MyHP Pavilion p6120f primer, transforms itself constantly power.

Similar Questions

• My HP Pavilion zv5240 running WindowsXP SP3, its power off suddenly by itself after running for 20-30 min. eventhough works on economy mode. What is going on?

  My HP Pavilion zv5240 running WindowsXP SP3, its power off suddenly by itself after running for 20-30 min. eventhough works on economy mode. What is going on?

  This could be an overheating problem.  If your CPU overheats, then the power will suddenly cut to your computer.  Boot safe mode starts with less processeses and running tasks and so your computer can run more fees.  Since you get 20 to 30 minutes, the way to check this is to download and run freeware 'CoreTemp '.

  <>http://www.alcpu.com/CoreTemp/ >

  It displays the temperature of your CPU and show you if it is not too hot before you stop.

  The two main causes of overheating are fans of CPU does not and a build-up of dust in your computer that acts as a blanket and causes overheating.   If overheating is your problem, open the case, check the appropriate fan and buy a can of compressed air to blow the dust bunnies.

  Another possible cause is bad RAM (memory) memory modules.  Try to remove and re - insert your RAM modules.  There are also tests of RAM, you can run - although they tend to be CPU, so you won't know if you have a RAM problem or a problem of temperature.

  HTH,

  JW

• The graphics upgrade cards because I have a HP Pavilion p6120f

  I have a HP Pavilion p6120f. I want to upgrade the graphics card to run modern games. Can someone help me? My current one is a chipset family.

  noelalmanza wrote:

  I have a HP Pavilion p6120f. I want to upgrade the graphics card to run modern games. Can someone help me? My current one is a chipset family.

  Hello

  http://support.HP.com/us-en/document/c01746794

  PCI x 16 graphics card slot

  Buy a VGA compatible PCIe x 16. It's in your pocket and compatibility with the operating system.

  https://www.Google.co.UK/webhp?SSRP=1#q=PCIe+x16+best+graphics+card

  You can install the new card into the slot, connect the monitor and one integrated turn off.

   

• . My Pavilion P6837c primer not. F9 and F11 do not work.

  Good day, my 15 month old Office Pavilion primer not.  During a hard stop and start - the HP window open (with the F11options F9) - but does not respond to one.

  The next to come and screen says

  2.1 build 083

  1997-2000 Intel Corp.

  IS COVERED BY 1 OR MORE OF THE FOLLOWING PATENTS

  SERIERS FAMILY IDE CONTROLLER

  V.1.22 C03/16/10

  R:2 C D7 27 24 62 23

  GUID, 3738 CD68-31589F10-34EO-74F01C4B26BA

  SELECT PROPER BOOT DEVICE

  MEDIA IN KEY SELECTED BOOD DEVICE, THEN PRESS

  THEN NOTHING.

  COULD REALLY USE HELP HERE - JUST SHOCKED THAT A HP PRODUCT WAS GOING TO DIE SOON.  OUR WHOLE HOUSE IS HP ALL.

  LOOKING FORWARD TO ASSISTANCE.

  Thank you

  BRIAN

  Hello Brian,.

  Are you able to get into the BIOS of the machine? After pressing the power button immediately start typing to the F10 on the keyboard key.

  If you are able to enter the BIOS and reset the default settings to see if that helps.

  If you are not able to enter the BIOS, then you want to clear the CMOS on the motherboard. On the motherboard is a rider.

  This jumper allows you to clear the Real Time Clock (RTC) RAM in the CMOS. To clear CMOS, follow these steps:

  1. turn OFF the computer and unplug the power cord.
  2. Locate the marked jumper CLR_CMOS.
  3. move the CAP from pins 1-2 (by default) to pins 2 and 3.

  
  4. wait 5-10 seconds, and then return the jumper on pins 1-2.
  5. you can now restart the PC.

• HP Pavilion 500-550nv: the upgrade of power

  Hello. I have HP Pavilion 500-550nv (in which case is microtour format) and want to upgrade my HP power which is only 180 W!

  I want to know what brand of food is supported for my pc model (hp pavilion 500-550nv) and how much wattage recommended (up to 600? up to 650?). Which is the recommended limit of power supply of power for my HP?

  I'm waiting for your answers. Thank you

  Hello @jeandoumpier,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I read your post on food and wanted to help you!  I understand that you are concerned about upgrade options.

  You should be able to improve the power you want.  The Office should take but a lot of power, it must, food that is installed.  Just check that the power supply to use, firmly enters the tower.  Based on the Specifications of the product, you can find the dimensions tour here:

  • Height: 36.7 cm (14,48 in.) unpacked

  • Width: 17.5 cm (6.91 inches) unpacked

  • Length: 38.9 cm (15.35 inches) unpacked

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Pavilion g6t-2300 CTO select: seeing power HP Pavilion is still on even after closing down and the battery won't charge no - 10 Windows

  My HP Pavilion power LED is still even after closing. I disabled option quick start, but the problem was not fixed. Another problem is the battery will not charge if it is showing connected. My OS is wondows 10. Please help me. Thank you.

  Hello

  Please try the following fix:

  https://www.CNET.com/forums/discussions/help-my-PC-with-Windows-10-wont-shut-down-properly/

  Kind regards.

• Pavilion 6654: 6654 update video card/power HP

  I'm interested in upgrading my video card for an ATI Radeon HD 4200 to a course "EVGA GeForce GTX 960 SuperSC ACX 2.0 + 2 GB memory GDDR5 128 bit PCI-E 3.0 Dual-Link DVI - I, 3 x DP, SLI, HDMI and HDCP, G-SYNC ready graphics 02G - P4 - 2966 - KR.  This graphics card will suit for my cpu and will work properly with the motherboard?

  I'll add 4additional giggabites to increase the total memory (RAM) to 8 GB so connected.

  And besides, I will buy a 400W power supply.

  Will this work for my current 6654 Pavilion?

  Thank you!

  mackgeary88 wrote:
  

  Thanks for the quick response. My computer is...   HP Pavilion p6654y desktop PC.

  You are welcome!  Thank you for the additional information.

  As I suspected, your computer has a standard BIOS.  This means that you can buy an older video card.  I love EVGA products.  I suggest to find a card you like and contact Tech Support from the manufacturer (Technical Support EVGA 1-888-880-3842) in order to ensure that it will work on your computer.  It is the best way I found to do not have to make a return.  The last card done EVGA used a standard BIOS was their 640 GT.  Some of them have a update for the VBIOS that allows them to run with a standard BIOS.

  Now for the power supply (PSU).  I love Corsair products.  I normally recommend at least 500W.  This allows for future updates.  A modular power supply is good for smaller cases.  Simply use the required cables, allowing a better air circulation.  You must measure the existing PSU and compare the measurements to the one you choose.  All connectors must be compatible.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Pavilion dv7-4080us: reminder of hp power cable

  In announcement regarding August 26, 2014 of a recall program on the cords power supply for HP Laptops:

  August 7, 2014, my PC Pavilion dv7 stopped working and I took it to Best Buy, where the problem resulted in a bad cord.  I bought a spare for $58,84 power cord at this time.

  In December, I received an email from Hewlett-Packard communicate me of the recall program.

  I called the telephone number explaining that I wanted to get a refund for my power cord, because I had been forced to buy a power cord prior to notification of the publication.

  After having been approved around Department to Department and seen a few different numbers to call - with no satisfaction, I turned on this forum for help.

  It is true that I am just stuck?  Even if my power cord was really faulty, because I needed my power cord until HP Announces I want just the cost to cover me?

  Someone on this forum had this experience?

  The callback is made to the cord that goes from the brick on the wall.

• HP Pavilion 6500 goes out when the power adapter plugged

  My Pavilion 6500 (specifically dv6623cl) turns off when I plug in the power adapter. If I plug it in, then turn on the laptop, it automaticly turns off before loading windows. If the laptop is already started, and I can plug the power adapter, it immediately turns off. I can charge the battery without any problem, also while the laptop is turned off, but as soon as I turn it on with the adapter plugged it stops, I checked the battery through HP battery check and he said its good, he is holder of a charge very well and everything, the only change made to the laptop hardware wise was an upgrade memory I had no such problems until the upgrade of memory, but I do not see how it would affect the power on the aspect, in order to make a system restore, if ever, I need, the poweradapter must be plugged and theres other system functions that require the adapter complete, it is a question that must be corrected

  any ideads what the problem would be?

  any help is much appreciate

  Thank you, rayandmaura

  Talk to a jury of uselles / forum, do those who seek info on how to reset / bypass the bios password on their (or anyone elses) computer or something as it gets 20 pages of answers, but asking a power / card issue and your luck if you get a response at all,

  I'll just give up to deal with this useless community and just buy 3 extra batteries and remind all of the accused

• HP Pavilion Elite HPE-130me: upgrade of power

  Hello

  I need to improve my diet with plu wat 460w currently in my HP Pavilion Elite HPE-130me nvidia gtx 260 NVIDIA 980 graphics card upgrade

  Please advice which food to buy?

  Thank you

  Hello

  Try the Corsair CX500, CX600 or CS550m as they are the same dimensions are the power supply in your PC. The CS550m would be my choice.

  Know what the return policy is before you buy anything.

  Consult this publication of the article.

• Pavilion p7-1414 pc: I forgot power on password (password of the bios)

  Bios password changed (power) but forgot it. allows me to try 3 times then crashes with no error code, is there a work around?

  Hello:

  Please see the link below (clear password settings), and there is incomplete instructions to clear the BIOS password.

  http://support.HP.com/us-en/product/HP-Pavilion-P7-1400-desktop-PC-series/5295962/model/5297007/document/c03343058/

  These are the instructions changed to clear the password... they left a few steps outside.

  To clear the password BIOS follow these steps

• HP Pavilion 15-n241ca: HP Pavilion 15-n241ca computer laptop administrator/power on password help

  Everytime I turn on my laptop it ask an administrator password or power on password that I don't know if he's stuck. I have try 3 times and it gives me "system disabled [87603014].

  Model laptop is HP Pavilion n241ca 15.

  @jamietmacdonald

  Enter 38761030

  Kind regards

  DP - K

• HP pavilion p6 2310: upgrade of the power supply

  I was wondering if this diet will enter my pc hp pavilion p6 2310

  http://www.NCIX.com/detail/EVGA-500W-80-plus-certified-5F-92643-1563.htm

  Power supply I want

  Hello

  The standard ATX HP power measured 5.9 by 3.4 by 5.5.  As posted by your link shows a good fit.

  An examination revealed a problem of quality control but the other customers looked good.

• HP Pavilion dv6-3212nr: HP Pavilion dv6-3212nr Admin password or power on password

  Support I remember more power on password for my HP Pavilion dv6-3212nr.

  the stop code: 67502609

  THX

  Hello

  Enter: 78460229

  Kind regards

  DP - K

• Windows XP Home Edition on HP Pavilion a708n desktop computer stops during power on, reads disc once then powers

  Hewlett-Packard Pavilion a708n with Windows XP Home Edition operating system.  I press the power on switch, HP light lights, then a flash of light yellow for the access to the disk, and then off as if I had pressed the on-off switch.  No display on screen.  Power switch is turned off unless I unplug the power supply cord until the green light on the back of the unit turns off.  If I reconnect the power cord, the computer starts as if I had pressed the button / stop playing a disc made, then turns off.  Only change I made before, was that I plugged the power cord directly to wall outlet instead of a surge protector. Maybe a power surge corrupted a file?  The computer is running daily since 2003 without incident, then, of course, that I don't remember what I did with my Wincows XP Recovery disk.  Is it possible that I can make a recovery CD, or do I have to take my computer in a store?

  Hi windbill,

  It seems that there is a power supply for the computer problem.

  I suggest that you wake the computer to the local computer store and check if all cables are connected properly and the computer power supply is correct.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.