myRIO FIFO data switching

Hello.

I am new to LabVIEW and myRIO. I'm designing an acquisition and treatment system for the sync. I have 4 four signals 400 Hz sinusoidal, acquired by four 4 analog inputs being implemented on the FPGA, write the data to a FIFO. On the side of RT, I read these data and draw. The problem I have is the plot of switching, and I think it's a switching between channels of data. I tried to delay the writing process, the initialization of an array and forcing the correct order of writing, increase in the size of buffer, and neither solve them the problem. What could be the problem? The correct order is: Stator 3-> reference, reference-> 1 stator, Stator 1-> 2 Stator and Stator 2-> 3 stator

Thanks for your help.

BJoa.

Solved!

In the configuration pop-up the 'open FPGA VI reference', uncheck the "Run the FPGA VI".

Tags: NI Software

Similar Questions

  • Will you be able to put Mobile Data Switch ON or OFF option in the shortcut bar.

    Hey Apple team of Directors,

    Nice day. IAM a () and iPhone user since Iam using Apple iPhone 6 and 6 s of 2010 go, I have a small suggestion to do an install IOS mentioned below,

    If you can bring MOBILE DATA SWITCH ON / OFF option of shortcut bar, then it will be very useful for all the iPhone users. Could you please take my kind request to the extra level for the activation of this option.

    Thank you.

    Best regards;

    Mithun *.

    < personal information under the direction of the host >

    Hello! logic you s! How can you turn on a device if it is off with the shortcut bar? It is not possible! turn off the only is possible

  • DMA with FIFO data acquisition

    Hi all

    I would like to ask you a favor to get some help to understand FIFO.  I have attached the files here and simply the target more basic FIFO of host data transfer.  I put the required number of elements to 4095, I understand the depth of the FIFO on FPGA.  The sampling rate in FPGA is 10 kHz.  The loop on read host rate is 10 ms.  The depth in the host FIFO.configure is 10000, which I think is the number of items in the part of host of the FIFO DMA memory.  So I guess that the total thickness of the FIFO is 14095 elements.  I put the points of reading in each iteration to 2000 points.  However no matter how to change the combination and number of points to read, the program performs an iteration and then displays a different error message.

    Can someone please help me understand how to calculate each parameter and to optimize it, if the sampling frequency I want on FPGA is data of 10 kHz I16?  Thank you very much.  I appreciate your help!

    Best,

    Charles

    I have attached all the files here, which is very similar to the example on ni.com

    Charles Hey,

    Regarding the second question, it's what I wanted. I'm not 100% sure how the constraint point converts a dbl in unsigned int, so it would be good to use a node of conversion and to probe this value, to ensure that you get the value you expect.

    As for the second question, I told you that you should wiring in a contstant-1 in the field timeout of your fifo method on the RT VI and VI FPGA read.

    Thank you

  • CRIO-9066 FIFO data conversion problem

    I'm having a problem with a multiple element SGL FIFO on a cRIO-9066 where data is not read correctly.  Here is the configuration:

    I have two Host - to - Target FIFOs, identical except for type: FXP is the other SGL.  Both are 16-element.  Data SGL which are read turns a conversion error.  A sample minimum (2014 for the 9066) project is included.

    The example works fine if the FIFO SGL 1-element; something more big fails.  Is not supported on the same 9066 thought that the project allows the creation?

    Thank you

    David

    It seems that maybe it's a bug in the Simulator.  Exit the simulation mode, run it on your target and watch the interactive mode in this way.  The results are what you expect.  It is strange that they would be converted at some point.

  • Source of data switching / sphere in the same thematic analysis / Pivot / Chart

    Hi gurus,

    Here's my business case.

    Y at - it an easy way to disassociate an analysis / dashboard / graph of the data source / sector of activity?

    I have an existing dashboard, with guests and PivotTable dynamic, executed on a data source Essbase. So far so good.

    Now, I need to dynamically change the content of my PivotTable, as well as the new data from a source of different data (an RDBMS like SQL Server for example) displayed in the same PivotTable.

    If it is clear enough, suppose that I have given weekly on sales by region and product lines.

    Actual data is stored in a model of schema-similar to a star of RDBMS, and the Budget figures are stored in an OLAP (Essbase) engine.

    I'm not trying to display two digits at the same time, so I don't think that the Union would do the trick.

    I just want to sort of/switch to toggle between data sources, move the duct by a prompt value / variable.

    Who is?

    Thank you!

    Laurent

    Hello

    a union would do it, just give everyone an extra field - "Datasource" with the value of 'Oracle', 'Essbase', ' etc... »

    Then put your extra field in a page, the position in a PivotTable, or filtered by a line of dashboard, or else...

    Simple!

  • BlackBerry smartphone Data Switch Assistant Palm Desk Top 4.2

    I am running windows xp version 2002 service pack 3 and when I try to run the Data Selector Wizard is not allowing me to select Palm Desktop 4.2 version to go with. Is there a solution? Can it be done?

    I finally updated the 6.2 palm software and then I have sinc the palm with outlook and then with the blackberry - thanks for putting me on the right track

  • Data in FPGA application channel switch

    Hi all

    I use cRIO 9074 and NI 9234 to collect data of vibration with FPGA mode. However, I found the data I collected were some strings under tension. For example, I have two NI9234 modules (8 channels). I found the first channel may have the value of the data that should be in channel 8. It happens randomly. And also, the swich channel happens between data points (sometimes around 50,000) already. I think the switch happens in time real VI when I read the FPGA FIFO data. I used the structure of stream flow data from the real-time host controller network. In the host vi, I can save the data when I need to.

    The screen is suddenly I joined the one 62123 samples, there are 3 samples shows the value of the other channels.

    I have attached my programs. Hoping someone here can help me out. Thank you.

    Remember to see your problem. The "greater or equal" Don t make sure that the number of elements is divisible by 8. The way I'm going to do is to check the number of items on the buffer, divide by 8 and check if the reamainder is not equal to zero, if true the number of items read less reminder, so fake read the number of elements in itself.

  • Toggle fast cellular data (Mobile)

    Someone knows a solution allowing you to quickly switch the cellular data (Mobile Data)? (Something like we toggle wifi, mute, rotation of the screen etc.)

    I tried options in touch to help, but could not find. And nothing in the center of both control

    iOS - iPhone 9.3.2,and 6

    Instead of telling us how you try to solve a problem (by turning the cellular data switch), it would be much better if you told us what the question.

  • Time and date of the Iphone 6s set contacts automatically / backup

    Hi my name is Rebecca. Please be patient, this is a long story with a question to which Apple for a month and a half has not been able to solve. The end of February, I went to Sprint to upgrade my iphone 6 to a 6 s. (my 6 had no problem). The backup and restore to the other went off without a hitch. Two weeks having the phone, date and the value automatically switched to a GMT setting which is 4 hours ahead of New York. Assumption is that the phone has been deserted. I got a new phone and everything has been backed up and restored again. Less than two weeks later, the same goes for the 2nd iphone 6 s.  I went to Sprint and got a 3rd iphone 6 s. backup and restored all again. Less than a week later for the 4th time, the new iphone 6 s time and date switched to the time zone GMT 4 hours ahead of New York. At this point, I called Apple Tech support. A very nice tech Jason worked with me for 2 weeks to fix this. He sent Apple a 4th iphone 6s. We did a backup and when the new phone came in did us a restore. A few days later, the same problem. Apple accuses Sprint, Sprint complaint to Apple. At this point, Sprint said that my sim card was corrupted and he sent me a new. On the phone with Jason, we did a reset of the iphone 6s failing manufacturers. Removed the corrupted sim card and put in a new vacuum. Phone restarts and when you get to the Setup screen, it asks "set up as a new user or a user to return. Jason said as a new user.  I clicked on new user. Following her request for an apple ID. Jason said I should put in my existing apple id (although it has been activated on as a new user). At this point the phone wouldn't turn on. On the phone with Sprint. They did not understand as to why the phone would not activate. Jason suggested that I put my original sim card in (which was noted as corrupted), then the active phone. At this stage because I had not done a restore, the only information on my phone now an old backup who had my contacts and some of the notes, images etc. Jason said to do a restore after just 24 hours to be sure of the time and the date stay correct. Not happened. Less than 24 hours, the date and time that is set to automatic changed to the GMT time zone. Jason was out of suggestions. We left him there. I am very angry to pay more than $800 for an iphone that feature very very important does not work. On mine, I restored my phone and thought what I'd do. I then did a backup. I'll stop my icloud. I have reset my builders phone by default and when I went through the whole upward I plugged my phone in itunes and restored my phone from my computer backup. (Icloud is always OFF). Less than 24 hours later at the date and time in GMT area again. Once again, that I have a phone very very expensive with a feature that is vital for me, I can't use. Yes, I could turn the machine off, but I shouldn't do that. So here's my question: Iphone 6, I have not had any problems with my icloud or my sim card or the date and time. 6 s IPhone that I do. I got iphone 4 brand new 6s with the same problem. Is - that my sim card is corrupt and transfer information corrupt, though only it worked fine in my iphone 6? Second question: I don't want to sign up for a new apple id and start from scratch. This will screw up my gmail which is linked to the apple ID. How can I back up my contacts only on my computer and then be able to reset my phone manufacturers by default, then erase all information from my existing apple ID in order to use again, but only restore contacts which is the worst part of transfer phones. Apps and notes, photos and all the rest is not a problem to start from scratch, but contact is almost impossible to have to type each hand one by one. Please someone out there with a solution. Thank you in advance.

    Two recommendations.

    1 post this issue on your part on the iphone forum, to confirm the number two with someone else.

    Use iPhone

    2. you must stop working with Apple. Your iPhone download the signal giving them news of the time and origin of this signal

    I have no idea, but it's not from Apple. Coming here or talk to Jason you wasting your valuable time. It is at least

    get paid for it, you're not. Every second that you type in this position, mine or every second you spent on reading

    the phone with Apple after the second phone had the same problem you've wasted talking to the wrong party. Even than calling your

    manufacturer of furnace you paid 5000 for oven when your gas is not delivered on time or bad quality. And I have

    don't say it's Sprint, cause I don't know, but it's something that gives this info to your phone.

  • iPhone used 6 4 MB of data in 30 seconds

    My phone uses a large AMOUNT of data very quickly.

    I have "Cellular data" off at anytime and use wifi when available. I also have all my apps toggled off for data. Automatic downloads are at large, and in "iTunes & App Store," use data cell is also disabled also. " At the suggestion of Apple telephone support, I have upgraded to iOS 9.2.1.

    I was away from wifi and wanted to send two emails. I turned on "Cellular data", switched to "Mail" and sent emails. I also downloaded a dozen emails. I then turned off Mail and cellular data. It was used for about 30 seconds, and the use of cellular data for the current year has increased to 4 MB. The emails were not attached-heavy piece.

    Is there something that could be using the data that I'm not aware of, or it could be a problem in the phone?

    Thank you very much

    David

    4MB is a negligible amount of data.

  • Problem in reading the PWM signals in myRIO 1900

    Hi guys,.

    I work with myRIO to generate PWM pulses.

    Here is the block diagram of my circuit.

    I connected external to the analog input pin PWM pin. So I can watch the PWM pulse in the waveform table.

    But the waveform is not clear. This is as shown in the screenshot.

    See that the waveform is not correct. When I'm watching the same PWM pulses in the CRO (cathode ray Oscilloscope, oscilloscope real in the real world), I get exactly the waveform. that is, the PWM pulses are generated correctly. But the analog read is unable to read the PWM pulses.

    I faced the same problem with the pin of analog reading earlier when I read the input voltage. Is not give continuous reading of the voltage input.

    Please guide me how to read these impulses via analog read.

    Please tell me at what frequency range, I can use this myRIO to generate impulses?

    I am able to use 40 kHz?

    Hi rcs.
    The desired pulse frequency is 10 KHz. My sampling rate must therefore 100 kHz, which is not possible in data acquisition mode. There is another problem with the myRIO. Only AI0, BI0 and CI0 has n-sample mode. The analog input pins is still have no n-sample mode. But in my project, I need 4 pins of I in n-sample mode, which is not possible. In addition, the sampling rate should also be favourable, which does not happen in my case. We can say that this is a disadvantage of myRIO with data acquisition mode.
    The only alternative to solve this problem is to use FPGA in myRIO.
    He can taste a 25nS rate.
    But little complexity is there

  • storage of data in real time by program

    Hello

    I tried to solve this problem for a while now and it seems to be no similar examples out there. I'm trying to store data programmatically, firslty by pressing a switch when I want to start taking data and pressing the same switch when I want to stop and save the file. I created an example VI that demonstrates what I want to do; Generate sine wave function inside a while loop infitnite represents data real time acquisition, the other while the loop opens the file and saves the data until the data switch save is pressed again. The file is closed after the loop at the end of execution.

    I did not get this works and if I was hoping if someone could point to me where I went wrong.

    Thank you

    Tip: In programming, always keep the window open context-sensitive help. When you have a problem as the thread cut in the loop of the producer, hover over the wire with the wire tool, and the help context window displays a description of the error. In your case it is said: «Broken wire...» You have connected the two terminals of different types. The type of the source's Waveform (DBL). The type of the sink is a table 1 d of Waveform (DBL)."

    The solution is to make two identical data types.  If you will use multiple channels for your actual data, a table of waveforms (a wave by channel) can be appropriate. If you use only one channel in your VI test, simply use the data type of waveform. The image below illustrates two methods.

    Also, you need not wait (ms) in the loop of the consumer.  The Dequeue function will wait until he has given, and then run.

    Lynn

  • FIFO DMA

    Hello / Hello

    I try to pass some trought DMA FIFO data, but I have a timing problem.

    I hope to read on rt 0 as 1, 1 as 2nd etc...

    Any idea?

    I test data paser (0,1,2, 3.6, 7) since an FPGA to a RT but I can't read the data into an orde fixed kind, the then 1 0 en 1 etc...

    Any idea what's wrong in my code?

    BR/thank you

    Found!

    I read 100 element and write 8 by 8 element, 100 is not a multiple of 8.

    read 80 work item

  • With the help of 2 generators of signals on a FIFO shared

    I have the device of the series M (NI USB-6259) and would create 2 tasks, DO1 and DO2, using subsets of lines on Port 0. The two waveforms will be sinosoidales, that I will store on FIFO of the device. Both tasks will have different examples of two lines PFI clock (clock is 1000 times faster than the other). In addition, the sizes of waveform for two tasks will be different also.
    Once the tasks are started, I want to send the waveform to MAKE FIFO data and the RegenMode set to True in order to eliminate ongoing entries of the computer to the USB/PCI bus FIFO buffer.
    My question is - is the device M-series allow reading of FIFO to DO separately two DO tasks to different sample clocks?
    If the answer is NO, can I disable FIFO for one or two tasks by setting UseOnlyOnBrdMem to True? Are there any device not M-series allow 2 tasks FIFOed DO?
    If the answer is YES, are there settings/options on which must be paid to work? I would have preferred an example of use of Measurement Studio (DAQmx C API).

    Victor

    Hi vicpik,

    I don't know what you mean by sinosoidales referring to digital output lines, do you mean you want to produce trains of pulses with a cycle of 50%?

    The 6259 allows correlated digital i/o on port 0, which means that it is hardware timed but the clock must be from another source.  However, there is only a single circuit of calendar for digital output so that you cannot route signals from multiple locations on different lines.  Thus, two output lines digital correlated cannot have separate examples of clock.

    There is probably a way you can reach your goal with the 6259, but again, I'm not clear on what you mean by sinusoids.  The standard way to write several digital lines at different rates on the same timing system would be to use the lowest common denominator for your clock frequency and generate several samples that needed to create any arbitrary digital signal.  I hope that this makes sense, but please let me know if not.

    The other option, if you need to generate a simple square wave or pulse train would be to use the meter exits the 6259.  Additional information would be useful to determine the best course of action.  Thanks for posting!

    -John

  • Cannot send DIO siganl using the LabVIEW FPGA Module and MyRIO

    Everything works when no FPGA is used. If the circuit and harware work.

    However when targeting module FPGA MyRIO, acquiring data and processing the work and the signal to the engine's 'sent' (visible when executing Hightlight is on).  But there is no tension on the DIO ports used. FPGA projects includes VHDL code.

    Do you know what could cause this problem?

    You must control the OID in the FPGA.

Maybe you are looking for

  • The magic mouse disconnects all working

    Everything working on my Macbook Pro connection bluetooth magic mouse stops every now and then on his own. I have to wait a few seconds before clicking on, reconnect the mouse. It looks like a period of connection, but I can't find an entry in the sy

  • Tecra S2: the mouse pointer jump down to the left

    Toshiba Tecra S2, PTS20E-18S032GR, 01/30/2006 purchase model numberDescription link: http://de.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/selected_product_option.jsp?service=DE&PRODUCT_ID= 106134 & DISC_MODEL = 0 My problem is, that the independ

  • Are Macs the best choice for Finance majors?

    I have the opportunity to buy a high-end 2 month old Macbook Pro to my sister for my son in College next year, with a huge discount. (It is in perfect condition). He'll be with specialization in Finance and colleges all recommend or require the use o

  • Windows Freecell, Solitaire, etc.

    I try to play freecell, solitaire, or any of the games on Windows Vista and I receive a notice of "Critical error": none of his graphic designs suitable found.I tried the turn of windows power features in Control Panel.  He works at this time, but no

  • where is the CMOS on Acer Aspire X 1470 battery?

    Time to lose, but cannot find a battery. It is soldered to the motherboard, or should I remove components to find? No help for tech with a manual!