MyFinePix Studio no longer works and try to uninstall it says that ytuploader.dll is still in use
problem deleting YTUploader.dll
Someone has a problem with Fujifilm MyFinePix Studio where the process of update no longer works and advise to reinstall the software? If the software is uninstalled it cannot be completely removed because the file "YTUploader.dll" is still used by a program. All attempts to remove this file and the Fujifilm folder that contains the Program Files directory failed.
Someone has any advice on how to get rid of this file?
The general opinion of MyFinePix Studio is that he wrote very well and better to avoid, so I now use another Photo management Package.
Hi RobertKenyon,
Follow these methods.
Method 1: Follow the steps in the article.
Problems installing and uninstalling programs on Windows computers
http://support.Microsoft.com/kb/2438651
Method 2: Perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.
Tags: Windows
Similar Questions
-
* Original title: download windows 8
When I download windows 8 and try to install it says that we can not connect now, check your internet connection but my internet is good?
What download link you use. ? The only one I know is installation media to create for Windows - 8.1 help Windows .
Given that support for Windows 8 ends, I'd do a 8.1 of Windows Installer Clean , following the procedure in step 4 to activate Windows 8.1 using a product key of Windows 8. It gives the default product key to install, after which, you can use your key to activate.
-
After that I have to redeem my code and try to download it says that it is impossible to open the page.
Available downloadable Setup files:
- Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
- Captivate: 8 | 7 | 6 | 5.5, 5 | 1
- Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
- Lightroom: 6| 5.7.1| 5 | 4 | 3
- Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
- Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
My Flash Player no longer works and I have to re - download many that he twice daily. What's wrong?
I checked to see if it is on and it is always. I deleted temporary files. When I try to download it, I always get a message that I do not have enough privileges to complete the download. Then when I check, it still works very well!
If you are in a corporate environment where you don't have administrator rights on the machine, you should have a chat with your friendly neighborhood computer guy; However, I'm guessing that this is not the case.
If it's your home machine and you are an administrator, this is a good indication that the file system is damaged. It is not really good news, I'm sorry.
Let's start first of all, if you have something important on the machine, now is a great time to save somewhere. Removable disk, web storage, no matter. When the file system starts to get wobbly, he could simply be badly timed power outage or something, or it could be a first indication that your hard drive is going to bite the dust soon. Having lost my fair share of readers, I recommend you to take the warning as a gift and make a backup. Of this is way less painful than the alternative.
Once your valuables are secure, and your seat is in position, locked and trained, will search for and fix something wrong with the file system.
Check your hard disk for errors - Windows 7:
https://support.Microsoft.com/en-us/KB/2641432
At this point, take the nuclear option and manually purge every bit of Flash Player in the system.
(Note: these instructions are for Win7 and lower grades.) "If you're in Win8 or later, we'll talk more before doing anything.)
Perform a new installation of Flash Player on Windows:
https://forums.Adobe.com/thread/928315
My guess is that you will get to a stage that you can't achieve because you do not have the permissions to do so, even if you * have permission.
If it's deleting a file, usually a utility like Unlocker will repair it for you, at which point, you can delete the file and complete uninstallation. It was probably the damaged file. If you couldn't clean it as admin, our installers have not been able to touch either.
Unlocker - download reviews and free software - CNET Download.com
If it is a registry key, you have bigger problems. There are commercial third-party utilities that are supposed to do magic registry fixes, but Windows includes its own audit of the registry and repair tool which is already not fixing the issue. I'll leave to you to experiment with those if you want, or if you just want to do a complete reinstallation of the operating system and applications. Whatever it is, something's wrong with the underlying operating system. Personally, I tend to be skeptical about the utility of spare parts, and if it has been a few years, you will probably be surprised to see how fast the machine after doing a fresh install of the OS.
Hope that helps.
-
Java suddenly no longer works on Firefox, even though it says that it is enabled
Just today, I noticed that Javascript and everything about Java does not work on Firefox. I looked away, uninstalled JavaFX, reinstalled Java 3 times, tried everything, but no matter what, Java will not work, and Firefox will report that the Applet works well.
I am running the latest version of Firefox, as well as Java SE7 U17, which is the latest version of Java. Is it possible to fix this? In addition, Java also stopped working on my computer itself, but it is more noticeable on Firefox where I can't use drop-down menus or videos that require Javascript (it either makes me "Plugin/file not found" or it will not load). I still can't view YouTube videos.
Do not take into account.
Problem resolved itself after a day of waiting and reinstall Java while restarting the computer inbetween uninstalling and reinstalling.
-
I have tried everything I can think and suggested in your base of knowledge, but FF does not open. I downgraded to a version earlier, but which did not help so I uninstalled everything and did a clean reinstall of the 7.0.1. I restarted at every stage.
However, when I tried to put my favorite chrome (so I could continue to work) he says that FF was opened. Same thing when I went to uninstall. The Task Manager is not running. Chrome works is not my internet connection.
I have not installed a new software or hardware recently, although I've improved Roboform to the latest version. This is the reason to update to FF addon RF was not compatible with the version of FF I used.
I scanned for virus and the machine is clean.
I'm on a PC running Windows 7 Home Premium. Right now I'm working on my old laptop but I need to FF works on my main machine.
Any help much appreciated.
Thank you
Kathy
-> Recovery of data from an old profile
Check and tell if its working.
-
So basically, I downloaded the ISO of Windows 10 file and installed using boot camp. During installation, I accidentally formatted the Mac OS partition and replaced with the windows one. Now, I'm trying to reinstall Mac OS using the internet retrieval feature. I partitioned a new D: drive named OSX, and there is no data on the disk. I then click on reinstall Mac OS. I try to select the disc of OSX I partitioned, but it says that the disk is locked. Anyone know how to unlock the drive or should I do something else?
Thank you very much
CJ
I think one of the problems might be that my Windows partition has replaced the C: drive where was the OSX partition. I tried to move the Windows operating system on a drive b or e :), but it won't let me. Let me know if this could be a problem too.
-
my copy of CS4 is not allowing me to open it, whenever I have it try state that the license is no longer works and gives an error code: 6. this problem occurs on my laptop works fine my office copy [from the same CD, etc.]
Exit code: 6, Exit Code: 7 Installation error - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
The problems with the Setup logs. CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for more information on how to review your Setup logs
-
Original title: Netflix in windows media center, connection problems
I saw disorder connect to Netflix on windows media center. I am running windows vista x 64. When I select the icon of the login screen appears, but when I try to connect it comes up with the error message "there was a problem of signing. Make sure your internet connection is working and try again. "my internet connection is fine and I can connect to http://www.Netflix.com/, so this problem should make windows media center, but I can't understand it. I have updated windows and windows media center and I'm still having this problem. Thanks in advance for any advice.
The most likely explanation is NetFlix changed something in their routine of authentication (i.e. SOAP structure or just a URL string, whatever) and who broke the Vista NetFlix WMC client. It did not affect the web interface of NetFlix because operated a NetFlix service, they were obviously aware of the change pending and adjusted their web client to use the new method.
Customer WMC NetFlix in Windows 7 (which is a new product), was probably already coded to use the new method. The client in Vista has continued to work with the old method, until NetFlix finally stop this method. Microsoft, slow to react and to assign developers to fix the Vista NetFlix WMC client missed the deadline and Vista users have been in the dark for a while.
That's pretty standard for web services that cross corporate barriers. Particularly involving slow mega-body like Microsoft. A company change a routine and the other has to play catch-up. Communication is often difficult between the divisions within a company, between companies, it is often non-existent.
The level of prissy whining in this thread was good for a laugh however. Those threatening to cancel NetFlix: rolleyes: your access was still working on their Web site. You were not without service, just, without the convenience of WMC. People grumble at Microsoft... anyone know if Microsoft was still knowledgeable of * when * NetFlix was going to turn off the old authentication? If they were told the night before (or any) "Hey let's turn off the old authentication routine" what kind of response do you expect? How long is it since the problem began, 28 days? It's actually a pretty fast for an element relatively low priority. Or it could just be that NetFlix reactivated their old methods of authentication as a temporary solution to this problem (they share a part in creation) until Microsoft can respond formally with an update.
Now if Microsoft was duly informed advanced evolution of the service, still dragged feet (quite possible) I don't give them no slack. But at the end of the day, it is always a matter of low priority. It's fixed now, be happy until the next time that Netflix change their authentication routine.
-
My last Firefox no longer works and I can't fix it. I use Windows 8. I made the mistake of downloading DuckDuckGo. He immediately took over as my default browser and it would not allow me to change back. I realized that I had something that I had not needed so I tried to remove it. It took a morning full of accomplish this chore. I went back to Firefox and found that my tabs were there, but they were opaque and would not work. In fact, you could read what was beneath them. No way to get anything wthout return to the start page of Firefox. I uninstalled Firefox and put it back on and it was always the same thing with the non operation of the opaque tabs. Troops you have good ideas as to how I can get my Firefox working again?
The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
Note: This will make you lose all the Extensions, open Web sites and preferences.To reset Firefox, perform the following steps:
- Go to Firefox > help > troubleshooting information.
- Click on the button 'Reset Firefox'.
- Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
- Firefox opens with all the default settings applied.
Information can be found in the article Firefox Refresh - reset the settings and Add-ons .
This solve your problems? Please report to us!
-
OK, here's what happens to me at the moment and it makes me already started.
When I play Flight Simulator 2004 and when I'm at CYYZ or other airports, such as landing or taxiing at the airport like a few minutes, whenever my video no longer works and it retrieves.
Here is what I did to solve the problem but no results
- Reinstalled FS2004
- I have no Add on secernys or something else
- Tried to lower the settings to min.
- Updated the FS2004 to 9.1
Here are my PC specsDell Inpirson 530Windows 7 32-bit home2.40 GHz Intel Core 2 Duo254 MB video, ATI Radeon 2400 or 2600 XT HD (not sure)3 GB RAMY at - it something I can fix this, I really hope that if I can fly again.Hello Vansers,
1 have you tried the steps proposed in the above items to solve this problem?
The link given in the lower part is to bind to the Flight Simulator community to post your question there. The link worked when I tried to open. However, I post the link once more. Here is the link:
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think. -
host process no longer works and removes my default printer
Host process no longer works and removes my default printer. I need to reinstall my printer software for vista down a few hours later.
Hello
-First check with the printer manufacturer for updated drivers and problems as well as their forums (if any).
Download - SAVE - go to where you put them - click on - RUN AS ADMIN
If this did not help.
I would REBOOT and when the computer stabilizes after a few minutes, and then remove the printer.
Then REBOOT again and go through this troubleshooting and only after he re - install the
printer. Be sure to install the latest drivers.Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer===============================================================
What is rundll32.exe and why it works?
http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/What is the suspicious Rundll32.exe process?
http://WindowsXP.MVPs.org/Rundll32.htm-----------------------------------------------------
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------
If no joy trying to determine what is the cause:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see who are loading is method 2 - using MSCONFIG, then post a list
of these here.--------------------------------------------------------------------
Tools that should help you:
Process Explorer - free - find out what are the files, registry keys and other objects processes have
Open, which DLLs they have loaded and more. This exceptionally effective utility will show same
you who owns each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured so that it starts automatically when your system
boots and you login. Autoruns shows you the full list of registry and file locations where
applications can configure Auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Startup Type
(Registry/Startup folder), Command - Line String, the product name, file Version, company name,.
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
I tried to use my Photoshop CS after a long period of non-use and he said "need to reactivate the program but I not activate - then the activation of the phone no longer works and the screen says that it was more long then 30 days if the program will not even start righteous outputs photoshop so I can't use the Help menu - I went to the adobe Web site and logged into my account and it lists my Photoshop CS as. activated in 2011 - which I guess is when I activated it - does - what I do?
-
When I download the creative application of cloud and he finished it seems to be a bit of problem the app section, it says something like: the installation no longer works. You must uninstall and reinstall the creative cloud. But I already do that and it doesn't seem to change anything.
Hello
Please remove Creative Cloud app and Adobe Application manager using the-
Install the cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html
-
I bought and installed Lightroom 6. It works but there is a message saying that my trial period has expired and when I try to log in to Lightroom on my iPad it says the same thing. How can I fix it? I got a trial of Lightroom CC before I installed.
allen456 wrote:
Is there anyway that I can go to CC without losing all my investments in Lightroom 6?
No, it is not AFAIK. You can try back LR 6 and then buy the subscription of photographers. You will need to contact Adobe about this.
Note that this is not Adobe. This is a user to user forum.
Do a search for Adobe product return.
Maybe you are looking for
-
Before I installed the version 9.0.1 on my iMac, each site in my favorites has its own icon. Given that I have installed the version 9.0.1, all icons except the generic folder icon disappeared.
-
Satellite Pro L10: Is it possible to get a copy of the original installation discs
Hi I'm new to the forum. Is it possible to get a copy of the original installation for my laptop Toshiba Satellite Pro L10 diskettes? ConcerningAnno2
-
What is the difference between V2.01? I flashed on my new laptop computer. A few hours after, I realized that brightness setting does not. I did a lot of clean installs and installs / many uninstals with different GPU drivers, but nothing helped.
-
Missing driver - port Serial PCI?
I'm missing a driver, an exclamation point next to "Serial Port PCI" Device Manager. I tried update from HP.com chipset, but this does not solve my problem. Cold you help me to find the driver I need? Hardware ID: PCI\VEN_8086 & DEV_297B & SUBSYS_281
-
Need drivers for laptop Hp 1235dx/entertainment
Hello. I have Hp Pavilion dv5-1235dx Entertainment Notebook I've updated to Windows 8.1(64-bit) I need the drivers for the same... Please guide me to the correct drivers Thanks in advance