mydaq no supported devices

Similar Questions

• Dell Streak says is not compatible, but the supported devices list says it's.

  The Dell Streak 5 (AT & T) is running Android 2.2 and has a Qualcomm Snapdragon (QSD 8250) which is supposedly Arm7. It is listed in the list of supported devices. However, when I go to the game store, it says that my device is not compatible with firefox mobile. Anyone know why would he lie to me?

  He should fix it momentarily. The 5 "Dell Streak has been accidentally blocked, but now was not blocked. It may take several minutes for the store update. Sorry for the inconvenience!

• What is the audio driver support device conexant high definition

  What is the audio driver support device conexant high-definition?  When I try to install the driver, I get a message saying that the installation has failed not found media device.

  Since you are not the original author (which never came back after his original post in April), if you have a similar problem, then the answer is similar: reinstall your drivers.

  http://welcome.HP.com/country/us/en/support_task.html

  MS - MVP - Elephant Boy computers - don't panic!

• U2713H (no HM)... other calibration supported devices?

  So I just heard on the new U2713H and the calibration of built-in materials. I'm interested, but troubled by the fact that the documentation seems to suggest that the calibration only supported device is the Pro i1Display.

  That sounds confusing... anyone who is this serious about managing the colors probably has at least a ColorMunki, otherwise a full-on i1Pro or i1Pro2. (I own an i1Pro and have no interest to shell out another $ 250 for an i1DisplayPro)

  Samsung has a monitor (B 27, 970) with similar internal calibration that supports all of these features and more. I was wondering if anyone knows if one of these devices are supported by the U2713H, or if it is only limited to the i1DisplayPro. because that stinks if it is, and there is nothing to recommend this on the U2711.

  Someone has some solid information in this respect?

  -Greg

  gmikol,

  Pro colorimeter X-Rite i1Display calibration only works with i1Display Pro. It was a design choice made by X-Rite, not Dell. They have no intention of allowing the other sensors because it has no sense of the business for them.

• No supported device has been detected

  I have the first elements 14 running on Windows 10 PC.  I have a Canon Vixia HV30 connected via Firewire, which recognizes the operating system.   I had problems to download videos of this unit with 11 elements not, but I do not get one "no supported device found" when you use the video importer now that I updated to 14 items.

  FireWire support has been removed in version 13 and on.

  You can read more details and one had alternative suggested here:

  https://helpx.Adobe.com/premiere-elements/KB/removed-features-formats-elements.html

• Installation of up4 on up3 "Unable to find supported device..." »

  I'm getting high grade to up4 build 153875 of 143149 using the drive working even, but it fails with the error message "Unable to find supported device..." ».  The old version of ESXi works very well on the disc.  I can load on the drive.  Any ideas on how this can be resolved.

  Thank you

  Have you tried that? http://www.vm-help.com/esx/esx3i/no_persistent_storage_after_upgrade.php.

• DETECT HDCP content encrypted or non - HDCP supporting devices

  I want to detect non HDCP support devices and warn users that it is not supported and move to a lower quality stream (non-HDCP).

  Is there a way of in OSMF to detect if the content was encrypted with output Protection, and can you detect what level of protection has been added (NO_PROTECTION, NO_PLAYBACK, etc.)?

  Found the answer to this question:

  To load the metadata and listening to DRM errors via the drmManager, you can detect what types of content HDCP can be played correctly on the device of users.

• Acquisition of data not found no supported devices

  Hello everyone!

  I'm new to Labview, and I make a tutorial learn step by step. I have nothing plugged with the PC.   I have to do this exercise. EX1.

  When I set the properties of the DAQ Assistant (Signal gain > analog input > Voltaje) the message "no device supported found" appears.  I looked on the automation of measurement & > devices & Interfaces and data acquisition does not appear. I read it to appear, but I don't know, because I have nothing plugged, how I said before.

  Any suggestions?

  Thanks for all!

  Joselito.

  Hi Joselito

  Since you have the DAQ Assistant, you obviously have installed DAQmx. What you can do then is to simulate a DAQ hardware. Just open MAX (Measurement and Automation Explorer), klick "devices and Interfaces" then the button create new marked in the picture below. Follow the instructions in the dialog as apperas. I don't know what card you should use, but any M-series you should see you through. All AI channels will give you a standard sine wave and all lines of DI will alternate between high and low.

  

  Best regards

  David

  NISW

• ICC 2.0 supported devices: 3560 and C6807-XL

  Hello

  any news on the full support of Cisco Catalyst 3560 and C6800?

  C6800 can be managed, but there is no info on flexible interfaces, device...

  C3560 can be managed but get "the collection failed" and no data is available for interfaces.

  pi_update_2.0 - 3.ubf and pi_dev_pack_update_2.0 - 13.ubf has been loaded.

  Thanks in advance.

  WS-C3650-48PD

  Your wire said "3560.  This model is supported with PI 2.0.

  But your "sh version" shows your switch to be a "3650.  Two different models, but because the 3650 is a newer model, it is not yet supported by PI2.0.

  Not sure if 3650 and 6800 will be supported when ICC 2.1 get the release.

• Firepower supported devices

  There are differences in supported features of firepower for the series 2 and 3 materials. Is there a clear vision of what devices are series 2 and 3 series which devices?

  Material series 2 are the oldest brand devices Sourcefire. They were all end of 2012 sales or more.

  They include the following models: 3D500, 3 D 1000, 3 D 2000, 3 2100, 3 D 2500, 3500 3, 3 4500, 6500 3.

  All other dedicated NGIPS devices can be considered as the 3 series.

  (Modules ASA power of fire and any new firepower 9300 and 4000 series is in a separate category and neither series 2 or 3).

• How can I replace an existing application on iTunes created with PhoneGap to a new version created with Adobe DPS? I get a "supported devices" error message when I try to download on iTunes! Help!

  I created an application using PhoneGap, a couple of months and have now just modified using Adobe DPS. But when I come to download on iTunes, I get the error message "this bundle does not support or more than one device supported by the previous version of app" How can I fix it?

  I suspect that your PhoneGap app was reported as running on iPad and iPhone. You will need the same DPS. You can do it in AppBuilder at the beginning of the wizard where he asks what kind of devices you want to take in charge. Note that this is only available to customers of DPS Professional and Enterprise. If you are a client of creative cloud creating a simple editing application it supports iPad.

  Neil

• Support-device unknown streaming

  In the network and sharing Center on my laptop under the option of streaming media, there are a few features titled "unknown device".  It is said, "allowed access by using the default settings" under their title.  Should I remove them?  I also have a feature called "XBox 360"; I've never owned an XBox?

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, you have found the unknown devices under the option in network and streaming media sharing Center.

  Please, try the steps below and see if it helps.

  • Go to Control Panel > network and sharing Center >change advanced sharing settings.
  • Then you must make sure that:

  - Network discovery is on
  - Printer & file sharing is turned on

  • After that, click on media streaming options
  • In the bar of menu display devices , select all networks
  • You should see some devices/peripherals strangers.
  • Double-click on each unknown device to see the MAC address of the device.
  • Allow devices that you own or want to share media files with this device.
  • The devices that you don't have or don't want to share you want to remove these devices from the list.

  Come back and let us know the State of the question, we will be happy to help you. We, at tender Microsoft to excellence.

  Kind regards

• Why Olympus does not appear in the list of profiles of lens for my camera Stylus Tough TG-4?  List of Adobe supported devices includes this camera.

  The Olympus Stylus Tough TG-4 is one of the cameras supported by LightRoom CC2015.  In the develop Module, under correction lenses, profile, Olympus does not appear as one of the choices on the list of lens manufacturers no longer when you work on a .jpg or .orf (Raw) picture.  How choosing a camera for correction lenses if is not on the list?

  Hi MauiMan,

  Please see the article for more information.

  Work with lenses profiles in Adobe Camera Raw, Photoshop and Lightroom

  Hope that helps.

  Kind regards

  ~ Mohit

• 105-no supported device detected wireless broadband? I still got my card "Broadband"?

  I have a DV2910US a day (today) I restart the computer and wham, what is happening. I removed the wifi card nothing, I reset bios nothing. Can someone help me please on this weird problem!

  Roadran322 wrote:
  

  Thank you very much for helping me to PEPE999, I have a phoenix bios, it manifests the Phoenix of words and I can also get to the bios.

  It might be useful: http://forums.mydigitallife.info/forums/25-BIOS-Mods

• Please connect a supported device. Help please?

  I have a Dell N5110 with Windows 7 Home Premium 64-bit and webcam is integrated. I also tested with an external USB webcam, but I get the same results.

  So far, I have uninstalled/reinstalled the webcam, drivers updated and tried the regedit fix posted by Igor on the link below.

  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/c8f56336-2fcf-4103-AC19-2f30ab5578b6/

  I did a clean boot, checked for programs that can use it, but aussient Task Manager to control the Process Explorer. In addition, I don't have the facial recognition software installed, which I know can be a problem.

  The error in the title appears when you open Dell Webcam Central and Skype. To testmycam.com, I get a blank white screen.

  HOWEVER, when I run the Webcam Diagnostics on the link below with the 64-bit parameter, the light of my webcam and it works!

  http://www.FiveSign.com/downloads/program/webcam-Diagnostics_29430_1.html?affChecked=1

  I've never had a problem with my webcam with one of these until a few weeks ago and I can't think of any significant changes I made to the system since then. I'm a little confused on what to do next, any help would be appreciated. Let me know if more information is needed, I'm sure I've forgotten something. Once again thanks in advance for any help.

  Thanks for the help. I decided to restore my system to factory default, after saving my files on an external drive, of course, and the webcam now works well.