mydaq with bench hand vernier

Similar Questions

• iOS 9.3 do bluetooth hands-free connection to my Audi stuttering. Using google maps with instructions of the Tower burn on bluetooth still works very well. It's an iPhone 6. Another 6s to 9.2 iOS iPhone works very well with the hands-free bluetooth.

  iOS 9.3 made connection kit hands free bluetooth to my Audi stuttering.

  Both the speaker and the stuttering/pulse microphone so that you cannot speak/hear.

  Using googlemap-app with instructions of the Tower burn via bluetooth still works very well, his is perfect.

  It's an iPhone 6s and the car is an Audi A6 2010 with the Moose Bluetooth adapter business.

  Another 6s to 9.2 iOS iPhone works fine with bluetooth hands-free, just like my phone before the upgrade.

  I tried to disable the twinning, remove all old in the car and the iPhone and pair Bluetooth devices again.

  Anyone alse experinceing this?

  And tip on how to fix it?

  I have the same problem with Audi Q7 2008 and iPhone-6s - iOS - 9.3.

• I bought a phone with the hands

  I bought a phone with the hands and it is related to ayklaudu, the seller told me nothing about it and turn the phone on I asked Apple ID and password, but I can't find it, what should I do? : c

  Take the picture of this phone and post it here.

• With the help of myDAQ with LabVIEW 2012

  LabVIEW 2012 allows the myDAQ? When I run LabVIEW 2011 I can use the DAQ Assistant in LabVIEW and LabVIEW 2012, I do not see the DAQ Assistant Express VI. I've seen drivers does not support LabVIEW 2012 on the site, but I was wondering if anyone knew a way to use the myDAQ with the 2012 version. The myDAQ runs well on my version of 2011, but my students use the 2012 version and are struggling to make it work. I hope that they do not have to reinstall LabVIEW 2011.

  Thanks in advance

  LabVIEW 2012 support has been added with NI ELVISmx 4.4.  You can download and install the driver, which will install DAQmx 9.5.5 and ELVISmx 4.4 support for LabVIEW 2012, allowing you to use the DAQ Assistant and myDAQ in this version.

• What equipment do I need to be able to shoot with my hand in photoshop?

  Is it better to draw concept art and draw anything in photoshop or illustrator?

  Is it possible to draw by hand in photoshop?

  What equipment do I need to be able to shoot with my hand in photoshop?

  You seem to be very mixed on the subject.

  Photoshop is a computer application and you can use it to produce digital art.

  A Tablet is an alternative to a mouse to post information, such as the lines in the computer, including Photoshop.

  

  All digital artists use a Tablet, but some use a tablet that also functions as the screen of the computer, as the range of Wacom Cintiq

  

  Some people do their work of original line on paper and the scanner into the computer where they 'Ink' lines.  You use any way works best for you:

  Offering you the computer is Windows based there (and not Mac) is an amazing app called lazy Nezumi Pro which greatly facilitates the work of your line.

• Droid with Link hands-free Kit

  I've matched just my Droid with the handfree link in my Honda.  Can I make a call with the HFL, but the Droid transfer sound/mircophone to the car.  So after placing the call with the HFL, I struggle to pick up the phone to talk.  All phones paired with the HFL, connected, send all calls to the HFL.  Have I not wrong setting?

  When I paired my Droid with my hands-free Pilot Link I did define anything, just made discoverable, founded a login, a password and it worked.  Perhaps remove the hands-free connection and try again matching to see if it works.

• Move a view of document with the hand tool is locked at the edge of window

  I know it must be simple, but it can not know!

  When I try and move a corner of my document opened with the hand tool in the center of the document window in CS5 with zooming, it stops on the edges and does not move inward more. It is sometimes more convenient to be able to work on a corner zoomed in a document when it is centered in the document window. If I go to the rotation tool and set a slight angle, then I can place the document to anywhere in the window to any magnification! Is there a setting that locks the document at the edge of the screen with zoom?

  Thank you, David

  OK, so if I understand your home machine works very well, it is your work machine that has the problem.

  Can I suggest you add this key to register in accordance with instructions, but if it persists, it is a hardware or software conflict that I can't begin to guess.

• Bluetooth does not work with the hands-free after iOS 9.3.1 on 6s

  Question so that evacuation here... Hello apple, invite you me several times to upgrade to the latest version of the software and I finally do after two weeks of incessant pop ups and now my phone became unusable with connection handsfree on three high-end cars (both brands of cars from 2007, 2010 and 2015 ", which confirms that it is a matter of apple).  I have a 6 s and have just updated to 9.3.1.  Before the update, everything was fine now, I have constant clipping making it impossible to use.  This means that I can not make calls hands free which is obviously a problem in relation to the laws of conduct.  I'm trying to get by using a headset or speaker of the iPhone, but it's bad news.  Note people are ranting on this matter in all directions.  Do you have a recommendation?

  You talk to Apple by posting on this forum, only users such as you. Please provide your feedback directly to Apple at this link: http://apple.com/feedback

• Comparison of the data in the new thread in parallel with the hand

  I have a file of main sequence. Overall, I got a call from sequence that initializes an oscilloscope and returns to the hand. Next main action, I have the user turn on power supply and confirm with a popup message. My question is now, I need to create a new thread before action "light food" for the oscilloscope intercepts all overloads and continues to record. So if this is the case, what I'm trying to do is:

  Call sequence Initialize oscilloscope

  Call sequence oscilloscope Fetch

  Message Popup, power supply turns on, confirm with "OK".

  -Now, since the user disabled on food, I need compare all data, even while the user turns on the power and clicks "OK" and after.

  So, I need an oscilloscope running in parallel and by comparing data during execution of the main sequence. Any help would be appreciated.

  The type of call sequence step has an option of a sequence of sub in a new thread.

  Call sequence Initialize oscilloscope

  Sequence oscilloscope Fetch call (call in a new thread and it will acquire signals until it gets a signal to stop to the main following)

  Message Popup, power supply turns on, confirm with "OK".

  Delay if necessary

  Set the signal to stop the thread close.

  I hope this helps.

• Problem with my hand cursor: it shows three small hands

  Hello

  I have worked for many years with CS4 and now all of a sudden my hand cursor appears as three small hands in a row. I don't know what went wrong or how to fix this. Help, please

  Bert

  Right-click on your desktop and click screen resolution

  

  Then click on make the text and other elements more or less

  

  Then click set text size custom (PPP), click in the box of the rule and move the rule up until he said 149% just above the rule.

  

• Anyone know how to simulate moving water with your hands using Kinect? (As Milo)

  I would like someone to help me with this... I have to do an application contact with water and to simulate movements... like 'milo '... It's what I hace to do something similar there! Please, help me! and I apologize to you for my English, I'm not so good!

  Anyway, please, help me!
  Thank you!

  Hello

   
  I suggest you to contact Xbox support for assistance.
  Here is the link:
  http://support.Xbox.com/en-us/Kinect?XR=shellnav

• How can I configure my SPACEBAR to play in the timeline panel instead of panoramic with the hand icon?

  In my workflow, I'm used to the use of the space bar to play in the timeline, but when I put in Flash CS5 Flash CC level, the functions of the space bar as the hand icon to move to the workspace. How can I assign the space bar to play in the timeline?

  Edition > keyboard shortcuts > control > play

• Called vi with one hand, it does not stop

  Hi all

  I try to call a vi of a principal, I have succedded to call the vi but I couldn't stop the main vi and the called vi does not stop and disappear. Where I did wrong?

  LabVIEW follows a model of data flow for execution of vis a block diagram node runs when it receives all the required inputs. When a node is running, it produces output data and transmits data to the next node in the path of the data stream. The flow of data on the nodes determines the order of execution of the VIs and functions on the block diagram. Source

  Once you have called your Subvi, your main VI is pending so that it ends before it can move to the next State in the state machine which is the reason why it will not stop.  If you want to run a separate VI, you can call an asynchronous mode

• Help with second hand blackberry blackBerry Smartphones

  Hi I just got a blackberry 8300 off ebay and when I try to configure my account e-mail, that it says ' an account already exists for this PIN"what it means, I can't use the email on the phone feature or is there a way around it, thanks

  You ask the previous owner to, or call the carrier yourself and ask nicely, having removed the previous owner account PIN. Ask nicely, that they don't have to do it for you.

• The use of attenuators with myDAQ

  So I try to use an Attenuator (from mini-circuits, BNC 50 ohm) output on the myDAQ for tensions in the microvolt range.  However, rather than mitigate it, the signal of clips instead. I tried a unity gain buffer, but the signal still clips. I used just an Agilent FG and the Oscilloscope, and it worked then.

  Anyone know how I can fix this problem so that I can use these attenuators on the myDAQ?

  Thank you for your time.

  Hello Mochipoo,

  There are some limitations that you should consider before trying to drive this attenuator. A 50 Ohm 3dB Attenuator is designed to divide the amplitude of the voltage from a source of 50 ohms to 70.7%. It is basically a load of about 150 Ohms resistance.

  -Your benchtop FGEN has an output impedance of 50 ohms, but the myDAQ AO is a much lower impedance (about 1 Ohm in DC). The voltage divider, you would get a lot less attenuation (150 ohms / [1 Ohm + 150 Ohm] ~ = 99%.)

  -10V in this attenuator driving requires a lot of current (10V / 200 Ohms = 50 mA, in the case of the bench; 10V / my 150 Ohms = 67 in the case of AO myDAQ).

  -AO myDAQ lines have current limits to protect against overheating and prevent violate the USB power specification. The limit is approximately 2.4 mA, so if you try to drive a 150 ohm load with her, you'll shake very low (approximately 0.3 V - 0.4 V).

  -As you describe, you can buffer the AO myDAQ with an external amplifier line, but if you use the myDAQ +/-15V rails, you should be aware of their current limits (once again, included to avoid thermal damage or technical violation USB). Our specifications operational is +/-16 my symmetrically on +/-15V or 32 my on one of the rails. They work above that, but they have current limiters which will be deliver around 60-75 my. I suspect that's why you see your clip of signals in the buffer. In addition, several amplifiers have current limits internal between 20-50 my if they may not be able to drive much output in any case that.

  If you just try to take small steps to exit, I recommend you build your own divider of resistance with impedance that will not engage the limiters of AO myDAQ (such as the total of 10 kOhm load). You can do the mitigation of the factor what you want with the ratio. If the output impedance that results is too high for what you're driving, you may refresh the split signal. Since you are not driving a heavy load, you won't have the problems of limitation of power.

  In addition, be aware that there are two beaches of operation for the AO myDAQ: ± 10 v and ± 2V. They are the two 16-bit resolution, so you can get 5 x more small steps only by using the range 2V.

  I hope it's useful. Good luck and let us know if you have any other questions.

  Charles Y.

  National Instruments