myDAQ recognized as USB flash firmware

Similar Questions

• USB-9171 installs as USB Flash Firmware Updater

  I just got a USB-9171 with 9401 module.  Try to install it on a laptop Dell Vostro 64 bit WIndows 7. LabVIEW 8.5.1, which works very well with a USB-6212 for awhile is already installed.  I installed the 9.6 NOR-DAQmx that came with the new 9171 and the time of execution of Labview 2012 such as recommended by the Update Manager.  The connection of the USB-6212 he loaded the driver, he recognized in MAX and will work as before.  But plug it in the USB-9171, identifies the driver loaded by Windows as USB Flash Firmware Updater.  The 9171 does not appear in MAX.

  How can I get the USB-9171 driver appropriate to load?

  Thanks - Steve

  Found a solution by calling the service tech.

  Unplug the USB device.

  With the help of MAX, go to tools > reset Configuration data.  This will erase the MAX configuration and restart.

  MAX aperture.  Open the Windows Device Manager.

  Plug the device.

  In the beginning, I received the ball from Windows saying that it successfully installed USB Flash Firmware Updater.  But then on hold while the window updated Device Manager (it flashed several times), he said the right device (cDAQ-9171) as well as the module I connected on the cDAQ-9171, which is a 9401.

  The tech service rep explained that there is a service called Windows device charger OR who must load the appropriate driver, but sometimes the service may stop too soon.

  In any case, I tried all the things here before, but what was different this time was seen both MAX and the windows Device Manager open at the same time before connecting the unit (after wiping of the configuration).

• Disk recognized as usb flash external hard drive

  I have an old Samsung SP0411N IDE internal hard drive, I am trying to use as an external hard drive with a SATA & IDE adapter USB & eSATA Conceptronic csatai23u. Windows XP with Service Pack 3 detects the etc. of Sata to usb etc, but instead to detect the hard drive, it detects a usb mass storage, which according to me, that means a usb flash key. The connection has worked before, but I don't know how to make it work again. The last time it worked Windows says that it has detected a "Samsung SP0411N disk drive". The device does not show in my PC.

  Hi EduardoGB,

  -Are the other devices is recognized without any problems?

  See the section "my hard drive connected to the CSATAi23U is not detected by my computer" from the link below:

  http://www.Conceptronic.NET/site/desktopdefault.aspx?TabIndex=2&tabid=410&PC=CSATAI23U

  Also try to download and install the software for the product from the link below:

  Downloads

  Additional reference on:

  CSATAI23U

• USB Flash will not be recognized in Windows 10

  I have 1 UltraFit 64 GB, bought last month. It's work very well and smoothly until a few days ago.

  Suddenly, the disc not recognized in my windows laptop 10. I see it in the Disk Manager, but I can't assign a letter, cannot format or do something else.

  I tried 3 other laptops with Windows 10. just noluck

  I tried 2 other laptops with windows7, it should work normally

  I tried on my NAS MyCloud, there work.

  I've created boot on my friend laptop (windows7) then try to start my computer laptop. it's working normally.

  So I think that my USB flash only have problems with Windows 10

  The Bank refused to help me, because they all use windows7 and have no problem with my usb drive.

  You guys can suggest me how to solve this problem?

  Thank you very much.

  You run the last update to win 10 AU? There are jobs everywhere in the Internet of devices USB not recognised in WIn 10 but from what I can find, it seems, the issue has been resolved in the latest version of win 10 to THE.

• USB flash drive receives an error "volume does not contain a recognized file system" in Windows 7

  I plugged my USB on a windows 7. He always invites me to analyze and correct or cancel. I cancelled each time, but I got bored with it popping up each time, so I said to investigate and fix.  A loading screen came so I waited patiently. After that it asks me to format my USB flash drive. I can't format it but because I have files from work to home and all my other personal files out there. So I cancelled the format, but every time that I plug it into my computer it asks t format. I even plugged in on a computer running windows XP and wanted to get in shape. When I try to run it without formatting as it is said, "E:\ is not accessible. The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted. "My question is... what we Windows 7 to my USB and how can I recover my data?

  This is common with USB drives used on different operating systems. It happens alwaysto me when I use my drive to work (which is managed since my MacBook Pro) on Vista and Windows 7 client computers. Like you, I learned the hard way you must cancel the digitization of Vista/Win7. The only thing to do at this stage is to connect the player to a computer that can read the files OR use the software of data recovery on it to get the files. I believe that Recuva can do it for free. Format the Flash DRIVE, then start again. Either way, you don't want to use a USB key as a single backup of important files because - as you have unfortunately discovered - stuff happens.

  http://www.Piriform.com/Recuva

  http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• USB flash drive not recognized and install

  USB port works fine in my computer, I have Windows vista basic with acer laptop
  but when a usb flash drive is inserted it not recognize and install
  unitentified error of device and driver to the generic sound of end error

  pls help

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  See you soon. Mick Murphy - Microsoft partner

• USB Flash drive problems

  I have a USB key that does not work. It's a drive 8 GB flash USB 3.0 which has been formatted and works on my Macbook Pro. The problem comes when I try to use it on a Windows device.

  When I format it under OSX Extended it appears under Windows but is empty.

  When I format it in FAT, under Windows it says that the device must be formatted first

  Either way, when I go to format the device on Windows it says that is only 200 MB space

  Any help would be appreciated.

  If you want to use a USB flash drive on the cross-platform (Win, Linux, OSX) computers you have the next chance:

  -MS-DOS (FAT) format:

  

  If you want to start the drive on a PC or use it with older versions of Windows, you may also need to set the partition to the Master Boot Record (MBR) for full compatibility Windows scheme:

  • Click the drive, and then select the tab "partition".
  • In the "Layout of the score" dropdown, select "1 Partition".
  • Click on 'Options' and choose "Master Boot Record" as the type of partition, then click 'OK' and 'apply '.

  Format discs very quickly, although the total time required will depend on the size of the drive.

  The file system resulting is compatible with all versions of Mac OS X, Windows 95, 98, Windows XP, Vista, 7, Windows 8, Windows 10, is one of the most widely recognized and usable file system formats. What makes FAT ideal of the file system to use for external hard drives or USB flash drives that are designed for use in environments with multiple operating systems.

  ATTENTION! The main drawback to the use of FAT32 is the file size limit, which limits the files on the drive to be 4 GB in size or less. If you need single files to be larger than 4 GB, use exFAT, even if you lose compatibility with older versions of OS X and Windows.

  -Format in NTFS and use a program like Paragon NTFS on your Mac ($ 15/20).

• Satellite, L9W Click-Mini-B does not start from the USB flash key

  I have a mini click L9W - B.

  * What I'm trying to boot from a bootable USB key.

  I tried different sizes (1 GB to 32 GB), different manufacturers (without name and brand) different systems (for example. Linux distributions, rescue, antivirus, Acronis Rescue sticks), EFI sticks and non - EFI.
  All USB keys to start correctly on my computer desktop and even with my other laptop.

  * The Mini Windows 8.1 updated, the current version 1.70, in the BIOS BIOS are Secure Boot and TPM , which I've also tried a variety of combinations. The stick will be recognized in the start menu, the name of the USB device is displayed.
  I click on "USB", the Mini restarts, the reader is addressed (the LED flashes at the stick) is launched but not USB, but even once the HDD / SSD.

  If Windows starts, the key works fine. It matters little that, two USB ports, I use, or if the docking station is connected or not.
  If I restart Windows - settings - settings of PC - update / restore - restore - Enhanced start - use a device - try EFI USB Device, which is exactly the same thing happened.
  who can help?

  I hope that there are German support. -Hopefully, there are German-language support.
  If this isn't the case, please contact me.

  Message has been translated

  I don't know what is the problem here, but it turns out that it is certainly possible to boot from the memory stick bootable USB flash.

  Many users have been abele to boot from the memory stick USB external flash, but it is necessary to disable the secure in the BIOS boot option.
  Also if you want to install an unsupported UEFI system, the boot mode must be changed of UEFI in the CSM.

  by the way: it's English language community

• Some USB flash drives REFUSE to work in this 40TL963B

  Hi all. I recently bought a new 40TL963B and so far I have found nothing wrong with her.

  Except that... when I listen to it all the Satellite channels, I noticed thay were very different from my FreeSat box. Duplicate the layers, randomly arrested... etc. It made me want to not use the built-in satellite feature.

  However, I found a program called ToshibaEdit which allowed me to manually change all the digital channels on the TV. Grand... I though. Until I met this problem-->

  Inorder to change the ads, you must copy the TV channels on a USB flash drive, you can edit them on your PC. Now, it took me AN HOUR to do, because of two flash readers I used, none of them worked... I kept getting a "Write Fail" error. WTF?

  The disks are formatted in FAT32, one is a 8 GB is 2 GB.

  Finally, I tried an external 2.5 "USB 120 GB hard drive. Even if the disc is defective... This WORKER. I expect flash drives to work, to be honest, but all of them... the external USB hard drive worked.

  In any case, I spent another hour sort channels, until I was ready to transfer the data back. And. Yes... the same problem. This time, I received an error "failed to read". Again, tried the external USB HDD... worked the first time.

  Now, this HARD drive is faulty, so he'll be thrown... so I'm going to need a flash player to do it again if something happens.

  And then... can ANYONE tell me why on Earth two appropriate, fully working almost brand new USB flash drives REFUSE to work in this TV, but a former, fairly well defective USB external drive MADE? In addition, the same flash drive that I tried to copy the data from digital channel with was also used for a backup of the Firmware... and it WORKED perfectly. It works also for use with the media player.

  While this TV has a hatred of Flash drives all of a sudden?
  Anyone can shed some light on this?

  In addition, very quickly, TV seems to lose its TV settings every time that I bring the TV out of Eve. I'm going to the TV Dynamic and adjust all the settings, but he returned to AutoView and all settings back to 0. Is it a fault or is there something I need to do to 'save' the settings per channel?

  Any help at all will be appreciated greatly.

  Hello

  > And then... can ANYONE tell me why on Earth two appropriate, fully working almost brand new USB flash drives REFUSE to work in this TV, but a former, fairly well defective USB external drive MADE?

  AFAIK the 40TL963B TV supports a common HS USB 2.0 interface and memory flash can be formatted in FAT16 or FAT32 file system. So there is no specific requirement for USB flash memory

• Toshiba 40SL733g - how do I play video files from USB flash memory

  When I plug my USB key into the USB port, menu Media Player comes with two options: Photos and settings.

  How can I make my TV recognize and play video files from USB flash memory?
  Flash is on FAT32.

  I tried to play avi, mp4 and mkv files, but nothing happens. It seems that flash is empty.

  Could you please help me solve this problem.
  Thank you!

  bzunic, have you updated the firmware your model?

  With my own game, (32RL900A), the notice said that some of the buttons of the remote control are "unused", however, after the first update of the firmware, the "unused" buttons have been used, (in our case, record, Time Shift and so on).

  Is the reason why I talk about this, these features became available after an update of the firmware and not included in the manual of the user, in our case, and a subsequent download of the instruction manual for our model actually gave instructions for the use of these features, which have been presented as 'not available '. in the manual original instructions supplied with the TV, but became available after the update of the firmware.

  Let us know how it works...

  donhe7

• Satellite L675 - 11 H - cannot access and/or played on USB flash drive files

  Hi all

  I recently bought a Toshiba Satellite L675 - 11H and tried to transfer files from a USB Pendrive on my hard drive from Toshiba. The files were already transferred from my old laptop (HP - XP) on my USB flash drive.

  Unable to access the USB flash drive to any of the USB ports that I connect my new laptop flash drive. What could be the problem here? Thank you for your help or tips!

  Hey Rush,

  Can you post more detailes about this behavior? What happens if you connect your laptop HARD drive, you don't see that Windows installs the drivers for the new USB device or do you have an error message? If you have connected the USB check of Windows disk management if she s recognized there (Control Panel > system and security > administrative tools).

  Have you tried other USB devices such as USB mice? If they don t work too the problem might be connected to the USB ports. In this case, you must delete all the USB ports on the Device Manager and restart your laptop. Also the chipset driver update might help.

• USB flash drive has not not found on the computer

  Original title: Flash Drive operations

  They gave me a flash driver allows to display certain information, I put it in my USB Port, it lights up, but nothing appears on my screen to indicate what he. I went to the computer, but do not see

  any removable device for a flash drive option. How to open this to display information on the USB

  Hello

  1 have USB flash or external drives readers have worked on your computer?
  2. what operating system is installed on your computer?
  
  Method 1:
  You try to run the Fixit.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  If you are using Windows 7, you can follow the methods mentioned below.
  Method 2:
  Run the troubleshooter of material and check what is happening.
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   
  Method 3:
  You can check under diskmgmt.msc, whether or not the USB received a drive letter. If not, then try to assign one and check. Follow the steps.
  (a) open computer management by clicking the Start button, clickControl Panel, clicking system and security, clickingAdministrative Tools, and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) in the left pane, click disk management.

  (c) if the flash drive recognized in disk management and if there is no drive letter assigned, I suggest that you do a right click on the drive and assign a drive letter.

  (d) click the drive to change and then click change drive letter and paths.

  Do one of the following for the assisgn drive letter.

  • For letter an if it has not already received, clickAdd, click the letter you want to use and then click OK.
  • To change a drive letter, click change, clickassign the following drive letter, click the letter you want to use, and then clickOK.
  • To remove a drive letter, click Remove, and then clickYes to confirm that you want to remove.

  Check this link for more information:

  http://Windows.Microsoft.com/en-us/Windows7/change-add-or-remove-a-drive-letter

  Method 4:
  You can also check in the Manager of device if the device is in the list.
  a. connect the device to the computer.
  b. to open Device Manager, type devmgmt.msc in the start search box and hitEnter.
  c. check if the device drive is listed.
  d. in Device Manager, expand the device listed in the device list.
  e. If the device is listed, right click on it > click Properties.
  f. in general, look under device status for the message. After back if there is no error message.
  See also:
  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device
  
  Method 5:
  As all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.
  
  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:
  (a) click Start and then click Control Panel.
  (b) click System and Maintenance, click System, and then click Device Manager.
  Note: If the control panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  (c) in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".
  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.
  (d) repeat step 2 to uninstall all items under 'USB Bus controllers'.
  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.
  If you are still having the same problem then you can check the device USB drivers updated using windows update. See the following link for assistance.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  If the edge of the question persists I'll ask allows you to check the chipset driver updates you find on the manufacturer's website. The chipset drivers normally integrate USB controller drivers as well.

  I hope this helps.

• does not detect not USB flash drive? __

  USB flash drive does not detect not?

  Hi AwaisAmarQazi,

  ·        He recognized before?

  ·        Do you remember recent changes made to your computer before the show?

  1. check if the device is detected in Device Manager. Follow the steps to go to the Device Manager

  a. Click Start, type devmgmt.msc and press to enter.

  b. Locate the name of the device

  2. try the steps lying in the link below: why my computer doesn't detect my new USB device when I run Windows XP or Windows Server 2003? :http://support.microsoft.com/kb/314634

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to transfer pictures to a USB flash drive

  Export images from the computer to the USB flash drive. How do reformat you the Falsh player? How I have several pictures on a USB flash drive?

  1. nothing displayed on the screen.  Someone told me to click on my computer, but I don't have my computer icon in my Windows vista.

  2 How do you reformat a USB flash drive?

  Thank YOY.

  1. nothing displayed on the screen.  Someone told me to click on my computer, but I don't have my computer icon in my Windows vista.

  2 How do you reformat a USB flash drive?

  Thank YOY.

  ===========================================
  If nothing happens when you insert the disc in a
  USB port, you may have a problem with automatic playback:

  Windows Vista-
  How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  Also try to go on... Start / computer... If the drive is
  inserted into a USB port, it must be recognized as a
  drive letter. (Example: removable disk (h :)) If you))
  Right-click on the drive and choose... Explorer... it should
  display the directory of the drive.

  You can copy and paste or drag and drop on the hard drive.
  Also, you can open a folder and click right one selected
  Group of files, then from the menu choose...
  Send to / removable disk (h :)) (check the drive letter)

  See the following article for information on formatting:

  Formatting your memory card, flash drive or device:
  http://KB.SanDisk.com/app/answers/detail/A_ID/312

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to export photos to the photo gallery Windows on a USB Flash drive

  I can't transfer photos from the photo gallery on a USB flash drive, it can be done, but I need help

  The following steps may be worth a try:

  In... Photo Gallery, select the pictures you want to add in the flash player.

  The group selected (highlighted) right click and choose... Copy.

  Reach... Start button / computer... your USB key must be recognized by a drive letter.

  Right-click on the drive letter that represents the flash drive and choose... Dough.