN_8086 & dev_1064 & subsys PCI\ven8086 dev 2668 & subsys PCI Simple Communications PC
-
Lost the ability to copy files from one disk to another?
My setup is a drive C and D inside the Tower, then a MyPassport external USB for weekly backups of player and a MyBook to USB 2 external rarely used to store large files. Everything is defragmented, at least 20% free space on each disk and ran checkd
-
My cursor is moved to the left of the screen, then a drop down window opens to display an element of right mouse drop-down window. It is intermittent in the duration and doen not always happen. I've performed on a toshiba portege 3505 with addition o
-
Can I set a default setting for sharing & security?
Can I configure my pc to always let share this folder on the network and also alwaysallow network users to change my files? I would like this to be the default, as I use 2 PC and I have a program that allows you to synchronize folders of my Docs on m